rt-thread/bsp/ls1cdev/drivers/drv_spi.c

308 lines
7.6 KiB
C
Raw Normal View History

/*
* Copyright (c) 2006-2021, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2017-11-02 first version
* 2018-06-09 zhuangwei add spi0 cs0 support,remove msd_init
*/
#include <rtthread.h>
#include <drivers/spi.h>
2019-08-21 13:42:17 +08:00
#include <rthw.h>
#include "drv_spi.h"
2019-08-21 13:42:17 +08:00
#include "ls1c_public.h"
#include "spi_msd.h"
#include "dfs_fs.h"
2018-03-17 19:03:50 +08:00
#include "../libraries/ls1c_pin.h"
2018-03-17 19:03:50 +08:00
#ifdef RT_USING_SPI
#ifdef DEBUG
#define DEBUG_PRINTF(...) rt_kprintf(__VA_ARGS__)
#else
#define DEBUG_PRINTF(...)
#endif
static rt_err_t configure(struct rt_spi_device *device, struct rt_spi_configuration *configuration);
static rt_uint32_t xfer(struct rt_spi_device *device, struct rt_spi_message *message);
static struct rt_spi_ops ls1c_spi_ops =
{
.configure = configure,
.xfer = xfer
};
static rt_err_t configure(struct rt_spi_device *device,
struct rt_spi_configuration *configuration)
{
struct rt_spi_bus *spi_bus = NULL;
struct ls1c_spi *ls1c_spi = NULL;
unsigned char SPIx = 0;
void *spi_base = NULL;
unsigned char cpol = 0;
unsigned char cpha = 0;
unsigned char val = 0;
RT_ASSERT(NULL != device);
RT_ASSERT(NULL != configuration);
spi_bus = device->bus;
ls1c_spi = (struct ls1c_spi *)spi_bus->parent.user_data;
SPIx = ls1c_spi->SPIx;
spi_base = ls1c_spi_get_base(SPIx);
{
// 使能SPI控制器master模式关闭中断
reg_write_8(0x53, spi_base + LS1C_SPI_SPCR_OFFSET);
// 清空状态寄存器
reg_write_8(0xc0, spi_base + LS1C_SPI_SPSR_OFFSET);
// 1字节产生中断采样(读)与发送(写)时机同时
reg_write_8(0x03, spi_base + LS1C_SPI_SPER_OFFSET);
// 关闭SPI flash
val = reg_read_8(spi_base + LS1C_SPI_SFC_PARAM_OFFSET);
val &= 0xfe;
reg_write_8(val, spi_base + LS1C_SPI_SFC_PARAM_OFFSET);
// spi flash时序控制寄存器
reg_write_8(0x05, spi_base + LS1C_SPI_SFC_TIMING_OFFSET);
}
// baudrate
ls1c_spi_set_clock(spi_base, configuration->max_hz);
// 设置通信模式(时钟极性和相位)
if (configuration->mode & RT_SPI_CPOL) // cpol
{
cpol = SPI_CPOL_1;
}
else
{
cpol = SPI_CPOL_0;
}
if (configuration->mode & RT_SPI_CPHA) // cpha
{
cpha = SPI_CPHA_1;
}
else
{
cpha = SPI_CPHA_0;
}
ls1c_spi_set_mode(spi_base, cpol, cpha);
DEBUG_PRINTF("ls1c spi%d configuration\n", SPIx);
return RT_EOK;
}
static rt_uint32_t xfer(struct rt_spi_device *device,
struct rt_spi_message *message)
{
struct rt_spi_bus *spi_bus = NULL;
struct ls1c_spi *ls1c_spi = NULL;
void *spi_base = NULL;
unsigned char SPIx = 0;
struct ls1c_spi_cs *ls1c_spi_cs = NULL;
unsigned char cs = 0;
rt_uint32_t size = 0;
const rt_uint8_t *send_ptr = NULL;
rt_uint8_t *recv_ptr = NULL;
rt_uint8_t data = 0;
RT_ASSERT(NULL != device);
RT_ASSERT(NULL != message);
spi_bus = device->bus;
ls1c_spi = spi_bus->parent.user_data;
SPIx = ls1c_spi->SPIx;
spi_base = ls1c_spi_get_base(SPIx);
ls1c_spi_cs = device->parent.user_data;
cs = ls1c_spi_cs->cs;
size = message->length;
DEBUG_PRINTF("[%s] SPIx=%d, cs=%d\n", __FUNCTION__, SPIx, cs);
// take cs
if (message->cs_take)
{
ls1c_spi_set_cs(spi_base, cs, 0);
}
// 收发数据
send_ptr = message->send_buf;
recv_ptr = message->recv_buf;
while (size--)
{
data = 0xFF;
if (NULL != send_ptr)
{
data = *send_ptr++;
}
if (NULL != recv_ptr)
{
*recv_ptr++ = ls1c_spi_txrx_byte(spi_base, data);
}
else
{
ls1c_spi_txrx_byte(spi_base, data);
}
}
// release cs
if (message->cs_release)
{
ls1c_spi_set_cs(spi_base, cs, 1);
}
return message->length;
}
#ifdef RT_USING_SPI0
struct ls1c_spi ls1c_spi0 =
{
.SPIx = LS1C_SPI_0,
};
static struct rt_spi_bus spi0_bus;
#endif
#ifdef RT_USING_SPI1
struct ls1c_spi ls1c_spi1 =
{
.SPIx = LS1C_SPI_1,
};
static struct rt_spi_bus spi1_bus;
#endif
/*
* 1c的spi总线
* @SPI SPI总线LS1C_SPI_0 LS1C_SPI_1
* @spi_bus_name 线
* @ret
*/
rt_err_t ls1c_spi_bus_register(rt_uint8_t SPI, const char *spi_bus_name)
{
struct rt_spi_bus *spi_bus = NULL;
#ifdef RT_USING_SPI0
if (LS1C_SPI_0 == SPI)
{
spi_bus = &spi0_bus;
spi_bus->parent.user_data = &ls1c_spi0;
}
#endif
#ifdef RT_USING_SPI1
if (LS1C_SPI_1 == SPI)
{
spi_bus = &spi1_bus;
spi_bus->parent.user_data = &ls1c_spi1;
}
#endif
return rt_spi_bus_register(spi_bus, spi_bus_name, &ls1c_spi_ops);
}
2018-03-17 19:03:50 +08:00
int ls1c_hw_spi_init(void)
{
#ifdef RT_USING_SPI0
pin_set_purpose(78, PIN_PURPOSE_OTHER);
pin_set_purpose(79, PIN_PURPOSE_OTHER);
pin_set_purpose(80, PIN_PURPOSE_OTHER);
pin_set_purpose(83, PIN_PURPOSE_OTHER);//cs2 - SD card
pin_set_purpose(82, PIN_PURPOSE_OTHER);//cs1
pin_set_purpose(81, PIN_PURPOSE_OTHER);//cs0
pin_set_remap(78, PIN_REMAP_DEFAULT);
pin_set_remap(79, PIN_REMAP_DEFAULT);
pin_set_remap(80, PIN_REMAP_DEFAULT);
pin_set_remap(83, PIN_REMAP_DEFAULT);//cs2 - SD card
pin_set_remap(82, PIN_REMAP_DEFAULT);//CS1
pin_set_remap(81, PIN_REMAP_DEFAULT);//cs0
ls1c_spi_bus_register(LS1C_SPI_0, "spi0");
2018-03-17 19:03:50 +08:00
#endif
#ifdef RT_USING_SPI1
pin_set_purpose(46, PIN_PURPOSE_OTHER);
pin_set_purpose(47, PIN_PURPOSE_OTHER);
pin_set_purpose(48, PIN_PURPOSE_OTHER);
pin_set_purpose(49, PIN_PURPOSE_OTHER);//CS0 - touch screen
pin_set_remap(46, PIN_REMAP_THIRD);
pin_set_remap(47, PIN_REMAP_THIRD);
pin_set_remap(48, PIN_REMAP_THIRD);
pin_set_remap(49, PIN_REMAP_THIRD);//CS0 - touch screen
ls1c_spi_bus_register(LS1C_SPI_1, "spi1");
2018-03-17 19:03:50 +08:00
#endif
#ifdef RT_USING_SPI0
/* attach cs */
{
2019-08-21 13:42:17 +08:00
static struct rt_spi_device spi_device0;
static struct rt_spi_device spi_device1;
static struct rt_spi_device spi_device2;
static struct rt_spi_device spi_device3;
static struct ls1c_spi_cs spi_cs0;
static struct ls1c_spi_cs spi_cs1;
static struct ls1c_spi_cs spi_cs2;
static struct ls1c_spi_cs spi_cs3;
/* spi02: CS2 SD Card*/
spi_cs2.cs = LS1C_SPI_CS_2;
rt_spi_bus_attach_device(&spi_device2, "spi02", "spi0", (void *)&spi_cs2);
spi_cs1.cs = LS1C_SPI_CS_1;
rt_spi_bus_attach_device(&spi_device1, "spi01", "spi0", (void *)&spi_cs1);
spi_cs0.cs = LS1C_SPI_CS_0;
rt_spi_bus_attach_device(&spi_device0, "spi00", "spi0", (void *)&spi_cs0);
spi_cs3.cs = LS1C_SPI_CS_3;
rt_spi_bus_attach_device(&spi_device3, "spi03", "spi0", (void*)&spi_cs3);
msd_init("sd0", "spi02");
2018-03-17 19:03:50 +08:00
}
#endif
#ifdef RT_USING_SPI1
2018-03-17 19:03:50 +08:00
{
static struct rt_spi_device spi_device;
static struct ls1c_spi_cs spi_cs;
/* spi10: CS0 Touch*/
spi_cs.cs = LS1C_SPI_CS_0;
rt_spi_bus_attach_device(&spi_device, "spi10", "spi1", (void *)&spi_cs);
2018-03-17 19:03:50 +08:00
}
#endif
}
2018-03-17 19:03:50 +08:00
INIT_BOARD_EXPORT(ls1c_hw_spi_init);
2019-08-21 13:42:17 +08:00
static int board_sd_init(void)
{
#if defined(RT_USING_DFS) && defined(RT_USING_DFS_ELMFAT)
/* mount sd card fat partition 1 as root directory */
if( dfs_mount("sd0", "/", "elm", 0, 0) == 0)
{
rt_kprintf("File System initialized!\n");
}
else
{
rt_kprintf("File System initialzation failed!\n");
}
#endif /* RT_USING_DFS && RT_USING_DFS_ELMFAT */
}
INIT_APP_EXPORT(board_sd_init);
2018-03-17 19:03:50 +08:00
#endif