rt-thread/bsp/at32/libraries/rt_drivers/drv_emac.h

90 lines
4.0 KiB
C
Raw Normal View History

2022-04-08 15:31:35 +08:00
/*
* Copyright (c) 2006-2021, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2022-05-16 shelton first version
2022-04-08 15:31:35 +08:00
*/
#ifndef __DRV_EMAC_H__
#define __DRV_EMAC_H__
2022-04-08 15:31:35 +08:00
#include <rtthread.h>
#include <rthw.h>
#include <rtdevice.h>
#include "drv_common.h"
2022-04-08 15:31:35 +08:00
#define CRYSTAL_ON_PHY 0 /* phy does not with crystal */
/* the phy basic control register */
#define PHY_BASIC_CONTROL_REG 0x00U
#define PHY_RESET_MASK (1<<15)
#define PHY_AUTO_NEGOTIATION_MASK (1<<12)
/* the phy basic status register */
#define PHY_BASIC_STATUS_REG 0x01U
#define PHY_LINKED_STATUS_MASK (1<<2)
#define PHY_AUTONEGO_COMPLETE_MASK (1<<5)
/* the phy id one register */
#define PHY_ID1_REG 0x02U
/* the phy id two register */
#define PHY_ID2_REG 0x03U
/* the phy auto-negotiate advertise register */
#define PHY_AUTONEG_ADVERTISE_REG 0x04U
#if defined (PHY_USING_DM9162)
#define PHY_CONTROL_REG (0x00) /*!< basic mode control register */
#define PHY_STATUS_REG (0x01) /*!< basic mode status register */
#define PHY_SPECIFIED_CS_REG (0x11) /*!< specified configuration and status register */
/* phy control register */
#define PHY_AUTO_NEGOTIATION_BIT (0x1000) /*!< enable auto negotiation */
#define PHY_LOOPBACK_BIT (0x4000) /*!< enable loopback */
#define PHY_RESET_BIT (0x8000) /*!< reset phy */
/* phy status register */
#define PHY_LINKED_STATUS_BIT (0x0004) /*!< link status */
#define PHY_NEGO_COMPLETE_BIT (0x0020) /*!< auto negotiation complete */
/* phy specified control/status register */
#define PHY_FULL_DUPLEX_100MBPS_BIT (0x8000) /*!< full duplex 100 mbps */
#define PHY_HALF_DUPLEX_100MBPS_BIT (0x4000) /*!< half duplex 100 mbps */
#define PHY_FULL_DUPLEX_10MBPS_BIT (0x2000) /*!< full duplex 10 mbps */
#define PHY_HALF_DUPLEX_10MBPS_BIT (0x1000) /*!< half duplex 10 mbps */
#define PHY_DUPLEX_MODE (PHY_FULL_DUPLEX_100MBPS_BIT | PHY_FULL_DUPLEX_10MBPS_BIT) /*!< full duplex mode */
#define PHY_SPEED_MODE (PHY_FULL_DUPLEX_10MBPS_BIT | PHY_HALF_DUPLEX_10MBPS_BIT) /*!< 10 mbps */
/* the phy interrupt source flag register. */
#define PHY_INTERRUPT_FLAG_REG 0x15U
/* the phy interrupt mask register. */
#define PHY_INTERRUPT_MASK_REG 0x15U
#define PHY_LINK_CHANGE_FLAG (1<<2)
#define PHY_LINK_CHANGE_MASK (1<<9)
#define PHY_INT_MASK 0
#elif defined (PHY_USING_DP83848)
#define PHY_CONTROL_REG (0x00) /*!< basic mode control register */
#define PHY_STATUS_REG (0x01) /*!< basic mode status register */
#define PHY_SPECIFIED_CS_REG (0x10) /*!< phy status register */
/* phy control register */
#define PHY_AUTO_NEGOTIATION_BIT (0x1000) /*!< enable auto negotiation */
#define PHY_LOOPBACK_BIT (0x4000) /*!< enable loopback */
#define PHY_RESET_BIT (0x8000) /*!< reset phy */
/* phy status register */
#define PHY_LINKED_STATUS_BIT (0x0004) /*!< link status */
#define PHY_NEGO_COMPLETE_BIT (0x0020) /*!< auto negotiation complete */
#define PHY_DUPLEX_MODE (0x0004) /*!< full duplex mode */
#define PHY_SPEED_MODE (0x0002) /*!< 10 mbps */
/* the phy interrupt source flag register. */
#define PHY_INTERRUPT_FLAG_REG 0x12U
#define PHY_LINK_CHANGE_FLAG (1<<13)
/* the phy interrupt control register. */
#define PHY_INTERRUPT_CTRL_REG 0x11U
#define PHY_INTERRUPT_EN ((1<<0)|(1<<1))
/* the phy interrupt mask register. */
#define PHY_INTERRUPT_MASK_REG 0x12U
#define PHY_INT_MASK (1<<5)
#endif
#endif /* __DRV_EMAC_H__ */