libs/rt-thread
libs
/
rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
rt-thread/bsp/stm32f10x/stm3210e_eval_lcd.c

502 lines
14 KiB
C
Raw Normal View History

Re-normalizing the repo
2013-01-08 22:40:58 +08:00
/*
* File : stm3210e_eval_lcd.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2009, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2009-11-01 Bernard the first version
*/
#include <rtthread.h>
#include "stm32f10x.h"
#include "stm32f10x_fsmc.h"
#include "stm3210e_eval_lcd.h"
#ifdef RT_USING_RTGUI
#include <rtgui/driver.h>
#include <rtgui/color.h>
/*
* LCD Driver
* RGB mode (5-6-5)
* 240 x 320 pixel LCD
*/
/* convert rtgui color to hardware color, rgb 5-6-5 */
typedef struct
{
rt_uint16_t LCD_REG;
rt_uint16_t LCD_RAM;
} LCD_TypeDef;
/* Note: LCD /CS is CE4 - Bank 4 of NOR/SRAM Bank 1~4 */
#define LCD_BASE ((rt_uint32_t)(0x60000000 | 0x0C000000))
#define LCD ((LCD_TypeDef *) LCD_BASE)
/*******************************************************************************
* Function Name : LCD_WriteReg
* Description : Writes to the selected LCD register.
* Input : - LCD_Reg: address of the selected register.
* - LCD_RegValue: value to write to the selected register.
* Output : None
* Return : None
*******************************************************************************/
void LCD_WriteReg(rt_uint8_t LCD_Reg, rt_uint16_t LCD_RegValue)
{
/* Write 16-bit Index, then Write Reg */
LCD->LCD_REG = LCD_Reg;
/* Write 16-bit Reg */
LCD->LCD_RAM = LCD_RegValue;
}
/*******************************************************************************
* Function Name : LCD_ReadReg
* Description : Reads the selected LCD Register.
* Input : None
* Output : None
* Return : LCD Register Value.
*******************************************************************************/
rt_uint16_t LCD_ReadReg(rt_uint8_t LCD_Reg)
{
/* Write 16-bit Index (then Read Reg) */
LCD->LCD_REG = LCD_Reg;
/* Read 16-bit Reg */
return (LCD->LCD_RAM);
}
/*******************************************************************************
* Function Name : LCD_WriteRAM_Prepare
* Description : Prepare to write to the LCD RAM.
* Input : None
* Output : None
* Return : None
*******************************************************************************/
void LCD_WriteRAM_Prepare(void)
{
LCD->LCD_REG = R34;
}
/*******************************************************************************
* Function Name : LCD_WriteRAM
* Description : Writes to the LCD RAM.
* Input : - RGB_Code: the pixel color in RGB mode (5-6-5).
* Output : None
* Return : None
*******************************************************************************/
rt_inline void LCD_WriteRAM(rt_uint16_t RGB_Code)
{
/* Write 16-bit GRAM Reg */
LCD->LCD_RAM = RGB_Code;
}
/*******************************************************************************
* Function Name : LCD_ReadRAM
* Description : Reads the LCD RAM.
* Input : None
* Output : None
* Return : LCD RAM Value.
*******************************************************************************/
rt_inline rt_uint16_t LCD_ReadRAM(void)
{
/* Write 16-bit Index (then Read Reg) */
LCD->LCD_REG = R34; /* Select GRAM Reg */
/* Read 16-bit Reg */
return LCD->LCD_RAM;
}
/*******************************************************************************
* Function Name : LCD_DisplayOn
* Description : Enables the Display.
* Input : None
* Output : None
* Return : None
*******************************************************************************/
void LCD_DisplayOn(void)
{
/* Display On */
LCD_WriteReg(0x26, 0x3C); /* 262K color and display ON */
}
/*******************************************************************************
* Function Name : LCD_DisplayOff
* Description : Disables the Display.
* Input : None
* Output : None
* Return : None
*******************************************************************************/
void LCD_DisplayOff(void)
{
/* Display Off */
LCD_WriteReg(0x26, 0x0);
}
/*******************************************************************************
* Function Name : LCD_SetCursor
* Description : Sets the cursor position.
* Input : - Xpos: specifies the X position.
* - Ypos: specifies the Y position.
* Output : None
* Return : None
*******************************************************************************/
void LCD_SetCursor(rt_uint32_t x, rt_uint32_t y)
{
LCD_WriteReg(0x06, (x & 0xff00) >> 8);
LCD_WriteReg(0x07, (x & 0x00ff));
LCD_WriteReg(0x02, (y & 0xff00) >> 8);
LCD_WriteReg(0x03, (y & 0x00ff));
}
/*******************************************************************************
* Function Name : LCD_CtrlLinesConfig
* Description : Configures LCD Control lines (FSMC Pins) in alternate function
Push-Pull mode.
* Input : None
* Output : None
* Return : None
*******************************************************************************/
void LCD_CtrlLinesConfig(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
/* Enable FSMC, GPIOD, GPIOE, GPIOF, GPIOG and AFIO clocks */
RCC_AHBPeriphClockCmd(RCC_AHBPeriph_FSMC, ENABLE);
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA|RCC_APB2Periph_GPIOD | RCC_APB2Periph_GPIOE |
RCC_APB2Periph_GPIOF | RCC_APB2Periph_GPIOG |
RCC_APB2Periph_AFIO, ENABLE);
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8;
//<2F><><EFBFBD><EFBFBD>
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_Init(GPIOA, &GPIO_InitStructure);
GPIO_ResetBits(GPIOA, GPIO_Pin_8);
//<2F><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6;
GPIO_Init(GPIOC, &GPIO_InitStructure);
GPIO_SetBits(GPIOC, GPIO_Pin_6);
/* Set PD.00(D2), PD.01(D3), PD.04(NOE), PD.05(NWE), PD.08(D13), PD.09(D14),
PD.10(D15), PD.14(D0), PD.15(D1) as alternate
function push pull */
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_4 | GPIO_Pin_5 |
GPIO_Pin_8 | GPIO_Pin_9 | GPIO_Pin_10 | GPIO_Pin_14 |
GPIO_Pin_15;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
GPIO_Init(GPIOD, &GPIO_InitStructure);
/* Set PE.07(D4), PE.08(D5), PE.09(D6), PE.10(D7), PE.11(D8), PE.12(D9), PE.13(D10),
PE.14(D11), PE.15(D12) as alternate function push pull */
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6 | GPIO_Pin_7 | GPIO_Pin_8 | GPIO_Pin_9 | GPIO_Pin_10 |
GPIO_Pin_11 | GPIO_Pin_12 | GPIO_Pin_13 | GPIO_Pin_14 |
GPIO_Pin_15;
GPIO_Init(GPIOE, &GPIO_InitStructure);
// GPIO_WriteBit(GPIOE, GPIO_Pin_6, Bit_SET);
/* Set PF.00(A0 (RS)) as alternate function push pull */
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0;
GPIO_Init(GPIOF, &GPIO_InitStructure);
/* Set PG.12(NE4 (LCD/CS)) as alternate function push pull - CE3(LCD /CS) */
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_12;
GPIO_Init(GPIOG, &GPIO_InitStructure);
}
/*******************************************************************************
* Function Name : LCD_FSMCConfig
* Description : Configures the Parallel interface (FSMC) for LCD(Parallel mode)
* Input : None
* Output : None
* Return : None
*******************************************************************************/
void LCD_FSMCConfig(void)
{
FSMC_NORSRAMInitTypeDef FSMC_NORSRAMInitStructure;
FSMC_NORSRAMTimingInitTypeDef p;
/*-- FSMC Configuration ------------------------------------------------------*/
/*----------------------- SRAM Bank 4 ----------------------------------------*/
/* FSMC_Bank1_NORSRAM4 configuration */
p.FSMC_AddressSetupTime = 0;
p.FSMC_AddressHoldTime = 0;
p.FSMC_DataSetupTime = 2;
p.FSMC_BusTurnAroundDuration = 0;
p.FSMC_CLKDivision = 0;
p.FSMC_DataLatency = 0;
p.FSMC_AccessMode = FSMC_AccessMode_A;
/* Color LCD configuration ------------------------------------
LCD configured as follow:
- Data/Address MUX = Disable
- Memory Type = SRAM
- Data Width = 16bit
- Write Operation = Enable
- Extended Mode = Enable
- Asynchronous Wait = Disable */
FSMC_NORSRAMInitStructure.FSMC_Bank = FSMC_Bank1_NORSRAM4;
FSMC_NORSRAMInitStructure.FSMC_DataAddressMux = FSMC_DataAddressMux_Disable;
FSMC_NORSRAMInitStructure.FSMC_MemoryType = FSMC_MemoryType_SRAM;
FSMC_NORSRAMInitStructure.FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_16b;
FSMC_NORSRAMInitStructure.FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable;
FSMC_NORSRAMInitStructure.FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low;
FSMC_NORSRAMInitStructure.FSMC_WrapMode = FSMC_WrapMode_Disable;
FSMC_NORSRAMInitStructure.FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState;
FSMC_NORSRAMInitStructure.FSMC_WriteOperation = FSMC_WriteOperation_Enable;
FSMC_NORSRAMInitStructure.FSMC_WaitSignal = FSMC_WaitSignal_Disable;
FSMC_NORSRAMInitStructure.FSMC_ExtendedMode = FSMC_ExtendedMode_Disable;
// FSMC_NORSRAMInitStructure.FSMC_AsyncWait = FSMC_AsyncWait_Disable;
FSMC_NORSRAMInitStructure.FSMC_WriteBurst = FSMC_WriteBurst_Disable;
FSMC_NORSRAMInitStructure.FSMC_ReadWriteTimingStruct = &p;
FSMC_NORSRAMInitStructure.FSMC_WriteTimingStruct = &p;
FSMC_NORSRAMInit(&FSMC_NORSRAMInitStructure);
/* BANK 4 (of NOR/SRAM Bank 1~4) is enabled */
FSMC_NORSRAMCmd(FSMC_Bank1_NORSRAM4, ENABLE);
}
void rt_hw_lcd_update(rtgui_rect_t *rect)
{
/* nothing */
}
rt_uint8_t * rt_hw_lcd_get_framebuffer(void)
{
return RT_NULL;
}
void rt_hw_lcd_set_pixel(rtgui_color_t *c, rt_base_t x, rt_base_t y)
{
unsigned short p;
/* get color pixel */
p = rtgui_color_to_565p(*c);
LCD_SetCursor(y, x);
/* Prepare to write GRAM */
LCD_WriteRAM_Prepare();
LCD_WriteRAM(p);
}
void rt_hw_lcd_get_pixel(rtgui_color_t *c, rt_base_t x, rt_base_t y)
{
rt_uint16_t hc;
LCD_SetCursor(y, x);
hc = LCD_ReadRAM();
*c = rtgui_color_from_565p(hc);
}
void rt_hw_lcd_draw_hline(rtgui_color_t *c, rt_base_t x1, rt_base_t x2, rt_base_t y)
{
rt_uint16_t hc;
hc = rtgui_color_to_565p(*c);
LCD_SetCursor(y, x1);
LCD_WriteRAM_Prepare(); /* Prepare to write GRAM */
while (x1 < x2)
{
LCD_WriteRAM(hc);
x1 ++;
}
}
void rt_hw_lcd_draw_vline(rtgui_color_t *c, rt_base_t x, rt_base_t y1, rt_base_t y2)
{
rt_uint16_t hc;
hc = rtgui_color_to_565p(*c);
while (y1 < y2)
{
LCD_SetCursor(y1, x); y1 ++;
/* Prepare to write GRAM */
LCD_WriteRAM_Prepare();
LCD_WriteRAM(hc);
}
}
void rt_hw_lcd_draw_raw_hline(rt_uint8_t *pixels, rt_base_t x1, rt_base_t x2, rt_base_t y)
{
rt_uint16_t *ptr;
/* get pixel */
ptr = (rt_uint16_t*) pixels;
LCD_SetCursor(y, x1);
LCD_WriteRAM_Prepare(); /* Prepare to write GRAM */
while (x1 < x2)
{
LCD_WriteRAM(*ptr);
x1 ++; ptr ++;
}
}
struct rtgui_graphic_driver _rtgui_lcd_driver =
{
"lcd",
2,
320,
240,
rt_hw_lcd_update,
rt_hw_lcd_get_framebuffer,
rt_hw_lcd_set_pixel,
rt_hw_lcd_get_pixel,
rt_hw_lcd_draw_hline,
rt_hw_lcd_draw_vline,
rt_hw_lcd_draw_raw_hline
};
#define Delay(v) \
{ \
volatile rt_uint32_t index; \
for (index = 0; index < v * 100; index ++) \
; \
}
void rt_hw_lcd_init()
{
/* Configure the LCD Control pins --------------------------------------------*/
LCD_CtrlLinesConfig();
/* Configure the FSMC Parallel interface -------------------------------------*/
LCD_FSMCConfig();
Delay(5); /* delay 50 ms */
// Gamma for CMO 3.2<EFBFBD><EFBFBD>
LCD_WriteReg(0x46,0x94);
LCD_WriteReg(0x47,0x41);
LCD_WriteReg(0x48,0x00);
LCD_WriteReg(0x49,0x33);
LCD_WriteReg(0x4a,0x23);
LCD_WriteReg(0x4b,0x45);
LCD_WriteReg(0x4c,0x44);
LCD_WriteReg(0x4d,0x77);
LCD_WriteReg(0x4e,0x12);
LCD_WriteReg(0x4f,0xcc);
LCD_WriteReg(0x50,0x46);
LCD_WriteReg(0x51,0x82);
//240x320 window setting
LCD_WriteReg(0x02,0x00);
LCD_WriteReg(0x03,0x00);
LCD_WriteReg(0x04,0x01);
LCD_WriteReg(0x05,0x3f);
LCD_WriteReg(0x06,0x00);
LCD_WriteReg(0x07,0x00);
LCD_WriteReg(0x08,0x00);
LCD_WriteReg(0x09,0xef);
// Display Setting
LCD_WriteReg(0x01,0x06);
LCD_WriteReg(0x16,0x68);
LCD_WriteReg(0x23,0x95);
LCD_WriteReg(0x24,0x95);
LCD_WriteReg(0x25,0xff);
LCD_WriteReg(0x27,0x02);
LCD_WriteReg(0x28,0x02);
LCD_WriteReg(0x29,0x02);
LCD_WriteReg(0x2a,0x02);
LCD_WriteReg(0x2c,0x02);
LCD_WriteReg(0x2d,0x02);
LCD_WriteReg(0x3a,0x01);///*******************
LCD_WriteReg(0x3b,0x01);
LCD_WriteReg(0x3c,0xf0);
LCD_WriteReg(0x3d,0x00);
Delay(2);
LCD_WriteReg(0x35,0x38);
LCD_WriteReg(0x36,0x78);
LCD_WriteReg(0x3e,0x38);
LCD_WriteReg(0x40,0x0f);
LCD_WriteReg(0x41,0xf0);
// Power Supply Setting
LCD_WriteReg(0x19,0x49);//********
LCD_WriteReg(0x93,0x0f);//*******
Delay(1);
LCD_WriteReg(0x20,0x30);
LCD_WriteReg(0x1d,0x07);
LCD_WriteReg(0x1e,0x00);
LCD_WriteReg(0x1f,0x07);
// VCOM Setting for CMO 3.2<EFBFBD><EFBFBD> Panel
LCD_WriteReg(0x44,0x4d);//4d***************4f
LCD_WriteReg(0x45,0x13);//0x0a);
Delay(1);
LCD_WriteReg(0x1c,0x04);
Delay(2);
LCD_WriteReg(0x43,0x80);
Delay(5);
LCD_WriteReg(0x1b,0x08);
Delay(4);
LCD_WriteReg(0x1b,0x10);
Delay(4);
// Display ON Setting
LCD_WriteReg(0x90,0x7f);
LCD_WriteReg(0x26,0x04);
Delay(4);
LCD_WriteReg(0x26,0x24);
LCD_WriteReg(0x26,0x2c);
Delay(4);
LCD_WriteReg(0x26,0x3c);
// Set internal VDDD voltage
LCD_WriteReg(0x57,0x02);
LCD_WriteReg(0x55,0x00);
LCD_WriteReg(0x57,0x00);
/* add lcd driver into graphic driver */
rtgui_list_init(&_rtgui_lcd_driver.list);
rtgui_graphic_driver_add(&_rtgui_lcd_driver);
}
#endif
void stm3210e_rtgui_init()
{
rtgui_rect_t rect;
rtgui_system_server_init();
/* register dock panel */
rect.x1 = 0;
rect.y1 = 0;
rect.x2 = 320;
rect.y2 = 25;
rtgui_panel_register("info", &rect);
/* register main panel */
rect.x1 = 0;
rect.y1 = 25;
rect.x2 = 320;
rect.y2 = 240;
rtgui_panel_register("main", &rect);
rtgui_panel_set_default_focused("main");
rt_hw_lcd_init();
info_init();
today_init();
}