libs/rt-thread
libs
/
rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
rt-thread/bsp/stm32f10x/sdcard.h

286 lines
15 KiB
C
Raw Normal View History

Re-normalizing the repo
2013-01-08 22:40:58 +08:00
/**
******************************************************************************
* @file SDIO/sdcard.h
* @author MCD Application Team
* @version V3.1.2
* @date 09/28/2009
* @brief This file contains all the functions prototypes for the SD Card
* driver firmware library.
******************************************************************************
* @copy
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2009 STMicroelectronics</center></h2>
*/
/** @addtogroup STM32F10x_StdPeriph_Examples
* @{
*/
/** @addtogroup SDIO_Example
* @{
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __SDCARD_H
#define __SDCARD_H
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x.h"
/* Exported types ------------------------------------------------------------*/
typedef enum
{
/* SDIO specific error defines */
SD_CMD_CRC_FAIL = (1), /* Command response received (but CRC check failed) */
SD_DATA_CRC_FAIL = (2), /* Data bock sent/received (CRC check Failed) */
SD_CMD_RSP_TIMEOUT = (3), /* Command response timeout */
SD_DATA_TIMEOUT = (4), /* Data time out */
SD_TX_UNDERRUN = (5), /* Transmit FIFO under-run */
SD_RX_OVERRUN = (6), /* Receive FIFO over-run */
SD_START_BIT_ERR = (7), /* Start bit not detected on all data signals in widE bus mode */
SD_CMD_OUT_OF_RANGE = (8), /* CMD's argument was out of range.*/
SD_ADDR_MISALIGNED = (9), /* Misaligned address */
SD_BLOCK_LEN_ERR = (10), /* Transferred block length is not allowed for the card or the number of transferred bytes does not match the block length */
SD_ERASE_SEQ_ERR = (11), /* An error in the sequence of erase command occurs.*/
SD_BAD_ERASE_PARAM = (12), /* An Invalid selection for erase groups */
SD_WRITE_PROT_VIOLATION = (13), /* Attempt to program a write protect block */
SD_LOCK_UNLOCK_FAILED = (14), /* Sequence or password error has been detected in unlock command or if there was an attempt to access a locked card */
SD_COM_CRC_FAILED = (15), /* CRC check of the previous command failed */
SD_ILLEGAL_CMD = (16), /* Command is not legal for the card state */
SD_CARD_ECC_FAILED = (17), /* Card internal ECC was applied but failed to correct the data */
SD_CC_ERROR = (18), /* Internal card controller error */
SD_GENERAL_UNKNOWN_ERROR = (19), /* General or Unknown error */
SD_STREAM_READ_UNDERRUN = (20), /* The card could not sustain data transfer in stream read operation. */
SD_STREAM_WRITE_OVERRUN = (21), /* The card could not sustain data programming in stream mode */
SD_CID_CSD_OVERWRITE = (22), /* CID/CSD overwrite error */
SD_WP_ERASE_SKIP = (23), /* only partial address space was erased */
SD_CARD_ECC_DISABLED = (24), /* Command has been executed without using internal ECC */
SD_ERASE_RESET = (25), /* Erase sequence was cleared before executing because an out of erase sequence command was received */
SD_AKE_SEQ_ERROR = (26), /* Error in sequence of authentication. */
SD_INVALID_VOLTRANGE = (27),
SD_ADDR_OUT_OF_RANGE = (28),
SD_SWITCH_ERROR = (29),
SD_SDIO_DISABLED = (30),
SD_SDIO_FUNCTION_BUSY = (31),
SD_SDIO_FUNCTION_FAILED = (32),
SD_SDIO_UNKNOWN_FUNCTION = (33),
/* Standard error defines */
SD_INTERNAL_ERROR,
SD_NOT_CONFIGURED,
SD_REQUEST_PENDING,
SD_REQUEST_NOT_APPLICABLE,
SD_INVALID_PARAMETER,
SD_UNSUPPORTED_FEATURE,
SD_UNSUPPORTED_HW,
SD_ERROR,
SD_OK,
} SD_Error;
/* SDIO Commands Index */
#define SDIO_GO_IDLE_STATE ((uint8_t)0)
#define SDIO_SEND_OP_COND ((uint8_t)1)
#define SDIO_ALL_SEND_CID ((uint8_t)2)
#define SDIO_SET_REL_ADDR ((uint8_t)3) /* SDIO_SEND_REL_ADDR for SD Card */
#define SDIO_SET_DSR ((uint8_t)4)
#define SDIO_SDIO_SEN_OP_COND ((uint8_t)5)
#define SDIO_HS_SWITCH ((uint8_t)6)
#define SDIO_SEL_DESEL_CARD ((uint8_t)7)
#define SDIO_HS_SEND_EXT_CSD ((uint8_t)8)
#define SDIO_SEND_CSD ((uint8_t)9)
#define SDIO_SEND_CID ((uint8_t)10)
#define SDIO_READ_DAT_UNTIL_STOP ((uint8_t)11) /* SD Card doesn't support it */
#define SDIO_STOP_TRANSMISSION ((uint8_t)12)
#define SDIO_SEND_STATUS ((uint8_t)13)
#define SDIO_HS_BUSTEST_READ ((uint8_t)14)
#define SDIO_GO_INACTIVE_STATE ((uint8_t)15)
#define SDIO_SET_BLOCKLEN ((uint8_t)16)
#define SDIO_READ_SINGLE_BLOCK ((uint8_t)17)
#define SDIO_READ_MULT_BLOCK ((uint8_t)18)
#define SDIO_HS_BUSTEST_WRITE ((uint8_t)19)
#define SDIO_WRITE_DAT_UNTIL_STOP ((uint8_t)20) /* SD Card doesn't support it */
#define SDIO_SET_BLOCK_COUNT ((uint8_t)23) /* SD Card doesn't support it */
#define SDIO_WRITE_SINGLE_BLOCK ((uint8_t)24)
#define SDIO_WRITE_MULT_BLOCK ((uint8_t)25)
#define SDIO_PROG_CID ((uint8_t)26) /* reserved for manufacturers */
#define SDIO_PROG_CSD ((uint8_t)27)
#define SDIO_SET_WRITE_PROT ((uint8_t)28)
#define SDIO_CLR_WRITE_PROT ((uint8_t)29)
#define SDIO_SEND_WRITE_PROT ((uint8_t)30)
#define SDIO_SD_ERASE_GRP_START ((uint8_t)32) /* To set the address of the first write
block to be erased. (For SD card only) */
#define SDIO_SD_ERASE_GRP_END ((uint8_t)33) /* To set the address of the last write block of the
continuous range to be erased. (For SD card only) */
#define SDIO_ERASE_GRP_START ((uint8_t)35) /* To set the address of the first write block to be erased.
(For MMC card only spec 3.31) */
#define SDIO_ERASE_GRP_END ((uint8_t)36) /* To set the address of the last write block of the
continuous range to be erased. (For MMC card only spec 3.31) */
#define SDIO_ERASE ((uint8_t)38)
#define SDIO_FAST_IO ((uint8_t)39) /* SD Card doesn't support it */
#define SDIO_GO_IRQ_STATE ((uint8_t)40) /* SD Card doesn't support it */
#define SDIO_LOCK_UNLOCK ((uint8_t)42)
#define SDIO_APP_CMD ((uint8_t)55)
#define SDIO_GEN_CMD ((uint8_t)56)
#define SDIO_NO_CMD ((uint8_t)64)
/* Following commands are SD Card Specific commands.
SDIO_APP_CMD should be sent before sending these
commands. */
#define SDIO_APP_SD_SET_BUSWIDTH ((uint8_t)6) /* For SD Card only */
#define SDIO_SD_APP_STAUS ((uint8_t)13) /* For SD Card only */
#define SDIO_SD_APP_SEND_NUM_WRITE_BLOCKS ((uint8_t)22) /* For SD Card only */
#define SDIO_SD_APP_OP_COND ((uint8_t)41) /* For SD Card only */
#define SDIO_SD_APP_SET_CLR_CARD_DETECT ((uint8_t)42) /* For SD Card only */
#define SDIO_SD_APP_SEND_SCR ((uint8_t)51) /* For SD Card only */
#define SDIO_SDIO_RW_DIRECT ((uint8_t)52) /* For SD I/O Card only */
#define SDIO_SDIO_RW_EXTENDED ((uint8_t)53) /* For SD I/O Card only */
/* Following commands are SD Card Specific security commands.
SDIO_APP_CMD should be sent before sending these commands. */
#define SDIO_SD_APP_GET_MKB ((uint8_t)43) /* For SD Card only */
#define SDIO_SD_APP_GET_MID ((uint8_t)44) /* For SD Card only */
#define SDIO_SD_APP_SET_CER_RN1 ((uint8_t)45) /* For SD Card only */
#define SDIO_SD_APP_GET_CER_RN2 ((uint8_t)46) /* For SD Card only */
#define SDIO_SD_APP_SET_CER_RES2 ((uint8_t)47) /* For SD Card only */
#define SDIO_SD_APP_GET_CER_RES1 ((uint8_t)48) /* For SD Card only */
#define SDIO_SD_APP_SECURE_READ_MULTIPLE_BLOCK ((uint8_t)18) /* For SD Card only */
#define SDIO_SD_APP_SECURE_WRITE_MULTIPLE_BLOCK ((uint8_t)25) /* For SD Card only */
#define SDIO_SD_APP_SECURE_ERASE ((uint8_t)38) /* For SD Card only */
#define SDIO_SD_APP_CHANGE_SECURE_AREA ((uint8_t)49) /* For SD Card only */
#define SDIO_SD_APP_SECURE_WRITE_MKB ((uint8_t)48) /* For SD Card only */
typedef enum
{
SD_NO_TRANSFER = 0,
SD_TRANSFER_IN_PROGRESS
} SDTransferState;
typedef struct
{
uint16_t TransferredBytes;
SD_Error TransferError;
uint8_t padding;
} SDLastTransferInfo;
typedef struct /* Card Specific Data */
{
__IO uint8_t CSDStruct; /* CSD structure */
__IO uint8_t SysSpecVersion; /* System specification version */
__IO uint8_t Reserved1; /* Reserved */
__IO uint8_t TAAC; /* Data read access-time 1 */
__IO uint8_t NSAC; /* Data read access-time 2 in CLK cycles */
__IO uint8_t MaxBusClkFrec; /* Max. bus clock frequency */
__IO uint16_t CardComdClasses; /* Card command classes */
__IO uint8_t RdBlockLen; /* Max. read data block length */
__IO uint8_t PartBlockRead; /* Partial blocks for read allowed */
__IO uint8_t WrBlockMisalign; /* Write block misalignment */
__IO uint8_t RdBlockMisalign; /* Read block misalignment */
__IO uint8_t DSRImpl; /* DSR implemented */
__IO uint8_t Reserved2; /* Reserved */
__IO uint32_t DeviceSize; /* Device Size */
__IO uint8_t MaxRdCurrentVDDMin; /* Max. read current @ VDD min */
__IO uint8_t MaxRdCurrentVDDMax; /* Max. read current @ VDD max */
__IO uint8_t MaxWrCurrentVDDMin; /* Max. write current @ VDD min */
__IO uint8_t MaxWrCurrentVDDMax; /* Max. write current @ VDD max */
__IO uint8_t DeviceSizeMul; /* Device size multiplier */
__IO uint8_t EraseGrSize; /* Erase group size */
__IO uint8_t EraseGrMul; /* Erase group size multiplier */
__IO uint8_t WrProtectGrSize; /* Write protect group size */
__IO uint8_t WrProtectGrEnable; /* Write protect group enable */
__IO uint8_t ManDeflECC; /* Manufacturer default ECC */
__IO uint8_t WrSpeedFact; /* Write speed factor */
__IO uint8_t MaxWrBlockLen; /* Max. write data block length */
__IO uint8_t WriteBlockPaPartial; /* Partial blocks for write allowed */
__IO uint8_t Reserved3; /* Reserded */
__IO uint8_t ContentProtectAppli; /* Content protection application */
__IO uint8_t FileFormatGrouop; /* File format group */
__IO uint8_t CopyFlag; /* Copy flag (OTP) */
__IO uint8_t PermWrProtect; /* Permanent write protection */
__IO uint8_t TempWrProtect; /* Temporary write protection */
__IO uint8_t FileFormat; /* File Format */
__IO uint8_t ECC; /* ECC code */
__IO uint8_t CSD_CRC; /* CSD CRC */
__IO uint8_t Reserved4; /* always 1*/
} SD_CSD;
typedef struct /*Card Identification Data*/
{
__IO uint8_t ManufacturerID; /* ManufacturerID */
__IO uint16_t OEM_AppliID; /* OEM/Application ID */
__IO uint32_t ProdName1; /* Product Name part1 */
__IO uint8_t ProdName2; /* Product Name part2*/
__IO uint8_t ProdRev; /* Product Revision */
__IO uint32_t ProdSN; /* Product Serial Number */
__IO uint8_t Reserved1; /* Reserved1 */
__IO uint16_t ManufactDate; /* Manufacturing Date */
__IO uint8_t CID_CRC; /* CID CRC */
__IO uint8_t Reserved2; /* always 1 */
} SD_CID;
typedef struct
{
SD_CSD SD_csd;
SD_CID SD_cid;
uint32_t CardCapacity; /* Card Capacity */
uint32_t CardBlockSize; /* Card Block Size */
uint16_t RCA;
uint8_t CardType;
} SD_CardInfo;
/* Exported constants --------------------------------------------------------*/
#define SD_DMA_MODE ((uint32_t)0x00000000)
#define SD_INTERRUPT_MODE ((uint32_t)0x00000001)
#define SD_POLLING_MODE ((uint32_t)0x00000002)
/* Supported Memory Cards */
#define SDIO_STD_CAPACITY_SD_CARD_V1_1 ((uint32_t)0x0)
#define SDIO_STD_CAPACITY_SD_CARD_V2_0 ((uint32_t)0x1)
#define SDIO_HIGH_CAPACITY_SD_CARD ((uint32_t)0x2)
#define SDIO_MULTIMEDIA_CARD ((uint32_t)0x3)
#define SDIO_SECURE_DIGITAL_IO_CARD ((uint32_t)0x4)
#define SDIO_HIGH_SPEED_MULTIMEDIA_CARD ((uint32_t)0x5)
#define SDIO_SECURE_DIGITAL_IO_COMBO_CARD ((uint32_t)0x6)
#define SDIO_HIGH_CAPACITY_MMC_CARD ((uint32_t)0x7)
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
SD_Error SD_Init(void);
SD_Error SD_PowerON(void);
SD_Error SD_PowerOFF(void);
SD_Error SD_InitializeCards(void);
SD_Error SD_GetCardInfo(SD_CardInfo *cardinfo);
SD_Error SD_EnableWideBusOperation(uint32_t WideMode);
SD_Error SD_SetDeviceMode(uint32_t Mode);
SD_Error SD_SelectDeselect(uint32_t addr);
SD_Error SD_ReadBlock(uint32_t addr, uint32_t *readbuff, uint16_t BlockSize);
SD_Error SD_ReadMultiBlocks(uint32_t addr, uint32_t *readbuff, uint16_t BlockSize, uint32_t NumberOfBlocks);
SD_Error SD_WriteBlock(uint32_t addr, uint32_t *writebuff, uint16_t BlockSize);
SD_Error SD_WriteMultiBlocks(uint32_t addr, uint32_t *writebuff, uint16_t BlockSize, uint32_t NumberOfBlocks);
SDTransferState SD_GetTransferState(void);
SD_Error SD_StopTransfer(void);
SD_Error SD_Erase(uint32_t startaddr, uint32_t endaddr);
SD_Error SD_SendStatus(uint32_t *pcardstatus);
SD_Error SD_SendSDStatus(uint32_t *psdstatus);
SD_Error SD_ProcessIRQSrc(void);
#endif /* __SDCARD_H */
/**
* @}
*/
/**
* @}
*/
/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/