rt-thread/bsp/lpc54114-lite/Libraries/devices/LPC54114/drivers/fsl_crc.h

208 lines
6.4 KiB
C
Raw Normal View History

2018-12-05 11:44:53 +08:00
/*
* The Clear BSD License
* Copyright (c) 2015-2016, Freescale Semiconductor, Inc.
* Copyright 2016-2017 NXP
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted (subject to the limitations in the disclaimer below) provided
* that the following conditions are met:
*
* o Redistributions of source code must retain the above copyright notice, this list
* of conditions and the following disclaimer.
*
* o Redistributions in binary form must reproduce the above copyright notice, this
* list of conditions and the following disclaimer in the documentation and/or
* other materials provided with the distribution.
*
* o Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED BY THIS LICENSE.
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _FSL_CRC_H_
#define _FSL_CRC_H_
#include "fsl_common.h"
/*!
* @addtogroup crc
* @{
*/
/*! @file */
/*******************************************************************************
* Definitions
******************************************************************************/
/*! @name Driver version */
/*@{*/
/*! @brief CRC driver version. Version 2.0.1.
*
* Current version: 2.0.1
*
* Change log:
* - Version 2.0.0
* - initial version
* - Version 2.0.1
* - add explicit type cast when writing to WR_DATA
*/
#define FSL_CRC_DRIVER_VERSION (MAKE_VERSION(2, 0, 1))
/*@}*/
#ifndef CRC_DRIVER_CUSTOM_DEFAULTS
/*! @brief Default configuration structure filled by CRC_GetDefaultConfig(). Uses CRC-16/CCITT-FALSE as default. */
#define CRC_DRIVER_USE_CRC16_CCITT_FALSE_AS_DEFAULT 1
#endif
/*! @brief CRC polynomials to use. */
typedef enum _crc_polynomial
{
kCRC_Polynomial_CRC_CCITT = 0U, /*!< x^16+x^12+x^5+1 */
kCRC_Polynomial_CRC_16 = 1U, /*!< x^16+x^15+x^2+1 */
kCRC_Polynomial_CRC_32 = 2U /*!< x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x+1 */
} crc_polynomial_t;
/*!
* @brief CRC protocol configuration.
*
* This structure holds the configuration for the CRC protocol.
*
*/
typedef struct _crc_config
{
crc_polynomial_t polynomial; /*!< CRC polynomial. */
bool reverseIn; /*!< Reverse bits on input. */
bool complementIn; /*!< Perform 1's complement on input. */
bool reverseOut; /*!< Reverse bits on output. */
bool complementOut; /*!< Perform 1's complement on output. */
uint32_t seed; /*!< Starting checksum value. */
} crc_config_t;
/*******************************************************************************
* API
******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif
/*!
* @brief Enables and configures the CRC peripheral module.
*
* This functions enables the CRC peripheral clock in the LPC SYSCON block.
* It also configures the CRC engine and starts checksum computation by writing the seed.
*
* @param base CRC peripheral address.
* @param config CRC module configuration structure.
*/
void CRC_Init(CRC_Type *base, const crc_config_t *config);
/*!
* @brief Disables the CRC peripheral module.
*
* This functions disables the CRC peripheral clock in the LPC SYSCON block.
*
* @param base CRC peripheral address.
*/
static inline void CRC_Deinit(CRC_Type *base)
{
#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL)
/* disable clock to CRC */
CLOCK_DisableClock(kCLOCK_Crc);
#endif /* FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL */
}
/*!
* @brief resets CRC peripheral module.
*
* @param base CRC peripheral address.
*/
void CRC_Reset(CRC_Type *base);
/*!
* @brief Loads default values to CRC protocol configuration structure.
*
* Loads default values to CRC protocol configuration structure. The default values are:
* @code
* config->polynomial = kCRC_Polynomial_CRC_CCITT;
* config->reverseIn = false;
* config->complementIn = false;
* config->reverseOut = false;
* config->complementOut = false;
* config->seed = 0xFFFFU;
* @endcode
*
* @param config CRC protocol configuration structure
*/
void CRC_GetDefaultConfig(crc_config_t *config);
/*!
* @brief Loads actual values configured in CRC peripheral to CRC protocol configuration structure.
*
* The values, including seed, can be used to resume CRC calculation later.
* @param base CRC peripheral address.
* @param config CRC protocol configuration structure
*/
void CRC_GetConfig(CRC_Type *base, crc_config_t *config);
/*!
* @brief Writes data to the CRC module.
*
* Writes input data buffer bytes to CRC data register.
*
* @param base CRC peripheral address.
* @param data Input data stream, MSByte in data[0].
* @param dataSize Size of the input data buffer in bytes.
*/
void CRC_WriteData(CRC_Type *base, const uint8_t *data, size_t dataSize);
/*!
* @brief Reads 32-bit checksum from the CRC module.
*
* Reads CRC data register.
*
* @param base CRC peripheral address.
* @return final 32-bit checksum, after configured bit reverse and complement operations.
*/
static inline uint32_t CRC_Get32bitResult(CRC_Type *base)
{
return base->SUM;
}
/*!
* @brief Reads 16-bit checksum from the CRC module.
*
* Reads CRC data register.
*
* @param base CRC peripheral address.
* @return final 16-bit checksum, after configured bit reverse and complement operations.
*/
static inline uint16_t CRC_Get16bitResult(CRC_Type *base)
{
return (uint16_t)base->SUM;
}
#if defined(__cplusplus)
}
#endif
/*!
*@}
*/
#endif /* _FSL_CRC_H_ */