491 lines
13 KiB
C
491 lines
13 KiB
C
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
// luminaryif.c - Ethernet Interface File for lwIP TCP/IP Stack
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
|
||
|
|
#include <inc/hw_memmap.h>
|
||
|
|
#include <inc/hw_types.h>
|
||
|
|
#include <inc/hw_ints.h>
|
||
|
|
#include <inc/hw_ethernet.h>
|
||
|
|
#include <driverlib/ethernet.h>
|
||
|
|
#include <driverlib/interrupt.h>
|
||
|
|
#include <driverlib/sysctl.h>
|
||
|
|
#include <driverlib/gpio.h>
|
||
|
|
#include <driverlib/flash.h>
|
||
|
|
|
||
|
|
#include <netif/ethernetif.h>
|
||
|
|
#include "lwipopts.h"
|
||
|
|
#include "luminaryif.h"
|
||
|
|
|
||
|
|
#define MAX_ADDR_LEN 6
|
||
|
|
|
||
|
|
struct net_device
|
||
|
|
{
|
||
|
|
/* inherit from ethernet device */
|
||
|
|
struct eth_device parent;
|
||
|
|
|
||
|
|
/* interface address info. */
|
||
|
|
rt_uint8_t dev_addr[MAX_ADDR_LEN]; /* hw address */
|
||
|
|
};
|
||
|
|
|
||
|
|
static struct net_device luminaryif_dev_entry;
|
||
|
|
static struct net_device *luminaryif_dev =&luminaryif_dev_entry;
|
||
|
|
static struct rt_semaphore tx_sem;
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
// Sanity Check: This module will NOT work if the following defines
|
||
|
|
// are incorrect.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
#if (PBUF_LINK_HLEN != 16)
|
||
|
|
#error "Incorrect PBUF_LINK_HLEN specified!"
|
||
|
|
#endif
|
||
|
|
#if (ETH_PAD_SIZE != 2)
|
||
|
|
#error "Incorrect ETH_PAD_SIZE specified!"
|
||
|
|
#endif
|
||
|
|
#if (PBUF_POOL_BUFSIZE % 4)
|
||
|
|
#error "PBUF_POOL_BUFSIZE must be modulo 4!"
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/* RT-Thread Device Interface */
|
||
|
|
|
||
|
|
/* initialize the interface */
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
// Low-Level initialization function for the Ethernet Controller.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
rt_err_t luminaryif_init(rt_device_t dev)
|
||
|
|
{
|
||
|
|
unsigned long ulTemp;
|
||
|
|
|
||
|
|
//
|
||
|
|
// Disable all Ethernet Interrupts.
|
||
|
|
//
|
||
|
|
EthernetIntDisable(ETH_BASE, (ETH_INT_PHY | ETH_INT_MDIO | ETH_INT_RXER |
|
||
|
|
ETH_INT_RXOF | ETH_INT_TX | ETH_INT_TXER |
|
||
|
|
ETH_INT_RX));
|
||
|
|
ulTemp = EthernetIntStatus(ETH_BASE, false);
|
||
|
|
EthernetIntClear(ETH_BASE, ulTemp);
|
||
|
|
|
||
|
|
//
|
||
|
|
// Initialize the Ethernet Controller.
|
||
|
|
//
|
||
|
|
EthernetInitExpClk(ETH_BASE, SysCtlClockGet());
|
||
|
|
|
||
|
|
//
|
||
|
|
// Configure the Ethernet Controller for normal operation.
|
||
|
|
// - Enable TX Duplex Mode
|
||
|
|
// - Enable TX Padding
|
||
|
|
// - Enable TX CRC Generation
|
||
|
|
//
|
||
|
|
EthernetConfigSet(ETH_BASE, (ETH_CFG_TX_DPLXEN |
|
||
|
|
ETH_CFG_TX_CRCEN | ETH_CFG_TX_PADEN));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Enable the Ethernet Controller transmitter and receiver.
|
||
|
|
//
|
||
|
|
EthernetEnable(ETH_BASE);
|
||
|
|
|
||
|
|
//
|
||
|
|
// Enable the Ethernet Interrupt handler.
|
||
|
|
//
|
||
|
|
IntEnable(INT_ETH);
|
||
|
|
|
||
|
|
//
|
||
|
|
// Enable Ethernet TX and RX Packet Interrupts.
|
||
|
|
//
|
||
|
|
EthernetIntEnable(ETH_BASE, ETH_INT_RX | ETH_INT_TX);
|
||
|
|
|
||
|
|
return RT_EOK;
|
||
|
|
}
|
||
|
|
|
||
|
|
void luminaryif_isr(void)
|
||
|
|
{
|
||
|
|
unsigned long ulTemp;
|
||
|
|
|
||
|
|
//
|
||
|
|
// Read and Clear the interrupt.
|
||
|
|
//
|
||
|
|
ulTemp = EthernetIntStatus(ETH_BASE, false);
|
||
|
|
EthernetIntClear(ETH_BASE, ulTemp);
|
||
|
|
|
||
|
|
//
|
||
|
|
// Check to see if an RX Interrupt has occured.
|
||
|
|
//
|
||
|
|
if(ulTemp & ETH_INT_RX)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Indicate that a packet has been received.
|
||
|
|
//
|
||
|
|
rt_err_t result;
|
||
|
|
|
||
|
|
/* a frame has been received */
|
||
|
|
result = eth_device_ready((struct eth_device*)&(luminaryif_dev->parent));
|
||
|
|
|
||
|
|
if(result != RT_EOK) rt_set_errno(-RT_ERROR);
|
||
|
|
|
||
|
|
//
|
||
|
|
// Disable Ethernet RX Interrupt.
|
||
|
|
//
|
||
|
|
EthernetIntDisable(ETH_BASE, ETH_INT_RX);
|
||
|
|
}
|
||
|
|
if(ulTemp & ETH_INT_TX)
|
||
|
|
{
|
||
|
|
/* A frame has been transmitted. */
|
||
|
|
rt_sem_release(&tx_sem);
|
||
|
|
}
|
||
|
|
|
||
|
|
}
|
||
|
|
|
||
|
|
/* control the interface */
|
||
|
|
rt_err_t luminaryif_control(rt_device_t dev, rt_uint8_t cmd, void *args)
|
||
|
|
{
|
||
|
|
switch(cmd)
|
||
|
|
{
|
||
|
|
case NIOCTL_GADDR:
|
||
|
|
/* get mac address */
|
||
|
|
if(args) rt_memcpy(args, luminaryif_dev_entry.dev_addr, 6);
|
||
|
|
else return -RT_ERROR;
|
||
|
|
break;
|
||
|
|
|
||
|
|
default :
|
||
|
|
break;
|
||
|
|
}
|
||
|
|
|
||
|
|
return RT_EOK;
|
||
|
|
}
|
||
|
|
|
||
|
|
/* Open the ethernet interface */
|
||
|
|
rt_err_t luminaryif_open(rt_device_t dev, rt_uint16_t oflag)
|
||
|
|
{
|
||
|
|
return RT_EOK;
|
||
|
|
}
|
||
|
|
|
||
|
|
/* Close the interface */
|
||
|
|
rt_err_t luminaryif_close(rt_device_t dev)
|
||
|
|
{
|
||
|
|
return RT_EOK;
|
||
|
|
}
|
||
|
|
|
||
|
|
/* Read */
|
||
|
|
rt_size_t luminaryif_read(rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size)
|
||
|
|
{
|
||
|
|
rt_set_errno(-RT_ENOSYS);
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
/* Write */
|
||
|
|
rt_size_t luminaryif_write(rt_device_t dev, rt_off_t pos, const void* buffer, rt_size_t size)
|
||
|
|
{
|
||
|
|
rt_set_errno(-RT_ENOSYS);
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
//****************************************************************************
|
||
|
|
//
|
||
|
|
// Low-Level transmit routine. Should do the actual transmission of the
|
||
|
|
// packet. The packet is contained in the pbuf that is passed to the function.
|
||
|
|
// This pbuf might be chained.
|
||
|
|
//
|
||
|
|
//****************************************************************************
|
||
|
|
rt_err_t luminaryif_tx(rt_device_t dev, struct pbuf *p)
|
||
|
|
{
|
||
|
|
int iBuf;
|
||
|
|
unsigned char *pucBuf;
|
||
|
|
unsigned long *pulBuf;
|
||
|
|
struct pbuf *q;
|
||
|
|
int iGather;
|
||
|
|
unsigned long ulGather;
|
||
|
|
unsigned char *pucGather;
|
||
|
|
unsigned long ulTemp;
|
||
|
|
|
||
|
|
/* lock tx operation */
|
||
|
|
rt_sem_take(&tx_sem, RT_WAITING_FOREVER);
|
||
|
|
|
||
|
|
//
|
||
|
|
// Wait for space available in the TX FIFO.
|
||
|
|
//
|
||
|
|
while(!EthernetSpaceAvail(ETH_BASE))
|
||
|
|
{
|
||
|
|
}
|
||
|
|
|
||
|
|
//
|
||
|
|
// Fill in the first two bytes of the payload data (configured as padding
|
||
|
|
// with ETH_PAD_SIZE = 2) with the total length of the payload data
|
||
|
|
// (minus the Ethernet MAC layer header).
|
||
|
|
//
|
||
|
|
*((unsigned short *)(p->payload)) = p->tot_len - 16;
|
||
|
|
|
||
|
|
//
|
||
|
|
// Initialize the gather register.
|
||
|
|
//
|
||
|
|
iGather = 0;
|
||
|
|
pucGather = (unsigned char *)&ulGather;
|
||
|
|
ulGather = 0;
|
||
|
|
|
||
|
|
//
|
||
|
|
// Copy data from the pbuf(s) into the TX Fifo.
|
||
|
|
//
|
||
|
|
for(q = p; q != NULL; q = q->next)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Intialize a char pointer and index to the pbuf payload data.
|
||
|
|
//
|
||
|
|
pucBuf = (unsigned char *)q->payload;
|
||
|
|
iBuf = 0;
|
||
|
|
|
||
|
|
//
|
||
|
|
// If the gather buffer has leftover data from a previous pbuf
|
||
|
|
// in the chain, fill it up and write it to the Tx FIFO.
|
||
|
|
//
|
||
|
|
while((iBuf < q->len) && (iGather != 0))
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Copy a byte from the pbuf into the gather buffer.
|
||
|
|
//
|
||
|
|
pucGather[iGather] = pucBuf[iBuf++];
|
||
|
|
|
||
|
|
//
|
||
|
|
// Increment the gather buffer index modulo 4.
|
||
|
|
//
|
||
|
|
iGather = ((iGather + 1) % 4);
|
||
|
|
}
|
||
|
|
|
||
|
|
//
|
||
|
|
// If the gather index is 0 and the pbuf index is non-zero,
|
||
|
|
// we have a gather buffer to write into the Tx FIFO.
|
||
|
|
//
|
||
|
|
if((iGather == 0) && (iBuf != 0))
|
||
|
|
{
|
||
|
|
HWREG(ETH_BASE + MAC_O_DATA) = ulGather;
|
||
|
|
ulGather = 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
//
|
||
|
|
// Copy words of pbuf data into the Tx FIFO, but don't go past
|
||
|
|
// the end of the pbuf.
|
||
|
|
//
|
||
|
|
if((iBuf % 4) != 0)
|
||
|
|
{
|
||
|
|
while((iBuf + 4) <= q->len)
|
||
|
|
{
|
||
|
|
ulTemp = (pucBuf[iBuf++] << 0);
|
||
|
|
ulTemp |= (pucBuf[iBuf++] << 8);
|
||
|
|
ulTemp |= (pucBuf[iBuf++] << 16);
|
||
|
|
ulTemp |= (pucBuf[iBuf++] << 24);
|
||
|
|
HWREG(ETH_BASE + MAC_O_DATA) = ulTemp;
|
||
|
|
}
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Initialze a long pointer into the pbuf for 32-bit access.
|
||
|
|
//
|
||
|
|
pulBuf = (unsigned long *)&pucBuf[iBuf];
|
||
|
|
|
||
|
|
while((iBuf + 4) <= q->len)
|
||
|
|
{
|
||
|
|
HWREG(ETH_BASE + MAC_O_DATA) = *pulBuf++;
|
||
|
|
iBuf += 4;
|
||
|
|
}
|
||
|
|
}
|
||
|
|
//
|
||
|
|
// Check if leftover data in the pbuf and save it in the gather
|
||
|
|
// buffer for the next time.
|
||
|
|
//
|
||
|
|
while(iBuf < q->len)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Copy a byte from the pbuf into the gather buffer.
|
||
|
|
//
|
||
|
|
pucGather[iGather] = pucBuf[iBuf++];
|
||
|
|
|
||
|
|
//
|
||
|
|
// Increment the gather buffer index modulo 4.
|
||
|
|
//
|
||
|
|
iGather = ((iGather + 1) % 4);
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
//
|
||
|
|
// Send any leftover data to the FIFO.
|
||
|
|
//
|
||
|
|
HWREG(ETH_BASE + MAC_O_DATA) = ulGather;
|
||
|
|
|
||
|
|
//
|
||
|
|
// Wakeup the transmitter.
|
||
|
|
//
|
||
|
|
HWREG(ETH_BASE + MAC_O_TR) = MAC_TR_NEWTX;
|
||
|
|
|
||
|
|
#if LINK_STATS
|
||
|
|
lwip_stats.link.xmit++;
|
||
|
|
#endif
|
||
|
|
|
||
|
|
return(ERR_OK);
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
// Low-Level receive routine. Should allocate a pbuf and transfer the bytes
|
||
|
|
// of the incoming packet from the interface into the pbuf.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
struct pbuf * luminaryif_rx(rt_device_t dev)
|
||
|
|
{
|
||
|
|
struct pbuf *p, *q;
|
||
|
|
u16_t len;
|
||
|
|
unsigned long ulTemp;
|
||
|
|
int i;
|
||
|
|
unsigned long *ptr;
|
||
|
|
|
||
|
|
if(!EthernetPacketAvail(ETH_BASE))
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Enable Ethernet RX Interrupt.
|
||
|
|
//
|
||
|
|
EthernetIntEnable(ETH_BASE, ETH_INT_RX);
|
||
|
|
|
||
|
|
return(NULL);
|
||
|
|
}
|
||
|
|
|
||
|
|
//
|
||
|
|
// Obtain the size of the packet and put it into the "len" variable.
|
||
|
|
// Note: The length returned in the FIFO length position includes the
|
||
|
|
// two bytes for the length + the 4 bytes for the FCS.
|
||
|
|
//
|
||
|
|
ulTemp = HWREG(ETH_BASE + MAC_O_DATA);
|
||
|
|
len = ulTemp & 0xFFFF;
|
||
|
|
|
||
|
|
//
|
||
|
|
// We allocate a pbuf chain of pbufs from the pool.
|
||
|
|
//
|
||
|
|
p = pbuf_alloc(PBUF_LINK, len, PBUF_RAM);
|
||
|
|
|
||
|
|
if(p != NULL)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Place the first word into the first pbuf location.
|
||
|
|
//
|
||
|
|
*(unsigned long *)p->payload = ulTemp;
|
||
|
|
p->payload = (char *)(p->payload) + 4;
|
||
|
|
p->len -= 4;
|
||
|
|
|
||
|
|
//
|
||
|
|
// Process all but the last buffer in the pbuf chain.
|
||
|
|
//
|
||
|
|
q = p;
|
||
|
|
while(q != NULL)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Setup a byte pointer into the payload section of the pbuf.
|
||
|
|
//
|
||
|
|
ptr = q->payload;
|
||
|
|
|
||
|
|
//
|
||
|
|
// Read data from FIFO into the current pbuf
|
||
|
|
// (assume pbuf length is modulo 4)
|
||
|
|
//
|
||
|
|
for(i = 0; i < q->len; i += 4)
|
||
|
|
{
|
||
|
|
*ptr++ = HWREG(ETH_BASE + MAC_O_DATA);
|
||
|
|
}
|
||
|
|
|
||
|
|
//
|
||
|
|
// Link in the next pbuf in the chain.
|
||
|
|
//
|
||
|
|
q = q->next;
|
||
|
|
}
|
||
|
|
|
||
|
|
//
|
||
|
|
// Restore the first pbuf parameters to their original values.
|
||
|
|
//
|
||
|
|
p->payload = (char *)(p->payload) - 4;
|
||
|
|
p->len += 4;
|
||
|
|
|
||
|
|
#if LINK_STATS
|
||
|
|
lwip_stats.link.recv++;
|
||
|
|
#endif
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Just read all of the remaining data from the FIFO and dump it.
|
||
|
|
//
|
||
|
|
for(i = 4; i < len; i+=4)
|
||
|
|
{
|
||
|
|
ulTemp = HWREG(ETH_BASE + MAC_O_DATA);
|
||
|
|
}
|
||
|
|
|
||
|
|
#if LINK_STATS
|
||
|
|
lwip_stats.link.memerr++;
|
||
|
|
lwip_stats.link.drop++;
|
||
|
|
#endif
|
||
|
|
}
|
||
|
|
|
||
|
|
return(p);
|
||
|
|
}
|
||
|
|
|
||
|
|
int rt_hw_luminaryif_init(void)
|
||
|
|
{
|
||
|
|
rt_err_t result;
|
||
|
|
unsigned long ulUser0, ulUser1;
|
||
|
|
|
||
|
|
/* Enable and Reset the Ethernet Controller. */
|
||
|
|
SysCtlPeripheralEnable(SYSCTL_PERIPH_ETH);
|
||
|
|
SysCtlPeripheralReset(SYSCTL_PERIPH_ETH);
|
||
|
|
|
||
|
|
/*
|
||
|
|
Enable Port F for Ethernet LEDs.
|
||
|
|
LED0 Bit 3 Output
|
||
|
|
LED1 Bit 2 Output
|
||
|
|
*/
|
||
|
|
SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOF);
|
||
|
|
/* GPIODirModeSet and GPIOPadConfigSet */
|
||
|
|
GPIOPinTypeEthernetLED(GPIO_PORTF_BASE, GPIO_PIN_2 | GPIO_PIN_3);
|
||
|
|
GPIOPinConfigure(GPIO_PF2_LED1);
|
||
|
|
GPIOPinConfigure(GPIO_PF3_LED0);
|
||
|
|
|
||
|
|
FlashUserSet(0x00371200, 0x00563412); /* OUI:00-12-37 (hex) Texas Instruments, only for test */
|
||
|
|
/* Configure the hardware MAC address */
|
||
|
|
FlashUserGet(&ulUser0, &ulUser1);
|
||
|
|
if((ulUser0 == 0xffffffff) || (ulUser1 == 0xffffffff))
|
||
|
|
{
|
||
|
|
rt_kprintf("Fatal error in geting MAC address\n");
|
||
|
|
}
|
||
|
|
|
||
|
|
/* init rt-thread device interface */
|
||
|
|
luminaryif_dev_entry.parent.parent.init = luminaryif_init;
|
||
|
|
luminaryif_dev_entry.parent.parent.open = luminaryif_open;
|
||
|
|
luminaryif_dev_entry.parent.parent.close = luminaryif_close;
|
||
|
|
luminaryif_dev_entry.parent.parent.read = luminaryif_read;
|
||
|
|
luminaryif_dev_entry.parent.parent.write = luminaryif_write;
|
||
|
|
luminaryif_dev_entry.parent.parent.control = luminaryif_control;
|
||
|
|
luminaryif_dev_entry.parent.eth_rx = luminaryif_rx;
|
||
|
|
luminaryif_dev_entry.parent.eth_tx = luminaryif_tx;
|
||
|
|
|
||
|
|
/*
|
||
|
|
Convert the 24/24 split MAC address from NV ram into a 32/16 split MAC
|
||
|
|
address needed to program the hardware registers, then program the MAC
|
||
|
|
address into the Ethernet Controller registers.
|
||
|
|
*/
|
||
|
|
luminaryif_dev_entry.dev_addr[0] = ((ulUser0 >> 0) & 0xff);
|
||
|
|
luminaryif_dev_entry.dev_addr[1] = ((ulUser0 >> 8) & 0xff);
|
||
|
|
luminaryif_dev_entry.dev_addr[2] = ((ulUser0 >> 16) & 0xff);
|
||
|
|
luminaryif_dev_entry.dev_addr[3] = ((ulUser1 >> 0) & 0xff);
|
||
|
|
luminaryif_dev_entry.dev_addr[4] = ((ulUser1 >> 8) & 0xff);
|
||
|
|
luminaryif_dev_entry.dev_addr[5] = ((ulUser1 >> 16) & 0xff);
|
||
|
|
|
||
|
|
/* Program the hardware with it's MAC address (for filtering). */
|
||
|
|
EthernetMACAddrSet(ETH_BASE, luminaryif_dev_entry.dev_addr);
|
||
|
|
|
||
|
|
rt_sem_init(&tx_sem, "emac", 1, RT_IPC_FLAG_FIFO);
|
||
|
|
|
||
|
|
result = eth_device_init(&(luminaryif_dev->parent), "E0");
|
||
|
|
|
||
|
|
return result;
|
||
|
|
}
|
||
|
|
|