rt-thread/bsp/samd21/sam_d2x_asflib/common/services/clock/genclk.h

200 lines
5.7 KiB
C
Raw Normal View History

2017-08-30 12:18:28 +08:00
/**
* \file
*
* \brief Generic clock management
*
* Copyright (c) 2010-2015 Atmel Corporation. All rights reserved.
*
* \asf_license_start
*
* \page License
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* 3. The name of Atmel may not be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* 4. This software may only be redistributed and used in connection with an
* Atmel microcontroller product.
*
* THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
* \asf_license_stop
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef CLK_GENCLK_H_INCLUDED
#define CLK_GENCLK_H_INCLUDED
#include "parts.h"
#if SAM3S
# include "sam3s/genclk.h"
#elif SAM3U
# include "sam3u/genclk.h"
#elif SAM3N
# include "sam3n/genclk.h"
#elif SAM3XA
# include "sam3x/genclk.h"
#elif SAM4S
# include "sam4s/genclk.h"
#elif SAM4L
# include "sam4l/genclk.h"
#elif SAM4E
# include "sam4e/genclk.h"
#elif SAM4N
# include "sam4n/genclk.h"
#elif SAM4C
# include "sam4c/genclk.h"
#elif SAM4CM
# include "sam4cm/genclk.h"
#elif SAM4CP
# include "sam4cp/genclk.h"
#elif SAMG
# include "samg/genclk.h"
#elif SAMV71
# include "samv71/genclk.h"
#elif SAMV70
# include "samv70/genclk.h"
#elif SAME70
# include "same70/genclk.h"
#elif SAMS70
# include "sams70/genclk.h"
#elif (UC3A0 || UC3A1)
# include "uc3a0_a1/genclk.h"
#elif UC3A3
# include "uc3a3_a4/genclk.h"
#elif UC3B
# include "uc3b0_b1/genclk.h"
#elif UC3C
# include "uc3c/genclk.h"
#elif UC3D
# include "uc3d/genclk.h"
#elif UC3L
# include "uc3l/genclk.h"
#else
# error Unsupported chip type
#endif
/**
* \ingroup clk_group
* \defgroup genclk_group Generic Clock Management
*
* Generic clocks are configurable clocks which run outside the system
* clock domain. They are often connected to peripherals which have an
* asynchronous component running independently of the bus clock, e.g.
* USB controllers, low-power timers and RTCs, etc.
*
* Note that not all platforms have support for generic clocks; on such
* platforms, this API will not be available.
*
* @{
*/
/**
* \def GENCLK_DIV_MAX
* \brief Maximum divider supported by the generic clock implementation
*/
/**
* \enum genclk_source
* \brief Generic clock source ID
*
* Each generic clock may be generated from a different clock source.
* These are the available alternatives provided by the chip.
*/
//! \name Generic clock configuration
//@{
/**
* \struct genclk_config
* \brief Hardware representation of a set of generic clock parameters
*/
/**
* \fn void genclk_config_defaults(struct genclk_config *cfg,
* unsigned int id)
* \brief Initialize \a cfg to the default configuration for the clock
* identified by \a id.
*/
/**
* \fn void genclk_config_read(struct genclk_config *cfg, unsigned int id)
* \brief Read the currently active configuration of the clock
* identified by \a id into \a cfg.
*/
/**
* \fn void genclk_config_write(const struct genclk_config *cfg,
* unsigned int id)
* \brief Activate the configuration \a cfg on the clock identified by
* \a id.
*/
/**
* \fn void genclk_config_set_source(struct genclk_config *cfg,
* enum genclk_source src)
* \brief Select a new source clock \a src in configuration \a cfg.
*/
/**
* \fn void genclk_config_set_divider(struct genclk_config *cfg,
* unsigned int divider)
* \brief Set a new \a divider in configuration \a cfg.
*/
/**
* \fn void genclk_enable_source(enum genclk_source src)
* \brief Enable the source clock \a src used by a generic clock.
*/
//@}
//! \name Enabling and disabling Generic Clocks
//@{
/**
* \fn void genclk_enable(const struct genclk_config *cfg, unsigned int id)
* \brief Activate the configuration \a cfg on the clock identified by
* \a id and enable it.
*/
/**
* \fn void genclk_disable(unsigned int id)
* \brief Disable the generic clock identified by \a id.
*/
//@}
/**
* \brief Enable the configuration defined by \a src and \a divider
* for the generic clock identified by \a id.
*
* \param id The ID of the generic clock.
* \param src The source clock of the generic clock.
* \param divider The divider used to generate the generic clock.
*/
static inline void genclk_enable_config(unsigned int id, enum genclk_source src, unsigned int divider)
{
struct genclk_config gcfg;
genclk_config_defaults(&gcfg, id);
genclk_enable_source(src);
genclk_config_set_source(&gcfg, src);
genclk_config_set_divider(&gcfg, divider);
genclk_enable(&gcfg, id);
}
//! @}
#endif /* CLK_GENCLK_H_INCLUDED */