rt-thread/bsp/lm3s9b9x/Libraries/inc/hw_udma.h

//*****************************************************************************
//
// hw_udma.h - Macros for use in accessing the UDMA registers.
//
// Copyright (c) 2007-2011 Texas Instruments Incorporated.  All rights reserved.
// Software License Agreement
// 
// Texas Instruments (TI) is supplying this software for use solely and
// exclusively on TI's microcontroller products. The software is owned by
// TI and/or its suppliers, and is protected under applicable copyright
// laws. You may not combine this software with "viral" open-source
// software in order to form a larger program.
// 
// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
// DAMAGES, FOR ANY REASON WHATSOEVER.
// 
// This is part of revision 8264 of the Stellaris Firmware Development Package.
//
//*****************************************************************************

#ifndef __HW_UDMA_H__
#define __HW_UDMA_H__

//*****************************************************************************
//
// The following are defines for the Micro Direct Memory Access register
// addresses.
//
//*****************************************************************************
#define UDMA_STAT               0x400FF000  // DMA Status
#define UDMA_CFG                0x400FF004  // DMA Configuration
#define UDMA_CTLBASE            0x400FF008  // DMA Channel Control Base Pointer
#define UDMA_ALTBASE            0x400FF00C  // DMA Alternate Channel Control
                                            // Base Pointer
#define UDMA_WAITSTAT           0x400FF010  // DMA Channel Wait-on-Request
                                            // Status
#define UDMA_SWREQ              0x400FF014  // DMA Channel Software Request
#define UDMA_USEBURSTSET        0x400FF018  // DMA Channel Useburst Set
#define UDMA_USEBURSTCLR        0x400FF01C  // DMA Channel Useburst Clear
#define UDMA_REQMASKSET         0x400FF020  // DMA Channel Request Mask Set
#define UDMA_REQMASKCLR         0x400FF024  // DMA Channel Request Mask Clear
#define UDMA_ENASET             0x400FF028  // DMA Channel Enable Set
#define UDMA_ENACLR             0x400FF02C  // DMA Channel Enable Clear
#define UDMA_ALTSET             0x400FF030  // DMA Channel Primary Alternate
                                            // Set
#define UDMA_ALTCLR             0x400FF034  // DMA Channel Primary Alternate
                                            // Clear
#define UDMA_PRIOSET            0x400FF038  // DMA Channel Priority Set
#define UDMA_PRIOCLR            0x400FF03C  // DMA Channel Priority Clear
#define UDMA_ERRCLR             0x400FF04C  // DMA Bus Error Clear
#define UDMA_CHASGN             0x400FF500  // DMA Channel Assignment
#define UDMA_CHIS               0x400FF504  // DMA Channel Interrupt Status
#define UDMA_CHMAP0             0x400FF510  // DMA Channel Map Select 0
#define UDMA_CHMAP1             0x400FF514  // DMA Channel Map Select 1
#define UDMA_CHMAP2             0x400FF518  // DMA Channel Map Select 2
#define UDMA_CHMAP3             0x400FF51C  // DMA Channel Map Select 3

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_STAT register.
//
//*****************************************************************************
#define UDMA_STAT_DMACHANS_M    0x001F0000  // Available uDMA Channels Minus 1
#define UDMA_STAT_STATE_M       0x000000F0  // Control State Machine Status
#define UDMA_STAT_STATE_IDLE    0x00000000  // Idle
#define UDMA_STAT_STATE_RD_CTRL 0x00000010  // Reading channel controller data
#define UDMA_STAT_STATE_RD_SRCENDP \
                                0x00000020  // Reading source end pointer
#define UDMA_STAT_STATE_RD_DSTENDP \
                                0x00000030  // Reading destination end pointer
#define UDMA_STAT_STATE_RD_SRCDAT \
                                0x00000040  // Reading source data
#define UDMA_STAT_STATE_WR_DSTDAT \
                                0x00000050  // Writing destination data
#define UDMA_STAT_STATE_WAIT    0x00000060  // Waiting for uDMA request to
                                            // clear
#define UDMA_STAT_STATE_WR_CTRL 0x00000070  // Writing channel controller data
#define UDMA_STAT_STATE_STALL   0x00000080  // Stalled
#define UDMA_STAT_STATE_DONE    0x00000090  // Done
#define UDMA_STAT_STATE_UNDEF   0x000000A0  // Undefined
#define UDMA_STAT_MASTEN        0x00000001  // Master Enable Status
#define UDMA_STAT_DMACHANS_S    16

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_CFG register.
//
//*****************************************************************************
#define UDMA_CFG_MASTEN         0x00000001  // Controller Master Enable

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_CTLBASE register.
//
//*****************************************************************************
#define UDMA_CTLBASE_ADDR_M     0xFFFFFC00  // Channel Control Base Address
#define UDMA_CTLBASE_ADDR_S     10

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_ALTBASE register.
//
//*****************************************************************************
#define UDMA_ALTBASE_ADDR_M     0xFFFFFFFF  // Alternate Channel Address
                                            // Pointer
#define UDMA_ALTBASE_ADDR_S     0

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_WAITSTAT register.
//
//*****************************************************************************
#define UDMA_WAITSTAT_WAITREQ_M 0xFFFFFFFF  // Channel [n] Wait Status

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_SWREQ register.
//
//*****************************************************************************
#define UDMA_SWREQ_M            0xFFFFFFFF  // Channel [n] Software Request

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_USEBURSTSET
// register.
//
//*****************************************************************************
#define UDMA_USEBURSTSET_SET_M  0xFFFFFFFF  // Channel [n] Useburst Set

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_USEBURSTCLR
// register.
//
//*****************************************************************************
#define UDMA_USEBURSTCLR_CLR_M  0xFFFFFFFF  // Channel [n] Useburst Clear

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_REQMASKSET
// register.
//
//*****************************************************************************
#define UDMA_REQMASKSET_SET_M   0xFFFFFFFF  // Channel [n] Request Mask Set

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_REQMASKCLR
// register.
//
//*****************************************************************************
#define UDMA_REQMASKCLR_CLR_M   0xFFFFFFFF  // Channel [n] Request Mask Clear

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_ENASET register.
//
//*****************************************************************************
#define UDMA_ENASET_SET_M       0xFFFFFFFF  // Channel [n] Enable Set

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_ENACLR register.
//
//*****************************************************************************
#define UDMA_ENACLR_CLR_M       0xFFFFFFFF  // Clear Channel [n] Enable Clear

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_ALTSET register.
//
//*****************************************************************************
#define UDMA_ALTSET_SET_M       0xFFFFFFFF  // Channel [n] Alternate Set

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_ALTCLR register.
//
//*****************************************************************************
#define UDMA_ALTCLR_CLR_M       0xFFFFFFFF  // Channel [n] Alternate Clear

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_PRIOSET register.
//
//*****************************************************************************
#define UDMA_PRIOSET_SET_M      0xFFFFFFFF  // Channel [n] Priority Set

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_PRIOCLR register.
//
//*****************************************************************************
#define UDMA_PRIOCLR_CLR_M      0xFFFFFFFF  // Channel [n] Priority Clear

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_ERRCLR register.
//
//*****************************************************************************
#define UDMA_ERRCLR_ERRCLR      0x00000001  // uDMA Bus Error Status

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_CHASGN register.
//
//*****************************************************************************
#define UDMA_CHASGN_M           0xFFFFFFFF  // Channel [n] Assignment Select
#define UDMA_CHASGN_PRIMARY     0x00000000  // Use the primary channel
                                            // assignment
#define UDMA_CHASGN_SECONDARY   0x00000001  // Use the secondary channel
                                            // assignment

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_CHIS register.
//
//*****************************************************************************
#define UDMA_CHIS_M             0xFFFFFFFF  // Channel [n] Interrupt Status

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_CHMAP0 register.
//
//*****************************************************************************
#define UDMA_CHMAP0_CH7SEL_M    0xF0000000  // uDMA Channel 7 Source Select
#define UDMA_CHMAP0_CH6SEL_M    0x0F000000  // uDMA Channel 6 Source Select
#define UDMA_CHMAP0_CH5SEL_M    0x00F00000  // uDMA Channel 5 Source Select
#define UDMA_CHMAP0_CH4SEL_M    0x000F0000  // uDMA Channel 4 Source Select
#define UDMA_CHMAP0_CH3SEL_M    0x0000F000  // uDMA Channel 3 Source Select
#define UDMA_CHMAP0_CH2SEL_M    0x00000F00  // uDMA Channel 2 Source Select
#define UDMA_CHMAP0_CH1SEL_M    0x000000F0  // uDMA Channel 1 Source Select
#define UDMA_CHMAP0_CH0SEL_M    0x0000000F  // uDMA Channel 0 Source Select
#define UDMA_CHMAP0_CH7SEL_S    28
#define UDMA_CHMAP0_CH6SEL_S    24
#define UDMA_CHMAP0_CH5SEL_S    20
#define UDMA_CHMAP0_CH4SEL_S    16
#define UDMA_CHMAP0_CH3SEL_S    12
#define UDMA_CHMAP0_CH2SEL_S    8
#define UDMA_CHMAP0_CH1SEL_S    4
#define UDMA_CHMAP0_CH0SEL_S    0

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_CHMAP1 register.
//
//*****************************************************************************
#define UDMA_CHMAP1_CH15SEL_M   0xF0000000  // uDMA Channel 15 Source Select
#define UDMA_CHMAP1_CH14SEL_M   0x0F000000  // uDMA Channel 14 Source Select
#define UDMA_CHMAP1_CH13SEL_M   0x00F00000  // uDMA Channel 13 Source Select
#define UDMA_CHMAP1_CH12SEL_M   0x000F0000  // uDMA Channel 12 Source Select
#define UDMA_CHMAP1_CH11SEL_M   0x0000F000  // uDMA Channel 11 Source Select
#define UDMA_CHMAP1_CH10SEL_M   0x00000F00  // uDMA Channel 10 Source Select
#define UDMA_CHMAP1_CH9SEL_M    0x000000F0  // uDMA Channel 9 Source Select
#define UDMA_CHMAP1_CH8SEL_M    0x0000000F  // uDMA Channel 8 Source Select
#define UDMA_CHMAP1_CH15SEL_S   28
#define UDMA_CHMAP1_CH14SEL_S   24
#define UDMA_CHMAP1_CH13SEL_S   20
#define UDMA_CHMAP1_CH12SEL_S   16
#define UDMA_CHMAP1_CH11SEL_S   12
#define UDMA_CHMAP1_CH10SEL_S   8
#define UDMA_CHMAP1_CH9SEL_S    4
#define UDMA_CHMAP1_CH8SEL_S    0

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_CHMAP2 register.
//
//*****************************************************************************
#define UDMA_CHMAP2_CH23SEL_M   0xF0000000  // uDMA Channel 23 Source Select
#define UDMA_CHMAP2_CH22SEL_M   0x0F000000  // uDMA Channel 22 Source Select
#define UDMA_CHMAP2_CH21SEL_M   0x00F00000  // uDMA Channel 21 Source Select
#define UDMA_CHMAP2_CH20SEL_M   0x000F0000  // uDMA Channel 20 Source Select
#define UDMA_CHMAP2_CH19SEL_M   0x0000F000  // uDMA Channel 19 Source Select
#define UDMA_CHMAP2_CH18SEL_M   0x00000F00  // uDMA Channel 18 Source Select
#define UDMA_CHMAP2_CH17SEL_M   0x000000F0  // uDMA Channel 17 Source Select
#define UDMA_CHMAP2_CH16SEL_M   0x0000000F  // uDMA Channel 16 Source Select
#define UDMA_CHMAP2_CH23SEL_S   28
#define UDMA_CHMAP2_CH22SEL_S   24
#define UDMA_CHMAP2_CH21SEL_S   20
#define UDMA_CHMAP2_CH20SEL_S   16
#define UDMA_CHMAP2_CH19SEL_S   12
#define UDMA_CHMAP2_CH18SEL_S   8
#define UDMA_CHMAP2_CH17SEL_S   4
#define UDMA_CHMAP2_CH16SEL_S   0

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_CHMAP3 register.
//
//*****************************************************************************
#define UDMA_CHMAP3_CH31SEL_M   0xF0000000  // uDMA Channel 31 Source Select
#define UDMA_CHMAP3_CH30SEL_M   0x0F000000  // uDMA Channel 30 Source Select
#define UDMA_CHMAP3_CH29SEL_M   0x00F00000  // uDMA Channel 29 Source Select
#define UDMA_CHMAP3_CH28SEL_M   0x000F0000  // uDMA Channel 28 Source Select
#define UDMA_CHMAP3_CH27SEL_M   0x0000F000  // uDMA Channel 27 Source Select
#define UDMA_CHMAP3_CH26SEL_M   0x00000F00  // uDMA Channel 26 Source Select
#define UDMA_CHMAP3_CH25SEL_M   0x000000F0  // uDMA Channel 25 Source Select
#define UDMA_CHMAP3_CH24SEL_M   0x0000000F  // uDMA Channel 24 Source Select
#define UDMA_CHMAP3_CH31SEL_S   28
#define UDMA_CHMAP3_CH30SEL_S   24
#define UDMA_CHMAP3_CH29SEL_S   20
#define UDMA_CHMAP3_CH28SEL_S   16
#define UDMA_CHMAP3_CH27SEL_S   12
#define UDMA_CHMAP3_CH26SEL_S   8
#define UDMA_CHMAP3_CH25SEL_S   4
#define UDMA_CHMAP3_CH24SEL_S   0

//*****************************************************************************
//
// The following are defines for the Micro Direct Memory Access (uDMA) offsets.
//
//*****************************************************************************
#define UDMA_O_SRCENDP          0x00000000  // DMA Channel Source Address End
                                            // Pointer
#define UDMA_O_DSTENDP          0x00000004  // DMA Channel Destination Address
                                            // End Pointer
#define UDMA_O_CHCTL            0x00000008  // DMA Channel Control Word

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_O_SRCENDP register.
//
//*****************************************************************************
#define UDMA_SRCENDP_ADDR_M     0xFFFFFFFF  // Source Address End Pointer
#define UDMA_SRCENDP_ADDR_S     0

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_O_DSTENDP register.
//
//*****************************************************************************
#define UDMA_DSTENDP_ADDR_M     0xFFFFFFFF  // Destination Address End Pointer
#define UDMA_DSTENDP_ADDR_S     0

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_O_CHCTL register.
//
//*****************************************************************************
#define UDMA_CHCTL_DSTINC_M     0xC0000000  // Destination Address Increment
#define UDMA_CHCTL_DSTINC_8     0x00000000  // Byte
#define UDMA_CHCTL_DSTINC_16    0x40000000  // Half-word
#define UDMA_CHCTL_DSTINC_32    0x80000000  // Word
#define UDMA_CHCTL_DSTINC_NONE  0xC0000000  // No increment
#define UDMA_CHCTL_DSTSIZE_M    0x30000000  // Destination Data Size
#define UDMA_CHCTL_DSTSIZE_8    0x00000000  // Byte
#define UDMA_CHCTL_DSTSIZE_16   0x10000000  // Half-word
#define UDMA_CHCTL_DSTSIZE_32   0x20000000  // Word
#define UDMA_CHCTL_SRCINC_M     0x0C000000  // Source Address Increment
#define UDMA_CHCTL_SRCINC_8     0x00000000  // Byte
#define UDMA_CHCTL_SRCINC_16    0x04000000  // Half-word
#define UDMA_CHCTL_SRCINC_32    0x08000000  // Word
#define UDMA_CHCTL_SRCINC_NONE  0x0C000000  // No increment
#define UDMA_CHCTL_SRCSIZE_M    0x03000000  // Source Data Size
#define UDMA_CHCTL_SRCSIZE_8    0x00000000  // Byte
#define UDMA_CHCTL_SRCSIZE_16   0x01000000  // Half-word
#define UDMA_CHCTL_SRCSIZE_32   0x02000000  // Word
#define UDMA_CHCTL_ARBSIZE_M    0x0003C000  // Arbitration Size
#define UDMA_CHCTL_ARBSIZE_1    0x00000000  // 1 Transfer
#define UDMA_CHCTL_ARBSIZE_2    0x00004000  // 2 Transfers
#define UDMA_CHCTL_ARBSIZE_4    0x00008000  // 4 Transfers
#define UDMA_CHCTL_ARBSIZE_8    0x0000C000  // 8 Transfers
#define UDMA_CHCTL_ARBSIZE_16   0x00010000  // 16 Transfers
#define UDMA_CHCTL_ARBSIZE_32   0x00014000  // 32 Transfers
#define UDMA_CHCTL_ARBSIZE_64   0x00018000  // 64 Transfers
#define UDMA_CHCTL_ARBSIZE_128  0x0001C000  // 128 Transfers
#define UDMA_CHCTL_ARBSIZE_256  0x00020000  // 256 Transfers
#define UDMA_CHCTL_ARBSIZE_512  0x00024000  // 512 Transfers
#define UDMA_CHCTL_ARBSIZE_1024 0x00028000  // 1024 Transfers
#define UDMA_CHCTL_XFERSIZE_M   0x00003FF0  // Transfer Size (minus 1)
#define UDMA_CHCTL_NXTUSEBURST  0x00000008  // Next Useburst
#define UDMA_CHCTL_XFERMODE_M   0x00000007  // uDMA Transfer Mode
#define UDMA_CHCTL_XFERMODE_STOP \
                                0x00000000  // Stop
#define UDMA_CHCTL_XFERMODE_BASIC \
                                0x00000001  // Basic
#define UDMA_CHCTL_XFERMODE_AUTO \
                                0x00000002  // Auto-Request
#define UDMA_CHCTL_XFERMODE_PINGPONG \
                                0x00000003  // Ping-Pong
#define UDMA_CHCTL_XFERMODE_MEM_SG \
                                0x00000004  // Memory Scatter-Gather
#define UDMA_CHCTL_XFERMODE_MEM_SGA \
                                0x00000005  // Alternate Memory Scatter-Gather
#define UDMA_CHCTL_XFERMODE_PER_SG \
                                0x00000006  // Peripheral Scatter-Gather
#define UDMA_CHCTL_XFERMODE_PER_SGA \
                                0x00000007  // Alternate Peripheral
                                            // Scatter-Gather
#define UDMA_CHCTL_XFERSIZE_S   4

//*****************************************************************************
//
// The following definitions are deprecated.
//
//*****************************************************************************
#ifndef DEPRECATED

//*****************************************************************************
//
// The following are deprecated defines for the Micro Direct Memory Access
// register addresses.
//
//*****************************************************************************
#define UDMA_CHALT              0x400FF500  // DMA Channel Alternate Select

//*****************************************************************************
//
// The following are deprecated defines for the bit fields in the UDMA_ENASET
// register.
//
//*****************************************************************************
#define UDMA_ENASET_CHENSET_M   0xFFFFFFFF  // Channel [n] Enable Set

//*****************************************************************************
//
// The following are deprecated defines for the bit fields in the UDMA_CHALT
// register.
//
//*****************************************************************************
#define UDMA_CHALT_M            0xFFFFFFFF  // Channel [n] Alternate Assignment
                                            // Select

#endif

#endif // __HW_UDMA_H__