471 lines
21 KiB
C
471 lines
21 KiB
C
|
/******************************************************************************
|
|||
|
|
* Copyright (C) 2017, Huada Semiconductor Co.,Ltd All rights reserved.
|
|||
|
|
*
|
|||
|
|
* This software is owned and published by:
|
|||
|
|
* Huada Semiconductor Co.,Ltd ("HDSC").
|
|||
|
|
*
|
|||
|
|
* BY DOWNLOADING, INSTALLING OR USING THIS SOFTWARE, YOU AGREE TO BE BOUND
|
|||
|
|
* BY ALL THE TERMS AND CONDITIONS OF THIS AGREEMENT.
|
|||
|
|
*
|
|||
|
|
* This software contains source code for use with HDSC
|
|||
|
|
* components. This software is licensed by HDSC to be adapted only
|
|||
|
|
* for use in systems utilizing HDSC components. HDSC shall not be
|
|||
|
|
* responsible for misuse or illegal use of this software for devices not
|
|||
|
|
* supported herein. HDSC is providing this software "AS IS" and will
|
|||
|
|
* not be responsible for issues arising from incorrect user implementation
|
|||
|
|
* of the software.
|
|||
|
|
*
|
|||
|
|
* Disclaimer:
|
|||
|
|
* HDSC MAKES NO WARRANTY, EXPRESS OR IMPLIED, ARISING BY LAW OR OTHERWISE,
|
|||
|
|
* REGARDING THE SOFTWARE (INCLUDING ANY ACOOMPANYING WRITTEN MATERIALS),
|
|||
|
|
* ITS PERFORMANCE OR SUITABILITY FOR YOUR INTENDED USE, INCLUDING,
|
|||
|
|
* WITHOUT LIMITATION, THE IMPLIED WARRANTY OF MERCHANTABILITY, THE IMPLIED
|
|||
|
|
* WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR USE, AND THE IMPLIED
|
|||
|
|
* WARRANTY OF NONINFRINGEMENT.
|
|||
|
|
* HDSC SHALL HAVE NO LIABILITY (WHETHER IN CONTRACT, WARRANTY, TORT,
|
|||
|
|
* NEGLIGENCE OR OTHERWISE) FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT
|
|||
|
|
* LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION,
|
|||
|
|
* LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS) ARISING FROM USE OR
|
|||
|
|
* INABILITY TO USE THE SOFTWARE, INCLUDING, WITHOUT LIMITATION, ANY DIRECT,
|
|||
|
|
* INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OR LOSS OF DATA,
|
|||
|
|
* SAVINGS OR PROFITS,
|
|||
|
|
* EVEN IF Disclaimer HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
|
|||
|
|
* YOU ASSUME ALL RESPONSIBILITIES FOR SELECTION OF THE SOFTWARE TO ACHIEVE YOUR
|
|||
|
|
* INTENDED RESULTS, AND FOR THE INSTALLATION OF, USE OF, AND RESULTS OBTAINED
|
|||
|
|
* FROM, THE SOFTWARE.
|
|||
|
|
*
|
|||
|
|
* This software may be replicated in part or whole for the licensed use,
|
|||
|
|
* with the restriction that this Disclaimer and Copyright notice must be
|
|||
|
|
* included with each copy of this software, whether used in part or whole,
|
|||
|
|
* at all times.
|
|||
|
|
*/
|
|||
|
|
/******************************************************************************/
|
|||
|
|
/** \file adc.h
|
|||
|
|
**
|
|||
|
|
** Header file for AD Converter functions
|
|||
|
|
** @link ADC Group Some description @endlink
|
|||
|
|
**
|
|||
|
|
** - 2017-06-28 Alex First Version
|
|||
|
|
**
|
|||
|
|
******************************************************************************/
|
|||
|
|
|
|||
|
|
#ifndef __ADC_H__
|
|||
|
|
#define __ADC_H__
|
|||
|
|
|
|||
|
|
|
|||
|
|
/******************************************************************************/
|
|||
|
|
/* Include files */
|
|||
|
|
/******************************************************************************/
|
|||
|
|
#include "ddl.h"
|
|||
|
|
|
|||
|
|
|
|||
|
|
/* C binding of definitions if building with C++ compiler */
|
|||
|
|
#ifdef __cplusplus
|
|||
|
|
extern "C"
|
|||
|
|
{
|
|||
|
|
#endif
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \defgroup AdcGroup AD Converter (ADC)
|
|||
|
|
**
|
|||
|
|
******************************************************************************/
|
|||
|
|
|
|||
|
|
//@{
|
|||
|
|
|
|||
|
|
/******************************************************************************
|
|||
|
|
* Global definitions
|
|||
|
|
******************************************************************************/
|
|||
|
|
#define ADC_SCAN_CH0_EN (0x1u) /*!< SCAN模式使用ADC CH0 */
|
|||
|
|
#define ADC_SCAN_CH1_EN (0x1u<<1) /*!< SCAN模式使用ADC CH1 */
|
|||
|
|
#define ADC_SCAN_CH2_EN (0x1u<<2) /*!< SCAN模式使用ADC CH2 */
|
|||
|
|
#define ADC_SCAN_CH3_EN (0x1u<<3) /*!< SCAN模式使用ADC CH3 */
|
|||
|
|
#define ADC_SCAN_CH4_EN (0x1u<<4) /*!< SCAN模式使用ADC CH4 */
|
|||
|
|
#define ADC_SCAN_CH5_EN (0x1u<<5) /*!< SCAN模式使用ADC CH5 */
|
|||
|
|
#define ADC_SCAN_CH6_EN (0x1u<<6) /*!< SCAN模式使用ADC CH6 */
|
|||
|
|
#define ADC_SCAN_CH7_EN (0x1u<<7) /*!< SCAN模式使用ADC CH7 */
|
|||
|
|
|
|||
|
|
|
|||
|
|
/******************************************************************************
|
|||
|
|
** Global type definitions
|
|||
|
|
*****************************************************************************/
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief ADC转换模式
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_adc_mode
|
|||
|
|
{
|
|||
|
|
AdcSglMode = 0u, /*!< 单输入通道单次转换模式 */
|
|||
|
|
AdcScanMode = 1u, /*!< 多输入通道顺序/插队扫描转换模式*/
|
|||
|
|
}en_adc_mode_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief ADC时钟分频选择
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_adc_clk_sel
|
|||
|
|
{
|
|||
|
|
AdcMskClkDiv1 = 0u<<2, /*!< PCLK */
|
|||
|
|
AdcMskClkDiv2 = 1u<<2, /*!< 1/2 PCLK */
|
|||
|
|
AdcMskClkDiv4 = 2u<<2, /*!< 1/4 PCLK */
|
|||
|
|
AdcMskClkDiv8 = 3u<<2, /*!< 1/8 PCLK */
|
|||
|
|
} en_adc_clk_div_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief ADC参考电压
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_adc_ref_vol_sel
|
|||
|
|
{
|
|||
|
|
AdcMskRefVolSelInBgr1p5 = 0u<<9, /*!<内部参考电压1.5V(SPS<=200kHz)*/
|
|||
|
|
AdcMskRefVolSelInBgr2p5 = 1u<<9, /*!<内部参考电压2.5V(avdd>3V,SPS<=200kHz)*/
|
|||
|
|
AdcMskRefVolSelExtern1 = 2u<<9, /*!<外部输入(max avdd) PB01*/
|
|||
|
|
AdcMskRefVolSelAVDD = 3u<<9, /*!<AVDD*/
|
|||
|
|
}en_adc_ref_vol_sel_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief ADC转换通道选择
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_adc_samp_ch_sel
|
|||
|
|
{
|
|||
|
|
AdcExInputCH0 = 0u, /*!<使用PA00*/
|
|||
|
|
AdcExInputCH1 = 1u, /*!<使用PA01*/
|
|||
|
|
AdcExInputCH2 = 2u, /*!<使用PA02*/
|
|||
|
|
AdcExInputCH3 = 3u, /*!<使用PA03*/
|
|||
|
|
AdcExInputCH4 = 4u, /*!<使用PA04*/
|
|||
|
|
AdcExInputCH5 = 5u, /*!<使用PA05*/
|
|||
|
|
AdcExInputCH6 = 6u, /*!<使用PA06*/
|
|||
|
|
AdcExInputCH7 = 7u, /*!<使用PA07*/
|
|||
|
|
AdcExInputCH8 = 8u, /*!<使用PB00*/
|
|||
|
|
AdcExInputCH9 = 9u, /*!<使用PB01*/
|
|||
|
|
AdcExInputCH10 = 10u, /*!<使用PC00*/
|
|||
|
|
AdcExInputCH11 = 11u, /*!<使用PC01*/
|
|||
|
|
AdcExInputCH12 = 12u, /*!<使用PC02*/
|
|||
|
|
AdcExInputCH13 = 13u, /*!<使用PC03*/
|
|||
|
|
AdcExInputCH14 = 14u, /*!<使用PC04*/
|
|||
|
|
AdcExInputCH15 = 15u, /*!<使用PC05*/
|
|||
|
|
AdcExInputCH16 = 16u, /*!<使用PB02*/
|
|||
|
|
AdcExInputCH17 = 17u, /*!<使用PB10*/
|
|||
|
|
AdcExInputCH18 = 18u, /*!<使用PB11*/
|
|||
|
|
AdcExInputCH19 = 19u, /*!<使用PB12*/
|
|||
|
|
AdcExInputCH20 = 20u, /*!<使用PB13*/
|
|||
|
|
AdcExInputCH21 = 21u, /*!<使用PB14*/
|
|||
|
|
AdcExInputCH22 = 22u, /*!<使用PB15*/
|
|||
|
|
AdcExInputCH23 = 23u, /*!<使用PE15*/
|
|||
|
|
AdcExInputCH24 = 24u, /*!<使用PE14*/
|
|||
|
|
AdcExInputCH25 = 25u, /*!<使用PE13*/
|
|||
|
|
|
|||
|
|
AdcDacInput = 26u, /*!<使用DAC输出(必须使用输入增益)*/
|
|||
|
|
AdcAVccdiv3Input = 27u, /*!<使用1/3 AVCC(必须使用输入增益)*/
|
|||
|
|
AdcAiTsInput = 28u, /*!<使用内置温度传感器BGR_TS(必须使用输入增益)*/
|
|||
|
|
AdcVref1_2Input = 29u, /*!<使用内部基准1.2V(必须使用输入增益)*/
|
|||
|
|
|
|||
|
|
}en_adc_samp_ch_sel_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief ADC输入信号放大器控制
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_adc_op_buf
|
|||
|
|
{
|
|||
|
|
AdcMskBufEnable = 1u<<11, /*!< 打开放大器BUF */
|
|||
|
|
AdcMskBufDisable = 0u, /*!< 关闭放大器BUF */
|
|||
|
|
} en_adc_op_buf_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief ADC采样周期选择
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_adc_samp_cycle_sel
|
|||
|
|
{
|
|||
|
|
AdcMskSampCycle4Clk = 0u<<12, /*!<4个采样时钟*/
|
|||
|
|
AdcMskSampCycle6Clk = 1u<<12, /*!<6个采样时钟*/
|
|||
|
|
AdcMskSampCycle8Clk = 2u<<12, /*!<8个采样时钟*/
|
|||
|
|
AdcMskSampCycle12Clk = 3u<<12, /*!<12个采样时钟*/
|
|||
|
|
|
|||
|
|
}en_adc_samp_cycle_sel_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief ADC内部参考电压使能控制
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_adc_in_ref
|
|||
|
|
{
|
|||
|
|
AdcMskInRefEnable = 1u<<14, /*!< 内部参考电压使能 */
|
|||
|
|
AdcMskInRefDisable = 0u, /*!< 内部参考电压关闭 */
|
|||
|
|
}en_adc_in_ref_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief ADC周边模块反射源选择
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_adc_trig_sel
|
|||
|
|
{
|
|||
|
|
AdcMskTrigTimer0 = 1u<<0, /*!<选择timer0中断源，自动触发ADC采样*/
|
|||
|
|
AdcMskTrigTimer1 = 1u<<1, /*!<选择timer1中断源，自动触发ADC采样*/
|
|||
|
|
AdcMskTrigTimer2 = 1u<<2, /*!<选择timer2中断源，自动触发ADC采样*/
|
|||
|
|
AdcMskTrigTimer3 = 1u<<3, /*!<选择timer3中断源，自动触发ADC采样*/
|
|||
|
|
AdcMskTrigTimer4 = 1u<<4, /*!<选择timer4中断源，自动触发ADC采样*/
|
|||
|
|
AdcMskTrigTimer5 = 1u<<5, /*!<选择timer5中断源，自动触发ADC采样*/
|
|||
|
|
AdcMskTrigTimer6 = 1u<<6, /*!<选择timer6中断源，自动触发ADC采样*/
|
|||
|
|
AdcMskTrigUart0 = 1u<<7, /*!<选择uart0中断源，自动触发ADC采样*/
|
|||
|
|
AdcMskTrigUart1 = 1u<<8, /*!<选择uart1中断源，自动触发ADC采样*/
|
|||
|
|
AdcMskTrigLpuart0 = 1u<<9, /*!<选择lpuart0中断源，自动触发ADC采样*/
|
|||
|
|
AdcMskTrigLpuart1 = 1u<<10, /*!<选择lpuart1中断源，自动触发ADC采样*/
|
|||
|
|
AdcMskTrigVC0 = 1u<<11, /*!<选择VC0中断源，自动触发ADC采样*/
|
|||
|
|
AdcMskTrigVC1 = 1u<<12, /*!<选择VC1中断源，自动触发ADC采样*/
|
|||
|
|
AdcMskTrigRTC = 1u<<13, /*!<选择RTC中断源，自动触发ADC采样*/
|
|||
|
|
AdcMskTrigPCA = 1u<<14, /*!<选择PCA中断源，自动触发ADC采样*/
|
|||
|
|
AdcMskTrigSPI0 = 1u<<15, /*!<选择SPI0中断源，自动触发ADC采样*/
|
|||
|
|
AdcMskTrigSPI1 = 1u<<16, /*!<选择SPI1中断源，自动触发ADC采样*/
|
|||
|
|
AdcMskTrigDMA = 1u<<17, /*!<选择DMA中断源，自动触发ADC采样*/
|
|||
|
|
AdcMskTrigPA03 = 1u<<18, /*!<选择PA03中断源，自动触发ADC采样*/
|
|||
|
|
AdcMskTrigPB03 = 1u<<19, /*!<选择PB03中断源，自动触发ADC采样*/
|
|||
|
|
AdcMskTrigPC03 = 1u<<20, /*!<选择PC03中断源，自动触发ADC采样*/
|
|||
|
|
AdcMskTrigPD03 = 1u<<21, /*!<选择PD03中断源，自动触发ADC采样*/
|
|||
|
|
AdcMskTrigPA07 = 1u<<22, /*!<选择PA07中断源，自动触发ADC采样*/
|
|||
|
|
AdcMskTrigPB07 = 1u<<23, /*!<选择PB07中断源，自动触发ADC采样*/
|
|||
|
|
AdcMskTrigPC07 = 1u<<24, /*!<选择PC07中断源，自动触发ADC采样*/
|
|||
|
|
AdcMskTrigPD07 = 1u<<25, /*!<选择PD07中断源，自动触发ADC采样*/
|
|||
|
|
AdcMskTrigPA11 = 1u<<26, /*!<选择PA11中断源，自动触发ADC采样*/
|
|||
|
|
AdcMskTrigPB11 = 1u<<27, /*!<选择PB11中断源，自动触发ADC采样*/
|
|||
|
|
AdcMskTrigPC11 = 1u<<28, /*!<选择PC11中断源，自动触发ADC采样*/
|
|||
|
|
AdcMskTrigPA15 = 1u<<29, /*!<选择PA15中断源，自动触发ADC采样*/
|
|||
|
|
AdcMskTrigPB15 = 1u<<30, /*!<选择PB15中断源，自动触发ADC采样*/
|
|||
|
|
AdcMskTrigPC15 = 1u<<31, /*!<选择PC15中断源，自动触发ADC采样*/
|
|||
|
|
}en_adc_trig_sel_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief ADC外部触发源寄存器选择
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_adc_ext_trig_sel
|
|||
|
|
{
|
|||
|
|
AdcExtTrig0 = 0u, /*!<单次及顺序扫描转换 外部触发源选择寄存器*/
|
|||
|
|
AdcExtTrig1 = 1u, /*!<插队扫描转换 外部触发源选择寄存器*/
|
|||
|
|
}en_adc_ext_trig_sel_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief ADC顺序转换通道
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_adc_sqr_chmux
|
|||
|
|
{
|
|||
|
|
AdcSQRCH0MUX = 0u, /*!<顺序扫描模式转换通道0*/
|
|||
|
|
AdcSQRCH1MUX = 1u, /*!<顺序扫描模式转换通道1*/
|
|||
|
|
AdcSQRCH2MUX = 2u, /*!<顺序扫描模式转换通道2*/
|
|||
|
|
AdcSQRCH3MUX = 3u, /*!<顺序扫描模式转换通道3*/
|
|||
|
|
AdcSQRCH4MUX = 4u, /*!<顺序扫描模式转换通道4*/
|
|||
|
|
AdcSQRCH5MUX = 5u, /*!<顺序扫描模式转换通道5*/
|
|||
|
|
AdcSQRCH6MUX = 6u, /*!<顺序扫描模式转换通道6*/
|
|||
|
|
AdcSQRCH7MUX = 7u, /*!<顺序扫描模式转换通道7*/
|
|||
|
|
AdcSQRCH8MUX = 8u, /*!<顺序扫描模式转换通道8*/
|
|||
|
|
AdcSQRCH9MUX = 9u, /*!<顺序扫描模式转换通道9*/
|
|||
|
|
AdcSQRCH10MUX = 10u, /*!<顺序扫描模式转换通道10*/
|
|||
|
|
AdcSQRCH11MUX = 11u, /*!<顺序扫描模式转换通道11*/
|
|||
|
|
AdcSQRCH12MUX = 12u, /*!<顺序扫描模式转换通道12*/
|
|||
|
|
AdcSQRCH13MUX = 13u, /*!<顺序扫描模式转换通道13*/
|
|||
|
|
AdcSQRCH14MUX = 14u, /*!<顺序扫描模式转换通道14*/
|
|||
|
|
AdcSQRCH15MUX = 15u, /*!<顺序扫描模式转换通道15*/
|
|||
|
|
}en_adc_sqr_chmux_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief ADC插队转换通道
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_adc_jqr_chmux
|
|||
|
|
{
|
|||
|
|
AdcJQRCH0MUX = 0u, /*!<转换通道0*/
|
|||
|
|
AdcJQRCH1MUX = 1u, /*!<转换通道1*/
|
|||
|
|
AdcJQRCH2MUX = 2u, /*!<转换通道2*/
|
|||
|
|
AdcJQRCH3MUX = 3u, /*!<转换通道3*/
|
|||
|
|
}en_adc_jqr_chmux_t;
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief ADC结果对齐方式
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_adc_align
|
|||
|
|
{
|
|||
|
|
AdcAlignRight = 0u,
|
|||
|
|
AdcAlignLeft = 1u,
|
|||
|
|
}en_adc_align_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief ADC转换结果自动累加功能
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_adc_result_acc
|
|||
|
|
{
|
|||
|
|
AdcResultAccEnable = 1u,
|
|||
|
|
AdcResultAccDisable = 0u,
|
|||
|
|
}en_adc_result_acc_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief ADC中断类型定义
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_adc_irq_type
|
|||
|
|
{
|
|||
|
|
AdcMskIrqJqr = 1u<<5, /*!<ADC插队扫描转换完成*/
|
|||
|
|
AdcMskIrqSqr = 1u<<4, /*!<ADC顺序扫描转换完成*/
|
|||
|
|
AdcMskIrqReg = 1u<<3, /*!<ADC转换结果比较区间内*/
|
|||
|
|
AdcMskIrqHt = 1u<<2, /*!<ADC转换结果高于HT*/
|
|||
|
|
AdcMskIrqLt = 1u<<1, /*!<ADC转换结果低于LT*/
|
|||
|
|
AdcMskIrqSgl = 1u<<0, /*!<ADC单次转换完成*/
|
|||
|
|
|
|||
|
|
}en_adc_irq_type_t;
|
|||
|
|
|
|||
|
|
|
|||
|
|
/******************************************************************************
|
|||
|
|
** Extern type definitions ('typedef')
|
|||
|
|
******************************************************************************/
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief ADC初始化配置结构体
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef struct stc_adc_cfg
|
|||
|
|
{
|
|||
|
|
en_adc_mode_t enAdcMode; /*! ADC转换模式*/
|
|||
|
|
|
|||
|
|
en_adc_clk_div_t enAdcClkDiv; /*! ADC时钟选择*/
|
|||
|
|
en_adc_samp_cycle_sel_t enAdcSampCycleSel; /*! ADC采样周期选择*/
|
|||
|
|
en_adc_ref_vol_sel_t enAdcRefVolSel; /*! ADC参考电压选择*/
|
|||
|
|
en_adc_op_buf_t enAdcOpBuf; /*! ADC输入信号放大器控制使能*/
|
|||
|
|
en_adc_in_ref_t enInRef; /*! ADC内部参考电压使能*/
|
|||
|
|
|
|||
|
|
en_adc_align_t enAdcAlign; /*! ADC转换结果对齐控制*/
|
|||
|
|
}stc_adc_cfg_t;
|
|||
|
|
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief ADC顺序扫描模式配置结构体
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef struct stc_adc_sqr_cfg
|
|||
|
|
{
|
|||
|
|
uint8_t u8SqrCnt; /*! ADC顺序扫描转换次数*/
|
|||
|
|
en_adc_result_acc_t enResultAcc; /*! ADC转换结果自动累加功能*/
|
|||
|
|
boolean_t bSqrDmaTrig; /*! ADC顺序扫描转换完成DMA触发使能*/
|
|||
|
|
}stc_adc_sqr_cfg_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief ADC插队扫描模式配置结构体
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef struct stc_adc_jqr_cfg
|
|||
|
|
{
|
|||
|
|
uint8_t u8JqrCnt; /*! ADC顺序扫描转换次数*/
|
|||
|
|
boolean_t bJqrDmaTrig; /*! ADC插队扫描转换完成DMA触发使能*/
|
|||
|
|
}stc_adc_jqr_cfg_t;
|
|||
|
|
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief ADC比较功能配置结构体
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef struct stc_adc_threshold_cfg
|
|||
|
|
{
|
|||
|
|
boolean_t bAdcRegCmp ; /*!ADC区间使能*/
|
|||
|
|
boolean_t bAdcHtCmp ; /*!ADC上超出区间使能*/
|
|||
|
|
boolean_t bAdcLtCmp ; /*!ADC下超出区间使能*/
|
|||
|
|
|
|||
|
|
uint32_t u32AdcHighThd; /*!ADC比较上阈值*/
|
|||
|
|
uint32_t u32AdcLowThd; /*!ADC比较下阈值*/
|
|||
|
|
|
|||
|
|
en_adc_samp_ch_sel_t enSampChSel; /*!ADC采样通道选择*/
|
|||
|
|
|
|||
|
|
}stc_adc_threshold_cfg_t;
|
|||
|
|
|
|||
|
|
|
|||
|
|
/******************************************************************************
|
|||
|
|
* Global variable definitions ('extern')
|
|||
|
|
******************************************************************************/
|
|||
|
|
|
|||
|
|
/******************************************************************************
|
|||
|
|
* Global function prototypes (definition in C source)
|
|||
|
|
******************************************************************************/
|
|||
|
|
//ADC 初始化
|
|||
|
|
en_result_t Adc_Init(stc_adc_cfg_t* pstcAdcCfg);
|
|||
|
|
|
|||
|
|
//ADC 中断使能
|
|||
|
|
void Adc_EnableIrq(void);
|
|||
|
|
//ADC 中断禁止
|
|||
|
|
void Adc_DisableIrq(void);
|
|||
|
|
|
|||
|
|
//ADC 中断/采样完成状态获取
|
|||
|
|
boolean_t Adc_GetIrqStatus(en_adc_irq_type_t enAdcIrq);
|
|||
|
|
//ADC 中断/采样完成状态清除
|
|||
|
|
void Adc_ClrIrqStatus(en_adc_irq_type_t enAdcIrq);
|
|||
|
|
|
|||
|
|
//ADC 使能
|
|||
|
|
void Adc_Enable(void);
|
|||
|
|
//ADC 禁止
|
|||
|
|
void Adc_Disable(void);
|
|||
|
|
|
|||
|
|
//ADC 顺序扫描模式配置
|
|||
|
|
en_result_t Adc_SqrModeCfg(stc_adc_sqr_cfg_t* pstcAdcSqrCfg);
|
|||
|
|
//ADC 插队扫描模式配置
|
|||
|
|
en_result_t Adc_JqrModeCfg(stc_adc_jqr_cfg_t* pstcAdcJqrCfg);
|
|||
|
|
|
|||
|
|
//ADC Sgl 单次转换模式通道选择配置
|
|||
|
|
en_result_t Adc_CfgSglChannel( en_adc_samp_ch_sel_t enstcAdcSampCh);
|
|||
|
|
//ADC SQR 顺序扫描转换模式通道选择配置
|
|||
|
|
en_result_t Adc_CfgSqrChannel(en_adc_sqr_chmux_t enstcAdcSqrChMux, en_adc_samp_ch_sel_t enstcAdcSampCh);
|
|||
|
|
//ADC JQR 插队扫描转换模式通道选择配置
|
|||
|
|
en_result_t Adc_CfgJqrChannel(en_adc_jqr_chmux_t enstcAdcJqrChMux, en_adc_samp_ch_sel_t enstcAdcSampCh);
|
|||
|
|
|
|||
|
|
///<ADC 单次转换外部触发源配置
|
|||
|
|
void Adc_SglExtTrigCfg(en_adc_trig_sel_t enAdcTrigSel, boolean_t bValue);
|
|||
|
|
///<ADC 顺序扫描转换外部触发源配置
|
|||
|
|
void Adc_SqrExtTrigCfg(en_adc_trig_sel_t enAdcTrigSel, boolean_t bValue);
|
|||
|
|
///<ADC 插队扫描转换外部触发源配置
|
|||
|
|
void Adc_JqrExtTrigCfg(en_adc_trig_sel_t enAdcTrigSel, boolean_t bValue);
|
|||
|
|
|
|||
|
|
//ADC 阈值比较功能配置
|
|||
|
|
void Adc_ThresholdCfg(stc_adc_threshold_cfg_t* pstcAdcThrCfg);
|
|||
|
|
|
|||
|
|
//ADC 单次转换模式启动
|
|||
|
|
void Adc_SGL_Start(void);
|
|||
|
|
//ADC 单次转换模式停止
|
|||
|
|
void Adc_SGL_Stop(void);
|
|||
|
|
|
|||
|
|
//ADC 单次转换模式一直转换模式启动
|
|||
|
|
void Adc_SGL_Always_Start(void);
|
|||
|
|
//ADC 单次转换模式一直转换模式停止
|
|||
|
|
void Adc_SGL_Always_Stop(void);
|
|||
|
|
|
|||
|
|
//ADC 顺序扫描转换模式启动
|
|||
|
|
void Adc_SQR_Start(void);
|
|||
|
|
//ADC 顺序扫描转换模式停止
|
|||
|
|
void Adc_SQR_Stop(void);
|
|||
|
|
|
|||
|
|
//ADC 插队扫描转换模式启动
|
|||
|
|
void Adc_JQR_Start(void);
|
|||
|
|
//ADC 插队扫描转换模式停止
|
|||
|
|
void Adc_JQR_Stop(void);
|
|||
|
|
|
|||
|
|
//获取单次转换采样值
|
|||
|
|
uint32_t Adc_GetSglResult(void);
|
|||
|
|
//获取顺序扫描采样值
|
|||
|
|
uint32_t Adc_GetSqrResult(en_adc_sqr_chmux_t enstcAdcSqrChMux);
|
|||
|
|
//获取插队扫描采样值
|
|||
|
|
uint32_t Adc_GetJqrResult(en_adc_jqr_chmux_t enstcAdcJqrChMux);
|
|||
|
|
|
|||
|
|
//获取累加采样值
|
|||
|
|
uint32_t Adc_GetAccResult(void);
|
|||
|
|
//clear ADC 累加寄存器结果清除
|
|||
|
|
void Adc_ClrAccResult(void);
|
|||
|
|
|
|||
|
|
//@}
|
|||
|
|
#ifdef __cplusplus
|
|||
|
|
}
|
|||
|
|
#endif
|
|||
|
|
|
|||
|
|
#endif /* __ADC_H__ */
|
|||
|
|
/******************************************************************************/
|
|||
|
|
/* EOF (not truncated) */
|
|||
|
|
/******************************************************************************/
|