libs/rt-thread
libs
/
rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
rt-thread/bsp/gd32/arm/gd32470z-lckfb/project.ewd

3057 lines
104 KiB
Plaintext
Raw Normal View History

[GD32]add gd32470z-lckfb (#7022) * --复制gd32450z-eval 作为立创梁山派 gd32470z-lckfb的模板进行移植 * -修改模板keil工程的配置，IROM需要注意总共为1024k，分为Code area 和Data area ，IRAM1为 ： 512K-64K=448K=458752=0x70000。 -重新用ENV生成编译固件 片上SRAM可分为4块，分别为SRAM0（112KB）、SRAM1（16KB）、SRAM2（64KB）和TCMSRAM（64KB）。SRAM0、SRAM1和SRAM2可以被所有的AHB主机访问，然而，TCMSRAM（紧耦合存储器SRAM）只可被Cortex ® -M4内核的数据总线访问。BKPSRAM（备份SRAM）应用于备份域，即使当VDD供电电源掉电时，该SRAM仍可保持其内容。附加SRAM（ADDSRAM）只在一些特殊的GD32F4xx器件中可用。由于采用AHB互联矩阵，上述SRAM块可以同时被不同的AHB主机访问，例如，即使CPU正在访问SRAM0，USBHS也可以访问SRAM1。 * -修改IAR编译的链接脚本 * --修改Flash和RAM大小 -RAM大小为448k是因为512K-64K=448K，其中后面的64K为TCMSRAM（紧耦合存储器SRAM）只可被Cortex ® -M4内核的数据总线访问，先不要乱分配 * -修改MDK链接脚本 * -修改board.h * -修改MCU型号 * -Finsh控制台和LED1闪灯程序工作正常，串口控制台名称错误，从uart改为uart0 -Scons正常生成工程 * -发现GD32固件库当前没有240Mhz的时钟配置，将固件库升级为GD32F4xx_Firmware_Library_V3.0.3-发布时间为2023-01-04 * -修改bsp/gd32/arm/gd32407v-start/board/SConscript文件 * -修改led1和change logs * -按照提交规范使能 One ELF Section per Function（MDK） 并用scons重新生成工程 * -发现整个GD32的IAR模板工程template.eww 是没有的，所以当前是不支持IAR开发的，需要后面学习一下IAR使用再实现了。 * -使用formatting源码格式化工具跑一边gd32470z-lckfb目录 * -使用formatting源码格式化工具跑一遍[components/net/netdev/src/netdev.c] -三个月前的提交多了几个空格
2023-03-11 12:21:31 +08:00
<?xml version="1.0" encoding="UTF-8"?>
<project>
<fileVersion>3</fileVersion>
<configuration>
<name>Debug</name>
<toolchain>
<name>ARM</name>
</toolchain>
<debug>1</debug>
<settings>
<name>C-SPY</name>
<archiveVersion>2</archiveVersion>
<data>
<version>32</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>CInput</name>
<state>1</state>
</option>
<option>
<name>CEndian</name>
<state>1</state>
</option>
<option>
<name>CProcessor</name>
<state>1</state>
</option>
<option>
<name>OCVariant</name>
<state>0</state>
</option>
<option>
<name>MacOverride</name>
<state>0</state>
</option>
<option>
<name>MacFile</name>
<state></state>
</option>
<option>
<name>MemOverride</name>
<state>0</state>
</option>
<option>
<name>MemFile</name>
<state>$TOOLKIT_DIR$\CONFIG\debugger\GigaDevice\GD32F450xK.ddf</state>
</option>
<option>
<name>RunToEnable</name>
<state>1</state>
</option>
<option>
<name>RunToName</name>
<state>main</state>
</option>
<option>
<name>CExtraOptionsCheck</name>
<state>0</state>
</option>
<option>
<name>CExtraOptions</name>
<state></state>
</option>
<option>
<name>CFpuProcessor</name>
<state>1</state>
</option>
<option>
<name>OCDDFArgumentProducer</name>
<state></state>
</option>
<option>
<name>OCDownloadSuppressDownload</name>
<state>0</state>
</option>
<option>
<name>OCDownloadVerifyAll</name>
<state>0</state>
</option>
<option>
<name>OCProductVersion</name>
<state>9.10.2.39304</state>
</option>
<option>
<name>OCDynDriverList</name>
<state>ARMSIM_ID</state>
</option>
<option>
<name>OCLastSavedByProductVersion</name>
<state>9.10.2.39304</state>
</option>
<option>
<name>UseFlashLoader</name>
<state>1</state>
</option>
<option>
<name>CLowLevel</name>
<state>1</state>
</option>
<option>
<name>OCBE8Slave</name>
<state>1</state>
</option>
<option>
<name>MacFile2</name>
<state></state>
</option>
<option>
<name>CDevice</name>
<state>1</state>
</option>
<option>
<name>FlashLoadersV3</name>
<state>$TOOLKIT_DIR$\config\flashloader\GigaDevice\FlashGD32F4xxxK.board</state>
</option>
<option>
<name>OCImagesSuppressCheck1</name>
<state>0</state>
</option>
<option>
<name>OCImagesPath1</name>
<state></state>
</option>
<option>
<name>OCImagesSuppressCheck2</name>
<state>0</state>
</option>
<option>
<name>OCImagesPath2</name>
<state></state>
</option>
<option>
<name>OCImagesSuppressCheck3</name>
<state>0</state>
</option>
<option>
<name>OCImagesPath3</name>
<state></state>
</option>
<option>
<name>OverrideDefFlashBoard</name>
<state>0</state>
</option>
<option>
<name>OCImagesOffset1</name>
<state></state>
</option>
<option>
<name>OCImagesOffset2</name>
<state></state>
</option>
<option>
<name>OCImagesOffset3</name>
<state></state>
</option>
<option>
<name>OCImagesUse1</name>
<state>0</state>
</option>
<option>
<name>OCImagesUse2</name>
<state>0</state>
</option>
<option>
<name>OCImagesUse3</name>
<state>0</state>
</option>
<option>
<name>OCDeviceConfigMacroFile</name>
<state>1</state>
</option>
<option>
<name>OCDebuggerExtraOption</name>
<state>1</state>
</option>
<option>
<name>OCAllMTBOptions</name>
<state>1</state>
</option>
<option>
<name>OCMulticoreNrOfCores</name>
<state>1</state>
</option>
<option>
<name>OCMulticoreWorkspace</name>
<state></state>
</option>
<option>
<name>OCMulticoreSlaveProject</name>
<state></state>
</option>
<option>
<name>OCMulticoreSlaveConfiguration</name>
<state></state>
</option>
<option>
<name>OCDownloadExtraImage</name>
<state>1</state>
</option>
<option>
<name>OCAttachSlave</name>
<state>0</state>
</option>
<option>
<name>MassEraseBeforeFlashing</name>
<state>0</state>
</option>
<option>
<name>OCMulticoreNrOfCoresSlave</name>
<state>1</state>
</option>
<option>
<name>OCMulticoreAMPConfigType</name>
<state>0</state>
</option>
<option>
<name>OCMulticoreSessionFile</name>
<state></state>
</option>
<option>
<name>OCTpiuBaseOption</name>
<state>1</state>
</option>
</data>
</settings>
<settings>
<name>ARMSIM_ID</name>
<archiveVersion>2</archiveVersion>
<data>
<version>1</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>OCSimDriverInfo</name>
<state>1</state>
</option>
<option>
<name>OCSimEnablePSP</name>
<state>0</state>
</option>
<option>
<name>OCSimPspOverrideConfig</name>
<state>0</state>
</option>
<option>
<name>OCSimPspConfigFile</name>
<state></state>
</option>
</data>
</settings>
<settings>
<name>CADI_ID</name>
<archiveVersion>2</archiveVersion>
<data>
<version>0</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>CCadiMemory</name>
<state>1</state>
</option>
<option>
<name>Fast Model</name>
<state></state>
</option>
<option>
<name>CCADILogFileCheck</name>
<state>0</state>
</option>
<option>
<name>CCADILogFileEditB</name>
<state>$PROJ_DIR$\cspycomm.log</state>
</option>
<option>
<name>OCDriverInfo</name>
<state>1</state>
</option>
</data>
</settings>
<settings>
<name>CMSISDAP_ID</name>
<archiveVersion>2</archiveVersion>
<data>
<version>4</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>OCDriverInfo</name>
<state>1</state>
</option>
<option>
<name>OCIarProbeScriptFile</name>
<state>1</state>
</option>
<option>
<name>CMSISDAPResetList</name>
<version>1</version>
<state>10</state>
</option>
<option>
<name>CMSISDAPHWResetDuration</name>
<state>300</state>
</option>
<option>
<name>CMSISDAPHWResetDelay</name>
<state>200</state>
</option>
<option>
<name>CMSISDAPDoLogfile</name>
<state>0</state>
</option>
<option>
<name>CMSISDAPLogFile</name>
<state>$PROJ_DIR$\cspycomm.log</state>
</option>
<option>
<name>CMSISDAPInterfaceRadio</name>
<state>1</state>
</option>
<option>
<name>CMSISDAPInterfaceCmdLine</name>
<state>0</state>
</option>
<option>
<name>CMSISDAPMultiTargetEnable</name>
<state>0</state>
</option>
<option>
<name>CMSISDAPMultiTarget</name>
<state>0</state>
</option>
<option>
<name>CMSISDAPJtagSpeedList</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CMSISDAPBreakpointRadio</name>
<state>0</state>
</option>
<option>
<name>CMSISDAPRestoreBreakpointsCheck</name>
<state>0</state>
</option>
<option>
<name>CMSISDAPUpdateBreakpointsEdit</name>
<state>_call_main</state>
</option>
<option>
<name>RDICatchReset</name>
<state>0</state>
</option>
<option>
<name>RDICatchUndef</name>
<state>1</state>
</option>
<option>
<name>RDICatchSWI</name>
<state>0</state>
</option>
<option>
<name>RDICatchData</name>
<state>1</state>
</option>
<option>
<name>RDICatchPrefetch</name>
<state>1</state>
</option>
<option>
<name>RDICatchIRQ</name>
<state>0</state>
</option>
<option>
<name>RDICatchFIQ</name>
<state>0</state>
</option>
<option>
<name>CatchCORERESET</name>
<state>0</state>
</option>
<option>
<name>CatchMMERR</name>
<state>1</state>
</option>
<option>
<name>CatchNOCPERR</name>
<state>1</state>
</option>
<option>
<name>CatchCHKERR</name>
<state>1</state>
</option>
<option>
<name>CatchSTATERR</name>
<state>1</state>
</option>
<option>
<name>CatchBUSERR</name>
<state>1</state>
</option>
<option>
<name>CatchINTERR</name>
<state>1</state>
</option>
<option>
<name>CatchSFERR</name>
<state>1</state>
</option>
<option>
<name>CatchHARDERR</name>
<state>1</state>
</option>
<option>
<name>CatchDummy</name>
<state>0</state>
</option>
<option>
<name>CMSISDAPMultiCPUEnable</name>
<state>0</state>
</option>
<option>
<name>CMSISDAPMultiCPUNumber</name>
<state>0</state>
</option>
<option>
<name>OCProbeCfgOverride</name>
<state>0</state>
</option>
<option>
<name>OCProbeConfig</name>
<state></state>
</option>
<option>
<name>CMSISDAPProbeConfigRadio</name>
<state>0</state>
</option>
<option>
<name>CMSISDAPSelectedCPUBehaviour</name>
<state>0</state>
</option>
<option>
<name>ICpuName</name>
<state></state>
</option>
<option>
<name>OCJetEmuParams</name>
<state>1</state>
</option>
<option>
<name>CCCMSISDAPUsbSerialNo</name>
<state></state>
</option>
<option>
<name>CCCMSISDAPUsbSerialNoSelect</name>
<state>0</state>
</option>
</data>
</settings>
<settings>
<name>GDBSERVER_ID</name>
<archiveVersion>2</archiveVersion>
<data>
<version>0</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>OCDriverInfo</name>
<state>1</state>
</option>
<option>
<name>TCPIP</name>
<state>aaa.bbb.ccc.ddd</state>
</option>
<option>
<name>DoLogfile</name>
<state>0</state>
</option>
<option>
<name>LogFile</name>
<state>$PROJ_DIR$\cspycomm.log</state>
</option>
<option>
<name>CCJTagBreakpointRadio</name>
<state>0</state>
</option>
<option>
<name>CCJTagDoUpdateBreakpoints</name>
<state>0</state>
</option>
<option>
<name>CCJTagUpdateBreakpoints</name>
<state>_call_main</state>
</option>
</data>
</settings>
<settings>
<name>IJET_ID</name>
<archiveVersion>2</archiveVersion>
<data>
<version>9</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>OCDriverInfo</name>
<state>1</state>
</option>
<option>
<name>OCIarProbeScriptFile</name>
<state>1</state>
</option>
<option>
<name>IjetResetList</name>
<version>1</version>
<state>10</state>
</option>
<option>
<name>IjetHWResetDuration</name>
<state>300</state>
</option>
<option>
<name>IjetHWResetDelay</name>
<state>200</state>
</option>
<option>
<name>IjetPowerFromProbe</name>
<state>1</state>
</option>
<option>
<name>IjetPowerRadio</name>
<state>0</state>
</option>
<option>
<name>IjetDoLogfile</name>
<state>0</state>
</option>
<option>
<name>IjetLogFile</name>
<state>$PROJ_DIR$\cspycomm.log</state>
</option>
<option>
<name>IjetInterfaceRadio</name>
<state>1</state>
</option>
<option>
<name>IjetInterfaceCmdLine</name>
<state>0</state>
</option>
<option>
<name>IjetMultiTargetEnable</name>
<state>0</state>
</option>
<option>
<name>IjetMultiTarget</name>
<state>0</state>
</option>
<option>
<name>IjetScanChainNonARMDevices</name>
<state>0</state>
</option>
<option>
<name>IjetIRLength</name>
<state>0</state>
</option>
<option>
<name>IjetJtagSpeedList</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>IjetProtocolRadio</name>
<state>0</state>
</option>
<option>
<name>IjetSwoPin</name>
<state>0</state>
</option>
<option>
<name>IjetCpuClockEdit</name>
<state></state>
</option>
<option>
<name>IjetSwoPrescalerList</name>
<version>1</version>
<state>0</state>
</option>
<option>
<name>IjetBreakpointRadio</name>
<state>0</state>
</option>
<option>
<name>IjetRestoreBreakpointsCheck</name>
<state>0</state>
</option>
<option>
<name>IjetUpdateBreakpointsEdit</name>
<state>_call_main</state>
</option>
<option>
<name>RDICatchReset</name>
<state>0</state>
</option>
<option>
<name>RDICatchUndef</name>
<state>1</state>
</option>
<option>
<name>RDICatchSWI</name>
<state>0</state>
</option>
<option>
<name>RDICatchData</name>
<state>1</state>
</option>
<option>
<name>RDICatchPrefetch</name>
<state>1</state>
</option>
<option>
<name>RDICatchIRQ</name>
<state>0</state>
</option>
<option>
<name>RDICatchFIQ</name>
<state>0</state>
</option>
<option>
<name>CatchCORERESET</name>
<state>0</state>
</option>
<option>
<name>CatchMMERR</name>
<state>1</state>
</option>
<option>
<name>CatchNOCPERR</name>
<state>1</state>
</option>
<option>
<name>CatchCHKERR</name>
<state>1</state>
</option>
<option>
<name>CatchSTATERR</name>
<state>1</state>
</option>
<option>
<name>CatchBUSERR</name>
<state>1</state>
</option>
<option>
<name>CatchINTERR</name>
<state>1</state>
</option>
<option>
<name>CatchSFERR</name>
<state>1</state>
</option>
<option>
<name>CatchHARDERR</name>
<state>1</state>
</option>
<option>
<name>CatchDummy</name>
<state>0</state>
</option>
<option>
<name>OCProbeCfgOverride</name>
<state>0</state>
</option>
<option>
<name>OCProbeConfig</name>
<state></state>
</option>
<option>
<name>IjetProbeConfigRadio</name>
<state>0</state>
</option>
<option>
<name>IjetMultiCPUEnable</name>
<state>0</state>
</option>
<option>
<name>IjetMultiCPUNumber</name>
<state>0</state>
</option>
<option>
<name>IjetSelectedCPUBehaviour</name>
<state>0</state>
</option>
<option>
<name>ICpuName</name>
<state></state>
</option>
<option>
<name>OCJetEmuParams</name>
<state>1</state>
</option>
<option>
<name>IjetPreferETB</name>
<state>1</state>
</option>
<option>
<name>IjetTraceSettingsList</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>IjetTraceSizeList</name>
<version>0</version>
<state>4</state>
</option>
<option>
<name>FlashBoardPathSlave</name>
<state>0</state>
</option>
<option>
<name>CCIjetUsbSerialNo</name>
<state></state>
</option>
<option>
<name>CCIjetUsbSerialNoSelect</name>
<state>0</state>
</option>
<option>
<name>CatchV8ARReset</name>
<state>0</state>
</option>
<option>
<name>CatchV8AREREL1NS</name>
<state>0</state>
</option>
<option>
<name>CatchV8AREREL1S</name>
<state>0</state>
</option>
<option>
<name>CatchV8AREREL2NS</name>
<state>0</state>
</option>
<option>
<name>CatchV8AREREL3S</name>
<state>0</state>
</option>
<option>
<name>CatchV8AREEL1NS</name>
<state>0</state>
</option>
<option>
<name>CatchV8ARREL1NS</name>
<state>0</state>
</option>
<option>
<name>CatchV8AREEL1S</name>
<state>0</state>
</option>
<option>
<name>CatchV8ARREL1S</name>
<state>0</state>
</option>
<option>
<name>CatchV8AREEL2NS</name>
<state>0</state>
</option>
<option>
<name>CatchV8ARREL2NS</name>
<state>0</state>
</option>
<option>
<name>CatchV8AREEL3S</name>
<state>0</state>
</option>
<option>
<name>CatchV8ARREL3S</name>
<state>0</state>
</option>
</data>
</settings>
<settings>
<name>JLINK_ID</name>
<archiveVersion>2</archiveVersion>
<data>
<version>16</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>JLinkSpeed</name>
<state>1000</state>
</option>
<option>
<name>CCJLinkDoLogfile</name>
<state>0</state>
</option>
<option>
<name>CCJLinkLogFile</name>
<state>$PROJ_DIR$\cspycomm.log</state>
</option>
<option>
<name>CCJLinkHWResetDelay</name>
<state>0</state>
</option>
<option>
<name>OCDriverInfo</name>
<state>1</state>
</option>
<option>
<name>JLinkInitialSpeed</name>
<state>1000</state>
</option>
<option>
<name>CCDoJlinkMultiTarget</name>
<state>0</state>
</option>
<option>
<name>CCScanChainNonARMDevices</name>
<state>0</state>
</option>
<option>
<name>CCJLinkMultiTarget</name>
<state>0</state>
</option>
<option>
<name>CCJLinkIRLength</name>
<state>0</state>
</option>
<option>
<name>CCJLinkCommRadio</name>
<state>0</state>
</option>
<option>
<name>CCJLinkTCPIP</name>
<state>aaa.bbb.ccc.ddd</state>
</option>
<option>
<name>CCJLinkSpeedRadioV2</name>
<state>0</state>
</option>
<option>
<name>CCUSBDevice</name>
<version>1</version>
<state>1</state>
</option>
<option>
<name>CCRDICatchReset</name>
<state>0</state>
</option>
<option>
<name>CCRDICatchUndef</name>
<state>0</state>
</option>
<option>
<name>CCRDICatchSWI</name>
<state>0</state>
</option>
<option>
<name>CCRDICatchData</name>
<state>0</state>
</option>
<option>
<name>CCRDICatchPrefetch</name>
<state>0</state>
</option>
<option>
<name>CCRDICatchIRQ</name>
<state>0</state>
</option>
<option>
<name>CCRDICatchFIQ</name>
<state>0</state>
</option>
<option>
<name>CCJLinkBreakpointRadio</name>
<state>0</state>
</option>
<option>
<name>CCJLinkDoUpdateBreakpoints</name>
<state>0</state>
</option>
<option>
<name>CCJLinkUpdateBreakpoints</name>
<state>_call_main</state>
</option>
<option>
<name>CCJLinkInterfaceRadio</name>
<state>1</state>
</option>
<option>
<name>CCJLinkResetList</name>
<version>6</version>
<state>5</state>
</option>
<option>
<name>CCJLinkInterfaceCmdLine</name>
<state>0</state>
</option>
<option>
<name>CCCatchCORERESET</name>
<state>0</state>
</option>
<option>
<name>CCCatchMMERR</name>
<state>0</state>
</option>
<option>
<name>CCCatchNOCPERR</name>
<state>0</state>
</option>
<option>
<name>CCCatchCHRERR</name>
<state>0</state>
</option>
<option>
<name>CCCatchSTATERR</name>
<state>0</state>
</option>
<option>
<name>CCCatchBUSERR</name>
<state>0</state>
</option>
<option>
<name>CCCatchINTERR</name>
<state>0</state>
</option>
<option>
<name>CCCatchSFERR</name>
<state>0</state>
</option>
<option>
<name>CCCatchHARDERR</name>
<state>0</state>
</option>
<option>
<name>CCCatchDummy</name>
<state>0</state>
</option>
<option>
<name>OCJLinkScriptFile</name>
<state>1</state>
</option>
<option>
<name>CCJLinkUsbSerialNo</name>
<state></state>
</option>
<option>
<name>CCTcpIpAlt</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CCJLinkTcpIpSerialNo</name>
<state></state>
</option>
<option>
<name>CCCpuClockEdit</name>
<state></state>
</option>
<option>
<name>CCSwoClockAuto</name>
<state>0</state>
</option>
<option>
<name>CCSwoClockEdit</name>
<state>2000</state>
</option>
<option>
<name>OCJLinkTraceSource</name>
<state>0</state>
</option>
<option>
<name>OCJLinkTraceSourceDummy</name>
<state>0</state>
</option>
<option>
<name>OCJLinkDeviceName</name>
<state>1</state>
</option>
</data>
</settings>
<settings>
<name>LMIFTDI_ID</name>
<archiveVersion>2</archiveVersion>
<data>
<version>3</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>OCDriverInfo</name>
<state>1</state>
</option>
<option>
<name>LmiftdiSpeed</name>
<state>500</state>
</option>
<option>
<name>CCLmiftdiDoLogfile</name>
<state>0</state>
</option>
<option>
<name>CCLmiftdiLogFile</name>
<state>$PROJ_DIR$\cspycomm.log</state>
</option>
<option>
<name>CCLmiFtdiInterfaceRadio</name>
<state>1</state>
</option>
<option>
<name>CCLmiFtdiInterfaceCmdLine</name>
<state>0</state>
</option>
<option>
<name>CCLmiftdiUsbSerialNo</name>
<state></state>
</option>
<option>
<name>CCLmiftdiUsbSerialNoSelect</name>
<state>0</state>
</option>
<option>
<name>CCLmiftdiResetList</name>
<version>0</version>
<state>0</state>
</option>
</data>
</settings>
<settings>
<name>NULINK_ID</name>
<archiveVersion>2</archiveVersion>
<data>
<version>0</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>OCDriverInfo</name>
<state>1</state>
</option>
<option>
<name>DoLogfile</name>
<state>0</state>
</option>
<option>
<name>LogFile</name>
<state>$PROJ_DIR$\cspycomm.log</state>
</option>
</data>
</settings>
<settings>
<name>PEMICRO_ID</name>
<archiveVersion>2</archiveVersion>
<data>
<version>3</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>OCDriverInfo</name>
<state>1</state>
</option>
<option>
<name>CCJPEMicroShowSettings</name>
<state>0</state>
</option>
<option>
<name>DoLogfile</name>
<state>0</state>
</option>
<option>
<name>LogFile</name>
<state>$PROJ_DIR$\cspycomm.log</state>
</option>
</data>
</settings>
<settings>
<name>STLINK_ID</name>
<archiveVersion>2</archiveVersion>
<data>
<version>7</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>OCDriverInfo</name>
<state>1</state>
</option>
<option>
<name>CCSTLinkInterfaceRadio</name>
<state>1</state>
</option>
<option>
<name>CCSTLinkInterfaceCmdLine</name>
<state>0</state>
</option>
<option>
<name>CCSTLinkResetList</name>
<version>3</version>
<state>0</state>
</option>
<option>
<name>CCCpuClockEdit</name>
<state></state>
</option>
<option>
<name>CCSwoClockAuto</name>
<state>1</state>
</option>
<option>
<name>CCSwoClockEdit</name>
<state>2000</state>
</option>
<option>
<name>DoLogfile</name>
<state>0</state>
</option>
<option>
<name>LogFile</name>
<state>$PROJ_DIR$\cspycomm.log</state>
</option>
<option>
<name>CCSTLinkDoUpdateBreakpoints</name>
<state>0</state>
</option>
<option>
<name>CCSTLinkUpdateBreakpoints</name>
<state>_call_main</state>
</option>
<option>
<name>CCSTLinkCatchCORERESET</name>
<state>0</state>
</option>
<option>
<name>CCSTLinkCatchMMERR</name>
<state>0</state>
</option>
<option>
<name>CCSTLinkCatchNOCPERR</name>
<state>0</state>
</option>
<option>
<name>CCSTLinkCatchCHRERR</name>
<state>0</state>
</option>
<option>
<name>CCSTLinkCatchSTATERR</name>
<state>0</state>
</option>
<option>
<name>CCSTLinkCatchBUSERR</name>
<state>0</state>
</option>
<option>
<name>CCSTLinkCatchINTERR</name>
<state>0</state>
</option>
<option>
<name>CCSTLinkCatchSFERR</name>
<state>0</state>
</option>
<option>
<name>CCSTLinkCatchHARDERR</name>
<state>0</state>
</option>
<option>
<name>CCSTLinkCatchDummy</name>
<state>0</state>
</option>
<option>
<name>CCSTLinkUsbSerialNo</name>
<state></state>
</option>
<option>
<name>CCSTLinkUsbSerialNoSelect</name>
<state>0</state>
</option>
<option>
<name>CCSTLinkJtagSpeedList</name>
<version>2</version>
<state>0</state>
</option>
<option>
<name>CCSTLinkDAPNumber</name>
<state></state>
</option>
<option>
<name>CCSTLinkDebugAccessPortRadio</name>
<state>0</state>
</option>
<option>
<name>CCSTLinkUseServerSelect</name>
<state>0</state>
</option>
<option>
<name>CCSTLinkProbeList</name>
<version>1</version>
<state>0</state>
</option>
</data>
</settings>
<settings>
<name>THIRDPARTY_ID</name>
<archiveVersion>2</archiveVersion>
<data>
<version>0</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>CThirdPartyDriverDll</name>
<state>###Uninitialized###</state>
</option>
<option>
<name>CThirdPartyLogFileCheck</name>
<state>0</state>
</option>
<option>
<name>CThirdPartyLogFileEditB</name>
<state>$PROJ_DIR$\cspycomm.log</state>
</option>
<option>
<name>OCDriverInfo</name>
<state>1</state>
</option>
</data>
</settings>
<settings>
<name>TIFET_ID</name>
<archiveVersion>2</archiveVersion>
<data>
<version>1</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>OCDriverInfo</name>
<state>1</state>
</option>
<option>
<name>CCMSPFetResetList</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CCMSPFetInterfaceRadio</name>
<state>0</state>
</option>
<option>
<name>CCMSPFetInterfaceCmdLine</name>
<state>0</state>
</option>
<option>
<name>CCMSPFetTargetVccTypeDefault</name>
<state>0</state>
</option>
<option>
<name>CCMSPFetTargetVoltage</name>
<state>###Uninitialized###</state>
</option>
<option>
<name>CCMSPFetVCCDefault</name>
<state>1</state>
</option>
<option>
<name>CCMSPFetTargetSettlingtime</name>
<state>0</state>
</option>
<option>
<name>CCMSPFetRadioJtagSpeedType</name>
<state>1</state>
</option>
<option>
<name>CCMSPFetConnection</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CCMSPFetUsbComPort</name>
<state>Automatic</state>
</option>
<option>
<name>CCMSPFetAllowAccessToBSL</name>
<state>0</state>
</option>
<option>
<name>CCMSPFetDoLogfile</name>
<state>0</state>
</option>
<option>
<name>CCMSPFetLogFile</name>
<state>$PROJ_DIR$\cspycomm.log</state>
</option>
<option>
<name>CCMSPFetRadioEraseFlash</name>
<state>1</state>
</option>
</data>
</settings>
<settings>
<name>XDS100_ID</name>
<archiveVersion>2</archiveVersion>
<data>
<version>8</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>OCDriverInfo</name>
<state>1</state>
</option>
<option>
<name>TIPackageOverride</name>
<state>0</state>
</option>
<option>
<name>TIPackage</name>
<state></state>
</option>
<option>
<name>BoardFile</name>
<state></state>
</option>
<option>
<name>DoLogfile</name>
<state>0</state>
</option>
<option>
<name>LogFile</name>
<state>$PROJ_DIR$\cspycomm.log</state>
</option>
<option>
<name>CCXds100BreakpointRadio</name>
<state>0</state>
</option>
<option>
<name>CCXds100DoUpdateBreakpoints</name>
<state>0</state>
</option>
<option>
<name>CCXds100UpdateBreakpoints</name>
<state>_call_main</state>
</option>
<option>
<name>CCXds100CatchReset</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchUndef</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchSWI</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchData</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchPrefetch</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchIRQ</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchFIQ</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchCORERESET</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchMMERR</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchNOCPERR</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchCHRERR</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchSTATERR</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchBUSERR</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchINTERR</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchSFERR</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchHARDERR</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchDummy</name>
<state>0</state>
</option>
<option>
<name>CCXds100CpuClockEdit</name>
<state></state>
</option>
<option>
<name>CCXds100SwoClockAuto</name>
<state>0</state>
</option>
<option>
<name>CCXds100SwoClockEdit</name>
<state>1000</state>
</option>
<option>
<name>CCXds100HWResetDelay</name>
<state>0</state>
</option>
<option>
<name>CCXds100ResetList</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CCXds100UsbSerialNo</name>
<state></state>
</option>
<option>
<name>CCXds100UsbSerialNoSelect</name>
<state>0</state>
</option>
<option>
<name>CCXds100JtagSpeedList</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CCXds100InterfaceRadio</name>
<state>2</state>
</option>
<option>
<name>CCXds100InterfaceCmdLine</name>
<state>0</state>
</option>
<option>
<name>CCXds100ProbeList</name>
<version>0</version>
<state>3</state>
</option>
<option>
<name>CCXds100SWOPortRadio</name>
<state>0</state>
</option>
<option>
<name>CCXds100SWOPort</name>
<state>1</state>
</option>
<option>
<name>CCXDSTargetVccEnable</name>
<state>0</state>
</option>
<option>
<name>CCXDSTargetVoltage</name>
<state>###Uninitialized###</state>
</option>
<option>
<name>OCXDSDigitalStatesConfigFile</name>
<state>1</state>
</option>
</data>
</settings>
<debuggerPlugins>
<plugin>
<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
<loadFlag>0</loadFlag>
</plugin>
<plugin>
<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
<loadFlag>0</loadFlag>
</plugin>
<plugin>
<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
<loadFlag>0</loadFlag>
</plugin>
<plugin>
<file>$TOOLKIT_DIR$\plugins\rtos\FreeRtos\FreeRtosArmPlugin.ENU.ewplugin</file>
<loadFlag>0</loadFlag>
</plugin>
<plugin>
<file>$TOOLKIT_DIR$\plugins\rtos\Mbed\MbedArmPlugin.ENU.ewplugin</file>
<loadFlag>0</loadFlag>
</plugin>
<plugin>
<file>$TOOLKIT_DIR$\plugins\rtos\Mbed\MbedArmPlugin2.ENU.ewplugin</file>
<loadFlag>0</loadFlag>
</plugin>
<plugin>
<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
<loadFlag>0</loadFlag>
</plugin>
<plugin>
<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
<loadFlag>0</loadFlag>
</plugin>
<plugin>
<file>$TOOLKIT_DIR$\plugins\rtos\SMX\smxAwareIarArm9.ewplugin</file>
<loadFlag>0</loadFlag>
</plugin>
<plugin>
<file>$TOOLKIT_DIR$\plugins\rtos\SMX\smxAwareIarArm9BE.ewplugin</file>
<loadFlag>0</loadFlag>
</plugin>
<plugin>
<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
<loadFlag>0</loadFlag>
</plugin>
<plugin>
<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
<loadFlag>0</loadFlag>
</plugin>
<plugin>
<file>$EW_DIR$\common\plugins\TargetAccessServer\TargetAccessServer.ENU.ewplugin</file>
<loadFlag>0</loadFlag>
</plugin>
<plugin>
<file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
<loadFlag>0</loadFlag>
</plugin>
</debuggerPlugins>
</configuration>
<configuration>
<name>Release</name>
<toolchain>
<name>ARM</name>
</toolchain>
<debug>0</debug>
<settings>
<name>C-SPY</name>
<archiveVersion>2</archiveVersion>
<data>
<version>32</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>CInput</name>
<state>1</state>
</option>
<option>
<name>CEndian</name>
<state>1</state>
</option>
<option>
<name>CProcessor</name>
<state>1</state>
</option>
<option>
<name>OCVariant</name>
<state>0</state>
</option>
<option>
<name>MacOverride</name>
<state>0</state>
</option>
<option>
<name>MacFile</name>
<state></state>
</option>
<option>
<name>MemOverride</name>
<state>0</state>
</option>
<option>
<name>MemFile</name>
<state></state>
</option>
<option>
<name>RunToEnable</name>
<state>1</state>
</option>
<option>
<name>RunToName</name>
<state>main</state>
</option>
<option>
<name>CExtraOptionsCheck</name>
<state>0</state>
</option>
<option>
<name>CExtraOptions</name>
<state></state>
</option>
<option>
<name>CFpuProcessor</name>
<state>1</state>
</option>
<option>
<name>OCDDFArgumentProducer</name>
<state></state>
</option>
<option>
<name>OCDownloadSuppressDownload</name>
<state>0</state>
</option>
<option>
<name>OCDownloadVerifyAll</name>
<state>0</state>
</option>
<option>
<name>OCProductVersion</name>
<state>9.10.2.39304</state>
</option>
<option>
<name>OCDynDriverList</name>
<state>ARMSIM_ID</state>
</option>
<option>
<name>OCLastSavedByProductVersion</name>
<state></state>
</option>
<option>
<name>UseFlashLoader</name>
<state>1</state>
</option>
<option>
<name>CLowLevel</name>
<state>1</state>
</option>
<option>
<name>OCBE8Slave</name>
<state>1</state>
</option>
<option>
<name>MacFile2</name>
<state></state>
</option>
<option>
<name>CDevice</name>
<state>1</state>
</option>
<option>
<name>FlashLoadersV3</name>
<state></state>
</option>
<option>
<name>OCImagesSuppressCheck1</name>
<state>0</state>
</option>
<option>
<name>OCImagesPath1</name>
<state></state>
</option>
<option>
<name>OCImagesSuppressCheck2</name>
<state>0</state>
</option>
<option>
<name>OCImagesPath2</name>
<state></state>
</option>
<option>
<name>OCImagesSuppressCheck3</name>
<state>0</state>
</option>
<option>
<name>OCImagesPath3</name>
<state></state>
</option>
<option>
<name>OverrideDefFlashBoard</name>
<state>0</state>
</option>
<option>
<name>OCImagesOffset1</name>
<state></state>
</option>
<option>
<name>OCImagesOffset2</name>
<state></state>
</option>
<option>
<name>OCImagesOffset3</name>
<state></state>
</option>
<option>
<name>OCImagesUse1</name>
<state>0</state>
</option>
<option>
<name>OCImagesUse2</name>
<state>0</state>
</option>
<option>
<name>OCImagesUse3</name>
<state>0</state>
</option>
<option>
<name>OCDeviceConfigMacroFile</name>
<state>1</state>
</option>
<option>
<name>OCDebuggerExtraOption</name>
<state>1</state>
</option>
<option>
<name>OCAllMTBOptions</name>
<state>1</state>
</option>
<option>
<name>OCMulticoreNrOfCores</name>
<state></state>
</option>
<option>
<name>OCMulticoreWorkspace</name>
<state></state>
</option>
<option>
<name>OCMulticoreSlaveProject</name>
<state></state>
</option>
<option>
<name>OCMulticoreSlaveConfiguration</name>
<state></state>
</option>
<option>
<name>OCDownloadExtraImage</name>
<state>1</state>
</option>
<option>
<name>OCAttachSlave</name>
<state>0</state>
</option>
<option>
<name>MassEraseBeforeFlashing</name>
<state>0</state>
</option>
<option>
<name>OCMulticoreNrOfCoresSlave</name>
<state>1</state>
</option>
<option>
<name>OCMulticoreAMPConfigType</name>
<state>0</state>
</option>
<option>
<name>OCMulticoreSessionFile</name>
<state></state>
</option>
<option>
<name>OCTpiuBaseOption</name>
<state>1</state>
</option>
</data>
</settings>
<settings>
<name>ARMSIM_ID</name>
<archiveVersion>2</archiveVersion>
<data>
<version>1</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>OCSimDriverInfo</name>
<state>1</state>
</option>
<option>
<name>OCSimEnablePSP</name>
<state>0</state>
</option>
<option>
<name>OCSimPspOverrideConfig</name>
<state>0</state>
</option>
<option>
<name>OCSimPspConfigFile</name>
<state></state>
</option>
</data>
</settings>
<settings>
<name>CADI_ID</name>
<archiveVersion>2</archiveVersion>
<data>
<version>0</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>CCadiMemory</name>
<state>1</state>
</option>
<option>
<name>Fast Model</name>
<state></state>
</option>
<option>
<name>CCADILogFileCheck</name>
<state>0</state>
</option>
<option>
<name>CCADILogFileEditB</name>
<state>$PROJ_DIR$\cspycomm.log</state>
</option>
<option>
<name>OCDriverInfo</name>
<state>1</state>
</option>
</data>
</settings>
<settings>
<name>CMSISDAP_ID</name>
<archiveVersion>2</archiveVersion>
<data>
<version>4</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>OCDriverInfo</name>
<state>1</state>
</option>
<option>
<name>OCIarProbeScriptFile</name>
<state>1</state>
</option>
<option>
<name>CMSISDAPResetList</name>
<version>1</version>
<state>10</state>
</option>
<option>
<name>CMSISDAPHWResetDuration</name>
<state>300</state>
</option>
<option>
<name>CMSISDAPHWResetDelay</name>
<state>200</state>
</option>
<option>
<name>CMSISDAPDoLogfile</name>
<state>0</state>
</option>
<option>
<name>CMSISDAPLogFile</name>
<state>$PROJ_DIR$\cspycomm.log</state>
</option>
<option>
<name>CMSISDAPInterfaceRadio</name>
<state>1</state>
</option>
<option>
<name>CMSISDAPInterfaceCmdLine</name>
<state>0</state>
</option>
<option>
<name>CMSISDAPMultiTargetEnable</name>
<state>0</state>
</option>
<option>
<name>CMSISDAPMultiTarget</name>
<state>0</state>
</option>
<option>
<name>CMSISDAPJtagSpeedList</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CMSISDAPBreakpointRadio</name>
<state>0</state>
</option>
<option>
<name>CMSISDAPRestoreBreakpointsCheck</name>
<state>0</state>
</option>
<option>
<name>CMSISDAPUpdateBreakpointsEdit</name>
<state>_call_main</state>
</option>
<option>
<name>RDICatchReset</name>
<state>0</state>
</option>
<option>
<name>RDICatchUndef</name>
<state>1</state>
</option>
<option>
<name>RDICatchSWI</name>
<state>0</state>
</option>
<option>
<name>RDICatchData</name>
<state>1</state>
</option>
<option>
<name>RDICatchPrefetch</name>
<state>1</state>
</option>
<option>
<name>RDICatchIRQ</name>
<state>0</state>
</option>
<option>
<name>RDICatchFIQ</name>
<state>0</state>
</option>
<option>
<name>CatchCORERESET</name>
<state>0</state>
</option>
<option>
<name>CatchMMERR</name>
<state>1</state>
</option>
<option>
<name>CatchNOCPERR</name>
<state>1</state>
</option>
<option>
<name>CatchCHKERR</name>
<state>1</state>
</option>
<option>
<name>CatchSTATERR</name>
<state>1</state>
</option>
<option>
<name>CatchBUSERR</name>
<state>1</state>
</option>
<option>
<name>CatchINTERR</name>
<state>1</state>
</option>
<option>
<name>CatchSFERR</name>
<state>1</state>
</option>
<option>
<name>CatchHARDERR</name>
<state>1</state>
</option>
<option>
<name>CatchDummy</name>
<state>0</state>
</option>
<option>
<name>CMSISDAPMultiCPUEnable</name>
<state>0</state>
</option>
<option>
<name>CMSISDAPMultiCPUNumber</name>
<state>0</state>
</option>
<option>
<name>OCProbeCfgOverride</name>
<state>0</state>
</option>
<option>
<name>OCProbeConfig</name>
<state></state>
</option>
<option>
<name>CMSISDAPProbeConfigRadio</name>
<state>0</state>
</option>
<option>
<name>CMSISDAPSelectedCPUBehaviour</name>
<state>0</state>
</option>
<option>
<name>ICpuName</name>
<state></state>
</option>
<option>
<name>OCJetEmuParams</name>
<state>1</state>
</option>
<option>
<name>CCCMSISDAPUsbSerialNo</name>
<state></state>
</option>
<option>
<name>CCCMSISDAPUsbSerialNoSelect</name>
<state>0</state>
</option>
</data>
</settings>
<settings>
<name>GDBSERVER_ID</name>
<archiveVersion>2</archiveVersion>
<data>
<version>0</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>OCDriverInfo</name>
<state>1</state>
</option>
<option>
<name>TCPIP</name>
<state>aaa.bbb.ccc.ddd</state>
</option>
<option>
<name>DoLogfile</name>
<state>0</state>
</option>
<option>
<name>LogFile</name>
<state>$PROJ_DIR$\cspycomm.log</state>
</option>
<option>
<name>CCJTagBreakpointRadio</name>
<state>0</state>
</option>
<option>
<name>CCJTagDoUpdateBreakpoints</name>
<state>0</state>
</option>
<option>
<name>CCJTagUpdateBreakpoints</name>
<state>_call_main</state>
</option>
</data>
</settings>
<settings>
<name>IJET_ID</name>
<archiveVersion>2</archiveVersion>
<data>
<version>9</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>OCDriverInfo</name>
<state>1</state>
</option>
<option>
<name>OCIarProbeScriptFile</name>
<state>1</state>
</option>
<option>
<name>IjetResetList</name>
<version>1</version>
<state>10</state>
</option>
<option>
<name>IjetHWResetDuration</name>
<state>300</state>
</option>
<option>
<name>IjetHWResetDelay</name>
<state>200</state>
</option>
<option>
<name>IjetPowerFromProbe</name>
<state>1</state>
</option>
<option>
<name>IjetPowerRadio</name>
<state>0</state>
</option>
<option>
<name>IjetDoLogfile</name>
<state>0</state>
</option>
<option>
<name>IjetLogFile</name>
<state>$PROJ_DIR$\cspycomm.log</state>
</option>
<option>
<name>IjetInterfaceRadio</name>
<state>1</state>
</option>
<option>
<name>IjetInterfaceCmdLine</name>
<state>0</state>
</option>
<option>
<name>IjetMultiTargetEnable</name>
<state>0</state>
</option>
<option>
<name>IjetMultiTarget</name>
<state>0</state>
</option>
<option>
<name>IjetScanChainNonARMDevices</name>
<state>0</state>
</option>
<option>
<name>IjetIRLength</name>
<state>0</state>
</option>
<option>
<name>IjetJtagSpeedList</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>IjetProtocolRadio</name>
<state>0</state>
</option>
<option>
<name>IjetSwoPin</name>
<state>0</state>
</option>
<option>
<name>IjetCpuClockEdit</name>
<state></state>
</option>
<option>
<name>IjetSwoPrescalerList</name>
<version>1</version>
<state>0</state>
</option>
<option>
<name>IjetBreakpointRadio</name>
<state>0</state>
</option>
<option>
<name>IjetRestoreBreakpointsCheck</name>
<state>0</state>
</option>
<option>
<name>IjetUpdateBreakpointsEdit</name>
<state>_call_main</state>
</option>
<option>
<name>RDICatchReset</name>
<state>0</state>
</option>
<option>
<name>RDICatchUndef</name>
<state>1</state>
</option>
<option>
<name>RDICatchSWI</name>
<state>0</state>
</option>
<option>
<name>RDICatchData</name>
<state>1</state>
</option>
<option>
<name>RDICatchPrefetch</name>
<state>1</state>
</option>
<option>
<name>RDICatchIRQ</name>
<state>0</state>
</option>
<option>
<name>RDICatchFIQ</name>
<state>0</state>
</option>
<option>
<name>CatchCORERESET</name>
<state>0</state>
</option>
<option>
<name>CatchMMERR</name>
<state>1</state>
</option>
<option>
<name>CatchNOCPERR</name>
<state>1</state>
</option>
<option>
<name>CatchCHKERR</name>
<state>1</state>
</option>
<option>
<name>CatchSTATERR</name>
<state>1</state>
</option>
<option>
<name>CatchBUSERR</name>
<state>1</state>
</option>
<option>
<name>CatchINTERR</name>
<state>1</state>
</option>
<option>
<name>CatchSFERR</name>
<state>1</state>
</option>
<option>
<name>CatchHARDERR</name>
<state>1</state>
</option>
<option>
<name>CatchDummy</name>
<state>0</state>
</option>
<option>
<name>OCProbeCfgOverride</name>
<state>0</state>
</option>
<option>
<name>OCProbeConfig</name>
<state></state>
</option>
<option>
<name>IjetProbeConfigRadio</name>
<state>0</state>
</option>
<option>
<name>IjetMultiCPUEnable</name>
<state>0</state>
</option>
<option>
<name>IjetMultiCPUNumber</name>
<state>0</state>
</option>
<option>
<name>IjetSelectedCPUBehaviour</name>
<state>0</state>
</option>
<option>
<name>ICpuName</name>
<state></state>
</option>
<option>
<name>OCJetEmuParams</name>
<state>1</state>
</option>
<option>
<name>IjetPreferETB</name>
<state>1</state>
</option>
<option>
<name>IjetTraceSettingsList</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>IjetTraceSizeList</name>
<version>0</version>
<state>4</state>
</option>
<option>
<name>FlashBoardPathSlave</name>
<state>0</state>
</option>
<option>
<name>CCIjetUsbSerialNo</name>
<state></state>
</option>
<option>
<name>CCIjetUsbSerialNoSelect</name>
<state>0</state>
</option>
<option>
<name>CatchV8ARReset</name>
<state>0</state>
</option>
<option>
<name>CatchV8AREREL1NS</name>
<state>0</state>
</option>
<option>
<name>CatchV8AREREL1S</name>
<state>0</state>
</option>
<option>
<name>CatchV8AREREL2NS</name>
<state>0</state>
</option>
<option>
<name>CatchV8AREREL3S</name>
<state>0</state>
</option>
<option>
<name>CatchV8AREEL1NS</name>
<state>0</state>
</option>
<option>
<name>CatchV8ARREL1NS</name>
<state>0</state>
</option>
<option>
<name>CatchV8AREEL1S</name>
<state>0</state>
</option>
<option>
<name>CatchV8ARREL1S</name>
<state>0</state>
</option>
<option>
<name>CatchV8AREEL2NS</name>
<state>0</state>
</option>
<option>
<name>CatchV8ARREL2NS</name>
<state>0</state>
</option>
<option>
<name>CatchV8AREEL3S</name>
<state>0</state>
</option>
<option>
<name>CatchV8ARREL3S</name>
<state>0</state>
</option>
</data>
</settings>
<settings>
<name>JLINK_ID</name>
<archiveVersion>2</archiveVersion>
<data>
<version>16</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>JLinkSpeed</name>
<state>1000</state>
</option>
<option>
<name>CCJLinkDoLogfile</name>
<state>0</state>
</option>
<option>
<name>CCJLinkLogFile</name>
<state>$PROJ_DIR$\cspycomm.log</state>
</option>
<option>
<name>CCJLinkHWResetDelay</name>
<state>0</state>
</option>
<option>
<name>OCDriverInfo</name>
<state>1</state>
</option>
<option>
<name>JLinkInitialSpeed</name>
<state>1000</state>
</option>
<option>
<name>CCDoJlinkMultiTarget</name>
<state>0</state>
</option>
<option>
<name>CCScanChainNonARMDevices</name>
<state>0</state>
</option>
<option>
<name>CCJLinkMultiTarget</name>
<state>0</state>
</option>
<option>
<name>CCJLinkIRLength</name>
<state>0</state>
</option>
<option>
<name>CCJLinkCommRadio</name>
<state>0</state>
</option>
<option>
<name>CCJLinkTCPIP</name>
<state>aaa.bbb.ccc.ddd</state>
</option>
<option>
<name>CCJLinkSpeedRadioV2</name>
<state>0</state>
</option>
<option>
<name>CCUSBDevice</name>
<version>1</version>
<state>1</state>
</option>
<option>
<name>CCRDICatchReset</name>
<state>0</state>
</option>
<option>
<name>CCRDICatchUndef</name>
<state>0</state>
</option>
<option>
<name>CCRDICatchSWI</name>
<state>0</state>
</option>
<option>
<name>CCRDICatchData</name>
<state>0</state>
</option>
<option>
<name>CCRDICatchPrefetch</name>
<state>0</state>
</option>
<option>
<name>CCRDICatchIRQ</name>
<state>0</state>
</option>
<option>
<name>CCRDICatchFIQ</name>
<state>0</state>
</option>
<option>
<name>CCJLinkBreakpointRadio</name>
<state>0</state>
</option>
<option>
<name>CCJLinkDoUpdateBreakpoints</name>
<state>0</state>
</option>
<option>
<name>CCJLinkUpdateBreakpoints</name>
<state>_call_main</state>
</option>
<option>
<name>CCJLinkInterfaceRadio</name>
<state>1</state>
</option>
<option>
<name>CCJLinkResetList</name>
<version>6</version>
<state>5</state>
</option>
<option>
<name>CCJLinkInterfaceCmdLine</name>
<state>0</state>
</option>
<option>
<name>CCCatchCORERESET</name>
<state>0</state>
</option>
<option>
<name>CCCatchMMERR</name>
<state>0</state>
</option>
<option>
<name>CCCatchNOCPERR</name>
<state>0</state>
</option>
<option>
<name>CCCatchCHRERR</name>
<state>0</state>
</option>
<option>
<name>CCCatchSTATERR</name>
<state>0</state>
</option>
<option>
<name>CCCatchBUSERR</name>
<state>0</state>
</option>
<option>
<name>CCCatchINTERR</name>
<state>0</state>
</option>
<option>
<name>CCCatchSFERR</name>
<state>0</state>
</option>
<option>
<name>CCCatchHARDERR</name>
<state>0</state>
</option>
<option>
<name>CCCatchDummy</name>
<state>0</state>
</option>
<option>
<name>OCJLinkScriptFile</name>
<state>1</state>
</option>
<option>
<name>CCJLinkUsbSerialNo</name>
<state></state>
</option>
<option>
<name>CCTcpIpAlt</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CCJLinkTcpIpSerialNo</name>
<state></state>
</option>
<option>
<name>CCCpuClockEdit</name>
<state></state>
</option>
<option>
<name>CCSwoClockAuto</name>
<state>0</state>
</option>
<option>
<name>CCSwoClockEdit</name>
<state>2000</state>
</option>
<option>
<name>OCJLinkTraceSource</name>
<state>0</state>
</option>
<option>
<name>OCJLinkTraceSourceDummy</name>
<state>0</state>
</option>
<option>
<name>OCJLinkDeviceName</name>
<state>1</state>
</option>
</data>
</settings>
<settings>
<name>LMIFTDI_ID</name>
<archiveVersion>2</archiveVersion>
<data>
<version>3</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>OCDriverInfo</name>
<state>1</state>
</option>
<option>
<name>LmiftdiSpeed</name>
<state>500</state>
</option>
<option>
<name>CCLmiftdiDoLogfile</name>
<state>0</state>
</option>
<option>
<name>CCLmiftdiLogFile</name>
<state>$PROJ_DIR$\cspycomm.log</state>
</option>
<option>
<name>CCLmiFtdiInterfaceRadio</name>
<state>1</state>
</option>
<option>
<name>CCLmiFtdiInterfaceCmdLine</name>
<state>0</state>
</option>
<option>
<name>CCLmiftdiUsbSerialNo</name>
<state></state>
</option>
<option>
<name>CCLmiftdiUsbSerialNoSelect</name>
<state>0</state>
</option>
<option>
<name>CCLmiftdiResetList</name>
<version>0</version>
<state>0</state>
</option>
</data>
</settings>
<settings>
<name>NULINK_ID</name>
<archiveVersion>2</archiveVersion>
<data>
<version>0</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>OCDriverInfo</name>
<state>1</state>
</option>
<option>
<name>DoLogfile</name>
<state>0</state>
</option>
<option>
<name>LogFile</name>
<state>$PROJ_DIR$\cspycomm.log</state>
</option>
</data>
</settings>
<settings>
<name>PEMICRO_ID</name>
<archiveVersion>2</archiveVersion>
<data>
<version>3</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>OCDriverInfo</name>
<state>1</state>
</option>
<option>
<name>CCJPEMicroShowSettings</name>
<state>0</state>
</option>
<option>
<name>DoLogfile</name>
<state>0</state>
</option>
<option>
<name>LogFile</name>
<state>$PROJ_DIR$\cspycomm.log</state>
</option>
</data>
</settings>
<settings>
<name>STLINK_ID</name>
<archiveVersion>2</archiveVersion>
<data>
<version>7</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>OCDriverInfo</name>
<state>1</state>
</option>
<option>
<name>CCSTLinkInterfaceRadio</name>
<state>1</state>
</option>
<option>
<name>CCSTLinkInterfaceCmdLine</name>
<state>0</state>
</option>
<option>
<name>CCSTLinkResetList</name>
<version>3</version>
<state>0</state>
</option>
<option>
<name>CCCpuClockEdit</name>
<state></state>
</option>
<option>
<name>CCSwoClockAuto</name>
<state>1</state>
</option>
<option>
<name>CCSwoClockEdit</name>
<state>2000</state>
</option>
<option>
<name>DoLogfile</name>
<state>0</state>
</option>
<option>
<name>LogFile</name>
<state>$PROJ_DIR$\cspycomm.log</state>
</option>
<option>
<name>CCSTLinkDoUpdateBreakpoints</name>
<state>0</state>
</option>
<option>
<name>CCSTLinkUpdateBreakpoints</name>
<state>_call_main</state>
</option>
<option>
<name>CCSTLinkCatchCORERESET</name>
<state>0</state>
</option>
<option>
<name>CCSTLinkCatchMMERR</name>
<state>0</state>
</option>
<option>
<name>CCSTLinkCatchNOCPERR</name>
<state>0</state>
</option>
<option>
<name>CCSTLinkCatchCHRERR</name>
<state>0</state>
</option>
<option>
<name>CCSTLinkCatchSTATERR</name>
<state>0</state>
</option>
<option>
<name>CCSTLinkCatchBUSERR</name>
<state>0</state>
</option>
<option>
<name>CCSTLinkCatchINTERR</name>
<state>0</state>
</option>
<option>
<name>CCSTLinkCatchSFERR</name>
<state>0</state>
</option>
<option>
<name>CCSTLinkCatchHARDERR</name>
<state>0</state>
</option>
<option>
<name>CCSTLinkCatchDummy</name>
<state>0</state>
</option>
<option>
<name>CCSTLinkUsbSerialNo</name>
<state></state>
</option>
<option>
<name>CCSTLinkUsbSerialNoSelect</name>
<state>0</state>
</option>
<option>
<name>CCSTLinkJtagSpeedList</name>
<version>2</version>
<state>0</state>
</option>
<option>
<name>CCSTLinkDAPNumber</name>
<state></state>
</option>
<option>
<name>CCSTLinkDebugAccessPortRadio</name>
<state>0</state>
</option>
<option>
<name>CCSTLinkUseServerSelect</name>
<state>0</state>
</option>
<option>
<name>CCSTLinkProbeList</name>
<version>1</version>
<state>0</state>
</option>
</data>
</settings>
<settings>
<name>THIRDPARTY_ID</name>
<archiveVersion>2</archiveVersion>
<data>
<version>0</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>CThirdPartyDriverDll</name>
<state>###Uninitialized###</state>
</option>
<option>
<name>CThirdPartyLogFileCheck</name>
<state>0</state>
</option>
<option>
<name>CThirdPartyLogFileEditB</name>
<state>$PROJ_DIR$\cspycomm.log</state>
</option>
<option>
<name>OCDriverInfo</name>
<state>1</state>
</option>
</data>
</settings>
<settings>
<name>TIFET_ID</name>
<archiveVersion>2</archiveVersion>
<data>
<version>1</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>OCDriverInfo</name>
<state>1</state>
</option>
<option>
<name>CCMSPFetResetList</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CCMSPFetInterfaceRadio</name>
<state>0</state>
</option>
<option>
<name>CCMSPFetInterfaceCmdLine</name>
<state>0</state>
</option>
<option>
<name>CCMSPFetTargetVccTypeDefault</name>
<state>0</state>
</option>
<option>
<name>CCMSPFetTargetVoltage</name>
<state>###Uninitialized###</state>
</option>
<option>
<name>CCMSPFetVCCDefault</name>
<state>1</state>
</option>
<option>
<name>CCMSPFetTargetSettlingtime</name>
<state>0</state>
</option>
<option>
<name>CCMSPFetRadioJtagSpeedType</name>
<state>1</state>
</option>
<option>
<name>CCMSPFetConnection</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CCMSPFetUsbComPort</name>
<state>Automatic</state>
</option>
<option>
<name>CCMSPFetAllowAccessToBSL</name>
<state>0</state>
</option>
<option>
<name>CCMSPFetDoLogfile</name>
<state>0</state>
</option>
<option>
<name>CCMSPFetLogFile</name>
<state>$PROJ_DIR$\cspycomm.log</state>
</option>
<option>
<name>CCMSPFetRadioEraseFlash</name>
<state>1</state>
</option>
</data>
</settings>
<settings>
<name>XDS100_ID</name>
<archiveVersion>2</archiveVersion>
<data>
<version>8</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>OCDriverInfo</name>
<state>1</state>
</option>
<option>
<name>TIPackageOverride</name>
<state>0</state>
</option>
<option>
<name>TIPackage</name>
<state></state>
</option>
<option>
<name>BoardFile</name>
<state></state>
</option>
<option>
<name>DoLogfile</name>
<state>0</state>
</option>
<option>
<name>LogFile</name>
<state>$PROJ_DIR$\cspycomm.log</state>
</option>
<option>
<name>CCXds100BreakpointRadio</name>
<state>0</state>
</option>
<option>
<name>CCXds100DoUpdateBreakpoints</name>
<state>0</state>
</option>
<option>
<name>CCXds100UpdateBreakpoints</name>
<state>_call_main</state>
</option>
<option>
<name>CCXds100CatchReset</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchUndef</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchSWI</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchData</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchPrefetch</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchIRQ</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchFIQ</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchCORERESET</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchMMERR</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchNOCPERR</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchCHRERR</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchSTATERR</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchBUSERR</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchINTERR</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchSFERR</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchHARDERR</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchDummy</name>
<state>0</state>
</option>
<option>
<name>CCXds100CpuClockEdit</name>
<state></state>
</option>
<option>
<name>CCXds100SwoClockAuto</name>
<state>0</state>
</option>
<option>
<name>CCXds100SwoClockEdit</name>
<state>1000</state>
</option>
<option>
<name>CCXds100HWResetDelay</name>
<state>0</state>
</option>
<option>
<name>CCXds100ResetList</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CCXds100UsbSerialNo</name>
<state></state>
</option>
<option>
<name>CCXds100UsbSerialNoSelect</name>
<state>0</state>
</option>
<option>
<name>CCXds100JtagSpeedList</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CCXds100InterfaceRadio</name>
<state>2</state>
</option>
<option>
<name>CCXds100InterfaceCmdLine</name>
<state>0</state>
</option>
<option>
<name>CCXds100ProbeList</name>
<version>0</version>
<state>3</state>
</option>
<option>
<name>CCXds100SWOPortRadio</name>
<state>0</state>
</option>
<option>
<name>CCXds100SWOPort</name>
<state>1</state>
</option>
<option>
<name>CCXDSTargetVccEnable</name>
<state>0</state>
</option>
<option>
<name>CCXDSTargetVoltage</name>
<state>###Uninitialized###</state>
</option>
<option>
<name>OCXDSDigitalStatesConfigFile</name>
<state>1</state>
</option>
</data>
</settings>
<debuggerPlugins>
<plugin>
<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
<loadFlag>0</loadFlag>
</plugin>
<plugin>
<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
<loadFlag>0</loadFlag>
</plugin>
<plugin>
<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
<loadFlag>0</loadFlag>
</plugin>
<plugin>
<file>$TOOLKIT_DIR$\plugins\rtos\FreeRtos\FreeRtosArmPlugin.ENU.ewplugin</file>
<loadFlag>0</loadFlag>
</plugin>
<plugin>
<file>$TOOLKIT_DIR$\plugins\rtos\Mbed\MbedArmPlugin.ENU.ewplugin</file>
<loadFlag>0</loadFlag>
</plugin>
<plugin>
<file>$TOOLKIT_DIR$\plugins\rtos\Mbed\MbedArmPlugin2.ENU.ewplugin</file>
<loadFlag>0</loadFlag>
</plugin>
<plugin>
<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
<loadFlag>0</loadFlag>
</plugin>
<plugin>
<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
<loadFlag>0</loadFlag>
</plugin>
<plugin>
<file>$TOOLKIT_DIR$\plugins\rtos\SMX\smxAwareIarArm9.ewplugin</file>
<loadFlag>0</loadFlag>
</plugin>
<plugin>
<file>$TOOLKIT_DIR$\plugins\rtos\SMX\smxAwareIarArm9BE.ewplugin</file>
<loadFlag>0</loadFlag>
</plugin>
<plugin>
<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
<loadFlag>0</loadFlag>
</plugin>
<plugin>
<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
<loadFlag>0</loadFlag>
</plugin>
<plugin>
<file>$EW_DIR$\common\plugins\TargetAccessServer\TargetAccessServer.ENU.ewplugin</file>
<loadFlag>0</loadFlag>
</plugin>
<plugin>
<file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
<loadFlag>0</loadFlag>
</plugin>
</debuggerPlugins>
</configuration>
</project>