300 lines
14 KiB
C
300 lines
14 KiB
C
|
/*
|
||
|
|
* The Clear BSD License
|
||
|
|
* Copyright (c) 2016, Freescale Semiconductor, Inc.
|
||
|
|
* Copyright 2016-2017 NXP
|
||
|
|
* All rights reserved.
|
||
|
|
*
|
||
|
|
* Redistribution and use in source and binary forms, with or without
|
||
|
|
* modification,
|
||
|
|
* are permitted (subject to the limitations in the disclaimer below) provided
|
||
|
|
* that the following conditions are met:
|
||
|
|
*
|
||
|
|
* o Redistributions of source code must retain the above copyright notice, this
|
||
|
|
* list
|
||
|
|
* of conditions and the following disclaimer.
|
||
|
|
*
|
||
|
|
* o Redistributions in binary form must reproduce the above copyright notice,
|
||
|
|
* this
|
||
|
|
* list of conditions and the following disclaimer in the documentation and/or
|
||
|
|
* other materials provided with the distribution.
|
||
|
|
*
|
||
|
|
* o Neither the name of Freescale Semiconductor, Inc. nor the names of its
|
||
|
|
* contributors may be used to endorse or promote products derived from this
|
||
|
|
* software without specific prior written permission.
|
||
|
|
*
|
||
|
|
* NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED BY THIS LICENSE.
|
||
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||
|
|
* AND
|
||
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||
|
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||
|
|
* FOR
|
||
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||
|
|
* DAMAGES
|
||
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||
|
|
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||
|
|
* ON
|
||
|
|
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||
|
|
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||
|
|
*/
|
||
|
|
|
||
|
|
#ifndef __FLEXSPI_NOR_FLASH_H__
|
||
|
|
#define __FLEXSPI_NOR_FLASH_H__
|
||
|
|
|
||
|
|
#include <stdint.h>
|
||
|
|
#include <stdbool.h>
|
||
|
|
#include "fsl_common.h"
|
||
|
|
|
||
|
|
/* FLEXSPI memory config block related defintions */
|
||
|
|
#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian
|
||
|
|
#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0
|
||
|
|
#define FLEXSPI_CFG_BLK_SIZE (512)
|
||
|
|
|
||
|
|
/* FLEXSPI Feature related definitions */
|
||
|
|
#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1
|
||
|
|
|
||
|
|
/* Lookup table related defintions */
|
||
|
|
#define CMD_INDEX_READ 0
|
||
|
|
#define CMD_INDEX_READSTATUS 1
|
||
|
|
#define CMD_INDEX_WRITEENABLE 2
|
||
|
|
#define CMD_INDEX_WRITE 4
|
||
|
|
|
||
|
|
#define CMD_LUT_SEQ_IDX_READ 0
|
||
|
|
#define CMD_LUT_SEQ_IDX_READSTATUS 1
|
||
|
|
#define CMD_LUT_SEQ_IDX_WRITEENABLE 3
|
||
|
|
#define CMD_LUT_SEQ_IDX_WRITE 9
|
||
|
|
|
||
|
|
#define CMD_SDR 0x01
|
||
|
|
#define CMD_DDR 0x21
|
||
|
|
#define RADDR_SDR 0x02
|
||
|
|
#define RADDR_DDR 0x22
|
||
|
|
#define CADDR_SDR 0x03
|
||
|
|
#define CADDR_DDR 0x23
|
||
|
|
#define MODE1_SDR 0x04
|
||
|
|
#define MODE1_DDR 0x24
|
||
|
|
#define MODE2_SDR 0x05
|
||
|
|
#define MODE2_DDR 0x25
|
||
|
|
#define MODE4_SDR 0x06
|
||
|
|
#define MODE4_DDR 0x26
|
||
|
|
#define MODE8_SDR 0x07
|
||
|
|
#define MODE8_DDR 0x27
|
||
|
|
#define WRITE_SDR 0x08
|
||
|
|
#define WRITE_DDR 0x28
|
||
|
|
#define READ_SDR 0x09
|
||
|
|
#define READ_DDR 0x29
|
||
|
|
#define LEARN_SDR 0x0A
|
||
|
|
#define LEARN_DDR 0x2A
|
||
|
|
#define DATSZ_SDR 0x0B
|
||
|
|
#define DATSZ_DDR 0x2B
|
||
|
|
#define DUMMY_SDR 0x0C
|
||
|
|
#define DUMMY_DDR 0x2C
|
||
|
|
#define DUMMY_RWDS_SDR 0x0D
|
||
|
|
#define DUMMY_RWDS_DDR 0x2D
|
||
|
|
#define JMP_ON_CS 0x1F
|
||
|
|
#define STOP 0
|
||
|
|
|
||
|
|
#define FLEXSPI_1PAD 0
|
||
|
|
#define FLEXSPI_2PAD 1
|
||
|
|
#define FLEXSPI_4PAD 2
|
||
|
|
#define FLEXSPI_8PAD 3
|
||
|
|
|
||
|
|
#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \
|
||
|
|
(FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \
|
||
|
|
FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1))
|
||
|
|
|
||
|
|
//!@brief Definitions for FlexSPI Serial Clock Frequency
|
||
|
|
typedef enum _FlexSpiSerialClockFreq
|
||
|
|
{
|
||
|
|
kFlexSpiSerialClk_30MHz = 1,
|
||
|
|
kFlexSpiSerialClk_50MHz = 2,
|
||
|
|
kFlexSpiSerialClk_60MHz = 3,
|
||
|
|
kFlexSpiSerialClk_75MHz = 4,
|
||
|
|
kFlexSpiSerialClk_80MHz = 5,
|
||
|
|
kFlexSpiSerialClk_100MHz = 6,
|
||
|
|
kFlexSpiSerialClk_133MHz = 7,
|
||
|
|
kFlexSpiSerialClk_166MHz = 8,
|
||
|
|
kFlexSpiSerialClk_200MHz = 9,
|
||
|
|
} flexspi_serial_clk_freq_t;
|
||
|
|
|
||
|
|
//!@brief FlexSPI clock configuration type
|
||
|
|
enum
|
||
|
|
{
|
||
|
|
kFlexSpiClk_SDR, //!< Clock configure for SDR mode
|
||
|
|
kFlexSpiClk_DDR, //!< Clock configurat for DDR mode
|
||
|
|
};
|
||
|
|
|
||
|
|
//!@brief FlexSPI Read Sample Clock Source definition
|
||
|
|
typedef enum _FlashReadSampleClkSource
|
||
|
|
{
|
||
|
|
kFlexSPIReadSampleClk_LoopbackInternally = 0,
|
||
|
|
kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1,
|
||
|
|
kFlexSPIReadSampleClk_LoopbackFromSckPad = 2,
|
||
|
|
kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3,
|
||
|
|
} flexspi_read_sample_clk_t;
|
||
|
|
|
||
|
|
|
||
|
|
//!@brief Misc feature bit definitions
|
||
|
|
enum
|
||
|
|
{
|
||
|
|
kFlexSpiMiscOffset_DiffClkEnable = 0, //!< Bit for Differential clock enable
|
||
|
|
kFlexSpiMiscOffset_Ck2Enable = 1, //!< Bit for CK2 enable
|
||
|
|
kFlexSpiMiscOffset_ParallelEnable = 2, //!< Bit for Parallel mode enable
|
||
|
|
kFlexSpiMiscOffset_WordAddressableEnable = 3, //!< Bit for Word Addressable enable
|
||
|
|
kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, //!< Bit for Safe Configuration Frequency enable
|
||
|
|
kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable
|
||
|
|
kFlexSpiMiscOffset_DdrModeEnable = 6, //!< Bit for DDR clock confiuration indication.
|
||
|
|
};
|
||
|
|
|
||
|
|
//!@brief Flash Type Definition
|
||
|
|
enum
|
||
|
|
{
|
||
|
|
kFlexSpiDeviceType_SerialNOR = 1, //!< Flash devices are Serial NOR
|
||
|
|
kFlexSpiDeviceType_SerialNAND = 2, //!< Flash devices are Serial NAND
|
||
|
|
kFlexSpiDeviceType_SerialRAM = 3, //!< Flash devices are Serial RAM/HyperFLASH
|
||
|
|
kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND
|
||
|
|
kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs
|
||
|
|
};
|
||
|
|
|
||
|
|
//!@brief Flash Pad Definitions
|
||
|
|
enum
|
||
|
|
{
|
||
|
|
kSerialFlash_1Pad = 1,
|
||
|
|
kSerialFlash_2Pads = 2,
|
||
|
|
kSerialFlash_4Pads = 4,
|
||
|
|
kSerialFlash_8Pads = 8,
|
||
|
|
};
|
||
|
|
|
||
|
|
//!@brief FlexSPI LUT Sequence structure
|
||
|
|
typedef struct _lut_sequence
|
||
|
|
{
|
||
|
|
uint8_t seqNum; //!< Sequence Number, valid number: 1-16
|
||
|
|
uint8_t seqId; //!< Sequence Index, valid number: 0-15
|
||
|
|
uint16_t reserved;
|
||
|
|
} flexspi_lut_seq_t;
|
||
|
|
|
||
|
|
//!@brief Flash Configuration Command Type
|
||
|
|
enum
|
||
|
|
{
|
||
|
|
kDeviceConfigCmdType_Generic, //!< Generic command, for example: configure dummy cycles, drive strength, etc
|
||
|
|
kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command
|
||
|
|
kDeviceConfigCmdType_Spi2Xpi, //!< Switch from SPI to DPI/QPI/OPI mode
|
||
|
|
kDeviceConfigCmdType_Xpi2Spi, //!< Switch from DPI/QPI/OPI to SPI mode
|
||
|
|
kDeviceConfigCmdType_Spi2NoCmd, //!< Switch to 0-4-4/0-8-8 mode
|
||
|
|
kDeviceConfigCmdType_Reset, //!< Reset device command
|
||
|
|
};
|
||
|
|
|
||
|
|
//!@brief FlexSPI Memory Configuration Block
|
||
|
|
typedef struct _FlexSPIConfig
|
||
|
|
{
|
||
|
|
uint32_t tag; //!< [0x000-0x003] Tag, fixed value 0x42464346UL
|
||
|
|
uint32_t version; //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
|
||
|
|
uint32_t reserved0; //!< [0x008-0x00b] Reserved for future use
|
||
|
|
uint8_t readSampleClkSrc; //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
|
||
|
|
uint8_t csHoldTime; //!< [0x00d-0x00d] CS hold time, default value: 3
|
||
|
|
uint8_t csSetupTime; //!< [0x00e-0x00e] CS setup time, default value: 3
|
||
|
|
uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For
|
||
|
|
//! Serial NAND, need to refer to datasheet
|
||
|
|
uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
|
||
|
|
uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch,
|
||
|
|
//! Generic configuration, etc.
|
||
|
|
uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for
|
||
|
|
//! DPI/QPI/OPI switch or reset command
|
||
|
|
flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt
|
||
|
|
//! sequence number, [31:16] Reserved
|
||
|
|
uint32_t deviceModeArg; //!< [0x018-0x01b] Argument/Parameter for device configuration
|
||
|
|
uint8_t configCmdEnable; //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
|
||
|
|
uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
|
||
|
|
flexspi_lut_seq_t
|
||
|
|
configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
|
||
|
|
uint32_t reserved1; //!< [0x02c-0x02f] Reserved for future use
|
||
|
|
uint32_t configCmdArgs[3]; //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands
|
||
|
|
uint32_t reserved2; //!< [0x03c-0x03f] Reserved for future use
|
||
|
|
uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more
|
||
|
|
//! details
|
||
|
|
uint8_t deviceType; //!< [0x044-0x044] Device Type: See Flash Type Definition for more details
|
||
|
|
uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
|
||
|
|
uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot
|
||
|
|
//! Chapter for more details
|
||
|
|
uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot
|
||
|
|
//! be done using 1 LUT sequence, currently, only applicable to HyperFLASH
|
||
|
|
uint32_t reserved3[2]; //!< [0x048-0x04f] Reserved for future use
|
||
|
|
uint32_t sflashA1Size; //!< [0x050-0x053] Size of Flash connected to A1
|
||
|
|
uint32_t sflashA2Size; //!< [0x054-0x057] Size of Flash connected to A2
|
||
|
|
uint32_t sflashB1Size; //!< [0x058-0x05b] Size of Flash connected to B1
|
||
|
|
uint32_t sflashB2Size; //!< [0x05c-0x05f] Size of Flash connected to B2
|
||
|
|
uint32_t csPadSettingOverride; //!< [0x060-0x063] CS pad setting override value
|
||
|
|
uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value
|
||
|
|
uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value
|
||
|
|
uint32_t dqsPadSettingOverride; //!< [0x06c-0x06f] DQS pad setting override value
|
||
|
|
uint32_t timeoutInMs; //!< [0x070-0x073] Timeout threshold for read status command
|
||
|
|
uint32_t commandInterval; //!< [0x074-0x077] CS deselect interval between two commands
|
||
|
|
uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
|
||
|
|
uint16_t busyOffset; //!< [0x07c-0x07d] Busy offset, valid value: 0-31
|
||
|
|
uint16_t busyBitPolarity; //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 -
|
||
|
|
//! busy flag is 0 when flash device is busy
|
||
|
|
uint32_t lookupTable[64]; //!< [0x080-0x17f] Lookup table holds Flash command sequences
|
||
|
|
flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences
|
||
|
|
uint32_t reserved4[4]; //!< [0x1b0-0x1bf] Reserved for future use
|
||
|
|
} flexspi_mem_config_t;
|
||
|
|
|
||
|
|
/* */
|
||
|
|
#define NOR_CMD_INDEX_READ CMD_INDEX_READ //!< 0
|
||
|
|
#define NOR_CMD_INDEX_READSTATUS CMD_INDEX_READSTATUS //!< 1
|
||
|
|
#define NOR_CMD_INDEX_WRITEENABLE CMD_INDEX_WRITEENABLE //!< 2
|
||
|
|
#define NOR_CMD_INDEX_ERASESECTOR 3 //!< 3
|
||
|
|
#define NOR_CMD_INDEX_PAGEPROGRAM CMD_INDEX_WRITE //!< 4
|
||
|
|
#define NOR_CMD_INDEX_CHIPERASE 5 //!< 5
|
||
|
|
#define NOR_CMD_INDEX_DUMMY 6 //!< 6
|
||
|
|
#define NOR_CMD_INDEX_ERASEBLOCK 7 //!< 7
|
||
|
|
|
||
|
|
#define NOR_CMD_LUT_SEQ_IDX_READ CMD_LUT_SEQ_IDX_READ //!< 0 READ LUT sequence id in lookupTable stored in config block
|
||
|
|
#define NOR_CMD_LUT_SEQ_IDX_READSTATUS \
|
||
|
|
CMD_LUT_SEQ_IDX_READSTATUS //!< 1 Read Status LUT sequence id in lookupTable stored in config block
|
||
|
|
#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI \
|
||
|
|
2 //!< 2 Read status DPI/QPI/OPI sequence id in lookupTable stored in config block
|
||
|
|
#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE \
|
||
|
|
CMD_LUT_SEQ_IDX_WRITEENABLE //!< 3 Write Enable sequence id in lookupTable stored in config block
|
||
|
|
#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI \
|
||
|
|
4 //!< 4 Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config block
|
||
|
|
#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5 //!< 5 Erase Sector sequence id in lookupTable stored in config block
|
||
|
|
#define NOR_CMD_LUT_SEQ_IDX_ERASEBLOCK 8 //!< 8 Erase Block sequence id in lookupTable stored in config block
|
||
|
|
#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM \
|
||
|
|
CMD_LUT_SEQ_IDX_WRITE //!< 9 Program sequence id in lookupTable stored in config block
|
||
|
|
#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11 //!< 11 Chip Erase sequence in lookupTable id stored in config block
|
||
|
|
#define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13 //!< 13 Read SFDP sequence in lookupTable id stored in config block
|
||
|
|
#define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD \
|
||
|
|
14 //!< 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config block
|
||
|
|
#define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD \
|
||
|
|
15 //!< 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config blobk
|
||
|
|
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Serial NOR configuration block
|
||
|
|
*/
|
||
|
|
typedef struct _flexspi_nor_config
|
||
|
|
{
|
||
|
|
flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI
|
||
|
|
uint32_t pageSize; //!< Page size of Serial NOR
|
||
|
|
uint32_t sectorSize; //!< Sector size of Serial NOR
|
||
|
|
uint8_t ipcmdSerialClkFreq; //!< Clock frequency for IP command
|
||
|
|
uint8_t isUniformBlockSize; //!< Sector/Block size is the same
|
||
|
|
uint8_t reserved0[2]; //!< Reserved for future use
|
||
|
|
uint8_t serialNorType; //!< Serial NOR Flash type: 0/1/2/3
|
||
|
|
uint8_t needExitNoCmdMode; //!< Need to exit NoCmd mode before other IP command
|
||
|
|
uint8_t halfClkForNonReadCmd; //!< Half the Serial Clock for non-read command: true/false
|
||
|
|
uint8_t needRestoreNoCmdMode; //!< Need to Restore NoCmd mode after IP commmand execution
|
||
|
|
uint32_t blockSize; //!< Block size
|
||
|
|
uint32_t reserve2[11]; //!< Reserved for future use
|
||
|
|
} flexspi_nor_config_t;
|
||
|
|
|
||
|
|
#ifdef __cplusplus
|
||
|
|
extern "C" {
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#ifdef __cplusplus
|
||
|
|
}
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#endif // __FLEXSPI_NOR_FLASH_H__
|