rt-thread/bsp/hpmicro/hpm6750evk2/board/eth_phy_port.h

171 lines
5.0 KiB
C
Raw Normal View History

/*
* Copyright (c) 2023 hpmicro
*
* SPDX-License-Identifier: BSD-3-Clause
*
*/
#ifndef ETH_PHY_PORT_H
#define ETH_PHY_PORT_H
#include "hpm_ioc_regs.h"
#include <rtdevice.h>
#ifndef PHY_AUTO_NEGO
#define PHY_AUTO_NEGO (1U)
#endif
#ifndef PHY_MDIO_CSR_CLK_FREQ
#define PHY_MDIO_CSR_CLK_FREQ (200000000U)
#endif
enum phy_link_status
{
PHY_LINK_DOWN = 0U,
PHY_LINK_UP
};
typedef struct {
rt_uint32_t phy_speed;
rt_uint32_t phy_duplex;
} phy_info_t;
typedef struct {
rt_uint32_t phy_link;
rt_phy_t phy;
phy_info_t phy_info;
} phy_device_t;
#ifdef BSP_USING_ETH0
#define RGMII (1U)
/* RTL8211 name and ID */
#define PHY_NAME ("RTL8211")
#define PHY_ID1 (0x001CU)
#define PHY_ID2 (0x32U)
/* PHY_RTL8211 basic control register */
#define PHY_BASIC_CONTROL_REG (0x00U)
#define PHY_RESET_MASK (1U << 15)
#define PHY_AUTO_NEGOTIATION_MASK (1U << 12)
/* PHY_RTL8211 basic status register */
#define PHY_BASIC_STATUS_REG (0x01U)
#define PHY_LINKED_STATUS_MASK (1U << 2)
#define PHY_AUTONEGO_COMPLETE_MASK (1U << 5)
/* PHY_RTL8211 ID one register */
#define PHY_ID1_REG (0x02U)
/* PHY_RTL8211 ID two register */
#define PHY_ID2_REG (0x03U)
/* PHY_RTL8211 auto-negotiate advertise register */
#define PHY_AUTONEG_ADVERTISE_REG (0x04U)
/* PHY_RTL8211 status register */
#define PHY_STATUS_REG (0x11U)
#define PHY_100M_MASK (1UL << 14)
#define PHY_1000M_MASK (1UL << 15)
#define PHY_FULL_DUPLEX_MASK (1UL << 13)
#define PHY_STATUS_SPEED_100M(SR) ((SR) & PHY_100M_MASK)
#define PHY_STATUS_SPEED_1000M(SR) ((SR) & PHY_1000M_MASK)
#define PHY_STATUS_FULL_DUPLEX(SR) ((SR) & PHY_FULL_DUPLEX_MASK)
#define PHY_SPEED_SEL_SHIFT (14U)
/* PHY_RTL8211 interrupt control register */
#define PHY_INTERTUPT_CTRL_REG (0x12U)
/* PHY_RTL8211 interrupt status register */
#define PHY_INTERRUPT_STATUS_REG (0x13U)
/* PHY register index */
typedef enum {
PHY_BASIC_CONTROL_REG_IDX = 0,
PHY_BASIC_STATUS_REG_IDX,
PHY_ID1_REG_IDX,
PHY_ID2_REG_IDX,
PHY_AUTONEG_ADVERTISE_REG_IDX,
PHY_STATUS_REG_IDX,
PHY_INTERRUPT_FLAG_REG_IDX,
PHY_INTERRUPT_MASK_REG_IDX
} phy_reg_idx_t;
/* ETH0 PHY register list */
#define PHY0_REG_LIST PHY_BASIC_CONTROL_REG,\
PHY_BASIC_STATUS_REG,\
PHY_ID1_REG,\
PHY_ID2_REG,\
PHY_AUTONEG_ADVERTISE_REG,\
PHY_STATUS_REG,\
PHY_INTERTUPT_CTRL_REG,\
PHY_INTERRUPT_STATUS_REG
#else
#include "hpm_rtl8201.h"
#define RMII (1U)
/* RTL8201 name and ID */
#define PHY_NAME ("RTL8201")
#define PHY_ID1 (0x001CU)
#define PHY_ID2 (0x32U)
/* RTL8201 basic control register */
#define PHY_BASIC_CONTROL_REG (0x00U)
#define PHY_RESET_MASK (1U << 15)
#define PHY_AUTO_NEGOTIATION_MASK (1U << 12)
/* RTL8201 basic status register */
#define PHY_BASIC_STATUS_REG (0x01U)
#define PHY_LINKED_STATUS_MASK (1U << 2)
#define PHY_AUTONEGO_COMPLETE_MASK (1U << 5)
/* RTL8201 ID one register */
#define PHY_ID1_REG (0x02U)
/* RTL8201 ID two register */
#define PHY_ID2_REG (0x03U)
/* RTL8201 auto-negotiate advertise register */
#define PHY_AUTONEG_ADVERTISE_REG (0x04U)
/* RTL8201 status register */
#define PHY_STATUS_REG (0x00U)
#define PHY_100M_MASK (1UL << 13)
#define PHY_FULL_DUPLEX_MASK (1UL << 8)
#define PHY_STATUS_SPEED_100M(SR) ((SR) & PHY_100M_MASK)
#define PHY_STATUS_FULL_DUPLEX(SR) ((SR) & PHY_FULL_DUPLEX_MASK)
/* RTL8201 mode setting register */
#define PHY_RMSR_P7 (0x10)
#define PHY_RMSR_P7_RG_RMII_CLKDIR_MASK (0x1000U)
/* RTL8201 page select register */
#define PHY_PAGESEL (0x1f)
/* PHY register index */
typedef enum {
PHY_BASIC_CONTROL_REG_IDX = 0,
PHY_BASIC_STATUS_REG_IDX,
PHY_ID1_REG_IDX,
PHY_ID2_REG_IDX,
PHY_AUTONEG_ADVERTISE_REG_IDX,
PHY_STATUS_REG_IDX,
PHY_RMSR_P7_IDX,
PHY_PAGE_SEL_IDX
} phy_reg_idx_t;
/* ETH0 PHY register list */
#define PHY1_REG_LIST PHY_BASIC_CONTROL_REG,\
PHY_BASIC_STATUS_REG,\
PHY_ID1_REG,\
PHY_ID2_REG,\
PHY_AUTONEG_ADVERTISE_REG,\
PHY_STATUS_REG,\
PHY_RMSR_P7_IDX,\
PHY_PAGE_SEL_IDX
#endif
#endif