rt-thread/bsp/AE210P/driver/lcd/lcd-info.h

115 lines
3.0 KiB
C
Raw Normal View History

#ifndef __LCD_INFO_H__
#define __LCD_INFO_H__
/*
* HBP : Horizontal Back Porch
* HFP : Horizontal Front Porch
* HSPW: Horizontal Sync. Pulse Width
* PPL : Pixels-per-line = 16(PPL+1)
*/
#define ENC_PARAM_TIME0(HBP, HFP, HSPW, PPL) \
((((HBP) - 1) << 24) | \
(((HFP) - 1) << 16) | \
(((HSPW) - 1) << 8 ) | \
((((PPL) >> 4) - 1) << 2 ))
/*
* HBP : Vertical Back Porch
* HFP : Vertical Front Porch
* HSPW: Vertical Sync. Pulse Width
* LPP : Lines-per-panel = LPP + 1
*/
#define ENC_PARAM_TIME1(VBP, VFP, VSPW, LPP) \
((((VBP) ) << 24) | \
(((VFP) ) << 16) | \
(((VSPW) - 1) << 10) | \
(((LPP) - 1) ))
/*
* PRA : Pixel Rate Adaptive
* IOE : Invert Panel Output Enable
* IPC : Invert Panel Clock (Test Chip Testing)
* IHS : Invert Horisontal Sync.
* IVS : Invert Versical Sync.
* PCD : Panel Clock Divisor
*/
#define ENC_PARAM_TIME2(PRA, IOE, IPC, IHS, IVS, PCD) \
(((PRA) << 15) | \
((IOE) << 14) | \
((IPC) << 13) | \
((IHS) << 12) | \
((IVS) << 11) | \
(((PCD) - 1) ))
/*
* Enable YCbCr
* Enable YCbCr422
* FIFO threadhold
* Panel type, 0-6bit, 1-8bit
* LcdVComp, when to generate interrupt, 1: start of back_porch
* Power Enable
* Big Endian Pixel/Byte Ordering
* BGR
* TFT
* LCD bits per pixel
* Controller Enable
*/
#define ENC_PARAM_CTRL(ENYUV, ENYUV422, FIFOTH, PTYPE, VCOMP, LCD_ON, ENDIAN, BGR, TFT, BPP, LCD_EN) \
((ENYUV << 18) | \
(ENYUV422 << 17) | \
(FIFOTH << 16) | \
(PTYPE << 15) | \
(VCOMP << 12) | \
(LCD_ON << 11) | \
(ENDIAN << 9) | \
(BGR << 8) | \
(TFT << 5) | \
(BPP << 1) | \
(LCD_EN))
#if defined(CONFIG_COLOR_DEPTH16)
#define LCD_COLOR_DEPTH 0x4
#define LCD_PANEL_BPP 16
#elif defined(CONFIG_COLOR_DEPTH24)
#define LCD_COLOR_DEPTH 0x5
#define LCD_PANEL_BPP 24
#else
#define LCD_COLOR_DEPTH 0x5
#define LCD_PANEL_BPP 24
#endif
#ifdef CONFIG_PANEL_AUA036QN01
#define LCD_PANEL_WIDTH 320
#define LCD_PANEL_HEIGHT 240
#define LCD_TIME0 ENC_PARAM_TIME0(7, 6, 1, 320) /* 0x0605004c */
#define LCD_TIME1 ENC_PARAM_TIME1(1, 1, 1, 240) /* 0x010100ef */
#define LCD_TIME2 ENC_PARAM_TIME2(0, 0, 1, 1, 1, 0x7) /* 0x00003806 */
#define LCD_CTRL ENC_PARAM_CTRL(0, 0, 1, 1, 0x3, 1, 0x0, 1, 1, LCD_COLOR_DEPTH, 1) /* 0x0001b928 */
#endif
#ifdef CONFIG_PANEL_AUA070VW04
#define LCD_PANEL_WIDTH 800
#define LCD_PANEL_HEIGHT 480
#define LCD_TIME0 ENC_PARAM_TIME0(88, 40, 128, 800)
#define LCD_TIME1 ENC_PARAM_TIME1(21, 1, 3, 480)
#define LCD_TIME2 ENC_PARAM_TIME2(0, 1, 1, 1, 1, 0x7)
#define LCD_CTRL ENC_PARAM_CTRL(0, 0, 1, 1, 0x3, 1, 0x0, 1, 1, LCD_COLOR_DEPTH, 1)
#endif
#ifdef CONFIG_PANEL_CH7013A
#define LCD_TIME0 ENC_PARAM_TIME0(42, 10, 96, 640)
#define LCD_TIME1 ENC_PARAM_TIME1(28, 5, 2, 480)
#define LCD_TIME2 ENC_PARAM_TIME2(0, 1, 1, 0, 0, 0x3)
#define LCD_CTRL ENC_PARAM_CTRL(0, 0, 1, 0, 0x3, 1, 0x0, 1, 1, LCD_COLOR_DEPTH, 1)
#endif /* CONFIG_CH7013A */
#endif /* __LCD_INFO_H__ */