rt-thread/bsp/Infineon/libraries/templates/PSOC62/board/linker_scripts/link.sct

#! armclang -E --target=arm-arm-none-eabi -x c -mcpu=cortex-m4
; The first line specifies a preprocessor command that the linker invokes
; to pass a scatter file through a C preprocessor.

;*******************************************************************************
;* \file cy8c6xxa_cm4_dual.sct
;* \version 2.91
;*
;* Linker file for the ARMCC.
;*
;* The main purpose of the linker script is to describe how the sections in the
;* input files should be mapped into the output file, and to control the memory
;* layout of the output file.
;*
;* \note The entry point location is fixed and starts at 0x10000000. The valid
;* application image should be placed there.
;*
;* \note The linker files included with the PDL template projects must be
;* generic and handle all common use cases. Your project may not use every
;* section defined in the linker files. In that case you may see the warnings
;* during the build process: L6314W (no section matches pattern) and/or L6329W
;* (pattern only matches removed unused sections). In your project, you can
;* suppress the warning by passing the "--diag_suppress=L6314W,L6329W" option to
;* the linker, simply comment out or remove the relevant code in the linker
;* file.
;*
;*******************************************************************************
;* \copyright
;* Copyright 2016-2021 Cypress Semiconductor Corporation
;* SPDX-License-Identifier: Apache-2.0
;*
;* Licensed under the Apache License, Version 2.0 (the "License");
;* you may not use this file except in compliance with the License.
;* You may obtain a copy of the License at
;*
;*     http://www.apache.org/licenses/LICENSE-2.0
;*
;* Unless required by applicable law or agreed to in writing, software
;* distributed under the License is distributed on an "AS IS" BASIS,
;* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
;* See the License for the specific language governing permissions and
;* limitations under the License.
;******************************************************************************/

; The defines below describe the location and size of blocks of memory in the target.
; Use these defines to specify the memory regions available for allocation.

; The following defines control RAM and flash memory allocation for the CM4 core.
; You can change the memory allocation by editing RAM and Flash defines.
; Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
; Using this memory region for other purposes will lead to unexpected behavior.
; Your changes must be aligned with the corresponding defines for CM0+ core in 'xx_cm0plus.scat',
; where 'xx' is the device group; for example, 'cy8c6xx7_cm0plus.scat'.
; RAM
#define RAM_START               0x08002000
#define RAM_SIZE                0x000FD800
; Flash
#define FLASH_START             0x10000000
#define FLASH_SIZE              0x00200000

; The size of the stack section at the end of CM4 SRAM
#define STACK_SIZE              0x00001000

; By default, the COMPONENT_CM0P_SLEEP prebuilt image is used for the CM0p core.
; More about CM0+ prebuilt images, see here:
; https://github.com/cypresssemiconductorco/psoc6cm0p
; The size of the Cortex-M0+ application flash image
#define FLASH_CM0P_SIZE         0x2000

; The following defines describe a 32K flash region used for EEPROM emulation.
; This region can also be used as the general purpose flash.
; You can assign sections to this memory region for only one of the cores.
; Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
; Therefore, repurposing this memory region will prevent such middleware from operation.
#define EM_EEPROM_START         0x14000000
#define EM_EEPROM_SIZE          0x8000

; The following defines describe device specific memory regions and must not be changed.
; Supervisory flash: User data
#define SFLASH_USER_DATA_START  0x16000800
#define SFLASH_USER_DATA_SIZE   0x00000800

; Supervisory flash: Normal Access Restrictions (NAR)
#define SFLASH_NAR_START        0x16001A00
#define SFLASH_NAR_SIZE         0x00000200

; Supervisory flash: Public Key
#define SFLASH_PUBLIC_KEY_START 0x16005A00
#define SFLASH_PUBLIC_KEY_SIZE  0x00000C00

; Supervisory flash: Table of Content # 2
#define SFLASH_TOC_2_START      0x16007C00
#define SFLASH_TOC_2_SIZE       0x00000200

; Supervisory flash: Table of Content # 2 Copy
#define SFLASH_RTOC_2_START     0x16007E00
#define SFLASH_RTOC_2_SIZE      0x00000200

; External memory
#define XIP_START               0x18000000
#define XIP_SIZE                0x08000000

; eFuse
#define EFUSE_START             0x90700000
#define EFUSE_SIZE              0x100000


; Cortex-M0+ application flash image area
LR_IROM FLASH_START FLASH_CM0P_SIZE
{
    .cy_m0p_image +0 FLASH_CM0P_SIZE
    {
        * (.cy_m0p_image)
    }
}

; Cortex-M4 application flash area
LR_IROM1 (FLASH_START + FLASH_CM0P_SIZE) (FLASH_SIZE - FLASH_CM0P_SIZE)
{
    ER_FLASH_VECTORS +0
    {
        * (RESET, +FIRST)
    }

    ER_FLASH_CODE +0 FIXED
    {
        * (InRoot$$Sections)
        * (+RO)
    }

    ER_RAM_VECTORS RAM_START UNINIT
    {
        * (RESET_RAM, +FIRST)
    }

    RW_RAM_DATA +0
    {
        * (.cy_ramfunc)
        * (+RW, +ZI)
    }

    ; Place variables in the section that should not be initialized during the
    ; device startup.
    RW_IRAM1 +0 UNINIT
    {
        * (.noinit)
    }

    ; Application heap area (HEAP)
    ARM_LIB_HEAP  +0 EMPTY ((RAM_START+RAM_SIZE)-AlignExpr(ImageLimit(RW_IRAM1), 8)-STACK_SIZE)
    {
    }

    ; Stack region growing down
    ARM_LIB_STACK (RAM_START+RAM_SIZE) EMPTY -STACK_SIZE
    {
    }

    ; Used for the digital signature of the secure application and the
    ; Bootloader SDK application. The size of the section depends on the required
    ; data size.
    .cy_app_signature (FLASH_START + FLASH_SIZE - 256) 256
    {
        * (.cy_app_signature)
    }
}


; Emulated EEPROM Flash area
LR_EM_EEPROM EM_EEPROM_START EM_EEPROM_SIZE
{
    .cy_em_eeprom +0
    {
        * (.cy_em_eeprom)
    }
}

; Supervisory flash: User data
LR_SFLASH_USER_DATA SFLASH_USER_DATA_START SFLASH_USER_DATA_SIZE
{
    .cy_sflash_user_data +0
    {
        * (.cy_sflash_user_data)
    }
}

; Supervisory flash: Normal Access Restrictions (NAR)
LR_SFLASH_NAR SFLASH_NAR_START SFLASH_NAR_SIZE
{
    .cy_sflash_nar +0
    {
        * (.cy_sflash_nar)
    }
}

; Supervisory flash: Public Key
LR_SFLASH_PUBLIC_KEY SFLASH_PUBLIC_KEY_START SFLASH_PUBLIC_KEY_SIZE
{
    .cy_sflash_public_key +0
    {
        * (.cy_sflash_public_key)
    }
}

; Supervisory flash: Table of Content # 2
LR_SFLASH_TOC_2 SFLASH_TOC_2_START SFLASH_TOC_2_SIZE
{
    .cy_toc_part2 +0
    {
        * (.cy_toc_part2)
    }
}

; Supervisory flash: Table of Content # 2 Copy
LR_SFLASH_RTOC_2 SFLASH_RTOC_2_START SFLASH_RTOC_2_SIZE
{
    .cy_rtoc_part2 +0
    {
        * (.cy_rtoc_part2)
    }
}


; Places the code in the Execute in Place (XIP) section. See the smif driver documentation for details.
LR_EROM XIP_START XIP_SIZE
{
    cy_xip +0
    {
        * (.cy_xip)
    }
}


; eFuse
LR_EFUSE EFUSE_START EFUSE_SIZE
{
    .cy_efuse +0
    {
        * (.cy_efuse)
    }
}


; The section is used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage.
CYMETA 0x90500000
{
    .cymeta +0 { * (.cymeta) }
}

/* The following symbols used by the cymcuelftool. */
/* Flash */
#define __cy_memory_0_start 0x10000000
#define __cy_memory_0_length  0x00200000
#define __cy_memory_0_row_size 0x200

/* Emulated EEPROM Flash area */
#define __cy_memory_1_start    0x14000000
#define __cy_memory_1_length   0x8000
#define __cy_memory_1_row_size 0x200

/* Supervisory Flash */
#define __cy_memory_2_start    0x16000000
#define __cy_memory_2_length   0x8000
#define __cy_memory_2_row_size 0x200

/* XIP */
#define __cy_memory_3_start    0x18000000
#define __cy_memory_3_length   0x08000000
#define __cy_memory_3_row_size 0x200

/* eFuse */
#define __cy_memory_4_start    0x90700000
#define __cy_memory_4_length   0x100000
#define __cy_memory_4_row_size 1


/* [] END OF FILE */