libs/rt-thread
libs
/
rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
rt-thread/bsp/stm32h743-nucleo/drivers/lan8742a.c

1092 lines
28 KiB
C
Raw Normal View History

[BSP] Add stm32h743-nucleo evaluation board transplantation project
2017-12-25 16:51:34 +08:00
/*
* File : drv_mpu.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2015, RT-Thread Development Team
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* Change Logs:
* Date Author Notes
* 2017-08-25 LongfeiMa transplantation driver of lan8742a
*/
#include <rtthread.h>
#include "lan8742a.h"
#include "etharp.h"
#include "ethernetif.h"
#include "stm32h7xx_hal.h"
#include "lwip/opt.h"
#include "lwip/ip_frag.h"
#include "lwip/def.h"
#include "lwip/inet_chksum.h"
#include "lwip/netif.h"
#include "lwip/snmp.h"
#include "lwip/stats.h"
#include "lwip/pbuf.h"
#include "lwipopts.h"
/** @defgroup LAN8742 LAN8742
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/** @defgroup LAN8742_Private_Defines LAN8742 Private Defines
* @{
*/
#define LAN8742_SW_RESET_TO ((uint32_t)500U) //software reset timeout deadline
#define LAN8742_INIT_TO ((uint32_t)2000U)//Wait for 2000ms to perform initialization
#define LAN8742_MAX_DEV_ADDR ((uint32_t)31U) //用于初始化时，搜索IC挂载的有效地址
#if defined ( __ICCARM__ ) /*!< IAR Compiler */
#pragma location=0x30040000
ETH_DMADescTypeDef DMARxDscrTab[ETH_RX_DESC_CNT]; /* Ethernet Rx DMA Descriptors */
#pragma location=0x30040060
ETH_DMADescTypeDef DMATxDscrTab[ETH_TX_DESC_CNT]; /* Ethernet Tx DMA Descriptors */
#pragma location=0x30040200
uint8_t Rx_Buff[ETH_RX_DESC_CNT][ETH_MAX_PACKET_SIZE]; /* Ethernet Receive Buffers */
#elif defined ( __CC_ARM ) /* MDK ARM Compiler */
__attribute__((at(0x30040000))) ETH_DMADescTypeDef DMARxDscrTab[ETH_RX_DESC_CNT]; /* Ethernet Rx DMA Descriptors */
__attribute__((at(0x30040060))) ETH_DMADescTypeDef DMATxDscrTab[ETH_TX_DESC_CNT]; /* Ethernet Tx DMA Descriptors */
__attribute__((at(0x30040200))) uint8_t Rx_Buff[ETH_RX_DESC_CNT][ETH_MAX_PACKET_SIZE]; /* Ethernet Receive Buffer */
#elif defined ( __GNUC__ ) /* GNU Compiler */
ETH_DMADescTypeDef DMARxDscrTab[ETH_RX_DESC_CNT] __attribute__((section(".RxDecripSection"))); /* Ethernet Rx DMA Descriptors */
ETH_DMADescTypeDef DMATxDscrTab[ETH_TX_DESC_CNT] __attribute__((section(".TxDecripSection"))); /* Ethernet Tx DMA Descriptors */
uint8_t Rx_Buff[ETH_RX_DESC_CNT][ETH_MAX_PACKET_SIZE] __attribute__((section(".RxArraySection"))); /* Ethernet Receive Buffers */
#endif
struct pbuf_custom rx_pbuf[ETH_RX_DESC_CNT];
uint32_t current_pbuf_idx =0;
ETH_HandleTypeDef EthHandle;
ETH_TxPacketConfig TxConfig;
#define MAX_ADDR_LEN 6
struct rt_lan8742_eth
{
/* inherit from ethernet device */
struct eth_device parent;
/* interface address info. */
rt_uint8_t dev_addr[MAX_ADDR_LEN]; /* hw address */
};
static struct rt_lan8742_eth lan8742_device;
static struct rt_semaphore sem_lock;
/*******************************************************************************
PHI IO Functions
*******************************************************************************/
/**
* @brief Initializes the MDIO interface GPIO and clocks.
* @param None
* @retval 0 if OK, -1 if ERROR
*/
int32_t ETH_PHY_IO_Init(void)
{
/* We assume that MDIO GPIO configuration is already done
in the ETH_MspInit() else it should be done here
*/
/* Configure the MDIO Clock */
HAL_ETH_SetMDIOClockRange(&EthHandle);
return 0;
}
/**
* @brief De-Initializes the MDIO interface .
* @param None
* @retval 0 if OK, -1 if ERROR
*/
int32_t ETH_PHY_IO_DeInit (void)
{
return 0;
}
/**
* @brief Read a PHY register through the MDIO interface.
* @param DevAddr: PHY port address
* @param RegAddr: PHY register address
* @param pRegVal: pointer to hold the register value
* @retval 0 if OK -1 if Error
*/
int32_t ETH_PHY_IO_ReadReg(uint32_t DevAddr, uint32_t RegAddr, uint32_t *pRegVal)
{
if(HAL_ETH_ReadPHYRegister(&EthHandle, DevAddr, RegAddr, pRegVal) != HAL_OK)
{
return -1;
}
return 0;
}
/**
* @brief Write a value to a PHY register through the MDIO interface.
* @param DevAddr: PHY port address
* @param RegAddr: PHY register address
* @param RegVal: Value to be written
* @retval 0 if OK -1 if Error
*/
int32_t ETH_PHY_IO_WriteReg(uint32_t DevAddr, uint32_t RegAddr, uint32_t RegVal)
{
if(HAL_ETH_WritePHYRegister(&EthHandle, DevAddr, RegAddr, RegVal) != HAL_OK)
{
return -1;
}
return 0;
}
/**
* @brief Get the time in millisecons used for internal PHY driver process.
* @retval Time value
*/
int32_t ETH_PHY_IO_GetTick(void)
{
return HAL_GetTick();
}
//IC相关结构体
lan8742_Object_t LAN8742 =
{
0, //LAN8742.DevAddr
0, //LAN8742.Is_Initialized
{
ETH_PHY_IO_Init, //LAN8742.IO.Init
ETH_PHY_IO_DeInit, //LAN8742.IO.DeInit
ETH_PHY_IO_WriteReg,//LAN8742.IO.WriteReg
ETH_PHY_IO_ReadReg, //LAN8742.IO.ReadReg
ETH_PHY_IO_GetTick, //LAN8742.IO.GetTick
},
NULL,
};
/*******************************************************************************
Ethernet MSP Routines
*******************************************************************************/
/**
* @brief Initializes the ETH MSP.
* @param heth: ETH handle
* @retval None
*/
void HAL_ETH_MspInit(ETH_HandleTypeDef *heth)
{
GPIO_InitTypeDef GPIO_InitStructure;
/* Ethernett MSP init: RMII Mode */
/* Enable GPIOs clocks */
__HAL_RCC_GPIOA_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE();
__HAL_RCC_GPIOC_CLK_ENABLE();
__HAL_RCC_GPIOG_CLK_ENABLE();
/* Ethernet pins configuration ************************************************/
/*
RMII_REF_CLK ----------------------> PA1
RMII_MDIO -------------------------> PA2
RMII_MDC --------------------------> PC1
RMII_MII_CRS_DV -------------------> PA7
RMII_MII_RXD0 ---------------------> PC4
RMII_MII_RXD1 ---------------------> PC5
RMII_MII_RXER ---------------------> PG2
RMII_MII_TX_EN --------------------> PG11
RMII_MII_TXD0 ---------------------> PG13
RMII_MII_TXD1 ---------------------> PB13
*/
/* Configure PA1, PA2 and PA7 */
GPIO_InitStructure.Speed = GPIO_SPEED_FREQ_HIGH;
GPIO_InitStructure.Mode = GPIO_MODE_AF_PP;
GPIO_InitStructure.Pull = GPIO_NOPULL;
GPIO_InitStructure.Alternate = GPIO_AF11_ETH;
GPIO_InitStructure.Pin = GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_7;
HAL_GPIO_Init(GPIOA, &GPIO_InitStructure);
/* Configure PB13 */
GPIO_InitStructure.Pin = GPIO_PIN_13;
HAL_GPIO_Init(GPIOB, &GPIO_InitStructure);
/* Configure PC1, PC4 and PC5 */
GPIO_InitStructure.Pin = GPIO_PIN_1 | GPIO_PIN_4 | GPIO_PIN_5;
HAL_GPIO_Init(GPIOC, &GPIO_InitStructure);
/* Configure PG2, PG11, PG13 and PG14 */
GPIO_InitStructure.Pin = GPIO_PIN_2 | GPIO_PIN_11 | GPIO_PIN_13;
HAL_GPIO_Init(GPIOG, &GPIO_InitStructure);
/* Enable the Ethernet global Interrupt */
HAL_NVIC_SetPriority(ETH_IRQn, 0x7, 0);
HAL_NVIC_EnableIRQ(ETH_IRQn);
/* Enable Ethernet clocks */
__HAL_RCC_ETH1MAC_CLK_ENABLE();
__HAL_RCC_ETH1TX_CLK_ENABLE();
__HAL_RCC_ETH1RX_CLK_ENABLE();
}
/**
* @brief Initialize the lan8742 and configure the needed hardware resources
* @param void.
* @retval LAN8742_STATUS_OK if OK
* LAN8742_STATUS_ADDRESS_ERROR if cannot find device address
* LAN8742_STATUS_READ_ERROR if connot read register
* LAN8742_STATUS_WRITE_ERROR if connot write to register
* LAN8742_STATUS_RESET_TIMEOUT if cannot perform a software reset
*/
static int32_t LAN8742_Init(lan8742_Object_t *pObj)
{
uint32_t tickstart = 0, regvalue = 0, addr = 0;
int32_t status = LAN8742_STATUS_OK;
if(pObj->Is_Initialized == 0)
{
if(pObj->IO.Init != 0)
{
/* GPIO and Clocks initialization */
pObj->IO.Init();
}
/* for later check */
pObj->DevAddr = LAN8742_MAX_DEV_ADDR + 1;
/* Get the device address from special mode register */
for(addr = 0; addr <= LAN8742_MAX_DEV_ADDR; addr ++)
{
if(pObj->IO.ReadReg(addr, LAN8742_REG_SMR, &regvalue) < 0)
{
status = LAN8742_STATUS_READ_ERROR;
/* Can't read from this device address
continue with next address */
continue;
}
if((regvalue & LAN8742_SMR_PHY_ADDR) == addr)
{
pObj->DevAddr = addr;
status = LAN8742_STATUS_OK;
break;
}
}
if(pObj->DevAddr > LAN8742_MAX_DEV_ADDR)
{
status = LAN8742_STATUS_ADDRESS_ERROR;
}
/* if device address is matched */
if(status == LAN8742_STATUS_OK)
{
/* set a software reset */
if(pObj->IO.WriteReg(pObj->DevAddr, LAN8742_REG_BCR, LAN8742_BCR_RESET) >= 0)
{
/* get software reset status */
if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_REG_BCR, &regvalue) >= 0)
{
tickstart = pObj->IO.GetTick();
/* wait until software reset is done or timeout occured */
while(regvalue & LAN8742_BCR_RESET)
{
if((pObj->IO.GetTick() - tickstart) <= LAN8742_SW_RESET_TO)
{
if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_REG_BCR, &regvalue) < 0)
{
status = LAN8742_STATUS_READ_ERROR;
break;
}
}
else
{
status = LAN8742_STATUS_RESET_TIMEOUT;
}
}
}
else
{
status = LAN8742_STATUS_READ_ERROR;
}
}
else
{
status = LAN8742_STATUS_WRITE_ERROR;
}
}
}
if(status == LAN8742_STATUS_OK)
{
tickstart = pObj->IO.GetTick();
/* Wait for 2s to perform initialization */
while((pObj->IO.GetTick() - tickstart) <= LAN8742_INIT_TO)
{
}
pObj->Is_Initialized = 1;
}
return status;
}
/**
* @brief De-Initialize the lan8742 and it's hardware resources
* @param void.
* @retval LAN8742_STATUS_ERROR / LAN8742_STATUS_OK
*/
static int32_t LAN8742_DeInit(lan8742_Object_t *pObj)
{
if(pObj->Is_Initialized)
{
if(pObj->IO.DeInit != 0)
{
if(pObj->IO.DeInit() < 0)
{
return LAN8742_STATUS_ERROR;
}
}
pObj->Is_Initialized = 0;
}
return LAN8742_STATUS_OK;
}
/**
* @brief Disable the LAN8742 power down mode.
* @param pObj: device object LAN8742_Object_t.
* @retval LAN8742_STATUS_OK if OK
* LAN8742_STATUS_READ_ERROR if connot read register
* LAN8742_STATUS_WRITE_ERROR if connot write to register
*/
static int32_t LAN8742_DisablePowerDownMode(lan8742_Object_t *pObj)
{
uint32_t readval = 0;
int32_t status = LAN8742_STATUS_OK;
if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_REG_BCR, &readval) >= 0)
{
readval &= ~LAN8742_BCR_POWER_DOWN;
/* Apply configuration */
if(pObj->IO.WriteReg(pObj->DevAddr, LAN8742_REG_BCR, readval) < 0)
{
status = LAN8742_STATUS_WRITE_ERROR;
}
}
else
{
status = LAN8742_STATUS_READ_ERROR;
}
return status;
}
/**
* @brief Enable the LAN8742 power down mode.
* @param pObj: device object LAN8742_Object_t.
* @retval LAN8742_STATUS_OK if OK
* LAN8742_STATUS_READ_ERROR if connot read register
* LAN8742_STATUS_WRITE_ERROR if connot write to register
*/
static int32_t LAN8742_EnablePowerDownMode(lan8742_Object_t *pObj)
{
uint32_t readval = 0;
int32_t status = LAN8742_STATUS_OK;
if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_REG_BCR, &readval) >= 0)
{
readval |= LAN8742_BCR_POWER_DOWN;
/* Apply configuration */
if(pObj->IO.WriteReg(pObj->DevAddr, LAN8742_REG_BCR, readval) < 0)
{
status = LAN8742_STATUS_WRITE_ERROR;
}
}
else
{
status = LAN8742_STATUS_READ_ERROR;
}
return status;
}
/**
* @brief Start the auto negotiation process.
* @param pObj: device object LAN8742_Object_t.
* @retval LAN8742_STATUS_OK if OK
* LAN8742_STATUS_READ_ERROR if connot read register
* LAN8742_STATUS_WRITE_ERROR if connot write to register
*/
static int32_t LAN8742_StartAutoNego(lan8742_Object_t *pObj)
{
uint32_t readval = 0;
int32_t status = LAN8742_STATUS_OK;
if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_REG_BCR, &readval) >= 0)
{
readval |= LAN8742_BCR_ANEG_EN;
/* Apply configuration */
if(pObj->IO.WriteReg(pObj->DevAddr, LAN8742_REG_BCR, readval) < 0)
{
status = LAN8742_STATUS_WRITE_ERROR;
}
}
else
{
status = LAN8742_STATUS_READ_ERROR;
}
return status;
}
/**
* @brief Get the link state of LAN8742 device.
* @param pObj: Pointer to device object.
* @param pLinkState: Pointer to link state
* @retval LAN8742_STATUS_LINK_DOWN if link is down
* LAN8742_STATUS_AUTONEGO_NOTDONE if Auto nego not completed
* LAN8742_STATUS_100MBITS_FULLDUPLEX if 100Mb/s FD
* LAN8742_STATUS_100MBITS_HALFDUPLEX if 100Mb/s HD
* LAN8742_STATUS_10MBITS_FULLDUPLEX if 10Mb/s FD
* LAN8742_STATUS_10MBITS_HALFDUPLEX if 10Mb/s HD
* LAN8742_STATUS_READ_ERROR if connot read register
* LAN8742_STATUS_WRITE_ERROR if connot write to register
*/
static int32_t LAN8742_GetLinkState(lan8742_Object_t *pObj)
{
uint32_t readval = 0;
/* Read Status register */
if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_REG_BSR, &readval) < 0)
{
return LAN8742_STATUS_READ_ERROR;
}
/* Read Status register again */
if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_REG_BSR, &readval) < 0)
{
return LAN8742_STATUS_READ_ERROR;
}
if((readval & LAN8742_BSR_LINK_STAT) == 0)
{
/* Return Link Down status */
return LAN8742_STATUS_LINK_DOWN;
}
/* Check Auto negotiaition */
if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_REG_BCR, &readval) < 0)
{
return LAN8742_STATUS_READ_ERROR;
}
if((readval & LAN8742_BCR_ANEG_EN) != LAN8742_BCR_ANEG_EN)
{
if(((readval & LAN8742_BCR_SPEED_SEL) == LAN8742_BCR_SPEED_SEL) && ((readval & LAN8742_BCR_DUPLEX) == LAN8742_BCR_DUPLEX))
{
return LAN8742_STATUS_100MBITS_FULLDUPLEX;
}
else if ((readval & LAN8742_BCR_SPEED_SEL) == LAN8742_BCR_SPEED_SEL)
{
return LAN8742_STATUS_100MBITS_HALFDUPLEX;
}
else if ((readval & LAN8742_BCR_DUPLEX) == LAN8742_BCR_DUPLEX)
{
return LAN8742_STATUS_10MBITS_FULLDUPLEX;
}
else
{
return LAN8742_STATUS_10MBITS_HALFDUPLEX;
}
}
else /* Auto Nego enabled */
{
if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_REG_PSCS, &readval) < 0)
{
return LAN8742_STATUS_READ_ERROR;
}
/* Check if auto nego not done */
if((readval & LAN8742_PHYSCSR_AUTONEGO_DONE) == 0)
{
return LAN8742_STATUS_AUTONEGO_NOTDONE;
}
if((readval & LAN8742_PHYSCSR_HCDSPEEDMASK) == LAN8742_PHYSCSR_100BTX_FD)
{
return LAN8742_STATUS_100MBITS_FULLDUPLEX;
}
else if ((readval & LAN8742_PHYSCSR_HCDSPEEDMASK) == LAN8742_PHYSCSR_100BTX_HD)
{
return LAN8742_STATUS_100MBITS_HALFDUPLEX;
}
else if ((readval & LAN8742_PHYSCSR_HCDSPEEDMASK) == LAN8742_PHYSCSR_10BT_FD)
{
return LAN8742_STATUS_10MBITS_FULLDUPLEX;
}
else
{
return LAN8742_STATUS_10MBITS_HALFDUPLEX;
}
}
}
/**
* @brief Set the link state of LAN8742 device.
* @param pObj: Pointer to device object.
* @param pLinkState: link state can be one of the following
* LAN8742_STATUS_100MBITS_FULLDUPLEX if 100Mb/s FD
* LAN8742_STATUS_100MBITS_HALFDUPLEX if 100Mb/s HD
* LAN8742_STATUS_10MBITS_FULLDUPLEX if 10Mb/s FD
* LAN8742_STATUS_10MBITS_HALFDUPLEX if 10Mb/s HD
* @retval LAN8742_STATUS_OK if OK
* LAN8742_STATUS_ERROR if parameter error
* LAN8742_STATUS_READ_ERROR if connot read register
* LAN8742_STATUS_WRITE_ERROR if connot write to register
*/
static int32_t LAN8742_SetLinkState(lan8742_Object_t *pObj, uint32_t LinkState)
{
uint32_t bcrvalue = 0;
int32_t status = LAN8742_STATUS_OK;
if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_REG_BCR, &bcrvalue) >= 0)
{
/* Disable link config (Auto nego, speed and duplex) */
bcrvalue &= ~(LAN8742_BCR_ANEG_EN | LAN8742_BCR_SPEED_SEL | LAN8742_BCR_DUPLEX);
if(LinkState == LAN8742_STATUS_100MBITS_FULLDUPLEX)
{
bcrvalue |= (LAN8742_BCR_SPEED_SEL | LAN8742_BCR_DUPLEX);
}
else if (LinkState == LAN8742_STATUS_100MBITS_HALFDUPLEX)
{
bcrvalue |= LAN8742_BCR_SPEED_SEL;
}
else if (LinkState == LAN8742_STATUS_10MBITS_FULLDUPLEX)
{
bcrvalue |= LAN8742_BCR_DUPLEX;
}
else
{
/* Wrong link status parameter */
status = LAN8742_STATUS_ERROR;
}
}
else
{
status = LAN8742_STATUS_READ_ERROR;
}
if(status == LAN8742_STATUS_OK)
{
/* Apply configuration */
if(pObj->IO.WriteReg(pObj->DevAddr, LAN8742_REG_BCR, bcrvalue) < 0)
{
status = LAN8742_STATUS_WRITE_ERROR;
}
}
return status;
}
/**
* @brief Enable loopback mode.
* @param pObj: Pointer to device object.
* @retval LAN8742_STATUS_OK if OK
* LAN8742_STATUS_READ_ERROR if connot read register
* LAN8742_STATUS_WRITE_ERROR if connot write to register
*/
static int32_t LAN8742_EnableLoopbackMode(lan8742_Object_t *pObj)
{
uint32_t readval = 0;
int32_t status = LAN8742_STATUS_OK;
if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_REG_BCR, &readval) >= 0)
{
readval |= LAN8742_BCR_LOOPBACK;
/* Apply configuration */
if(pObj->IO.WriteReg(pObj->DevAddr, LAN8742_REG_BCR, readval) < 0)
{
status = LAN8742_STATUS_WRITE_ERROR;
}
}
else
{
status = LAN8742_STATUS_READ_ERROR;
}
return status;
}
/**
* @brief Disable loopback mode.
* @param pObj: Pointer to device object.
* @retval LAN8742_STATUS_OK if OK
* LAN8742_STATUS_READ_ERROR if connot read register
* LAN8742_STATUS_WRITE_ERROR if connot write to register
*/
static int32_t LAN8742_DisableLoopbackMode(lan8742_Object_t *pObj)
{
uint32_t readval = 0;
int32_t status = LAN8742_STATUS_OK;
if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_REG_BCR, &readval) >= 0)
{
readval &= ~LAN8742_BCR_LOOPBACK;
/* Apply configuration */
if(pObj->IO.WriteReg(pObj->DevAddr, LAN8742_REG_BCR, readval) < 0)
{
status = LAN8742_STATUS_WRITE_ERROR;
}
}
else
{
status = LAN8742_STATUS_READ_ERROR;
}
return status;
}
/**
* @brief Enable IT source.
* @param pObj: Pointer to device object.
* @param Interrupt: IT source to be enabled
* should be a value or a combination of the following:
* LAN8742_WOL_IT
* LAN8742_ENERGYON_IT
* LAN8742_AUTONEGO_COMPLETE_IT
* LAN8742_REMOTE_FAULT_IT
* LAN8742_LINK_DOWN_IT
* LAN8742_AUTONEGO_LP_ACK_IT
* LAN8742_PARALLEL_DETECTION_FAULT_IT
* LAN8742_AUTONEGO_PAGE_RECEIVED_IT
* @retval LAN8742_STATUS_OK if OK
* LAN8742_STATUS_READ_ERROR if connot read register
* LAN8742_STATUS_WRITE_ERROR if connot write to register
*/
static int32_t LAN8742_EnableIT(lan8742_Object_t *pObj, uint32_t Interrupt)
{
uint32_t readval = 0;
int32_t status = LAN8742_STATUS_OK;
if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_REG_IM, &readval) >= 0)
{
readval |= Interrupt;
/* Apply configuration */
if(pObj->IO.WriteReg(pObj->DevAddr, LAN8742_REG_IM, readval) < 0)
{
status = LAN8742_STATUS_WRITE_ERROR;
}
}
else
{
status = LAN8742_STATUS_READ_ERROR;
}
return status;
}
/**
* @brief Disable IT source.
* @param pObj: Pointer to device object.
* @param Interrupt: IT source to be disabled
* should be a value or a combination of the following:
* LAN8742_WOL_IT
* LAN8742_ENERGYON_IT
* LAN8742_AUTONEGO_COMPLETE_IT
* LAN8742_REMOTE_FAULT_IT
* LAN8742_LINK_DOWN_IT
* LAN8742_AUTONEGO_LP_ACK_IT
* LAN8742_PARALLEL_DETECTION_FAULT_IT
* LAN8742_AUTONEGO_PAGE_RECEIVED_IT
* @retval LAN8742_STATUS_OK if OK
* LAN8742_STATUS_READ_ERROR if connot read register
* LAN8742_STATUS_WRITE_ERROR if connot write to register
*/
static int32_t LAN8742_DisableIT(lan8742_Object_t *pObj, uint32_t Interrupt)
{
uint32_t readval = 0;
int32_t status = LAN8742_STATUS_OK;
if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_REG_IM, &readval) >= 0)
{
readval &= ~Interrupt;
/* Apply configuration */
if(pObj->IO.WriteReg(pObj->DevAddr, LAN8742_REG_IM, readval) < 0)
{
status = LAN8742_STATUS_WRITE_ERROR;
}
}
else
{
status = LAN8742_STATUS_READ_ERROR;
}
return status;
}
/**
* @brief Clear IT flag.
* @param pObj: Pointer to device object.
* @param Interrupt: IT flag to be cleared
* should be a value or a combination of the following:
* LAN8742_WOL_IT
* LAN8742_ENERGYON_IT
* LAN8742_AUTONEGO_COMPLETE_IT
* LAN8742_REMOTE_FAULT_IT
* LAN8742_LINK_DOWN_IT
* LAN8742_AUTONEGO_LP_ACK_IT
* LAN8742_PARALLEL_DETECTION_FAULT_IT
* LAN8742_AUTONEGO_PAGE_RECEIVED_IT
* @retval LAN8742_STATUS_OK if OK
* LAN8742_STATUS_READ_ERROR if connot read register
*/
static int32_t LAN8742_ClearIT(lan8742_Object_t *pObj, uint32_t Interrupt)
{
uint32_t readval = 0;
int32_t status = LAN8742_STATUS_OK;
if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_REG_ISF, &readval) < 0)
{
status = LAN8742_STATUS_READ_ERROR;
}
return status;
}
/**
* @brief Get IT Flag status.
* @param pObj: Pointer to device object.
* @param Interrupt: IT Flag to be checked,
* should be a value or a combination of the following:
* LAN8742_WOL_IT
* LAN8742_ENERGYON_IT
* LAN8742_AUTONEGO_COMPLETE_IT
* LAN8742_REMOTE_FAULT_IT
* LAN8742_LINK_DOWN_IT
* LAN8742_AUTONEGO_LP_ACK_IT
* LAN8742_PARALLEL_DETECTION_FAULT_IT
* LAN8742_AUTONEGO_PAGE_RECEIVED_IT
* @retval 1 IT flag is SET
* 0 IT flag is RESET
* LAN8742_STATUS_READ_ERROR if connot read register
*/
static int32_t LAN8742_GetITStatus(lan8742_Object_t *pObj, uint32_t Interrupt)
{
uint32_t readval = 0;
int32_t status = 0;
if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_REG_ISF, &readval) >= 0)
{
status = ((readval & Interrupt) == Interrupt);
}
else
{
status = LAN8742_STATUS_READ_ERROR;
}
return status;
}
static rt_err_t rt_lan8742_init(rt_device_t dev)
{
return RT_EOK;
}
static rt_err_t rt_lan8742_open(rt_device_t dev, rt_uint16_t oflag)
{
return RT_EOK;
}
static rt_err_t rt_lan8742_close(rt_device_t dev)
{
LAN8742_DeInit(&LAN8742);
LAN8742_DisableIT(&LAN8742, LAN8742_INT_ALL);
LAN8742_EnablePowerDownMode(&LAN8742);
return RT_EOK;
}
static rt_size_t rt_lan8742_read(rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size)
{
rt_set_errno(-RT_ENOSYS);
return 0;
}
static rt_size_t rt_lan8742_write (rt_device_t dev, rt_off_t pos, const void* buffer, rt_size_t size)
{
rt_set_errno(-RT_ENOSYS);
return 0;
}
static rt_err_t rt_lan8742_control(rt_device_t dev, rt_uint8_t cmd, void *args)
{
switch (cmd)
{
case NIOCTL_GADDR:
/* get mac address */
if (args)
rt_memcpy(args, lan8742_device.dev_addr, 6);
else
return -RT_ERROR;
break;
default :
break;
}
return RT_EOK;
}
/* ethernet device interface */
/* transmit packet. */
rt_err_t rt_lan8742_tx( rt_device_t dev, struct pbuf* p)
{
uint32_t i=0, framelen = 0;
struct pbuf *q;
err_t errval = ERR_OK;
ETH_BufferTypeDef Txbuffer[ETH_TX_DESC_CNT];
/* lock LAN8742 device */
rt_sem_take(&sem_lock, RT_WAITING_FOREVER);
memset(Txbuffer, 0 , 4*sizeof(ETH_BufferTypeDef));
for(q = p; q != NULL; q = q->next)
{
if(i >= ETH_TX_DESC_CNT)
return ERR_IF;
Txbuffer[i].buffer = q->payload;
Txbuffer[i].len = q->len;
framelen += q->len;
if(i>0)
{
Txbuffer[i-1].next = &Txbuffer[i];
}
i++;
}
TxConfig.Length = framelen;
TxConfig.TxBuffer = Txbuffer;
/* Clean and Invalidate data cache */
SCB_CleanInvalidateDCache();
HAL_ETH_Transmit(&EthHandle, &TxConfig, 0);//Transmit an ETH frame in blocking mode
/* unlock LAN8742 device */
rt_sem_release(&sem_lock);
return errval;
}
/* reception packet. */
struct pbuf *rt_lan8742_rx(rt_device_t dev)
{
struct pbuf* p = RT_NULL;
ETH_BufferTypeDef RxBuff;
uint32_t framelength = 0;
/* lock LAN8742 device */
rt_sem_take(&sem_lock, RT_WAITING_FOREVER);
/* Clean and Invalidate data cache */
SCB_CleanInvalidateDCache();
if(HAL_ETH_GetRxDataBuffer(&EthHandle, &RxBuff) == HAL_OK)
{
HAL_ETH_GetRxDataLength(&EthHandle, &framelength);
p = pbuf_alloced_custom(PBUF_RAW, framelength, PBUF_POOL, &rx_pbuf[current_pbuf_idx], RxBuff.buffer, framelength);
if(current_pbuf_idx < (ETH_RX_DESC_CNT -1))
{
current_pbuf_idx++;
}
else
{
current_pbuf_idx = 0;
}
}
HAL_ETH_BuildRxDescriptors(&EthHandle);
/* unlock LAN8742 device */
rt_sem_release(&sem_lock);
return p;
}
/**
* @brief Custom Rx pbuf free callback
* @param pbuf: pbuf to be freed
* @retval None
*/
static void pbuf_free_custom(struct pbuf *p)
{
if(p != NULL)
{
p->flags = 0;
p->next = NULL;
p->len = p->tot_len = 0;
p->ref = 0;
p->payload = NULL;
}
}
int rt_hw_lan8742a_init(void)
{
uint32_t idx, duplex, speed = 0;
int32_t PHYLinkState;
ETH_MACConfigTypeDef MACConf;
uint8_t macaddress[6]= {ETH_MAC_ADDR0, ETH_MAC_ADDR1, ETH_MAC_ADDR2,
ETH_MAC_ADDR3, ETH_MAC_ADDR4, ETH_MAC_ADDR5};
EthHandle.Instance = ETH;
EthHandle.Init.MACAddr = macaddress;
EthHandle.Init.MediaInterface = HAL_ETH_RMII_MODE;
EthHandle.Init.RxDesc = DMARxDscrTab;
EthHandle.Init.TxDesc = DMATxDscrTab;
EthHandle.Init.RxBuffLen = ETH_MAX_PACKET_SIZE;
/* configure ethernet peripheral (GPIOs, clocks, MAC, DMA) */
HAL_ETH_Init(&EthHandle);
for(idx = 0; idx < ETH_RX_DESC_CNT; idx ++)
{
HAL_ETH_DescAssignMemory(&EthHandle, idx, Rx_Buff[idx], NULL);
/* Set Custom pbuf free function */
rx_pbuf[idx].custom_free_function = pbuf_free_custom;
}
memset(&TxConfig, 0 , sizeof(ETH_TxPacketConfig));
TxConfig.Attributes = ETH_TX_PACKETS_FEATURES_CSUM | ETH_TX_PACKETS_FEATURES_CRCPAD;
TxConfig.ChecksumCtrl = ETH_CHECKSUM_IPHDR_PAYLOAD_INSERT_PHDR_CALC;
TxConfig.CRCPadCtrl = ETH_CRC_PAD_INSERT;
/* Initialize the LAN8742 ETH PHY */
LAN8742_Init(&LAN8742);
/* Get link state */
PHYLinkState = LAN8742_GetLinkState(&LAN8742);
/* Get link state */
if(PHYLinkState <= LAN8742_STATUS_LINK_DOWN)
{
//
}
else
{
switch (PHYLinkState)
{
case LAN8742_STATUS_100MBITS_FULLDUPLEX:
duplex = ETH_FULLDUPLEX_MODE;
speed = ETH_SPEED_100M;
break;
case LAN8742_STATUS_100MBITS_HALFDUPLEX:
duplex = ETH_HALFDUPLEX_MODE;
speed = ETH_SPEED_100M;
break;
case LAN8742_STATUS_10MBITS_FULLDUPLEX:
duplex = ETH_FULLDUPLEX_MODE;
speed = ETH_SPEED_10M;
break;
case LAN8742_STATUS_10MBITS_HALFDUPLEX:
duplex = ETH_HALFDUPLEX_MODE;
speed = ETH_SPEED_10M;
break;
default:
duplex = ETH_FULLDUPLEX_MODE;
speed = ETH_SPEED_100M;
break;
}
/* Get MAC Config MAC */
HAL_ETH_GetMACConfig(&EthHandle, &MACConf);
MACConf.DuplexMode = duplex;
MACConf.Speed = speed;
HAL_ETH_SetMACConfig(&EthHandle, &MACConf);
HAL_ETH_Start_IT(&EthHandle);
}
rt_sem_init(&sem_lock, "eth_lock", 1, RT_IPC_FLAG_FIFO);
rt_memcpy(lan8742_device.dev_addr, macaddress, 6);
lan8742_device.parent.parent.init = rt_lan8742_init;
lan8742_device.parent.parent.open = rt_lan8742_open;
lan8742_device.parent.parent.close = rt_lan8742_close;
lan8742_device.parent.parent.read = rt_lan8742_read;
lan8742_device.parent.parent.write = rt_lan8742_write;
lan8742_device.parent.parent.control = rt_lan8742_control;
lan8742_device.parent.parent.user_data = RT_NULL;
lan8742_device.parent.eth_rx = rt_lan8742_rx;
lan8742_device.parent.eth_tx = rt_lan8742_tx;
eth_device_init(&(lan8742_device.parent), "e0");
return 0;
}
INIT_DEVICE_EXPORT(rt_hw_lan8742a_init);
#ifdef RT_USING_LWIP
/**
* @brief This function handles Ethernet interrupt request.
* @param None
* @retval None
*/
void ETH_IRQHandler(void)
{
HAL_ETH_IRQHandler(&EthHandle);
}
#endif /* RT_USING_LWIP */
/**
* @brief Ethernet Rx Transfer completed callback
* @param heth: ETH handle
* @retval None
*/
void HAL_ETH_RxCpltCallback(ETH_HandleTypeDef *heth)
{
/* a frame has been received */
eth_device_ready(&(lan8742_device.parent));
}