227 lines
9.7 KiB
C
227 lines
9.7 KiB
C
|
/*
|
||
|
|
* Copyright (c) 2015, Freescale Semiconductor, Inc.
|
||
|
|
* Copyright 2016-2017 NXP
|
||
|
|
*
|
||
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
||
|
|
* are permitted provided that the following conditions are met:
|
||
|
|
*
|
||
|
|
* o Redistributions of source code must retain the above copyright notice, this list
|
||
|
|
* of conditions and the following disclaimer.
|
||
|
|
*
|
||
|
|
* o Redistributions in binary form must reproduce the above copyright notice, this
|
||
|
|
* list of conditions and the following disclaimer in the documentation and/or
|
||
|
|
* other materials provided with the distribution.
|
||
|
|
*
|
||
|
|
* o Neither the name of the copyright holder nor the names of its
|
||
|
|
* contributors may be used to endorse or promote products derived from this
|
||
|
|
* software without specific prior written permission.
|
||
|
|
*
|
||
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
|
||
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||
|
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
|
||
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||
|
|
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
||
|
|
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||
|
|
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||
|
|
*/
|
||
|
|
#ifndef _FSL_PHY_H_
|
||
|
|
#define _FSL_PHY_H_
|
||
|
|
#include "rtconfig.h"
|
||
|
|
#include "fsl_enet.h"
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @addtogroup phy_driver
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/*******************************************************************************
|
||
|
|
* Definitions
|
||
|
|
******************************************************************************/
|
||
|
|
|
||
|
|
/*! @brief PHY driver version */
|
||
|
|
#define FSL_PHY_DRIVER_VERSION (MAKE_VERSION(2, 0, 0)) /*!< Version 2.0.0. */
|
||
|
|
|
||
|
|
/*! @brief Defines the PHY registers. */
|
||
|
|
#define PHY_BASICCONTROL_REG 0x00U /*!< The PHY basic control register. */
|
||
|
|
#define PHY_BASICSTATUS_REG 0x01U /*!< The PHY basic status register. */
|
||
|
|
#define PHY_ID1_REG 0x02U /*!< The PHY ID one register. */
|
||
|
|
#define PHY_ID2_REG 0x03U /*!< The PHY ID two register. */
|
||
|
|
#define PHY_AUTONEG_ADVERTISE_REG 0x04U /*!< The PHY auto-negotiate advertise register. */
|
||
|
|
#define PHY_CONTROL1_REG 0x1EU /*!< The PHY control one register. */
|
||
|
|
#define PHY_CONTROL2_REG 0x1FU /*!< The PHY control two register. */
|
||
|
|
|
||
|
|
#if defined(BOARD_RT1021_EVK)
|
||
|
|
#define PHY_CONTROL_ID1 0x22U /*!< The PHY ID1*/
|
||
|
|
#endif
|
||
|
|
/*! @brief Defines the mask flag in basic control register. */
|
||
|
|
#define PHY_BCTL_DUPLEX_MASK 0x0100U /*!< The PHY duplex bit mask. */
|
||
|
|
#define PHY_BCTL_RESTART_AUTONEG_MASK 0x0200U /*!< The PHY restart auto negotiation mask. */
|
||
|
|
#define PHY_BCTL_AUTONEG_MASK 0x1000U /*!< The PHY auto negotiation bit mask. */
|
||
|
|
#define PHY_BCTL_SPEED_MASK 0x2000U /*!< The PHY speed bit mask. */
|
||
|
|
#define PHY_BCTL_LOOP_MASK 0x4000U /*!< The PHY loop bit mask. */
|
||
|
|
#define PHY_BCTL_RESET_MASK 0x8000U /*!< The PHY reset bit mask. */
|
||
|
|
#define PHY_BCTL_SPEED_100M_MASK 0x2000U /*!< The PHY 100M speed mask. */
|
||
|
|
#define PHY_BCTL_POWER_DOWN_MASK 0x800U /*!< The PHY Power Down mask. */
|
||
|
|
|
||
|
|
|
||
|
|
/*!@brief Defines the mask flag of operation mode in control two register*/
|
||
|
|
#if defined(BOARD_RT1021_EVK)
|
||
|
|
#define PHY_CTL2_REMOTELOOP_MASK 0x0004U /*!< The PHY remote loopback mask. */
|
||
|
|
#define PHY_CTL2_REFCLK_SELECT_MASK 0x0080U /*!< The PHY RMII reference clock select. */
|
||
|
|
#define PHY_CTL1_10HALFDUPLEX_MASK 0x0001U /*!< The PHY 10M half duplex mask. */
|
||
|
|
#define PHY_CTL1_100HALFDUPLEX_MASK 0x0002U /*!< The PHY 100M half duplex mask. */
|
||
|
|
#define PHY_CTL1_10FULLDUPLEX_MASK 0x0005U /*!< The PHY 10M full duplex mask. */
|
||
|
|
#define PHY_CTL1_100FULLDUPLEX_MASK 0x0006U /*!< The PHY 100M full duplex mask. */
|
||
|
|
#define PHY_CTL1_SPEEDUPLX_MASK 0x0007U /*!< The PHY speed and duplex mask. */
|
||
|
|
#define PHY_CTL1_ENERGYDETECT_MASK 0x10U /*!< The PHY signal present on rx differential pair. */
|
||
|
|
#define PHY_CTL1_LINKUP_MASK 0x100U /*!< The PHY link up. */
|
||
|
|
#define PHY_LINK_READY_MASK (PHY_CTL1_ENERGYDETECT_MASK | PHY_CTL1_LINKUP_MASK)
|
||
|
|
#endif
|
||
|
|
/*! @brief Defines the mask flag in basic status register. */
|
||
|
|
#define PHY_BSTATUS_LINKSTATUS_MASK 0x0004U /*!< The PHY link status mask. */
|
||
|
|
#define PHY_BSTATUS_AUTONEGABLE_MASK 0x0008U /*!< The PHY auto-negotiation ability mask. */
|
||
|
|
#define PHY_BSTATUS_AUTONEGCOMP_MASK 0x0020U /*!< The PHY auto-negotiation complete mask. */
|
||
|
|
|
||
|
|
/*! @brief Defines the mask flag in PHY auto-negotiation advertise register. */
|
||
|
|
#define PHY_100BaseT4_ABILITY_MASK 0x200U /*!< The PHY have the T4 ability. */
|
||
|
|
#define PHY_100BASETX_FULLDUPLEX_MASK 0x100U /*!< The PHY has the 100M full duplex ability.*/
|
||
|
|
#define PHY_100BASETX_HALFDUPLEX_MASK 0x080U /*!< The PHY has the 100M full duplex ability.*/
|
||
|
|
#define PHY_10BASETX_FULLDUPLEX_MASK 0x040U /*!< The PHY has the 10M full duplex ability.*/
|
||
|
|
#define PHY_10BASETX_HALFDUPLEX_MASK 0x020U /*!< The PHY has the 10M full duplex ability.*/
|
||
|
|
|
||
|
|
/*! @brief Defines the PHY status. */
|
||
|
|
enum _phy_status
|
||
|
|
{
|
||
|
|
kStatus_PHY_SMIVisitTimeout = MAKE_STATUS(kStatusGroup_PHY, 1), /*!< ENET PHY SMI visit timeout. */
|
||
|
|
kStatus_PHY_AutoNegotiateFail = MAKE_STATUS(kStatusGroup_PHY, 2) /*!< ENET PHY AutoNegotiate Fail. */
|
||
|
|
};
|
||
|
|
|
||
|
|
/*! @brief Defines the PHY link speed. This is align with the speed for ENET MAC. */
|
||
|
|
typedef enum _phy_speed
|
||
|
|
{
|
||
|
|
kPHY_Speed10M = 0U, /*!< ENET PHY 10M speed. */
|
||
|
|
kPHY_Speed100M /*!< ENET PHY 100M speed. */
|
||
|
|
} phy_speed_t;
|
||
|
|
|
||
|
|
/*! @brief Defines the PHY link duplex. */
|
||
|
|
typedef enum _phy_duplex
|
||
|
|
{
|
||
|
|
kPHY_HalfDuplex = 0U, /*!< ENET PHY half duplex. */
|
||
|
|
kPHY_FullDuplex /*!< ENET PHY full duplex. */
|
||
|
|
} phy_duplex_t;
|
||
|
|
|
||
|
|
/*! @brief Defines the PHY loopback mode. */
|
||
|
|
typedef enum _phy_loop
|
||
|
|
{
|
||
|
|
kPHY_LocalLoop = 0U, /*!< ENET PHY local loopback. */
|
||
|
|
kPHY_RemoteLoop /*!< ENET PHY remote loopback. */
|
||
|
|
} phy_loop_t;
|
||
|
|
|
||
|
|
/*******************************************************************************
|
||
|
|
* API
|
||
|
|
******************************************************************************/
|
||
|
|
|
||
|
|
#if defined(__cplusplus)
|
||
|
|
extern "C" {
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @name PHY Driver
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @brief Initializes PHY.
|
||
|
|
*
|
||
|
|
* This function initialize the SMI interface and initialize PHY.
|
||
|
|
* The SMI is the MII management interface between PHY and MAC, which should be
|
||
|
|
* firstly initialized before any other operation for PHY. The PHY initialize with auto-negotiation.
|
||
|
|
*
|
||
|
|
* @param base ENET peripheral base address.
|
||
|
|
* @param phyAddr The PHY address.
|
||
|
|
* @param srcClock_Hz The module clock frequency - system clock for MII management interface - SMI.
|
||
|
|
* @retval kStatus_Success PHY initialize success
|
||
|
|
* @retval kStatus_PHY_SMIVisitTimeout PHY SMI visit time out
|
||
|
|
* @retval kStatus_PHY_AutoNegotiateFail PHY auto negotiate fail
|
||
|
|
*/
|
||
|
|
status_t PHY_Init(ENET_Type *base, uint32_t phyAddr, uint32_t srcClock_Hz);
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @brief PHY Write function. This function write data over the SMI to
|
||
|
|
* the specified PHY register. This function is called by all PHY interfaces.
|
||
|
|
*
|
||
|
|
* @param base ENET peripheral base address.
|
||
|
|
* @param phyAddr The PHY address.
|
||
|
|
* @param phyReg The PHY register.
|
||
|
|
* @param data The data written to the PHY register.
|
||
|
|
* @retval kStatus_Success PHY write success
|
||
|
|
* @retval kStatus_PHY_SMIVisitTimeout PHY SMI visit time out
|
||
|
|
*/
|
||
|
|
status_t PHY_Write(ENET_Type *base, uint32_t phyAddr, uint32_t phyReg, uint32_t data);
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @brief PHY Read function. This interface read data over the SMI from the
|
||
|
|
* specified PHY register. This function is called by all PHY interfaces.
|
||
|
|
*
|
||
|
|
* @param base ENET peripheral base address.
|
||
|
|
* @param phyAddr The PHY address.
|
||
|
|
* @param phyReg The PHY register.
|
||
|
|
* @param dataPtr The address to store the data read from the PHY register.
|
||
|
|
* @retval kStatus_Success PHY read success
|
||
|
|
* @retval kStatus_PHY_SMIVisitTimeout PHY SMI visit time out
|
||
|
|
*/
|
||
|
|
status_t PHY_Read(ENET_Type *base, uint32_t phyAddr, uint32_t phyReg, uint32_t *dataPtr);
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @brief Enables/disables PHY loopback.
|
||
|
|
*
|
||
|
|
* @param base ENET peripheral base address.
|
||
|
|
* @param phyAddr The PHY address.
|
||
|
|
* @param mode The loopback mode to be enabled, please see "phy_loop_t".
|
||
|
|
* the two loopback mode should not be both set. when one loopback mode is set
|
||
|
|
* the other one should be disabled.
|
||
|
|
* @param speed PHY speed for loopback mode.
|
||
|
|
* @param enable True to enable, false to disable.
|
||
|
|
* @retval kStatus_Success PHY loopback success
|
||
|
|
* @retval kStatus_PHY_SMIVisitTimeout PHY SMI visit time out
|
||
|
|
*/
|
||
|
|
status_t PHY_EnableLoopback(ENET_Type *base, uint32_t phyAddr, phy_loop_t mode, phy_speed_t speed, bool enable);
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @brief Gets the PHY link status.
|
||
|
|
*
|
||
|
|
* @param base ENET peripheral base address.
|
||
|
|
* @param phyAddr The PHY address.
|
||
|
|
* @param status The link up or down status of the PHY.
|
||
|
|
* - true the link is up.
|
||
|
|
* - false the link is down.
|
||
|
|
* @retval kStatus_Success PHY get link status success
|
||
|
|
* @retval kStatus_PHY_SMIVisitTimeout PHY SMI visit time out
|
||
|
|
*/
|
||
|
|
status_t PHY_GetLinkStatus(ENET_Type *base, uint32_t phyAddr, bool *status);
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @brief Gets the PHY link speed and duplex.
|
||
|
|
*
|
||
|
|
* @param base ENET peripheral base address.
|
||
|
|
* @param phyAddr The PHY address.
|
||
|
|
* @param speed The address of PHY link speed.
|
||
|
|
* @param duplex The link duplex of PHY.
|
||
|
|
* @retval kStatus_Success PHY get link speed and duplex success
|
||
|
|
* @retval kStatus_PHY_SMIVisitTimeout PHY SMI visit time out
|
||
|
|
*/
|
||
|
|
status_t PHY_GetLinkSpeedDuplex(ENET_Type *base, uint32_t phyAddr, phy_speed_t *speed, phy_duplex_t *duplex);
|
||
|
|
|
||
|
|
/* @} */
|
||
|
|
|
||
|
|
#if defined(__cplusplus)
|
||
|
|
}
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/*! @}*/
|
||
|
|
|
||
|
|
#endif /* _FSL_PHY_H_ */
|