329 lines
22 KiB
C
329 lines
22 KiB
C
|
/*!
|
||
|
|
\file gd32f10x_spi.h
|
||
|
|
\brief definitions for the SPI
|
||
|
|
|
||
|
|
\version 2014-12-26, V1.0.0, firmware for GD32F10x
|
||
|
|
\version 2017-06-20, V2.0.0, firmware for GD32F10x
|
||
|
|
\version 2018-07-31, V2.1.0, firmware for GD32F10x
|
||
|
|
*/
|
||
|
|
|
||
|
|
/*
|
||
|
|
Copyright (c) 2018, GigaDevice Semiconductor Inc.
|
||
|
|
|
||
|
|
All rights reserved.
|
||
|
|
|
||
|
|
Redistribution and use in source and binary forms, with or without modification,
|
||
|
|
are permitted provided that the following conditions are met:
|
||
|
|
|
||
|
|
1. Redistributions of source code must retain the above copyright notice, this
|
||
|
|
list of conditions and the following disclaimer.
|
||
|
|
2. Redistributions in binary form must reproduce the above copyright notice,
|
||
|
|
this list of conditions and the following disclaimer in the documentation
|
||
|
|
and/or other materials provided with the distribution.
|
||
|
|
3. Neither the name of the copyright holder nor the names of its contributors
|
||
|
|
may be used to endorse or promote products derived from this software without
|
||
|
|
specific prior written permission.
|
||
|
|
|
||
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||
|
|
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||
|
|
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||
|
|
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
|
||
|
|
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||
|
|
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
|
||
|
|
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||
|
|
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
|
||
|
|
OF SUCH DAMAGE.
|
||
|
|
*/
|
||
|
|
|
||
|
|
#ifndef GD32F10X_SPI_H
|
||
|
|
#define GD32F10X_SPI_H
|
||
|
|
|
||
|
|
#include "gd32f10x.h"
|
||
|
|
|
||
|
|
/* SPIx(x=0,1,2) definitions */
|
||
|
|
#define SPI0 (SPI_BASE + 0x0000F800U)
|
||
|
|
#define SPI1 SPI_BASE
|
||
|
|
#define SPI2 (SPI_BASE + 0x00000400U)
|
||
|
|
|
||
|
|
/* SPI registers definitions */
|
||
|
|
#define SPI_CTL0(spix) REG32((spix) + 0x00U) /*!< SPI control register 0 */
|
||
|
|
#define SPI_CTL1(spix) REG32((spix) + 0x04U) /*!< SPI control register 1*/
|
||
|
|
#define SPI_STAT(spix) REG32((spix) + 0x08U) /*!< SPI status register */
|
||
|
|
#define SPI_DATA(spix) REG32((spix) + 0x0CU) /*!< SPI data register */
|
||
|
|
#define SPI_CRCPOLY(spix) REG32((spix) + 0x10U) /*!< SPI CRC polynomial register */
|
||
|
|
#define SPI_RCRC(spix) REG32((spix) + 0x14U) /*!< SPI receive CRC register */
|
||
|
|
#define SPI_TCRC(spix) REG32((spix) + 0x18U) /*!< SPI transmit CRC register */
|
||
|
|
#define SPI_I2SCTL(spix) REG32((spix) + 0x1CU) /*!< SPI I2S control register */
|
||
|
|
#define SPI_I2SPSC(spix) REG32((spix) + 0x20U) /*!< SPI I2S clock prescaler register */
|
||
|
|
|
||
|
|
/* bits definitions */
|
||
|
|
/* SPI_CTL0 */
|
||
|
|
#define SPI_CTL0_CKPH BIT(0) /*!< clock phase selection*/
|
||
|
|
#define SPI_CTL0_CKPL BIT(1) /*!< clock polarity selection */
|
||
|
|
#define SPI_CTL0_MSTMOD BIT(2) /*!< master mode enable */
|
||
|
|
#define SPI_CTL0_PSC BITS(3,5) /*!< master clock prescaler selection */
|
||
|
|
#define SPI_CTL0_SPIEN BIT(6) /*!< SPI enable*/
|
||
|
|
#define SPI_CTL0_LF BIT(7) /*!< LSB first mode */
|
||
|
|
#define SPI_CTL0_SWNSS BIT(8) /*!< NSS pin selection in NSS software mode */
|
||
|
|
#define SPI_CTL0_SWNSSEN BIT(9) /*!< NSS software mode selection */
|
||
|
|
#define SPI_CTL0_RO BIT(10) /*!< receive only */
|
||
|
|
#define SPI_CTL0_FF16 BIT(11) /*!< data frame size */
|
||
|
|
#define SPI_CTL0_CRCNT BIT(12) /*!< CRC next transfer */
|
||
|
|
#define SPI_CTL0_CRCEN BIT(13) /*!< CRC calculation enable */
|
||
|
|
#define SPI_CTL0_BDOEN BIT(14) /*!< bidirectional transmit output enable*/
|
||
|
|
#define SPI_CTL0_BDEN BIT(15) /*!< bidirectional enable */
|
||
|
|
|
||
|
|
/* SPI_CTL1 */
|
||
|
|
#define SPI_CTL1_DMAREN BIT(0) /*!< receive buffer dma enable */
|
||
|
|
#define SPI_CTL1_DMATEN BIT(1) /*!< transmit buffer dma enable */
|
||
|
|
#define SPI_CTL1_NSSDRV BIT(2) /*!< drive NSS output */
|
||
|
|
#define SPI_CTL1_ERRIE BIT(5) /*!< errors interrupt enable */
|
||
|
|
#define SPI_CTL1_RBNEIE BIT(6) /*!< receive buffer not empty interrupt enable */
|
||
|
|
#define SPI_CTL1_TBEIE BIT(7) /*!< transmit buffer empty interrupt enable */
|
||
|
|
|
||
|
|
/* SPI_STAT */
|
||
|
|
#define SPI_STAT_RBNE BIT(0) /*!< receive buffer not empty */
|
||
|
|
#define SPI_STAT_TBE BIT(1) /*!< transmit buffer empty */
|
||
|
|
#define SPI_STAT_I2SCH BIT(2) /*!< I2S channel side */
|
||
|
|
#define SPI_STAT_TXURERR BIT(3) /*!< I2S transmission underrun error bit */
|
||
|
|
#define SPI_STAT_CRCERR BIT(4) /*!< SPI CRC error bit */
|
||
|
|
#define SPI_STAT_CONFERR BIT(5) /*!< SPI configuration error bit */
|
||
|
|
#define SPI_STAT_RXORERR BIT(6) /*!< SPI reception overrun error bit */
|
||
|
|
#define SPI_STAT_TRANS BIT(7) /*!< transmitting on-going bit */
|
||
|
|
|
||
|
|
/* SPI_DATA */
|
||
|
|
#define SPI_DATA_DATA BITS(0,15) /*!< data transfer register */
|
||
|
|
|
||
|
|
/* SPI_CRCPOLY */
|
||
|
|
#define SPI_CRCPOLY_CPR BITS(0,15) /*!< CRC polynomial value */
|
||
|
|
|
||
|
|
/* SPI_RCRC */
|
||
|
|
#define SPI_RCRC_RCR BITS(0,15) /*!< RX CRC value */
|
||
|
|
|
||
|
|
/* SPI_TCRC */
|
||
|
|
#define SPI_TCRC_TCR BITS(0,15) /*!< TX CRC value */
|
||
|
|
|
||
|
|
/* SPI_I2SCTL */
|
||
|
|
#define SPI_I2SCTL_CHLEN BIT(0) /*!< channel length */
|
||
|
|
#define SPI_I2SCTL_DTLEN BITS(1,2) /*!< data length */
|
||
|
|
#define SPI_I2SCTL_CKPL BIT(3) /*!< idle state clock polarity */
|
||
|
|
#define SPI_I2SCTL_I2SSTD BITS(4,5) /*!< I2S standard selection */
|
||
|
|
#define SPI_I2SCTL_PCMSMOD BIT(7) /*!< PCM frame synchronization mode */
|
||
|
|
#define SPI_I2SCTL_I2SOPMOD BITS(8,9) /*!< I2S operation mode */
|
||
|
|
#define SPI_I2SCTL_I2SEN BIT(10) /*!< I2S enable */
|
||
|
|
#define SPI_I2SCTL_I2SSEL BIT(11) /*!< I2S mode selection */
|
||
|
|
|
||
|
|
/* SPI_I2SPSC */
|
||
|
|
#define SPI_I2SPSC_DIV BITS(0,7) /*!< dividing factor for the prescaler */
|
||
|
|
#define SPI_I2SPSC_OF BIT(8) /*!< odd factor for the prescaler */
|
||
|
|
#define SPI_I2SPSC_MCKOEN BIT(9) /*!< I2S MCK output enable */
|
||
|
|
|
||
|
|
/* constants definitions */
|
||
|
|
/* SPI and I2S parameter struct definitions */
|
||
|
|
typedef struct
|
||
|
|
{
|
||
|
|
uint32_t device_mode; /*!< SPI master or slave */
|
||
|
|
uint32_t trans_mode; /*!< SPI transtype */
|
||
|
|
uint32_t frame_size; /*!< SPI frame size */
|
||
|
|
uint32_t nss; /*!< SPI NSS control by handware or software */
|
||
|
|
uint32_t endian; /*!< SPI big endian or little endian */
|
||
|
|
uint32_t clock_polarity_phase; /*!< SPI clock phase and polarity */
|
||
|
|
uint32_t prescale; /*!< SPI prescale factor */
|
||
|
|
}spi_parameter_struct;
|
||
|
|
|
||
|
|
/* SPI mode definitions */
|
||
|
|
#define SPI_MASTER (SPI_CTL0_MSTMOD | SPI_CTL0_SWNSS) /*!< SPI as master */
|
||
|
|
#define SPI_SLAVE ((uint32_t)0x00000000U) /*!< SPI as slave */
|
||
|
|
|
||
|
|
/* SPI bidirectional transfer direction */
|
||
|
|
#define SPI_BIDIRECTIONAL_TRANSMIT SPI_CTL0_BDOEN /*!< SPI work in transmit-only mode */
|
||
|
|
#define SPI_BIDIRECTIONAL_RECEIVE (~SPI_CTL0_BDOEN) /*!< SPI work in receive-only mode */
|
||
|
|
|
||
|
|
/* SPI transmit type */
|
||
|
|
#define SPI_TRANSMODE_FULLDUPLEX ((uint32_t)0x00000000U) /*!< SPI receive and send data at fullduplex communication */
|
||
|
|
#define SPI_TRANSMODE_RECEIVEONLY SPI_CTL0_RO /*!< SPI only receive data */
|
||
|
|
#define SPI_TRANSMODE_BDRECEIVE SPI_CTL0_BDEN /*!< bidirectional receive data */
|
||
|
|
#define SPI_TRANSMODE_BDTRANSMIT (SPI_CTL0_BDEN | SPI_CTL0_BDOEN) /*!< bidirectional transmit data*/
|
||
|
|
|
||
|
|
/* SPI frame size */
|
||
|
|
#define SPI_FRAMESIZE_16BIT SPI_CTL0_FF16 /*!< SPI frame size is 16 bits */
|
||
|
|
#define SPI_FRAMESIZE_8BIT ((uint32_t)0x00000000U) /*!< SPI frame size is 8 bits */
|
||
|
|
|
||
|
|
/* SPI NSS control mode */
|
||
|
|
#define SPI_NSS_SOFT SPI_CTL0_SWNSSEN /*!< SPI NSS control by software */
|
||
|
|
#define SPI_NSS_HARD ((uint32_t)0x00000000U) /*!< SPI NSS control by hardware */
|
||
|
|
|
||
|
|
/* SPI transmit way */
|
||
|
|
#define SPI_ENDIAN_MSB ((uint32_t)0x00000000U) /*!< SPI transmit way is big endian: transmit MSB first */
|
||
|
|
#define SPI_ENDIAN_LSB SPI_CTL0_LF /*!< SPI transmit way is little endian: transmit LSB first */
|
||
|
|
|
||
|
|
/* SPI clock phase and polarity */
|
||
|
|
#define SPI_CK_PL_LOW_PH_1EDGE ((uint32_t)0x00000000U) /*!< SPI clock polarity is low level and phase is first edge */
|
||
|
|
#define SPI_CK_PL_HIGH_PH_1EDGE SPI_CTL0_CKPL /*!< SPI clock polarity is high level and phase is first edge */
|
||
|
|
#define SPI_CK_PL_LOW_PH_2EDGE SPI_CTL0_CKPH /*!< SPI clock polarity is low level and phase is second edge */
|
||
|
|
#define SPI_CK_PL_HIGH_PH_2EDGE (SPI_CTL0_CKPL | SPI_CTL0_CKPH) /*!< SPI clock polarity is high level and phase is second edge */
|
||
|
|
|
||
|
|
/* SPI clock prescale factor */
|
||
|
|
#define CTL0_PSC(regval) (BITS(3,5) & ((uint32_t)(regval) << 3))
|
||
|
|
#define SPI_PSC_2 CTL0_PSC(0) /*!< SPI clock prescale factor is 2 */
|
||
|
|
#define SPI_PSC_4 CTL0_PSC(1) /*!< SPI clock prescale factor is 4 */
|
||
|
|
#define SPI_PSC_8 CTL0_PSC(2) /*!< SPI clock prescale factor is 8 */
|
||
|
|
#define SPI_PSC_16 CTL0_PSC(3) /*!< SPI clock prescale factor is 16 */
|
||
|
|
#define SPI_PSC_32 CTL0_PSC(4) /*!< SPI clock prescale factor is 32 */
|
||
|
|
#define SPI_PSC_64 CTL0_PSC(5) /*!< SPI clock prescale factor is 64 */
|
||
|
|
#define SPI_PSC_128 CTL0_PSC(6) /*!< SPI clock prescale factor is 128 */
|
||
|
|
#define SPI_PSC_256 CTL0_PSC(7) /*!< SPI clock prescale factor is 256 */
|
||
|
|
|
||
|
|
/* I2S audio sample rate */
|
||
|
|
#define I2S_AUDIOSAMPLE_8K ((uint32_t)8000U) /*!< I2S audio sample rate is 8KHz */
|
||
|
|
#define I2S_AUDIOSAMPLE_11K ((uint32_t)11025U) /*!< I2S audio sample rate is 11KHz */
|
||
|
|
#define I2S_AUDIOSAMPLE_16K ((uint32_t)16000U) /*!< I2S audio sample rate is 16KHz */
|
||
|
|
#define I2S_AUDIOSAMPLE_22K ((uint32_t)22050U) /*!< I2S audio sample rate is 22KHz */
|
||
|
|
#define I2S_AUDIOSAMPLE_32K ((uint32_t)32000U) /*!< I2S audio sample rate is 32KHz */
|
||
|
|
#define I2S_AUDIOSAMPLE_44K ((uint32_t)44100U) /*!< I2S audio sample rate is 44KHz */
|
||
|
|
#define I2S_AUDIOSAMPLE_48K ((uint32_t)48000U) /*!< I2S audio sample rate is 48KHz */
|
||
|
|
#define I2S_AUDIOSAMPLE_96K ((uint32_t)96000U) /*!< I2S audio sample rate is 96KHz */
|
||
|
|
#define I2S_AUDIOSAMPLE_192K ((uint32_t)192000U) /*!< I2S audio sample rate is 192KHz */
|
||
|
|
|
||
|
|
/* I2S frame format */
|
||
|
|
#define I2SCTL_DTLEN(regval) (BITS(1,2) & ((uint32_t)(regval) << 1))
|
||
|
|
#define I2S_FRAMEFORMAT_DT16B_CH16B I2SCTL_DTLEN(0) /*!< I2S data length is 16 bit and channel length is 16 bit */
|
||
|
|
#define I2S_FRAMEFORMAT_DT16B_CH32B (I2SCTL_DTLEN(0) | SPI_I2SCTL_CHLEN) /*!< I2S data length is 16 bit and channel length is 32 bit */
|
||
|
|
#define I2S_FRAMEFORMAT_DT24B_CH32B (I2SCTL_DTLEN(1) | SPI_I2SCTL_CHLEN) /*!< I2S data length is 24 bit and channel length is 32 bit */
|
||
|
|
#define I2S_FRAMEFORMAT_DT32B_CH32B (I2SCTL_DTLEN(2) | SPI_I2SCTL_CHLEN) /*!< I2S data length is 32 bit and channel length is 32 bit */
|
||
|
|
|
||
|
|
/* I2S master clock output */
|
||
|
|
#define I2S_MCKOUT_DISABLE ((uint32_t)0x00000000U) /*!< I2S master clock output disable */
|
||
|
|
#define I2S_MCKOUT_ENABLE SPI_I2SPSC_MCKOEN /*!< I2S master clock output enable */
|
||
|
|
|
||
|
|
/* I2S operation mode */
|
||
|
|
#define I2SCTL_I2SOPMOD(regval) (BITS(8,9) & ((uint32_t)(regval) << 8))
|
||
|
|
#define I2S_MODE_SLAVETX I2SCTL_I2SOPMOD(0) /*!< I2S slave transmit mode */
|
||
|
|
#define I2S_MODE_SLAVERX I2SCTL_I2SOPMOD(1) /*!< I2S slave receive mode */
|
||
|
|
#define I2S_MODE_MASTERTX I2SCTL_I2SOPMOD(2) /*!< I2S master transmit mode */
|
||
|
|
#define I2S_MODE_MASTERRX I2SCTL_I2SOPMOD(3) /*!< I2S master receive mode */
|
||
|
|
|
||
|
|
/* I2S standard */
|
||
|
|
#define I2SCTL_I2SSTD(regval) (BITS(4,5) & ((uint32_t)(regval) << 4))
|
||
|
|
#define I2S_STD_PHILLIPS I2SCTL_I2SSTD(0) /*!< I2S phillips standard */
|
||
|
|
#define I2S_STD_MSB I2SCTL_I2SSTD(1) /*!< I2S MSB standard */
|
||
|
|
#define I2S_STD_LSB I2SCTL_I2SSTD(2) /*!< I2S LSB standard */
|
||
|
|
#define I2S_STD_PCMSHORT I2SCTL_I2SSTD(3) /*!< I2S PCM short standard */
|
||
|
|
#define I2S_STD_PCMLONG (I2SCTL_I2SSTD(3) | SPI_I2SCTL_PCMSMOD) /*!< I2S PCM long standard */
|
||
|
|
|
||
|
|
/* I2S clock polarity */
|
||
|
|
#define I2S_CKPL_LOW ((uint32_t)0x00000000U) /*!< I2S clock polarity low level */
|
||
|
|
#define I2S_CKPL_HIGH SPI_I2SCTL_CKPL /*!< I2S clock polarity high level */
|
||
|
|
|
||
|
|
/* SPI DMA constants definitions */
|
||
|
|
#define SPI_DMA_TRANSMIT ((uint8_t)0x00U) /*!< SPI transmit data use DMA */
|
||
|
|
#define SPI_DMA_RECEIVE ((uint8_t)0x01U) /*!< SPI receive data use DMA */
|
||
|
|
|
||
|
|
/* SPI CRC constants definitions */
|
||
|
|
#define SPI_CRC_TX ((uint8_t)0x00U) /*!< SPI transmit CRC value */
|
||
|
|
#define SPI_CRC_RX ((uint8_t)0x01U) /*!< SPI receive CRC value */
|
||
|
|
|
||
|
|
/* SPI/I2S interrupt enable/disable constants definitions */
|
||
|
|
#define SPI_I2S_INT_TBE ((uint8_t)0x00U) /*!< transmit buffer empty interrupt */
|
||
|
|
#define SPI_I2S_INT_RBNE ((uint8_t)0x01U) /*!< receive buffer not empty interrupt */
|
||
|
|
#define SPI_I2S_INT_ERR ((uint8_t)0x02U) /*!< error interrupt */
|
||
|
|
|
||
|
|
/* SPI/I2S interrupt flag constants definitions */
|
||
|
|
#define SPI_I2S_INT_FLAG_TBE ((uint8_t)0x00U) /*!< transmit buffer empty interrupt flag */
|
||
|
|
#define SPI_I2S_INT_FLAG_RBNE ((uint8_t)0x01U) /*!< receive buffer not empty interrupt flag */
|
||
|
|
#define SPI_I2S_INT_FLAG_RXORERR ((uint8_t)0x02U) /*!< overrun interrupt flag */
|
||
|
|
#define SPI_INT_FLAG_CONFERR ((uint8_t)0x03U) /*!< config error interrupt flag */
|
||
|
|
#define SPI_INT_FLAG_CRCERR ((uint8_t)0x04U) /*!< CRC error interrupt flag */
|
||
|
|
#define I2S_INT_FLAG_TXURERR ((uint8_t)0x05U) /*!< underrun error interrupt flag */
|
||
|
|
|
||
|
|
/* SPI/I2S flag definitions */
|
||
|
|
#define SPI_FLAG_RBNE SPI_STAT_RBNE /*!< receive buffer not empty flag */
|
||
|
|
#define SPI_FLAG_TBE SPI_STAT_TBE /*!< transmit buffer empty flag */
|
||
|
|
#define SPI_FLAG_CRCERR SPI_STAT_CRCERR /*!< CRC error flag */
|
||
|
|
#define SPI_FLAG_CONFERR SPI_STAT_CONFERR /*!< mode config error flag */
|
||
|
|
#define SPI_FLAG_RXORERR SPI_STAT_RXORERR /*!< receive overrun error flag */
|
||
|
|
#define SPI_FLAG_TRANS SPI_STAT_TRANS /*!< transmit on-going flag */
|
||
|
|
#define I2S_FLAG_RBNE SPI_STAT_RBNE /*!< receive buffer not empty flag */
|
||
|
|
#define I2S_FLAG_TBE SPI_STAT_TBE /*!< transmit buffer empty flag */
|
||
|
|
#define I2S_FLAG_CH SPI_STAT_I2SCH /*!< channel side flag */
|
||
|
|
#define I2S_FLAG_TXURERR SPI_STAT_TXURERR /*!< underrun error flag */
|
||
|
|
#define I2S_FLAG_RXORERR SPI_STAT_RXORERR /*!< overrun error flag */
|
||
|
|
#define I2S_FLAG_TRANS SPI_STAT_TRANS /*!< transmit on-going flag */
|
||
|
|
|
||
|
|
/* function declarations */
|
||
|
|
/* SPI/I2S deinitialization and initialization functions */
|
||
|
|
/* reset SPI and I2S */
|
||
|
|
void spi_i2s_deinit(uint32_t spi_periph);
|
||
|
|
/* initialize the parameters of SPI struct with the default values */
|
||
|
|
void spi_struct_para_init(spi_parameter_struct* spi_struct);
|
||
|
|
/* initialize SPI parameter */
|
||
|
|
void spi_init(uint32_t spi_periph, spi_parameter_struct* spi_struct);
|
||
|
|
/* enable SPI */
|
||
|
|
void spi_enable(uint32_t spi_periph);
|
||
|
|
/* disable SPI */
|
||
|
|
void spi_disable(uint32_t spi_periph);
|
||
|
|
|
||
|
|
/* initialize I2S parameter */
|
||
|
|
void i2s_init(uint32_t spi_periph,uint32_t mode, uint32_t standard, uint32_t ckpl);
|
||
|
|
/* configure I2S prescaler */
|
||
|
|
void i2s_psc_config(uint32_t spi_periph, uint32_t audiosample, uint32_t frameformat, uint32_t mckout);
|
||
|
|
/* enable I2S */
|
||
|
|
void i2s_enable(uint32_t spi_periph);
|
||
|
|
/* disable I2S */
|
||
|
|
void i2s_disable(uint32_t spi_periph);
|
||
|
|
|
||
|
|
/* NSS functions */
|
||
|
|
/* enable SPI NSS output */
|
||
|
|
void spi_nss_output_enable(uint32_t spi_periph);
|
||
|
|
/* disable SPI NSS output */
|
||
|
|
void spi_nss_output_disable(uint32_t spi_periph);
|
||
|
|
/* SPI NSS pin high level in software mode */
|
||
|
|
void spi_nss_internal_high(uint32_t spi_periph);
|
||
|
|
/* SPI NSS pin low level in software mode */
|
||
|
|
void spi_nss_internal_low(uint32_t spi_periph);
|
||
|
|
|
||
|
|
/* DMA communication */
|
||
|
|
/* enable SPI DMA */
|
||
|
|
void spi_dma_enable(uint32_t spi_periph, uint8_t dma);
|
||
|
|
/* disable SPI DMA */
|
||
|
|
void spi_dma_disable(uint32_t spi_periph, uint8_t dma);
|
||
|
|
|
||
|
|
/* normal mode communication */
|
||
|
|
/* configure SPI/I2S data frame format */
|
||
|
|
void spi_i2s_data_frame_format_config(uint32_t spi_periph, uint16_t frame_format);
|
||
|
|
/* SPI transmit data */
|
||
|
|
void spi_i2s_data_transmit(uint32_t spi_periph, uint16_t data);
|
||
|
|
/* SPI receive data */
|
||
|
|
uint16_t spi_i2s_data_receive(uint32_t spi_periph);
|
||
|
|
/* configure SPI bidirectional transfer direction */
|
||
|
|
void spi_bidirectional_transfer_config(uint32_t spi_periph, uint32_t transfer_direction);
|
||
|
|
|
||
|
|
/* SPI CRC functions */
|
||
|
|
/* set SPI CRC polynomial */
|
||
|
|
void spi_crc_polynomial_set(uint32_t spi_periph, uint16_t crc_poly);
|
||
|
|
/* get SPI CRC polynomial */
|
||
|
|
uint16_t spi_crc_polynomial_get(uint32_t spi_periph);
|
||
|
|
/* turn on SPI CRC function */
|
||
|
|
void spi_crc_on(uint32_t spi_periph);
|
||
|
|
/* turn off SPI CRC function */
|
||
|
|
void spi_crc_off(uint32_t spi_periph);
|
||
|
|
/* SPI next data is CRC value */
|
||
|
|
void spi_crc_next(uint32_t spi_periph);
|
||
|
|
/* get SPI CRC send value or receive value */
|
||
|
|
uint16_t spi_crc_get(uint32_t spi_periph, uint8_t crc);
|
||
|
|
|
||
|
|
/* flag and interrupt functions */
|
||
|
|
/* enable SPI and I2S interrupt */
|
||
|
|
void spi_i2s_interrupt_enable(uint32_t spi_periph, uint8_t interrupt);
|
||
|
|
/* disable SPI and I2S interrupt */
|
||
|
|
void spi_i2s_interrupt_disable(uint32_t spi_periph, uint8_t interrupt);
|
||
|
|
/* get SPI and I2S interrupt status */
|
||
|
|
FlagStatus spi_i2s_interrupt_flag_get(uint32_t spi_periph, uint8_t interrupt);
|
||
|
|
/* get SPI and I2S flag status */
|
||
|
|
FlagStatus spi_i2s_flag_get(uint32_t spi_periph, uint32_t flag);
|
||
|
|
/* clear SPI CRC error flag status */
|
||
|
|
void spi_crc_error_clear(uint32_t spi_periph);
|
||
|
|
|
||
|
|
#endif /* GD32F10X_SPI_H */
|