184 lines
6.5 KiB
C
184 lines
6.5 KiB
C
|
/*
|
||
|
|
* Copyright (c) 2010-2012, Freescale Semiconductor, Inc.
|
||
|
|
* All rights reserved.
|
||
|
|
*
|
||
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
||
|
|
* are permitted provided that the following conditions are met:
|
||
|
|
*
|
||
|
|
* o Redistributions of source code must retain the above copyright notice, this list
|
||
|
|
* of conditions and the following disclaimer.
|
||
|
|
*
|
||
|
|
* o Redistributions in binary form must reproduce the above copyright notice, this
|
||
|
|
* list of conditions and the following disclaimer in the documentation and/or
|
||
|
|
* other materials provided with the distribution.
|
||
|
|
*
|
||
|
|
* o Neither the name of Freescale Semiconductor, Inc. nor the names of its
|
||
|
|
* contributors may be used to endorse or promote products derived from this
|
||
|
|
* software without specific prior written permission.
|
||
|
|
*
|
||
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
|
||
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||
|
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
|
||
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||
|
|
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
||
|
|
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||
|
|
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||
|
|
*/
|
||
|
|
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @file imx_uart.h
|
||
|
|
* @brief various defines used by imx_uart.c
|
||
|
|
*/
|
||
|
|
|
||
|
|
#ifndef __IMX_UART_H__
|
||
|
|
#define __IMX_UART_H__
|
||
|
|
|
||
|
|
#include "sdk.h"
|
||
|
|
|
||
|
|
//! @addtogroup diag_uart
|
||
|
|
//! @{
|
||
|
|
|
||
|
|
//////////////////////////////////////////////////////////////////////////
|
||
|
|
//Constants
|
||
|
|
/////////////////////////////////////////////////////////////////////////
|
||
|
|
|
||
|
|
/* UART specific defines */
|
||
|
|
//! @brief Modes of the PARITY for UART transfer.
|
||
|
|
enum _uart_parity
|
||
|
|
{
|
||
|
|
PARITY_NONE = 0, //!< PARITY mode is PARITY_NONE.
|
||
|
|
PARITY_EVEN = 2, //!< PARITY mode is PARITY_EVEN.
|
||
|
|
PARITY_ODD = 3 //!< PARITY mode is PARITY_ODD.
|
||
|
|
};
|
||
|
|
|
||
|
|
//! @brief Number of stopbits after a character.
|
||
|
|
enum _uart_stopbits
|
||
|
|
{
|
||
|
|
STOPBITS_ONE = 0, //!< One stopbits after a character.
|
||
|
|
STOPBITS_TWO = 1 //!< Two stopbits after a character.
|
||
|
|
};
|
||
|
|
|
||
|
|
//! @brief Flow control mode for UART transfer.
|
||
|
|
enum _uart_flowctrl
|
||
|
|
{
|
||
|
|
FLOWCTRL_OFF = 0, //!< Flow control off for UART transfer.
|
||
|
|
FLOWCTRL_ON = 1 //!< Flow control on for UART transfer.
|
||
|
|
};
|
||
|
|
|
||
|
|
//! @brief Specify the FIFO for UART transfer.
|
||
|
|
enum _uart_fifo
|
||
|
|
{
|
||
|
|
TX_FIFO = 0, //!< Config the TX fifo for UART transfer.
|
||
|
|
RX_FIFO = 1 //!< Config the RX fifo for UART transfer.
|
||
|
|
};
|
||
|
|
|
||
|
|
//! @brief Specify the number of bits in a data
|
||
|
|
enum _uart_bits
|
||
|
|
{
|
||
|
|
SEVENBITS = 0, //!< Config seven bits in a data.
|
||
|
|
EIGHTBITS = 1 //!< Config eight bits in a data.
|
||
|
|
};
|
||
|
|
|
||
|
|
//! @brief Specify the service mode
|
||
|
|
#define DMA_MODE 2 //!< Config the service mode for dma request.
|
||
|
|
#define IRQ_MODE 1 //!< Config the service mode for interrupt.
|
||
|
|
|
||
|
|
#define UART_MODULE_CLK(x) ((x) == HW_UART1 ? UART1_MODULE_CLK : (x) == HW_UART2 ? UART2_MODULE_CLK : (x) == HW_UART3 ? UART3_MODULE_CLK : (x) == HW_UART4 ? UART4_MODULE_CLK : -1)
|
||
|
|
|
||
|
|
#define UART_IRQS(x) ((x) == HW_UART1 ? IMX_INT_UART1 : (x) == HW_UART2 ? IMX_INT_UART2 : (x) == HW_UART3 ? IMX_INT_UART3 : (x) == HW_UART4 ? IMX_INT_UART4 : (x) == HW_UART5 ? IMX_INT_UART5 : 0xFFFFFFFF)
|
||
|
|
|
||
|
|
//////////////////////////////////////////////////////////////////////////
|
||
|
|
//API
|
||
|
|
/////////////////////////////////////////////////////////////////////////
|
||
|
|
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @brief Initialize the UART port
|
||
|
|
*
|
||
|
|
* @param instance the UART instance number.
|
||
|
|
* @param baudrate serial baud rate such 9600, 57600, 115200, etc.
|
||
|
|
* @param parity enable parity checking: PARITY_NONE, PARITY_EVEN,
|
||
|
|
* PARITY_ODD.
|
||
|
|
* @param stopbits number of stop bits: STOPBITS_ONE, STOPBITS_TWO.
|
||
|
|
* @param datasize number of bits in a data: SEVENBITS, EIGHTBITS,
|
||
|
|
* NINEBITS (like RS-485 but not supported).
|
||
|
|
* @param flowcontrol enable (RTS/CTS) hardware flow control:
|
||
|
|
* FLOWCTRL_ON, FLOWCTRL_OFF.
|
||
|
|
*/
|
||
|
|
void uart_init(uint32_t instance, uint32_t baudrate, uint8_t parity,uint8_t stopbits, uint8_t datasize, uint8_t flowcontrol);
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @brief Output a character to UART port
|
||
|
|
*
|
||
|
|
* @param instance the UART instance number.
|
||
|
|
* @param ch pointer to the character for output
|
||
|
|
* @return the character that has been sent
|
||
|
|
*/
|
||
|
|
uint8_t uart_putchar(uint32_t instance, uint8_t * ch);
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @brief Receive a character on the UART port
|
||
|
|
*
|
||
|
|
* @param instance the UART instance number.
|
||
|
|
* @return a character received from the UART port; if the RX FIFO
|
||
|
|
* is empty or errors are detected, it returns NONE_CHAR
|
||
|
|
*/
|
||
|
|
uint8_t uart_getchar(uint32_t instance);
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @brief Configure the RX or TX FIFO level and trigger mode
|
||
|
|
*
|
||
|
|
* @param instance the UART instance number.
|
||
|
|
* @param fifo FIFO to configure: RX_FIFO or TX_FIFO.
|
||
|
|
* @param trigger_level set the trigger level of the FIFO to generate
|
||
|
|
* an IRQ or a DMA request: number of characters.
|
||
|
|
* @param service_mode FIFO served with DMA or IRQ or polling (default).
|
||
|
|
*/
|
||
|
|
void uart_set_FIFO_mode(uint32_t instance, uint8_t fifo, uint8_t trigger_level,
|
||
|
|
uint8_t service_mode);
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @brief Enables UART loopback test mode
|
||
|
|
*
|
||
|
|
* @param instance the UART instance number.
|
||
|
|
* @param state enable/disable the loopback mode
|
||
|
|
*/
|
||
|
|
void uart_set_loopback_mode(uint32_t instance, uint8_t state);
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @brief Setup UART interrupt. It enables or disables the related HW module
|
||
|
|
* interrupt, and attached the related sub-routine into the vector table.
|
||
|
|
*
|
||
|
|
* @param instance the UART instance number.
|
||
|
|
* @param irq_subroutine the UART interrupt interrupt routine.
|
||
|
|
* @param state ENABLE or DISABLE the interrupt.
|
||
|
|
*/
|
||
|
|
void uart_setup_interrupt(uint32_t instance, void (*irq_subroutine)(void), uint8_t state);
|
||
|
|
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @brief Obtain UART reference frequency
|
||
|
|
*
|
||
|
|
* @param instance the UART instance number.
|
||
|
|
* @return reference frequency in Hz
|
||
|
|
*/
|
||
|
|
uint32_t uart_get_reffreq(uint32_t instance);
|
||
|
|
|
||
|
|
//! @name Board support functions
|
||
|
|
//!
|
||
|
|
//! These functions are called by the driver in order to factor out board
|
||
|
|
//! specific functionality. They must be defined by the board support
|
||
|
|
//! library or the application.
|
||
|
|
//@{
|
||
|
|
//! @brief Configure IOMUX for the UART driver.
|
||
|
|
void uart_iomux_config(int instance);
|
||
|
|
//@}
|
||
|
|
|
||
|
|
//! @}
|
||
|
|
|
||
|
|
#endif //__IMX_UART_H__
|