rt-thread/bsp/at32/libraries/rt_drivers/drv_usart.c

1004 lines
28 KiB
C
Raw Normal View History

/*
* Copyright (c) 2006-2021, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2022-05-16 shelton first version
* 2022-11-10 shelton support uart dma
2023-01-30 09:44:30 +08:00
* 2023-01-31 shelton add support f421/f425
* 2023-04-08 shelton add support f423
* 2023-10-18 shelton add support f402/f405
* 2024-04-12 shelton add support a403a and a423
*/
#include "drv_common.h"
#include "drv_usart.h"
#include "drv_config.h"
#ifdef RT_USING_SERIAL
#if !defined(BSP_USING_UART1) && !defined(BSP_USING_UART2) && \
!defined(BSP_USING_UART3) && !defined(BSP_USING_UART4) && \
!defined(BSP_USING_UART5) && !defined(BSP_USING_UART6) && \
!defined(BSP_USING_UART7) && !defined(BSP_USING_UART8)
#error "Please define at least one BSP_USING_UARTx"
#endif
enum {
#ifdef BSP_USING_UART1
UART1_INDEX,
#endif
#ifdef BSP_USING_UART2
UART2_INDEX,
#endif
#ifdef BSP_USING_UART3
UART3_INDEX,
#endif
#ifdef BSP_USING_UART4
UART4_INDEX,
#endif
#ifdef BSP_USING_UART5
UART5_INDEX,
#endif
#ifdef BSP_USING_UART6
UART6_INDEX,
#endif
#ifdef BSP_USING_UART7
UART7_INDEX,
#endif
#ifdef BSP_USING_UART8
UART8_INDEX,
#endif
};
static struct at32_uart uart_config[] = {
#ifdef BSP_USING_UART1
UART1_CONFIG,
#endif
#ifdef BSP_USING_UART2
UART2_CONFIG,
#endif
#ifdef BSP_USING_UART3
UART3_CONFIG,
#endif
#ifdef BSP_USING_UART4
UART4_CONFIG,
#endif
#ifdef BSP_USING_UART5
UART5_CONFIG,
#endif
#ifdef BSP_USING_UART6
UART6_CONFIG,
#endif
#ifdef BSP_USING_UART7
UART7_CONFIG,
#endif
#ifdef BSP_USING_UART8
UART8_CONFIG,
#endif
};
#ifdef RT_SERIAL_USING_DMA
static void at32_dma_config(struct rt_serial_device *serial, rt_ubase_t flag);
#endif
static rt_err_t at32_configure(struct rt_serial_device *serial,
struct serial_configure *cfg) {
usart_data_bit_num_type data_bit;
usart_stop_bit_num_type stop_bit;
usart_parity_selection_type parity_mode;
usart_hardware_flow_control_type flow_control;
RT_ASSERT(serial != RT_NULL);
RT_ASSERT(cfg != RT_NULL);
struct at32_uart *instance = rt_container_of(serial, struct at32_uart, serial);
RT_ASSERT(instance != RT_NULL);
at32_msp_usart_init((void *)instance->uart_x);
usart_receiver_enable(instance->uart_x, TRUE);
usart_transmitter_enable(instance->uart_x, TRUE);
switch (cfg->data_bits) {
case DATA_BITS_8:
data_bit = USART_DATA_8BITS;
break;
case DATA_BITS_9:
data_bit = USART_DATA_9BITS;
break;
default:
data_bit = USART_DATA_8BITS;
break;
}
switch (cfg->stop_bits) {
case STOP_BITS_1:
stop_bit = USART_STOP_1_BIT;
break;
case STOP_BITS_2:
stop_bit = USART_STOP_2_BIT;
break;
default:
stop_bit = USART_STOP_1_BIT;
break;
}
switch (cfg->parity) {
case PARITY_NONE:
parity_mode = USART_PARITY_NONE;
break;
case PARITY_ODD:
parity_mode = USART_PARITY_ODD;
break;
case PARITY_EVEN:
parity_mode = USART_PARITY_EVEN;
break;
default:
parity_mode = USART_PARITY_NONE;
break;
}
switch (cfg->flowcontrol) {
case RT_SERIAL_FLOWCONTROL_NONE:
flow_control = USART_HARDWARE_FLOW_NONE;
break;
case RT_SERIAL_FLOWCONTROL_CTSRTS:
flow_control = USART_HARDWARE_FLOW_RTS_CTS;
break;
default:
flow_control = USART_HARDWARE_FLOW_NONE;
break;
}
#ifdef RT_SERIAL_USING_DMA
if (!(serial->parent.open_flag & RT_DEVICE_OFLAG_OPEN)) {
instance->last_index = 0;
}
#endif
usart_hardware_flow_control_set(instance->uart_x, flow_control);
usart_parity_selection_config(instance->uart_x, parity_mode);
usart_init(instance->uart_x, cfg->baud_rate, data_bit, stop_bit);
usart_enable(instance->uart_x, TRUE);
return RT_EOK;
}
static rt_err_t at32_control(struct rt_serial_device *serial, int cmd, void *arg) {
struct at32_uart *instance;
#ifdef RT_SERIAL_USING_DMA
rt_ubase_t ctrl_arg = (rt_ubase_t)arg;
#endif
RT_ASSERT(serial != RT_NULL);
instance = rt_container_of(serial, struct at32_uart, serial);
RT_ASSERT(instance != RT_NULL);
switch (cmd) {
case RT_DEVICE_CTRL_CLR_INT:
nvic_irq_disable(instance->irqn);
usart_interrupt_enable(instance->uart_x, USART_RDBF_INT, FALSE);
#ifdef RT_SERIAL_USING_DMA
/* disable DMA */
if (ctrl_arg == RT_DEVICE_FLAG_DMA_RX)
{
nvic_irq_disable(instance->dma_rx->dma_irqn);
dma_reset(instance->dma_rx->dma_channel);
}
else if(ctrl_arg == RT_DEVICE_FLAG_DMA_TX)
{
nvic_irq_disable(instance->dma_tx->dma_irqn);
dma_reset(instance->dma_tx->dma_channel);
}
#endif
break;
case RT_DEVICE_CTRL_SET_INT:
nvic_irq_enable(instance->irqn, 1, 0);
usart_interrupt_enable(instance->uart_x, USART_RDBF_INT, TRUE);
break;
#ifdef RT_SERIAL_USING_DMA
case RT_DEVICE_CTRL_CONFIG:
at32_dma_config(serial, ctrl_arg);
break;
#endif
}
return RT_EOK;
}
static int at32_putc(struct rt_serial_device *serial, char ch) {
struct at32_uart *instance;
RT_ASSERT(serial != RT_NULL);
instance = rt_container_of(serial, struct at32_uart, serial);
RT_ASSERT(instance != RT_NULL);
usart_data_transmit(instance->uart_x, (uint8_t)ch);
while (usart_flag_get(instance->uart_x, USART_TDC_FLAG) == RESET);
return 1;
}
static int at32_getc(struct rt_serial_device *serial) {
int ch;
struct at32_uart *instance;
RT_ASSERT(serial != RT_NULL);
instance = rt_container_of(serial, struct at32_uart, serial);
RT_ASSERT(instance != RT_NULL);
ch = -1;
if (usart_flag_get(instance->uart_x, USART_RDBF_FLAG) != RESET) {
ch = usart_data_receive(instance->uart_x) & 0xff;
}
return ch;
}
#ifdef RT_SERIAL_USING_DMA
static void _uart_dma_receive(struct at32_uart *instance, rt_uint8_t *buffer, rt_uint32_t size)
{
dma_channel_type* dma_channel = instance->dma_rx->dma_channel;
dma_channel->dtcnt = size;
dma_channel->paddr = (rt_uint32_t)&(instance->uart_x->dt);
dma_channel->maddr = (rt_uint32_t)buffer;
/* enable usart interrupt */
usart_interrupt_enable(instance->uart_x, USART_PERR_INT, TRUE);
usart_interrupt_enable(instance->uart_x, USART_IDLE_INT, TRUE);
/* enable transmit complete interrupt */
dma_interrupt_enable(dma_channel, DMA_FDT_INT, TRUE);
/* enable dma receive */
usart_dma_receiver_enable(instance->uart_x, TRUE);
/* enable dma channel */
dma_channel_enable(dma_channel, TRUE);
}
static void _uart_dma_transmit(struct at32_uart *instance, rt_uint8_t *buffer, rt_uint32_t size)
{
/* wait before transfer complete */
while(instance->dma_tx->dma_done == RT_FALSE);
dma_channel_type *dma_channel = instance->dma_tx->dma_channel;
dma_channel->dtcnt = size;
dma_channel->paddr = (rt_uint32_t)&(instance->uart_x->dt);
dma_channel->maddr = (rt_uint32_t)buffer;
/* enable transmit complete interrupt */
dma_interrupt_enable(dma_channel, DMA_FDT_INT, TRUE);
/* enable dma transmit */
usart_dma_transmitter_enable(instance->uart_x, TRUE);
/* mark dma flag */
instance->dma_tx->dma_done = RT_FALSE;
/* enable dma channel */
dma_channel_enable(dma_channel, TRUE);
}
static void at32_dma_config(struct rt_serial_device *serial, rt_ubase_t flag)
{
dma_init_type dma_init_struct;
dma_channel_type *dma_channel = NULL;
struct rt_serial_rx_fifo *rx_fifo;
struct at32_uart *instance;
struct dma_config *dma_config;
RT_ASSERT(serial != RT_NULL);
instance = rt_container_of(serial, struct at32_uart, serial);
RT_ASSERT(instance != RT_NULL);
RT_ASSERT(flag == RT_DEVICE_FLAG_DMA_TX || flag == RT_DEVICE_FLAG_DMA_RX);
if (RT_DEVICE_FLAG_DMA_RX == flag)
{
dma_channel = instance->dma_rx->dma_channel;
dma_config = instance->dma_rx;
}
else /* RT_DEVICE_FLAG_DMA_TX == flag */
{
dma_channel = instance->dma_tx->dma_channel;
dma_config = instance->dma_tx;
}
crm_periph_clock_enable(dma_config->dma_clock, TRUE);
dma_default_para_init(&dma_init_struct);
dma_init_struct.peripheral_inc_enable = FALSE;
dma_init_struct.memory_inc_enable = TRUE;
dma_init_struct.peripheral_data_width = DMA_PERIPHERAL_DATA_WIDTH_BYTE;
dma_init_struct.memory_data_width = DMA_MEMORY_DATA_WIDTH_BYTE;
dma_init_struct.priority = DMA_PRIORITY_MEDIUM;
if (RT_DEVICE_FLAG_DMA_RX == flag)
{
dma_init_struct.direction = DMA_DIR_PERIPHERAL_TO_MEMORY;
dma_init_struct.loop_mode_enable = TRUE;
}
else if (RT_DEVICE_FLAG_DMA_TX == flag)
{
dma_init_struct.direction = DMA_DIR_MEMORY_TO_PERIPHERAL;
dma_init_struct.loop_mode_enable = FALSE;
}
dma_reset(dma_channel);
dma_init(dma_channel, &dma_init_struct);
2023-01-30 09:44:30 +08:00
#if defined (SOC_SERIES_AT32F425)
dma_flexible_config(dma_config->dma_x, dma_config->flex_channel, \
(dma_flexible_request_type)dma_config->request_id);
#endif
#if defined (SOC_SERIES_AT32F435) || defined (SOC_SERIES_AT32F437) || \
defined (SOC_SERIES_AT32F423) || defined (SOC_SERIES_AT32F402) || \
defined (SOC_SERIES_AT32F405) || defined (SOC_SERIES_AT32A423)
dmamux_enable(dma_config->dma_x, TRUE);
dmamux_init(dma_config->dmamux_channel, (dmamux_requst_id_sel_type)dma_config->request_id);
#endif
/* enable interrupt */
if (flag == RT_DEVICE_FLAG_DMA_RX)
{
rx_fifo = (struct rt_serial_rx_fifo *)serial->serial_rx;
/* start dma transfer */
_uart_dma_receive(instance, rx_fifo->buffer, serial->config.bufsz);
}
/* dma irq should set in dma tx mode */
nvic_irq_enable(dma_config->dma_irqn, 0, 0);
nvic_irq_enable(instance->irqn, 1, 0);
}
static rt_ssize_t at32_dma_transmit(struct rt_serial_device *serial, rt_uint8_t *buf, rt_size_t size, int direction)
{
struct at32_uart *instance;
RT_ASSERT(serial != RT_NULL);
instance = rt_container_of(serial, struct at32_uart, serial);
RT_ASSERT(instance != RT_NULL);
RT_ASSERT(buf != RT_NULL);
if (size == 0)
{
return 0;
}
if (RT_SERIAL_DMA_TX == direction)
{
_uart_dma_transmit(instance, buf, size);
}
return size;
}
#endif
static const struct rt_uart_ops at32_uart_ops = {
at32_configure,
at32_control,
at32_putc,
at32_getc,
#ifdef RT_SERIAL_USING_DMA
at32_dma_transmit,
#endif
};
#ifdef RT_SERIAL_USING_DMA
void dma_rx_isr(struct rt_serial_device *serial)
{
volatile rt_uint32_t reg_sts = 0, index = 0;
rt_size_t recv_total_index, recv_len;
rt_base_t level;
struct at32_uart *instance;
RT_ASSERT(serial != RT_NULL);
instance = rt_container_of(serial, struct at32_uart, serial);
RT_ASSERT(instance != RT_NULL);
reg_sts = instance->dma_rx->dma_x->sts;
index = instance->dma_rx->channel_index;
if (((reg_sts & (DMA_FDT_FLAG << (4 * (index - 1)))) != RESET) ||
((reg_sts & (DMA_HDT_FLAG << (4 * (index - 1)))) != RESET))
{
/* clear dma flag */
instance->dma_rx->dma_x->clr |= (rt_uint32_t)(DMA_FDT_FLAG << (4 * (index - 1))) | (DMA_HDT_FLAG << (4 * (index - 1)));
level = rt_hw_interrupt_disable();
recv_total_index = serial->config.bufsz - dma_data_number_get(instance->dma_rx->dma_channel);
if (recv_total_index == 0)
{
recv_len = serial->config.bufsz - instance->last_index;
}
else
{
recv_len = recv_total_index - instance->last_index;
}
instance->last_index = recv_total_index;
rt_hw_interrupt_enable(level);
if (recv_len)
{
rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_DMADONE | (recv_len << 8));
}
}
}
void dma_tx_isr(struct rt_serial_device *serial)
{
volatile rt_uint32_t reg_sts = 0, index = 0;
rt_size_t trans_total_index;
rt_base_t level;
struct at32_uart *instance;
RT_ASSERT(serial != RT_NULL);
instance = rt_container_of(serial, struct at32_uart, serial);
RT_ASSERT(instance != RT_NULL);
reg_sts = instance->dma_tx->dma_x->sts;
index = instance->dma_tx->channel_index;
if ((reg_sts & (DMA_FDT_FLAG << (4 * (index - 1)))) != RESET)
{
/* mark dma flag */
instance->dma_tx->dma_done = RT_TRUE;
/* clear dma flag */
instance->dma_tx->dma_x->clr |= (rt_uint32_t)(DMA_FDT_FLAG << (4 * (index - 1)));
/* disable dma tx channel */
dma_channel_enable(instance->dma_tx->dma_channel, FALSE);
level = rt_hw_interrupt_disable();
trans_total_index = dma_data_number_get(instance->dma_tx->dma_channel);
rt_hw_interrupt_enable(level);
if (trans_total_index == 0)
{
rt_hw_serial_isr(serial, RT_SERIAL_EVENT_TX_DMADONE);
}
}
}
#endif
static void usart_isr(struct rt_serial_device *serial) {
struct at32_uart *instance;
#ifdef RT_SERIAL_USING_DMA
rt_size_t recv_total_index, recv_len;
rt_base_t level;
#endif
RT_ASSERT(serial != RT_NULL);
instance = rt_container_of(serial, struct at32_uart, serial);
RT_ASSERT(instance != RT_NULL);
if (usart_flag_get(instance->uart_x, USART_RDBF_FLAG) != RESET) {
rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
}
#ifdef RT_SERIAL_USING_DMA
else if (usart_flag_get(instance->uart_x, USART_IDLEF_FLAG) != RESET)
{
/* clear idle flag */
usart_data_receive(instance->uart_x);
level = rt_hw_interrupt_disable();
recv_total_index = serial->config.bufsz - dma_data_number_get(instance->dma_rx->dma_channel);
recv_len = recv_total_index - instance->last_index;
instance->last_index = recv_total_index;
rt_hw_interrupt_enable(level);
if (recv_len)
{
rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_DMADONE | (recv_len << 8));
}
}
#endif
else
{
if (usart_flag_get(instance->uart_x, USART_CTSCF_FLAG) != RESET) {
usart_flag_clear(instance->uart_x, USART_CTSCF_FLAG);
}
if (usart_flag_get(instance->uart_x, USART_BFF_FLAG) != RESET) {
usart_flag_clear(instance->uart_x, USART_BFF_FLAG);
}
}
}
#ifdef BSP_USING_UART1
void UART1_IRQHandler(void) {
rt_interrupt_enter();
usart_isr(&uart_config[UART1_INDEX].serial);
rt_interrupt_leave();
}
#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART1_RX_USING_DMA)
void UART1_RX_DMA_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
dma_rx_isr(&uart_config[UART1_INDEX].serial);
/* leave interrupt */
rt_interrupt_leave();
}
#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_UART1_RX_USING_DMA) */
#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART1_TX_USING_DMA)
void UART1_TX_DMA_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
dma_tx_isr(&uart_config[UART1_INDEX].serial);
/* leave interrupt */
rt_interrupt_leave();
}
#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_UART1_TX_USING_DMA) */
#endif
#ifdef BSP_USING_UART2
void UART2_IRQHandler(void) {
rt_interrupt_enter();
usart_isr(&uart_config[UART2_INDEX].serial);
rt_interrupt_leave();
}
#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART2_RX_USING_DMA)
void UART2_RX_DMA_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
dma_rx_isr(&uart_config[UART2_INDEX].serial);
/* leave interrupt */
rt_interrupt_leave();
}
#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_UART2_RX_USING_DMA) */
#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART2_TX_USING_DMA)
void UART2_TX_DMA_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
dma_tx_isr(&uart_config[UART2_INDEX].serial);
/* leave interrupt */
rt_interrupt_leave();
}
#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_UART2_TX_USING_DMA) */
#endif
#ifdef BSP_USING_UART3
void UART3_IRQHandler(void) {
rt_interrupt_enter();
usart_isr(&uart_config[UART3_INDEX].serial);
rt_interrupt_leave();
}
#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART3_RX_USING_DMA)
void UART3_RX_DMA_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
dma_rx_isr(&uart_config[UART3_INDEX].serial);
/* leave interrupt */
rt_interrupt_leave();
}
#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_UART3_RX_USING_DMA) */
#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART3_TX_USING_DMA)
void UART3_TX_DMA_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
dma_tx_isr(&uart_config[UART3_INDEX].serial);
/* leave interrupt */
rt_interrupt_leave();
}
#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_UART3_TX_USING_DMA) */
#endif
#ifdef BSP_USING_UART4
void UART4_IRQHandler(void) {
rt_interrupt_enter();
usart_isr(&uart_config[UART4_INDEX].serial);
rt_interrupt_leave();
}
#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART4_RX_USING_DMA)
void UART4_RX_DMA_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
dma_rx_isr(&uart_config[UART4_INDEX].serial);
/* leave interrupt */
rt_interrupt_leave();
}
#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_UART4_RX_USING_DMA) */
#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART4_TX_USING_DMA)
void UART4_TX_DMA_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
dma_tx_isr(&uart_config[UART4_INDEX].serial);
/* leave interrupt */
rt_interrupt_leave();
}
#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_UART14_TX_USING_DMA) */
#endif
#ifdef BSP_USING_UART5
void UART5_IRQHandler(void) {
rt_interrupt_enter();
usart_isr(&uart_config[UART5_INDEX].serial);
rt_interrupt_leave();
}
#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART5_RX_USING_DMA)
void UART5_RX_DMA_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
dma_rx_isr(&uart_config[UART5_INDEX].serial);
/* leave interrupt */
rt_interrupt_leave();
}
#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_UART5_RX_USING_DMA) */
#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART5_TX_USING_DMA)
void UART5_TX_DMA_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
dma_tx_isr(&uart_config[UART5_INDEX].serial);
/* leave interrupt */
rt_interrupt_leave();
}
#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_UART5_TX_USING_DMA) */
#endif
#ifdef BSP_USING_UART6
void UART6_IRQHandler(void) {
rt_interrupt_enter();
usart_isr(&uart_config[UART6_INDEX].serial);
rt_interrupt_leave();
}
#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART6_RX_USING_DMA)
void UART6_RX_DMA_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
dma_rx_isr(&uart_config[UART6_INDEX].serial);
/* leave interrupt */
rt_interrupt_leave();
}
#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_UART6_RX_USING_DMA) */
#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART6_TX_USING_DMA)
void UART6_TX_DMA_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
dma_tx_isr(&uart_config[UART6_INDEX].serial);
/* leave interrupt */
rt_interrupt_leave();
}
#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_UART6_TX_USING_DMA) */
#endif
#ifdef BSP_USING_UART7
void UART7_IRQHandler(void) {
rt_interrupt_enter();
usart_isr(&uart_config[UART7_INDEX].serial);
rt_interrupt_leave();
}
#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART7_RX_USING_DMA)
void UART7_RX_DMA_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
dma_rx_isr(&uart_config[UART7_INDEX].serial);
/* leave interrupt */
rt_interrupt_leave();
}
#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_UART7_RX_USING_DMA) */
#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART7_TX_USING_DMA)
void UART7_TX_DMA_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
dma_tx_isr(&uart_config[UART7_INDEX].serial);
/* leave interrupt */
rt_interrupt_leave();
}
#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_UART7_TX_USING_DMA) */
#endif
#ifdef BSP_USING_UART8
void UART8_IRQHandler(void) {
rt_interrupt_enter();
usart_isr(&uart_config[UART8_INDEX].serial);
rt_interrupt_leave();
}
#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART8_RX_USING_DMA)
void UART8_RX_DMA_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
dma_rx_isr(&uart_config[UART8_INDEX].serial);
/* leave interrupt */
rt_interrupt_leave();
}
#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_UART8_RX_USING_DMA) */
#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART8_TX_USING_DMA)
void UART8_TX_DMA_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
dma_tx_isr(&uart_config[UART8_INDEX].serial);
/* leave interrupt */
rt_interrupt_leave();
}
#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_UART8_TX_USING_DMA) */
#endif
2023-01-30 09:44:30 +08:00
#if defined (SOC_SERIES_AT32F421)
void UART1_TX_RX_DMA_IRQHandler(void)
{
#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART1_TX_USING_DMA)
UART1_TX_DMA_IRQHandler();
#endif
#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART1_RX_USING_DMA)
UART1_RX_DMA_IRQHandler();
#endif
}
void UART2_TX_RX_DMA_IRQHandler(void)
{
#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART2_TX_USING_DMA)
UART2_TX_DMA_IRQHandler();
#endif
#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART2_RX_USING_DMA)
UART2_RX_DMA_IRQHandler();
#endif
}
#endif
#if defined (SOC_SERIES_AT32F425)
#if defined(BSP_USING_UART3) || defined(BSP_USING_UART4)
void USART4_3_IRQHandler(void)
{
#if defined(BSP_USING_UART3)
UART3_IRQHandler();
2023-01-30 09:44:30 +08:00
#endif
#if defined(BSP_USING_UART4)
UART4_IRQHandler();
#endif
}
#endif
void UART1_TX_RX_DMA_IRQHandler(void)
{
#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART1_TX_USING_DMA)
UART1_TX_DMA_IRQHandler();
#endif
#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART1_RX_USING_DMA)
UART1_RX_DMA_IRQHandler();
#endif
}
void UART3_2_TX_RX_DMA_IRQHandler(void)
{
#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART2_TX_USING_DMA)
UART2_TX_DMA_IRQHandler();
#endif
#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART2_RX_USING_DMA)
UART2_RX_DMA_IRQHandler();
#endif
#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART3_TX_USING_DMA)
UART3_TX_DMA_IRQHandler();
#endif
#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART3_RX_USING_DMA)
UART3_RX_DMA_IRQHandler();
#endif
}
#endif
#if defined (RT_SERIAL_USING_DMA)
static void _dma_base_channel_check(struct at32_uart *instance)
{
dma_channel_type *rx_channel = instance->dma_rx->dma_channel;
dma_channel_type *tx_channel = instance->dma_tx->dma_channel;
instance->dma_rx->dma_done = RT_TRUE;
instance->dma_rx->dma_x = (dma_type *)((rt_uint32_t)rx_channel & ~0xFF);
instance->dma_rx->channel_index = ((((rt_uint32_t)rx_channel & 0xFF) - 8) / 0x14) + 1;
instance->dma_tx->dma_done = RT_TRUE;
instance->dma_tx->dma_x = (dma_type *)((rt_uint32_t)tx_channel & ~0xFF);
instance->dma_tx->channel_index = ((((rt_uint32_t)tx_channel & 0xFF) - 8) / 0x14) + 1;
}
#endif
static void at32_uart_get_dma_config(void)
{
#ifdef BSP_USING_UART1
uart_config[UART1_INDEX].uart_dma_flag = 0;
#ifdef BSP_UART1_RX_USING_DMA
uart_config[UART1_INDEX].uart_dma_flag |= RT_DEVICE_FLAG_DMA_RX;
static struct dma_config uart1_dma_rx = UART1_RX_DMA_CONFIG;
uart_config[UART1_INDEX].dma_rx = &uart1_dma_rx;
#endif
#ifdef BSP_UART1_TX_USING_DMA
uart_config[UART1_INDEX].uart_dma_flag |= RT_DEVICE_FLAG_DMA_TX;
static struct dma_config uart1_dma_tx = UART1_TX_DMA_CONFIG;
uart_config[UART1_INDEX].dma_tx = &uart1_dma_tx;
#endif
#endif
#ifdef BSP_USING_UART2
uart_config[UART2_INDEX].uart_dma_flag = 0;
#ifdef BSP_UART2_RX_USING_DMA
uart_config[UART2_INDEX].uart_dma_flag |= RT_DEVICE_FLAG_DMA_RX;
static struct dma_config uart2_dma_rx = UART2_RX_DMA_CONFIG;
uart_config[UART2_INDEX].dma_rx = &uart2_dma_rx;
#endif
#ifdef BSP_UART2_TX_USING_DMA
uart_config[UART2_INDEX].uart_dma_flag |= RT_DEVICE_FLAG_DMA_TX;
static struct dma_config uart2_dma_tx = UART2_TX_DMA_CONFIG;
uart_config[UART2_INDEX].dma_tx = &uart2_dma_tx;
#endif
#endif
#ifdef BSP_USING_UART3
uart_config[UART3_INDEX].uart_dma_flag = 0;
#ifdef BSP_UART3_RX_USING_DMA
uart_config[UART3_INDEX].uart_dma_flag |= RT_DEVICE_FLAG_DMA_RX;
static struct dma_config uart3_dma_rx = UART3_RX_DMA_CONFIG;
uart_config[UART3_INDEX].dma_rx = &uart3_dma_rx;
#endif
#ifdef BSP_UART3_TX_USING_DMA
uart_config[UART3_INDEX].uart_dma_flag |= RT_DEVICE_FLAG_DMA_TX;
static struct dma_config uart3_dma_tx = UART3_TX_DMA_CONFIG;
uart_config[UART3_INDEX].dma_tx = &uart3_dma_tx;
#endif
#endif
#ifdef BSP_USING_UART4
uart_config[UART4_INDEX].uart_dma_flag = 0;
#ifdef BSP_UART4_RX_USING_DMA
uart_config[UART4_INDEX].uart_dma_flag |= RT_DEVICE_FLAG_DMA_RX;
static struct dma_config uart4_dma_rx = UART4_RX_DMA_CONFIG;
uart_config[UART4_INDEX].dma_rx = &uart4_dma_rx;
#endif
#ifdef BSP_UART4_TX_USING_DMA
uart_config[UART4_INDEX].uart_dma_flag |= RT_DEVICE_FLAG_DMA_TX;
static struct dma_config uart4_dma_tx = UART4_TX_DMA_CONFIG;
uart_config[UART4_INDEX].dma_tx = &uart4_dma_tx;
#endif
#endif
#ifdef BSP_USING_UART5
uart_config[UART5_INDEX].uart_dma_flag = 0;
#ifdef BSP_UART5_RX_USING_DMA
uart_config[UART5_INDEX].uart_dma_flag |= RT_DEVICE_FLAG_DMA_RX;
static struct dma_config uart5_dma_rx = UART5_RX_DMA_CONFIG;
uart_config[UART5_INDEX].dma_rx = &uart5_dma_rx;
#endif
#ifdef BSP_UART5_TX_USING_DMA
uart_config[UART5_INDEX].uart_dma_flag |= RT_DEVICE_FLAG_DMA_TX;
static struct dma_config uart5_dma_tx = UART5_TX_DMA_CONFIG;
uart_config[UART5_INDEX].dma_tx = &uart5_dma_tx;
#endif
#endif
#ifdef BSP_USING_UART6
uart_config[UART6_INDEX].uart_dma_flag = 0;
#ifdef BSP_UART6_RX_USING_DMA
uart_config[UART6_INDEX].uart_dma_flag |= RT_DEVICE_FLAG_DMA_RX;
static struct dma_config uart6_dma_rx = UART6_RX_DMA_CONFIG;
uart_config[UART6_INDEX].dma_rx = &uart6_dma_rx;
#endif
#ifdef BSP_UART6_TX_USING_DMA
uart_config[UART6_INDEX].uart_dma_flag |= RT_DEVICE_FLAG_DMA_TX;
static struct dma_config uart6_dma_tx = UART6_TX_DMA_CONFIG;
uart_config[UART6_INDEX].dma_tx = &uart6_dma_tx;
#endif
#endif
#ifdef BSP_USING_UART7
uart_config[UART7_INDEX].uart_dma_flag = 0;
#ifdef BSP_UART7_RX_USING_DMA
uart_config[UART7_INDEX].uart_dma_flag |= RT_DEVICE_FLAG_DMA_RX;
static struct dma_config uart7_dma_rx = UART7_RX_DMA_CONFIG;
uart_config[UART7_INDEX].dma_rx = &uart7_dma_rx;
#endif
#ifdef BSP_UART7_TX_USING_DMA
uart_config[UART7_INDEX].uart_dma_flag |= RT_DEVICE_FLAG_DMA_TX;
static struct dma_config uart7_dma_tx = UART7_TX_DMA_CONFIG;
uart_config[UART7_INDEX].dma_tx = &uart7_dma_tx;
#endif
#endif
#ifdef BSP_USING_UART8
uart_config[UART8_INDEX].uart_dma_flag = 0;
#ifdef BSP_UART8_RX_USING_DMA
uart_config[UART8_INDEX].uart_dma_flag |= RT_DEVICE_FLAG_DMA_RX;
static struct dma_config uart8_dma_rx = UART8_RX_DMA_CONFIG;
uart_config[UART8_INDEX].dma_rx = &uart8_dma_rx;
#endif
#ifdef BSP_UART8_TX_USING_DMA
uart_config[UART8_INDEX].uart_dma_flag |= RT_DEVICE_FLAG_DMA_TX;
static struct dma_config uart8_dma_tx = UART8_TX_DMA_CONFIG;
uart_config[UART8_INDEX].dma_tx = &uart8_dma_tx;
#endif
#endif
}
int rt_hw_usart_init(void) {
rt_size_t obj_num;
int index;
obj_num = sizeof(uart_config) / sizeof(struct at32_uart);
struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT;
rt_err_t result = 0;
at32_uart_get_dma_config();
for (index = 0; index < obj_num; index++) {
uart_config[index].serial.ops = &at32_uart_ops;
uart_config[index].serial.config = config;
#if defined (RT_SERIAL_USING_DMA)
/* search dma base and channel index */
_dma_base_channel_check(&uart_config[index]);
#endif
/* register uart device */
result = rt_hw_serial_register(&uart_config[index].serial,
uart_config[index].name,
RT_DEVICE_FLAG_RDWR |
RT_DEVICE_FLAG_INT_RX |
uart_config[index].uart_dma_flag ,
&uart_config[index]);
RT_ASSERT(result == RT_EOK);
}
return result;
}
#endif /* BSP_USING_SERIAL */