rt-thread/bsp/hc32f4a0/Libraries/HC32F4A0_StdPeriph_Driver/inc/hc32f4a0_adc.h

602 lines
25 KiB
C
Raw Normal View History

2020-12-25 14:33:03 +08:00
/**
*******************************************************************************
* @file hc32f4a0_adc.h
* @brief This file contains all the functions prototypes of the ADC driver
* library.
@verbatim
Change Logs:
Date Author Notes
2020-06-12 Wuze First version
2020-12-15 Wuze ADC_ComTriggerCmd() refine.
@endverbatim
*******************************************************************************
* Copyright (C) 2020, Huada Semiconductor Co., Ltd. All rights reserved.
*
* This software component is licensed by HDSC under BSD 3-Clause license
* (the "License"); You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
*******************************************************************************
*/
#ifndef __HC32F4A0_ADC_H__
#define __HC32F4A0_ADC_H__
/* C binding of definitions if building with C++ compiler */
#ifdef __cplusplus
extern "C"
{
#endif
/*******************************************************************************
* Include files
******************************************************************************/
#include "hc32_common.h"
#include "ddl_config.h"
/**
* @addtogroup HC32F4A0_DDL_Driver
* @{
*/
/**
* @addtogroup DDL_ADC
* @{
*/
#if (DDL_ADC_ENABLE == DDL_ON)
/*******************************************************************************
* Global type definitions ('typedef')
******************************************************************************/
/**
* @defgroup ADC_Global_Types ADC Global Types
* @{
*/
/**
* @brief Structure definition of ADC initialization.
*/
typedef struct
{
uint16_t u16ScanMode; /*!< Configures the scan convert mode of ADC.
This parameter can be a value of @ref ADC_Scan_Convert_Mode */
uint16_t u16Resolution; /*!< Configures the ADC resolution.
This parameter can be a value of @ref ADC_Resolution */
uint16_t u16AutoClrCmd; /*!< Configures whether the ADC data register is
automatically cleared after the data is read.
This parameter can be a value of @ref ADC_Data_Auto_Clear_Cmd */
uint16_t u16DataAlign; /*!< Specifies ADC data alignment to right or to left.
This parameter can be a value of @ref ADC_Data_Alignment */
uint16_t u16SAResumePos; /*!< Specifies the resume channel position of sequence A.
Sequence A can be interrupted by sequence B. After the
the ending of sequence B, sequence A resumes from the
specified channel position.
This parameter can be a value of @ref ADC_Sequence_A_Resume_Channel_Position */
} stc_adc_init_t;
/**
* @brief Structure definition of ADC trigger source configuration.
*/
typedef struct
{
uint16_t u16TrigSrc; /*!< Specifies the trigger source type for the specified sequence.
This parameter can be a value of @ref ADC_Trigger_Source_Type */
en_event_src_t enEvent0; /*!< An @ref en_event_src_t enumeration value. */
en_event_src_t enEvent1; /*!< An @ref en_event_src_t enumeration value. */
} stc_adc_trig_cfg_t;
/**
* @brief Structure definition of AWD(analog watchdog) configuration.
*/
typedef struct
{
uint8_t u8ChNum; /*!< The number of the ADC channel which to be configured as an AWD channel.
This parameter can be a value of range [ADC_CH_NUM_0, ADC_CH_NUM_15] of @ref ADC_Channel_Number */
uint16_t u16CmpMode; /*!< The comparison mode of AWD.
This parameter can be a value of @ref ADC_AWD_Comparison_Mode */
uint16_t u16LowerLimit; /*!< Threshold lower limit value(to register ADC_AWDxDR0). */
uint16_t u16UpperLimit; /*!< Threshold upper limit value(to register ADC_AWDxDR1). */
} stc_adc_awd_cfg_t;
/**
* @}
*/
/*******************************************************************************
* Global pre-processor symbols/macros ('#define')
******************************************************************************/
/**
* @defgroup ADC_Global_Macros ADC Global Macros
* @{
*/
/**
* @defgroup ADC_Sequence ADC Sequence
* @{
*/
#define ADC_SEQ_A (0U)
#define ADC_SEQ_B (1U)
/**
* @}
*/
/**
* @defgroup ADC_AWD_Unit ADC Analog Watchdog Unit
* @{
*/
#define ADC_AWD_0 (0U)
#define ADC_AWD_1 (1U)
/**
* @}
*/
/**
* @defgroup ADC_Scan_Convert_Mode ADC Scan Convert Mode
* @{
*/
#define ADC_MODE_SA_SSHOT (0x0U) /*!< Sequence A single shot. */
#define ADC_MODE_SA_CONT (ADC_CR0_MS_0) /*!< Sequence A continuous. */
#define ADC_MODE_SA_SB_SSHOT (ADC_CR0_MS_1) /*!< Sequence A and B both single shot. */
#define ADC_MODE_SA_CONT_SB_SSHOT (ADC_CR0_MS_1 | \
ADC_CR0_MS_0) /*!< Sequence A continuous and sequence B single shot. */
/**
* @}
*/
/**
* @defgroup ADC_Resolution ADC Resolution
* @{
*/
#define ADC_RESOLUTION_12BIT (0x0U) /*!< Resolution is 12 bit. */
#define ADC_RESOLUTION_10BIT (ADC_CR0_ACCSEL_0) /*!< Resolution is 10 bit. */
#define ADC_RESOLUTION_8BIT (ADC_CR0_ACCSEL_1) /*!< Resolution is 8 bit. */
/**
* @}
*/
/**
* @defgroup ADC_Data_Auto_Clear_Cmd ADC Data Auto Clear Cmd
* @{
*/
#define ADC_AUTO_CLR_DISABLE (0x0U)
#define ADC_AUTO_CLR_ENABLE (ADC_CR0_CLREN) /*!< ADC data register is automatically cleared after the data is read. */
/**
* @}
*/
/**
* @defgroup ADC_Data_Alignment ADC Data Alignment
* @{
*/
#define ADC_DATA_ALIGN_RIGHT (0x0U)
#define ADC_DATA_ALIGN_LEFT (ADC_CR0_DFMT)
/**
* @}
*/
/**
* @defgroup ADC_Average_Count ADC Average Count
* @{
*/
#define ADC_AVG_CNT_2 (0x0U)
#define ADC_AVG_CNT_4 (ADC_CR0_AVCNT_0)
#define ADC_AVG_CNT_8 (ADC_CR0_AVCNT_1)
#define ADC_AVG_CNT_16 (ADC_CR0_AVCNT_1 | ADC_CR0_AVCNT_0)
#define ADC_AVG_CNT_32 (ADC_CR0_AVCNT_2)
#define ADC_AVG_CNT_64 (ADC_CR0_AVCNT_2 | ADC_CR0_AVCNT_0)
#define ADC_AVG_CNT_128 (ADC_CR0_AVCNT_2 | ADC_CR0_AVCNT_1)
#define ADC_AVG_CNT_256 (ADC_CR0_AVCNT_2 | ADC_CR0_AVCNT_1 | ADC_CR0_AVCNT_0)
/**
* @}
*/
/**
* @defgroup ADC_Sequence_A_Resume_Channel_Position ADC Sequence A Resume Channel Position
* @{
*/
#define ADC_SA_RESUME_POS_INT_CH (0x0U) /*!< Resumes from the interrupt channel of the sequence. */
#define ADC_SA_RESUME_POS_FIRST_CH (ADC_CR1_RSCHSEL) /*!< Resumes from the first channel of the sequence. */
/**
* @}
*/
/**
* @defgroup ADC_Trigger_Source_Type ADC Trigger Source Type
* @{
*/
#define ADC_TRIG_SRC_ADTRG (0x0U) /*!< The trigger source is the falling edge(the low level of the should \
hold at least 1.5*PCLK cycle) of external pin ADTRGx(x=1, 2, 3). */
#define ADC_TRIG_SRC_EVENT0 (ADC_TRGSR_TRGSELA_0) /*!< The trigger source is a internal event from other peripheral. \
Only one event can be configured to trigger ADC. */
#define ADC_TRIG_SRC_EVENT1 (ADC_TRGSR_TRGSELA_1) /*!< The trigger source is a internal event from other peripheral. \
Only one event can be configured to trigger ADC. */
#define ADC_TRIG_SRC_EVENT0_EVENT1 (ADC_TRGSR_TRGSELA_0 | \
ADC_TRGSR_TRGSELA_1) /*!< The trigger source are two internal events from other peripheral(s). \
Two events can be configured to trigger ADC and one of which can trigger the ADC. */
/**
* @}
*/
/**
* @defgroup ADC_Channel_Number ADC Channel Number
* @{
*/
#define ADC_CH_NUM_0 (0U)
#define ADC_CH_NUM_1 (1U)
#define ADC_CH_NUM_2 (2U)
#define ADC_CH_NUM_3 (3U)
#define ADC_CH_NUM_4 (4U)
#define ADC_CH_NUM_5 (5U)
#define ADC_CH_NUM_6 (6U)
#define ADC_CH_NUM_7 (7U)
#define ADC_CH_NUM_8 (8U)
#define ADC_CH_NUM_9 (9U)
#define ADC_CH_NUM_10 (10U)
#define ADC_CH_NUM_11 (11U)
#define ADC_CH_NUM_12 (12U)
#define ADC_CH_NUM_13 (13U)
#define ADC_CH_NUM_14 (14U)
#define ADC_CH_NUM_15 (15U)
#define ADC_CH_NUM_16 (16U)
#define ADC_CH_NUM_17 (17U)
#define ADC_CH_NUM_18 (18U)
#define ADC_CH_NUM_19 (19U)
/**
* @}
*/
/**
* @defgroup ADC_Channel ADC Channel
* @{
*/
#define ADC_CH0 (0x1UL << ADC_CH_NUM_0)
#define ADC_CH1 (0x1UL << ADC_CH_NUM_1)
#define ADC_CH2 (0x1UL << ADC_CH_NUM_2)
#define ADC_CH3 (0x1UL << ADC_CH_NUM_3)
#define ADC_CH4 (0x1UL << ADC_CH_NUM_4)
#define ADC_CH5 (0x1UL << ADC_CH_NUM_5)
#define ADC_CH6 (0x1UL << ADC_CH_NUM_6)
#define ADC_CH7 (0x1UL << ADC_CH_NUM_7)
#define ADC_CH8 (0x1UL << ADC_CH_NUM_8)
#define ADC_CH9 (0x1UL << ADC_CH_NUM_9)
#define ADC_CH10 (0x1UL << ADC_CH_NUM_10)
#define ADC_CH11 (0x1UL << ADC_CH_NUM_11)
#define ADC_CH12 (0x1UL << ADC_CH_NUM_12)
#define ADC_CH13 (0x1UL << ADC_CH_NUM_13)
#define ADC_CH14 (0x1UL << ADC_CH_NUM_14)
#define ADC_CH15 (0x1UL << ADC_CH_NUM_15)
#define ADC_CH16 (0x1UL << ADC_CH_NUM_16)
#define ADC_CH17 (0x1UL << ADC_CH_NUM_17)
#define ADC_CH18 (0x1UL << ADC_CH_NUM_18)
#define ADC_CH19 (0x1UL << ADC_CH_NUM_19)
#define ADC_EXT_CH (ADC_CH15)
/**
* @}
*/
/**
* @defgroup ADC_Pin_Number ADC Pin Number
* @{
*/
#define ADC123_IN0 (0U) /*!< PA0 */
#define ADC123_IN1 (1U) /*!< PA1 */
#define ADC123_IN2 (2U) /*!< PA2 */
#define ADC123_IN3 (3U) /*!< PA3 */
#define ADC12_IN4 (4U) /*!< PA4 */
#define ADC12_IN5 (5U) /*!< PA5 */
#define ADC12_IN6 (6U) /*!< PA6 */
#define ADC12_IN7 (7U) /*!< PA7 */
#define ADC12_IN8 (8U) /*!< PB0 */
#define ADC12_IN9 (9U) /*!< PB1 */
#define ADC123_IN10 (10U) /*!< PC0 */
#define ADC123_IN11 (11U) /*!< PC1 */
#define ADC123_IN12 (12U) /*!< PC2 */
#define ADC123_IN13 (13U) /*!< PC3 */
#define ADC12_IN14 (14U) /*!< PC4 */
#define ADC12_IN15 (15U) /*!< PC5 */
#define ADC3_IN4 (4U) /*!< PF6 */
#define ADC3_IN5 (5U) /*!< PF7 */
#define ADC3_IN6 (6U) /*!< PF8 */
#define ADC3_IN7 (7U) /*!< PF9 */
#define ADC3_IN8 (8U) /*!< PF10 */
#define ADC3_IN9 (9U) /*!< PF3 */
#define ADC3_IN14 (14U) /*!< PF4 */
#define ADC3_IN15 (15U) /*!< PF5 */
#define ADC3_IN16 (16U) /*!< PH2 */
#define ADC3_IN17 (17U) /*!< PH3 */
#define ADC3_IN18 (18U) /*!< PH4 */
#define ADC3_IN19 (19U) /*!< PH5 */
/**
* @}
*/
/**
* @defgroup ADC_All_Channels_Mask ADC All Channels Mask
* @{
*/
#define ADC1_CH_ALL (0xFFFFUL)
#define ADC2_CH_ALL (0xFFFFUL)
#define ADC3_CH_ALL (0xFFFFFUL)
#define ADC_CH_REMAP_ALL (0xFFFFUL)
/**
* @}
*/
/**
* @defgroup ADC_Channel_Count ADC Channel Count
* @{
*/
#define ADC1_CH_COUNT (16U)
#define ADC2_CH_COUNT (16U)
#define ADC3_CH_COUNT (20U)
/**
* @}
*/
/**
* @defgroup ADC_Invalid_Value ADC Invalid Value
* @{
*/
#define ADC_INVALID_VAL (0xFFFFU)
/**
* @}
*/
/**
* @defgroup ADC_Extend_Channel_Source ADC Extend Channel Source
* @{
*/
#define ADC_EXCH_SRC_ADC_PIN (0x0U) /*!< The input source of the extended channel is analog input pin. */
#define ADC_EXCH_SRC_INTERNAL (ADC_EXCHSELR_EXCHSEL) /*!< The input source of the extended channel is internal analog signal. */
/**
* @}
*/
/**
* @defgroup ADC_Sequence_Status_Flag ADC Sequence Status Flag
* @{
*/
#define ADC_SEQ_FLAG_EOCA (ADC_ISR_EOCAF) /*!< Status flag of the end of conversion of sequence A. */
#define ADC_SEQ_FLAG_EOCB (ADC_ISR_EOCBF) /*!< Status flag of the end of conversion of sequence B. */
#define ADC_SEQ_FLAG_NESTED (ADC_ISR_SASTPDF) /*!< Status flag of sequence A was interrupted by sequence B. */
#define ADC_SEQ_FLAG_ALL (ADC_SEQ_FLAG_EOCA | \
ADC_SEQ_FLAG_EOCB | \
ADC_SEQ_FLAG_NESTED)
/**
* @}
*/
/**
* @defgroup ADC_Synchronous_Unit ADC Synchronous Unit
* @{
*/
#define ADC_SYNC_ADC1_ADC2 (0U) /*!< ADC1 and ADC2 work synchronously. */
#define ADC_SYNC_ADC1_ADC2_ADC3 (ADC_SYNCCR_SYNCMD_0) /*!< ADC1, ADC2 and ADC3 work synchronously. */
/**
* @}
*/
/**
* @defgroup ADC_Synchronous_Mode ADC Synchronous Mode
* @{
*/
#define ADC_SYNC_SSHOT_SEQUENTIAL (0U) /*!< Single shot trigger, sequentially trigger. \
When the trigger condition occurs, ADC1 starts before ADC2, \
and ADC1 and ADC2 only perform one sample conversion. */
#define ADC_SYNC_SSHOT_SIMULTANEOUS (ADC_SYNCCR_SYNCMD_1) /*!< Single shot trigger, simultaneously trigger. \
When the trigger condition occurs, ADC1 and ADC2 start at the same time, \
and ADC1 and ADC2 only perform one sample conversion. */
#define ADC_SYNC_CONT_SEQUENTIAL (ADC_SYNCCR_SYNCMD_2) /*!< Continuously trigger, sequentially trigger. \
When the trigger condition occurs, ADC1 starts before ADC2, \
and ADC1 and ADC2 will continue to sample conversion until stoped by software. */
#define ADC_SYNC_CONT_SIMULTANEOUS (ADC_SYNCCR_SYNCMD_2 | \
ADC_SYNCCR_SYNCMD_1) /*!< Continuously trigger, simultaneously trigger. \
When the trigger condition occurs, ADC1 and ADC2 start at the same time, \
and ADC1 and ADC2 will continue to sample conversion until stoped by software. */
/**
* @}
*/
/**
* @defgroup ADC_AWD_Comparison_Mode ADC AWD(Analog Watchdog) Comparison Mode
* @{
*/
#define ADC_AWD_CMP_OUT_RANGE (0x0U) /*!< ADCVal > UpperLimit or ADCVal < LowerLimit */
#define ADC_AWD_CMP_IN_RANGE (0x1U) /*!< LowerLimit < ADCVal < UpperLimit */
/**
* @}
*/
/**
* @defgroup ADC_AWD_Combination_Mode ADC AWD(Analog Watchdog) Combination Mode
* @note If combination mode is valid(ADC_AWD_COMB_OR/ADC_AWD_COMB_AND/ADC_AWD_COMB_XOR) and
the Channels selected by the AWD0 and AWD1 are deferent, make sure that the channel
of AWD1 is converted after the channel conversion of AWD0 ends.
* @{
*/
#define ADC_AWD_COMB_OR (ADC_AWDCR_AWDCM_0) /*!< The status of AWD0 is set or the status of AWD1 is set, the status of combination mode is set. */
#define ADC_AWD_COMB_AND (ADC_AWDCR_AWDCM_1) /*!< The status of AWD0 is set and the status of AWD1 is set, the status of combination mode is set. */
#define ADC_AWD_COMB_XOR (ADC_AWDCR_AWDCM_1 | \
ADC_AWDCR_AWDCM_0) /*!< Only one of the status of AWD0 and AWD1 is set, the status of combination mode is set. */
/**
* @}
*/
/**
* @defgroup ADC_AWD_Status_Flag ADC AWD Status Flag
* @{
*/
#define ADC_AWD_FLAG_AWD0 (ADC_AWDSR_AWD0F) /*!< Flag of AWD0. */
#define ADC_AWD_FLAG_AWD1 (ADC_AWDSR_AWD1F) /*!< Flag of AWD1. */
#define ADC_AWD_FLAG_COMB (ADC_AWDSR_AWDCMF) /*!< Flag of combination of mode. */
#define ADC_AWD_FLAG_ALL (ADC_AWD_FLAG_AWD0 | \
ADC_AWD_FLAG_AWD1 | \
ADC_AWD_FLAG_COMB)
/**
* @}
*/
/**
* @defgroup ADC_PGA_Gain_Factor ADC PGA Gain Factor
* @{
*/
#define ADC_PGA_GAIN_2 (0U) /*!< PGA gain factor is 2. */
#define ADC_PGA_GAIN_2P133 (ADC_PGACR3_PGAGAIN_0) /*!< PGA gain factor is 2.133. */
#define ADC_PGA_GAIN_2P286 (ADC_PGACR3_PGAGAIN_1) /*!< PGA gain factor is 2.286. */
#define ADC_PGA_GAIN_2P667 (ADC_PGACR3_PGAGAIN_1 | \
ADC_PGACR3_PGAGAIN_0) /*!< PGA gain factor is 2.667. */
#define ADC_PGA_GAIN_2P909 (ADC_PGACR3_PGAGAIN_2) /*!< PGA gain factor is 2.909. */
#define ADC_PGA_GAIN_3P2 (ADC_PGACR3_PGAGAIN_2 | \
ADC_PGACR3_PGAGAIN_0) /*!< PGA gain factor is 3.2. */
#define ADC_PGA_GAIN_3P556 (ADC_PGACR3_PGAGAIN_2 | \
ADC_PGACR3_PGAGAIN_1) /*!< PGA gain factor is 2.556. */
#define ADC_PGA_GAIN_4 (ADC_PGACR3_PGAGAIN_2 | \
ADC_PGACR3_PGAGAIN_1 | \
ADC_PGACR3_PGAGAIN_0) /*!< PGA gain factor is 4. */
#define ADC_PGA_GAIN_4P571 (ADC_PGACR3_PGAGAIN_3) /*!< PGA gain factor is 4.571. */
#define ADC_PGA_GAIN_5P333 (ADC_PGACR3_PGAGAIN_3 | \
ADC_PGACR3_PGAGAIN_0) /*!< PGA gain factor is 5.333. */
#define ADC_PGA_GAIN_6P4 (ADC_PGACR3_PGAGAIN_3 | \
ADC_PGACR3_PGAGAIN_1) /*!< PGA gain factor is 6.4. */
#define ADC_PGA_GAIN_8 (ADC_PGACR3_PGAGAIN_3 | \
ADC_PGACR3_PGAGAIN_1 | \
ADC_PGACR3_PGAGAIN_0) /*!< PGA gain factor is 8. */
#define ADC_PGA_GAIN_10P667 (ADC_PGACR3_PGAGAIN_3 | \
ADC_PGACR3_PGAGAIN_2) /*!< PGA gain factor is 10.667. */
#define ADC_PGA_GAIN_16 (ADC_PGACR3_PGAGAIN_3 | \
ADC_PGACR3_PGAGAIN_2 | \
ADC_PGACR3_PGAGAIN_0) /*!< PGA gain factor is 16. */
#define ADC_PGA_GAIN_32 (ADC_PGACR3_PGAGAIN_3 | \
ADC_PGACR3_PGAGAIN_2 | \
ADC_PGACR3_PGAGAIN_1) /*!< PGA gain factor is 32. */
/**
* @}
*/
/**
* @defgroup ADC_PGA_VSS ADC PGA VSS
* @{
*/
#define ADC_PGA_VSS_PGAVSS (0U) /*!< Use pin PGAx_VSS as the reference GND of PGAx */
#define ADC_PGA_VSS_AVSS (1U) /*!< Use AVSS as the reference GND of PGAx. */
/**
* @}
*/
/**
* @defgroup ADC_PGA_Unit ADC PGA Unit
* @{
*/
#define ADC_PGA_1 (0U) /*!< PGA1, belongs to ADC1. Input pin is ADC123_IN0. */
#define ADC_PGA_2 (1U) /*!< PGA2, belongs to ADC1. Input pin is ADC123_IN1. */
#define ADC_PGA_3 (2U) /*!< PGA3, belongs to ADC1. Input pin is ADC123_IN2. */
#define ADC_PGA_4 (3U) /*!< PGA4, belongs to ADC2. Input pin is ADC12_IN6. */
/**
* @}
*/
/**
* @defgroup ADC_Common_Trigger_Sel ADC Common Trigger Source Select
* @{
*/
#define ADC_COM_TRIG1 (AOS_ADC_1_ITRGSELR_COMTRG_EN_0)
#define ADC_COM_TRIG2 (AOS_ADC_1_ITRGSELR_COMTRG_EN_1)
/**
* @}
*/
/**
* @}
*/
/*******************************************************************************
* Global variable definitions ('extern')
******************************************************************************/
/*******************************************************************************
Global function prototypes (definition in C source)
******************************************************************************/
/**
* @addtogroup ADC_Global_Functions
* @{
*/
en_result_t ADC_Init(M4_ADC_TypeDef *ADCx, const stc_adc_init_t *pstcInit);
void ADC_DeInit(M4_ADC_TypeDef *ADCx);
en_result_t ADC_StructInit(stc_adc_init_t *pstcInit);
void ADC_SetScanMode(M4_ADC_TypeDef *ADCx, uint16_t u16Mode);
en_result_t ADC_ChannelCmd(M4_ADC_TypeDef *ADCx, uint8_t u8Seq, \
uint32_t u32AdcCh, const uint8_t pu8SplTime[], \
en_functional_state_t enNewState);
void ADC_AvgChannelConfig(M4_ADC_TypeDef *ADCx, uint16_t u16AvgCnt);
void ADC_AvgChannelCmd(M4_ADC_TypeDef *ADCx, uint32_t u32AdcCh, en_functional_state_t enNewState);
void ADC_SetExChannelSrc(M4_ADC_TypeDef *ADCx, uint8_t u8ExChSrc);
en_result_t ADC_TrigSrcStructInit(stc_adc_trig_cfg_t *pstcCfg);
en_result_t ADC_TrigSrcConfig(M4_ADC_TypeDef *ADCx, uint8_t u8Seq, const stc_adc_trig_cfg_t *pstcCfg);
void ADC_TrigSrcCmd(M4_ADC_TypeDef *ADCx, uint8_t u8Seq, en_functional_state_t enNewState);
void ADC_ComTriggerCmd(M4_ADC_TypeDef *ADCx, uint16_t u16TrigSrc, \
uint32_t u32ComTrig, en_functional_state_t enNewState);
void ADC_SeqIntCmd(M4_ADC_TypeDef *ADCx, uint8_t u8Seq, en_functional_state_t enNewState);
en_flag_status_t ADC_SeqGetStatus(const M4_ADC_TypeDef *ADCx, uint8_t u8Flag);
void ADC_SeqClrStatus(M4_ADC_TypeDef *ADCx, uint8_t u8Flag);
en_result_t ADC_AWD_Config(M4_ADC_TypeDef *ADCx, uint8_t u8AWDx, const stc_adc_awd_cfg_t *pstcCfg);
void ADC_AWD_CombModeCmd(M4_ADC_TypeDef *ADCx, uint16_t u16CombMode, en_functional_state_t enNewState);
void ADC_AWD_Cmd(M4_ADC_TypeDef *ADCx, uint8_t u8AWDx, en_functional_state_t enNewState);
void ADC_AWD_IntCmd(M4_ADC_TypeDef *ADCx, uint8_t u8AWDx, en_functional_state_t enNewState);
en_flag_status_t ADC_AWD_GetStatus(const M4_ADC_TypeDef *ADCx, uint8_t u8Flag);
void ADC_AWD_ClrStatus(M4_ADC_TypeDef *ADCx, uint8_t u8Flag);
void ADC_PGA_Config(uint8_t u8PGAx, uint8_t u8GainFactor, uint8_t u8PgaVss);
void ADC_PGA_Cmd(uint8_t u8PGAx, en_functional_state_t enNewState);
void ADC_SYNC_Config(uint16_t u16SyncUnit, uint16_t u16SyncMode, uint8_t u8TrigDelay);
void ADC_SYNC_Cmd(en_functional_state_t enNewState);
void ADC_SH_Config(uint8_t u8SplTime);
void ADC_SH_ChannelCmd(uint32_t u32AdcCh, en_functional_state_t enNewState);
void ADC_ChannelRemap(M4_ADC_TypeDef *ADCx, uint32_t u32AdcCh, uint8_t u8AdcPinNum);
uint8_t ADC_GetChannelPinNum(const M4_ADC_TypeDef *ADCx, uint32_t u32AdcCh);
en_result_t ADC_PollingSA(M4_ADC_TypeDef *ADCx, uint16_t pu16AdcVal[], uint8_t u8Length, uint32_t u32Timeout);
void ADC_Start(M4_ADC_TypeDef *ADCx);
void ADC_Stop(M4_ADC_TypeDef *ADCx);
en_result_t ADC_GetAllData(const M4_ADC_TypeDef *ADCx, uint16_t pu16AdcVal[], uint8_t u8Length);
en_result_t ADC_GetChannelData(const M4_ADC_TypeDef *ADCx, uint32_t u32TargetCh, \
uint16_t pu16AdcVal[], uint8_t u8Length);
uint16_t ADC_GetValue(const M4_ADC_TypeDef *ADCx, uint8_t u8ChNum);
/**
* @}
*/
#endif /* DDL_ADC_ENABLE */
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __HC32F4A0_ADC_H__ */
/*******************************************************************************
* EOF (not truncated)
******************************************************************************/