rt-thread/components/net/sal_socket/include/sal_socket.h

/*
 * File      : sal_socket.h
 * This file is part of RT-Thread RTOS
 * COPYRIGHT (C) 2006 - 2018, RT-Thread Development Team
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License along
 *  with this program; if not, write to the Free Software Foundation, Inc.,
 *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 *
 * Change Logs:
 * Date           Author       Notes
 * 2018-05-24     ChenYong     First version
 */

#ifndef SAL_SOCKET_H__
#define SAL_SOCKET_H__

#include "sal_ipaddr.h"

#ifdef __cplusplus
extern "C" {
#endif

#if !defined(socklen_t) && !defined(SOCKLEN_T_DEFINED)
typedef uint32_t socklen_t;
#endif

#if !defined(sa_family_t) && !defined(SA_FAMILY_T_DEFINED)
typedef uint8_t sa_family_t;
#endif

/* If your port already typedef's in_port_t, define IN_PORT_T_DEFINED
   to prevent this code from redefining it. */
#if !defined(in_port_t) && !defined(IN_PORT_T_DEFINED)
typedef uint16_t in_port_t;
#endif

/* Socket protocol types (TCP/UDP/RAW) */
#define SOCK_STREAM     1
#define SOCK_DGRAM      2
#define SOCK_RAW        3

#define SOCK_MAX        (SOCK_RAW + 1)

/* Option flags per-socket. These must match the SOF_ flags in ip.h (checked in init.c) */
#define SO_REUSEADDR    0x0004 /* Allow local address reuse */
#define SO_KEEPALIVE    0x0008 /* keep connections alive */
#define SO_BROADCAST    0x0020 /* permit to send and to receive broadcast messages (see IP_SOF_BROADCAST option) */

/* Additional options, not kept in so_options */
#define SO_DEBUG        0x0001 /* Unimplemented: turn on debugging info recording */
#define SO_ACCEPTCONN   0x0002 /* socket has had listen() */
#define SO_DONTROUTE    0x0010 /* Unimplemented: just use interface addresses */
#define SO_USELOOPBACK  0x0040 /* Unimplemented: bypass hardware when possible */
#define SO_LINGER       0x0080 /* linger on close if data present */
#define SO_DONTLINGER   ((int)(~SO_LINGER))
#define SO_OOBINLINE    0x0100 /* Unimplemented: leave received OOB data in line */
#define SO_REUSEPORT    0x0200 /* Unimplemented: allow local address & port reuse */
#define SO_SNDBUF       0x1001 /* Unimplemented: send buffer size */
#define SO_RCVBUF       0x1002 /* receive buffer size */
#define SO_SNDLOWAT     0x1003 /* Unimplemented: send low-water mark */
#define SO_RCVLOWAT     0x1004 /* Unimplemented: receive low-water mark */
#define SO_SNDTIMEO     0x1005 /* send timeout */
#define SO_RCVTIMEO     0x1006 /* receive timeout */
#define SO_ERROR        0x1007 /* get error status and clear */
#define SO_TYPE         0x1008 /* get socket type */
#define SO_CONTIMEO     0x1009 /* Unimplemented: connect timeout */
#define SO_NO_CHECK     0x100a /* don't create UDP checksum */

/* Level number for (get/set)sockopt() to apply to socket itself */
#define  SOL_SOCKET     0xfff    /* options for socket level */

#define AF_UNSPEC       0
#define AF_INET         2
#define AF_INET6        10
#define AF_CAN          29  /* Controller Area Network      */
#define AF_AT           45  /* AT socket */
#define AF_WIZ          46  /* WIZnet socket */
#define PF_INET         AF_INET
#define PF_INET6        AF_INET6
#define PF_UNSPEC       AF_UNSPEC
#define PF_CAN          AF_CAN
#define PF_AT           AF_AT
#define PF_WIZ          AF_WIZ

#define AF_MAX          (AF_WIZ + 1)  /* For now.. */

#define IPPROTO_IP      0
#define IPPROTO_ICMP    1
#define IPPROTO_TCP     6
#define IPPROTO_UDP     17
#define IPPROTO_IPV6    41
#define IPPROTO_ICMPV6  58
#define IPPROTO_UDPLITE 136
#define IPPROTO_RAW     255

/* Flags we can use with send and recv */
#define MSG_PEEK        0x01    /* Peeks at an incoming message */
#define MSG_WAITALL     0x02    /* Unimplemented: Requests that the function block until the full amount of data requested can be returned */
#define MSG_OOB         0x04    /* Unimplemented: Requests out-of-band data. The significance and semantics of out-of-band data are protocol-specific */
#define MSG_DONTWAIT    0x08    /* Nonblocking i/o for this operation only */
#define MSG_MORE        0x10    /* Sender will send more */

/* Options for level IPPROTO_TCP */
#define TCP_NODELAY     0x01    /* don't delay send to coalesce packets */
#define TCP_KEEPALIVE   0x02    /* send KEEPALIVE probes when idle for pcb->keep_idle milliseconds */
#define TCP_KEEPIDLE    0x03    /* set pcb->keep_idle  - Same as TCP_KEEPALIVE, but use seconds for get/setsockopt */
#define TCP_KEEPINTVL   0x04    /* set pcb->keep_intvl - Use seconds for get/setsockopt */
#define TCP_KEEPCNT     0x05    /* set pcb->keep_cnt   - Use number of probes sent for get/setsockopt */

/* Options and types related to multicast membership */
#define IP_ADD_MEMBERSHIP  3
#define IP_DROP_MEMBERSHIP 4

typedef struct ip_mreq
{
    struct in_addr imr_multiaddr; /* IP multicast address of group */
    struct in_addr imr_interface; /* local IP address of interface */
} ip_mreq;

/* Options for shatdown type */
#ifndef SHUT_RD
  #define SHUT_RD       0
  #define SHUT_WR       1
  #define SHUT_RDWR     2
#endif

struct sockaddr
{
    uint8_t        sa_len;
    sa_family_t    sa_family;
    char           sa_data[14];
};

/* members are in network byte order */
struct sockaddr_in
{
    uint8_t        sin_len;
    sa_family_t    sin_family;
    in_port_t      sin_port;
    struct in_addr sin_addr;
#define SIN_ZERO_LEN 8
    char            sin_zero[SIN_ZERO_LEN];
};

struct sockaddr_storage
{
    uint8_t        s2_len;
    sa_family_t    ss_family;
    char           s2_data1[2];
    uint32_t       s2_data2[3];
#if SAL_IPV6
    u32_t          s2_data3[3];
#endif /* SAL_IPV6 */
};

int sal_accept(int socket, struct sockaddr *addr, socklen_t *addrlen);
int sal_bind(int socket, const struct sockaddr *name, socklen_t namelen);
int sal_shutdown(int socket, int how);
int sal_getpeername (int socket, struct sockaddr *name, socklen_t *namelen);
int sal_getsockname (int socket, struct sockaddr *name, socklen_t *namelen);
int sal_getsockopt (int socket, int level, int optname, void *optval, socklen_t *optlen);
int sal_setsockopt (int socket, int level, int optname, const void *optval, socklen_t optlen);
int sal_connect(int socket, const struct sockaddr *name, socklen_t namelen);
int sal_listen(int socket, int backlog);
int sal_recvfrom(int socket, void *mem, size_t len, int flags,
      struct sockaddr *from, socklen_t *fromlen);
int sal_sendto(int socket, const void *dataptr, size_t size, int flags,
    const struct sockaddr *to, socklen_t tolen);
int sal_socket(int domain, int type, int protocol);
int sal_closesocket(int socket);
int sal_ioctlsocket(int socket, long cmd, void *arg);

#ifdef __cplusplus
}
#endif

#endif /* SAL_SOCKET_H__ */