rt-thread/bsp/lpc5410x/Libraries/lpc_chip/chip_5410x/cpuctrl_5410x.h

99 lines
3.4 KiB
C
Raw Normal View History

2014-12-16 19:54:29 +08:00
/*
* @brief LPC5410X CPU multi-core support driver
*
* @note
* Copyright(C) NXP Semiconductors, 2014
* All rights reserved.
*
* @par
* Software that is described herein is for illustrative purposes only
* which provides customers with programming information regarding the
* LPC products. This software is supplied "AS IS" without any warranties of
* any kind, and NXP Semiconductors and its licensor disclaim any and
* all warranties, express or implied, including all implied warranties of
* merchantability, fitness for a particular purpose and non-infringement of
* intellectual property rights. NXP Semiconductors assumes no responsibility
* or liability for the use of the software, conveys no license or rights under any
* patent, copyright, mask work right, or any other intellectual property rights in
* or to any products. NXP Semiconductors reserves the right to make changes
* in the software without notification. NXP Semiconductors also makes no
* representation or warranty that such application will be suitable for the
* specified use without further testing or modification.
*
* @par
* Permission to use, copy, modify, and distribute this software and its
* documentation is hereby granted, under NXP Semiconductors' and its
* licensor's relevant copyrights in the software, without fee, provided that it
* is used in conjunction with NXP Semiconductors microcontrollers. This
* copyright, permission, and disclaimer notice must appear in all copies of
* this code.
*/
#ifndef __CPUCTRL_5410X_H_
#define __CPUCTRL_5410X_H_
#ifdef __cplusplus
extern "C" {
#endif
/** @defgroup CPUCTRL_5410X CHIP: LPC5410X CPU multi-core support driver
* @ingroup CHIP_5410X_DRIVERS
* This driver helps with determine which MCU core the software is running,
* whether the MCU core is in master or slave mode, and provides functions
* for master and slave core control.<br>
*
* The functions for the driver are provided as part of the
* @ref POWER_LIBRARY_5410X library. For more information on using the
* LPC5410x LPCopen package with multi-core, see @ref CHIP_5410X_MULTICORE<br>.
* @{
*/
/**
* @brief Determine which MCU this code is running on
* @return true if executing on the CM4, or false if executing on the CM0+
*/
STATIC INLINE bool Chip_CPU_IsM4Core(void) {
/* M4 core is designated by values 0xC24 on bits 15..4 */
if (((SCB->CPUID >> 4) & 0xFFF) == 0xC24) {
return true;
}
return false;
}
/**
* @brief Determine if this core is a slave or master
* @return true if this MCU is operating as the master, or false if operating as a slave
*/
bool Chip_CPU_IsMasterCore(void);
/**
* @brief Setup M0+ boot and reset M0+ core
* @param coentry : Pointer to boot entry point for M0+ core
* @param costackptr : Pointer to where stack should be located for M0+ core
* @return Nothing
* @note Will setup boot stack and entry point, enable M0+ clock and then
* reset M0+ core.
*/
void Chip_CPU_CM0Boot(uint32_t *coentry, uint32_t *costackptr);
/**
* @brief Setup M4 boot and reset M4 core
* @param coentry : Pointer to boot entry point for M4 core
* @param costackptr : Pointer to where stack should be located for M4 core
* @return Nothing
* @note Will setup boot stack and entry point, enable M4 clock and then
* reset M0+ core.
*/
void Chip_CPU_CM4Boot(uint32_t *coentry, uint32_t *costackptr);
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __CPUCTRL_5410X_H_ */