rt-thread/bsp/hc32f460/Libraries/HC32F460_StdPeriph_Driver/inc/hc32f460_crc.h

119 lines
4.8 KiB
C
Raw Normal View History

/*******************************************************************************
* Copyright (C) 2020, Huada Semiconductor Co., Ltd. All rights reserved.
*
* This software component is licensed by HDSC under BSD 3-Clause license
* (the "License"); You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*/
/******************************************************************************/
/** \file hc32f460_crc.h
**
** A detailed description is available at
** @link CrcGroup Crc description @endlink
**
** - 2019-03-07 CDT First version for Device Driver Library of Crc.
**
******************************************************************************/
#ifndef __HC32F460_CRC_H__
#define __HC32F460_CRC_H__
/*******************************************************************************
* Include files
******************************************************************************/
#include "hc32_common.h"
#include "ddl_config.h"
#if (DDL_CRC_ENABLE == DDL_ON)
/* C binding of definitions if building with C++ compiler */
#ifdef __cplusplus
extern "C"
{
#endif
/**
*******************************************************************************
** \defgroup CrcGroup Cyclic Redundancy Check(CRC)
**
******************************************************************************/
//@{
/*******************************************************************************
* Global type definitions ('typedef')
******************************************************************************/
/* Bits definitions of CRC control register(CRC_CR). */
/*
* Definitions of CRC protocol.
* NOTE: CRC16 polynomial is X16 + X12 + X5 + 1
* CRC32 polynomial is X32 + X26 + X23 + X22 + X16 + X12 + X11 + X10 + \
* X8 + X7 + X5 + X4 + X2 + X + 1
*/
#define CRC_SEL_16B ((uint32_t)0x0)
#define CRC_SEL_32B ((uint32_t)(0x1ul << 1u))
/*
* Identifies the transpose configuration of the source data.
* If this function is enabled, the source data's bits in bytes are transposed.
* e.g. There's a source data 0x1234 which will be calculated checksum and this
* function is enabled, the final data be calculated is 0x482C.
* 0x12: bit0->bit7, bit1->bit6, ..., bit7->bit0, the data byte changed to 0x48.
* 0x48: bit0->bit7, bit1->bit6, ..., bit7->bit0, the data byte changed to 0x2C.
* The same to 32 bit data while using CRC32.
*/
#define CRC_REFIN_DISABLE ((uint32_t)0x0)
#define CRC_REFIN_ENABLE ((uint32_t)(0x1ul << 2u))
/*
* Identifies the transpose configuration of the checksum.
* If this function is enabled, bits of the checksum will be transposed.
* e.g. There is a CRC16 checksum is 0x5678 before this function enabled, then
* this function is enabled, the checksum will be 0x1E6A.
* 0x5678: bit0->bit15, bit1->bit14, ..., bit15->bit0, the final data is 0x1E6A.
* The same to CRC32 checksum while using CRC32.
*/
#define CRC_REFOUT_DISABLE ((uint32_t)0x0)
#define CRC_REFOUT_ENABLE ((uint32_t)(0x1ul << 3u))
/*
* XORs the CRC checksum with 0xFFFF(CRC16) or 0xFFFFFFFF(CRC32).
* e.g. There is a CRC16 checksum is 0x5678 before this function enabled.
* If this function enabled, the checksum will be 0xA987.
* The same to CRC32 checksum while using CRC32.
*/
#define CRC_XOROUT_DISABLE ((uint32_t)0x0)
#define CRC_XOROUT_ENABLE ((uint32_t)(0x1ul << 4u))
#define CRC_CONFIG_MASK ((uint32_t)(0x1Eu))
/*******************************************************************************
* Global pre-processor symbols/macros ('#define')
******************************************************************************/
/*******************************************************************************
* Global variable definitions ('extern')
******************************************************************************/
/*******************************************************************************
* Global function prototypes (definition in C source)
******************************************************************************/
void CRC_Init(uint32_t u32Config);
uint16_t CRC_Calculate16B(uint16_t u16InitVal, const uint16_t *pu16Data, uint32_t u32Length);
uint32_t CRC_Calculate32B(uint32_t u32InitVal, const uint32_t *pu32Data, uint32_t u32Length);
bool CRC_Check16B(uint16_t u16InitVal, uint16_t u16CheckSum, const uint16_t *pu16Data, uint32_t u32Length);
bool CRC_Check32B(uint32_t u32InitVal, uint32_t u32CheckSum, const uint32_t *pu32Data, uint32_t u32Length);
//@} // CrcGroup
#ifdef __cplusplus
}
#endif
#endif /* DDL_CRC_ENABLE */
#endif /* __HC32F460_CRC_H__ */
/*******************************************************************************
* EOF (not truncated)
******************************************************************************/