libs/rt-thread
libs
/
rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
rt-thread/bsp/at32/at32f407-start/board/msp/system_at32f4xx.c

3447 lines
95 KiB
C
Raw Normal View History

[bsp/at32] remove notes
2021-04-13 10:17:09 +08:00
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2021-04-13 shelton first version
*/
[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver
2020-05-26 14:49:09 +08:00
/** @addtogroup CMSIS
* @{
*/
/** @addtogroup at32f4xx_system
* @{
*/
/** @addtogroup at32f4xx_System_Private_Includes
* @{
*/
#include "at32f4xx.h"
/**
* @}
*/
/** @addtogroup at32f4xx_System_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @addtogroup at32f4xx_System_Private_Defines
* @{
*/
/*!< Uncomment the line corresponding to the desired System clock (SYSCLK)
frequency (after reset the HSI is used as SYSCLK source)
IMPORTANT NOTE:
==============
1. After each device reset the HSI is used as System clock source.
2. Please make sure that the selected System clock doesn't exceed your device's
maximum frequency.
3. If none of the define below is enabled, the HSI is used as System clock
source.
4. The System clock configuration functions provided within this file assume that:
- For at32f4xx devices, an external 8MHz crystal is used to drive the System clock.
If you are using different crystal you have to adapt those functions accordingly.
Clock (MHz)
PLL from HSE or HSI
[at32] auto formatted
2021-03-14 15:15:52 +08:00
SYSCLK HCLK PCLK2 PCLK1
24 24 24 24
36 36 36 36
48 48 48 24
56 56 56 28
72 72 72 36
96 96 48 48
108 108 54 54
120 120 60 60
144 144 72 72
150 150 75 75
168 168 84 84
176 176 88 88
192 192 96 96
200 200 100 100
224 224 112 112
240 240 120 120
[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver
2020-05-26 14:49:09 +08:00
*/
#if defined (AT32F403xx) || defined (AT32F413xx) || \
defined (AT32F415xx) || defined (AT32F403Axx)|| \
defined (AT32F407xx)
/* #define SYSCLK_FREQ_HSE HSE_VALUE */
/* #define SYSCLK_FREQ_24MHz 24000000 */
/* #define SYSCLK_FREQ_36MHz 36000000 */
/* #define SYSCLK_FREQ_48MHz 48000000 */
/* #define SYSCLK_FREQ_56MHz 56000000 */
/* #define SYSCLK_FREQ_72MHz 72000000 */
/* #define SYSCLK_FREQ_96MHz 96000000 */
/* #define SYSCLK_FREQ_108MHz 108000000 */
/* #define SYSCLK_FREQ_120MHz 120000000 */
/* #define SYSCLK_FREQ_144MHz 144000000 */
/* #define SYSCLK_FREQ_24MHz_HSI 24000000 */
/* #define SYSCLK_FREQ_36MHz_HSI 36000000 */
/* #define SYSCLK_FREQ_48MHz_HSI 48000000 */
/* #define SYSCLK_FREQ_56MHz_HSI 56000000 */
/* #define SYSCLK_FREQ_72MHz_HSI 72000000 */
/* #define SYSCLK_FREQ_96MHz_HSI 96000000 */
/* #define SYSCLK_FREQ_108MHz_HSI 108000000 */
/* #define SYSCLK_FREQ_120MHz_HSI 120000000 */
/* #define SYSCLK_FREQ_144MHz_HSI 144000000 */
#endif
#if defined (AT32F415xx)
/* #define SYSCLK_FREQ_150MHz 150000000 */
/* #define SYSCLK_FREQ_150MHz_HSI 150000000 */
#endif
#if defined (AT32F403xx) || defined (AT32F413xx) || \
defined (AT32F403Axx)|| defined (AT32F407xx)
/* #define SYSCLK_FREQ_168MHz 168000000 */
/* #define SYSCLK_FREQ_176MHz 176000000 */
/* #define SYSCLK_FREQ_192MHz 192000000 */
#define SYSCLK_FREQ_200MHz 200000000
/* #define SYSCLK_FREQ_168MHz_HSI 168000000 */
/* #define SYSCLK_FREQ_176MHz_HSI 176000000 */
/* #define SYSCLK_FREQ_192MHz_HSI 192000000 */
/* #define SYSCLK_FREQ_200MHz_HSI 200000000 */
#endif
#if defined (AT32F403Axx)|| defined (AT32F407xx)
/* #define SYSCLK_FREQ_224MHz 224000000 */
/* #define SYSCLK_FREQ_240MHz 240000000 */
/* #define SYSCLK_FREQ_224MHz_HSI 224000000 */
/* #define SYSCLK_FREQ_240MHz_HSI 240000000 */
#endif
/*!< Uncomment the following line if you need to use external SRAM mounted
(AT32 High density and XL-density devices) as data memory */
/* #define DATA_IN_ExtSRAM */
/*!< Uncomment the following line if you need to relocate your vector Table in
Internal SRAM. */
/* #define VECT_TAB_SRAM */
[at32] auto formatted
2021-03-14 15:15:52 +08:00
#define VECT_TAB_OFFSET 0x0 /*!< Vector Table base offset field.
[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver
2020-05-26 14:49:09 +08:00
This value must be a multiple of 0x200. */
/**
* @}
*/
/** @addtogroup at32f4xx_System_Private_Macros
* @{
*/
/**
* @}
*/
/** @addtogroup at32f4xx_System_Private_Variables
* @{
*/
/*******************************************************************************
* Clock Definitions
*******************************************************************************/
#ifdef SYSCLK_FREQ_HSE
uint32_t SystemCoreClock = SYSCLK_FREQ_HSE; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_24MHz
uint32_t SystemCoreClock = SYSCLK_FREQ_24MHz; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_36MHz
uint32_t SystemCoreClock = SYSCLK_FREQ_36MHz; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_48MHz
uint32_t SystemCoreClock = SYSCLK_FREQ_48MHz; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_56MHz
uint32_t SystemCoreClock = SYSCLK_FREQ_56MHz; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_72MHz
uint32_t SystemCoreClock = SYSCLK_FREQ_72MHz; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_96MHz
uint32_t SystemCoreClock = SYSCLK_FREQ_96MHz; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_108MHz
uint32_t SystemCoreClock = SYSCLK_FREQ_108MHz; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_120MHz
uint32_t SystemCoreClock = SYSCLK_FREQ_120MHz; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_144MHz
uint32_t SystemCoreClock = SYSCLK_FREQ_144MHz; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_150MHz
uint32_t SystemCoreClock = SYSCLK_FREQ_150MHz; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_168MHz
uint32_t SystemCoreClock = SYSCLK_FREQ_168MHz; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_176MHz
uint32_t SystemCoreClock = SYSCLK_FREQ_176MHz; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_192MHz
uint32_t SystemCoreClock = SYSCLK_FREQ_192MHz; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_200MHz
uint32_t SystemCoreClock = SYSCLK_FREQ_200MHz; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_224MHz
uint32_t SystemCoreClock = SYSCLK_FREQ_224MHz; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_240MHz
uint32_t SystemCoreClock = SYSCLK_FREQ_240MHz; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_24MHz_HSI
uint32_t SystemCoreClock = SYSCLK_FREQ_24MHz_HSI; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_36MHz_HSI
uint32_t SystemCoreClock = SYSCLK_FREQ_36MHz_HSI; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_48MHz_HSI
uint32_t SystemCoreClock = SYSCLK_FREQ_48MHz_HSI; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_56MHz_HSI
uint32_t SystemCoreClock = SYSCLK_FREQ_56MHz_HSI; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_72MHz_HSI
uint32_t SystemCoreClock = SYSCLK_FREQ_72MHz_HSI; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_96MHz_HSI
uint32_t SystemCoreClock = SYSCLK_FREQ_96MHz_HSI; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_108MHz_HSI
uint32_t SystemCoreClock = SYSCLK_FREQ_108MHz_HSI; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_120MHz_HSI
uint32_t SystemCoreClock = SYSCLK_FREQ_120MHz_HSI; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_144MHz_HSI
uint32_t SystemCoreClock = SYSCLK_FREQ_144MHz_HSI; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_150MHz_HSI
uint32_t SystemCoreClock = SYSCLK_FREQ_150MHz_HSI; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_168MHz_HSI
uint32_t SystemCoreClock = SYSCLK_FREQ_168MHz_HSI; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_176MHz_HSI
uint32_t SystemCoreClock = SYSCLK_FREQ_176MHz_HSI; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_192MHz_HSI
uint32_t SystemCoreClock = SYSCLK_FREQ_192MHz_HSI; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_200MHz_HSI
uint32_t SystemCoreClock = SYSCLK_FREQ_200MHz_HSI; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_224MHz_HSI
uint32_t SystemCoreClock = SYSCLK_FREQ_224MHz_HSI; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_240MHz_HSI
uint32_t SystemCoreClock = SYSCLK_FREQ_240MHz_HSI; /*!< System Clock Frequency (Core Clock) */
#else /*!< HSI Selected as System Clock source */
#define SYSCLK_FREQ_HSI HSI_VALUE
uint32_t SystemCoreClock = HSI_VALUE; /*!< System Clock Frequency (Core Clock) */
#endif
__I uint8_t AHBPscTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
/**
* @}
*/
/** @addtogroup at32f4xx_System_Private_FunctionPrototypes
* @{
*/
static void SetSysClock(void);
#ifdef SYSCLK_FREQ_HSE
static void SetSysClockToHSE(void);
#elif defined SYSCLK_FREQ_24MHz
static void SetSysClockTo24M(void);
#elif defined SYSCLK_FREQ_36MHz
static void SetSysClockTo36M(void);
#elif defined SYSCLK_FREQ_48MHz
static void SetSysClockTo48M(void);
#elif defined SYSCLK_FREQ_56MHz
static void SetSysClockTo56M(void);
#elif defined SYSCLK_FREQ_72MHz
static void SetSysClockTo72M(void);
#elif defined SYSCLK_FREQ_96MHz
static void SetSysClockTo96M(void);
#elif defined SYSCLK_FREQ_108MHz
static void SetSysClockTo108M(void);
#elif defined SYSCLK_FREQ_120MHz
static void SetSysClockTo120M(void);
#elif defined SYSCLK_FREQ_144MHz
static void SetSysClockTo144M(void);
#elif defined SYSCLK_FREQ_150MHz
static void SetSysClockTo150M(void);
#elif defined SYSCLK_FREQ_168MHz
static void SetSysClockTo168M(void);
#elif defined SYSCLK_FREQ_176MHz
static void SetSysClockTo176M(void);
#elif defined SYSCLK_FREQ_192MHz
static void SetSysClockTo192M(void);
#elif defined SYSCLK_FREQ_200MHz
static void SetSysClockTo200M(void);
#elif defined SYSCLK_FREQ_224MHz
static void SetSysClockTo224M(void);
#elif defined SYSCLK_FREQ_240MHz
static void SetSysClockTo240M(void);
#elif defined SYSCLK_FREQ_24MHz_HSI
static void SetSysClockTo24MHSI(void);
#elif defined SYSCLK_FREQ_36MHz_HSI
static void SetSysClockTo36MHSI(void);
#elif defined SYSCLK_FREQ_48MHz_HSI
static void SetSysClockTo48MHSI(void);
#elif defined SYSCLK_FREQ_56MHz_HSI
static void SetSysClockTo56MHSI(void);
#elif defined SYSCLK_FREQ_72MHz_HSI
static void SetSysClockTo72MHSI(void);
#elif defined SYSCLK_FREQ_96MHz_HSI
static void SetSysClockTo96MHSI(void);
#elif defined SYSCLK_FREQ_108MHz_HSI
static void SetSysClockTo108MHSI(void);
#elif defined SYSCLK_FREQ_120MHz_HSI
static void SetSysClockTo120MHSI(void);
#elif defined SYSCLK_FREQ_144MHz_HSI
static void SetSysClockTo144MHSI(void);
#elif defined SYSCLK_FREQ_150MHz_HSI
static void SetSysClockTo150MHSI(void);
#elif defined SYSCLK_FREQ_168MHz_HSI
static void SetSysClockTo168MHSI(void);
#elif defined SYSCLK_FREQ_176MHz_HSI
static void SetSysClockTo176MHSI(void);
#elif defined SYSCLK_FREQ_192MHz_HSI
static void SetSysClockTo192MHSI(void);
#elif defined SYSCLK_FREQ_200MHz_HSI
static void SetSysClockTo200MHSI(void);
#elif defined SYSCLK_FREQ_224MHz_HSI
static void SetSysClockTo224MHSI(void);
#elif defined SYSCLK_FREQ_240MHz_HSI
static void SetSysClockTo240MHSI(void);
#endif
#ifdef DATA_IN_ExtSRAM
static void SystemInit_ExtMemCtrl(void);
#endif /* DATA_IN_ExtSRAM */
/**
* @}
*/
/** @addtogroup at32f4xx_System_Private_Functions
* @{
*/
/**
* @brief Setup the microcontroller system
* Initialize the Embedded Flash Interface, the PLL and update the
* SystemCoreClock variable.
* @note This function should be used only after reset.
* @param None
* @retval None
*/
void SystemInit (void)
{
#if defined (AT32F415xx)
/* Enable low power mode, 0x40007050[bit2] */
RCC_APB1PeriphClockCmd(RCC_APB1PERIPH_PWR, ENABLE);
*(volatile uint8_t *)(0x40007050) |= (uint8_t)(0x1 << 2);
RCC_APB1PeriphClockCmd(RCC_APB1PERIPH_PWR, DISABLE);
#endif
#if defined (__FPU_USED) && (__FPU_USED == 1U)
SCB->CPACR |= ((3U << 10U * 2U) | /* set CP10 Full Access */
(3U << 11U * 2U) ); /* set CP11 Full Access */
#endif
/* Reset the RCC clock configuration to the default reset state(for debug purpose) */
/* Set HSIEN bit */
BIT_SET(RCC->CTRL, RCC_CTRL_HSIEN);
/* Reset SW, AHBPSC, APB1PSC, APB2PSC, ADCPSC and CLKOUT bits */
BIT_CLEAR(RCC->CFG, RCC_CFG_SYSCLKSEL | RCC_CFG_AHBPSC | \
RCC_CFG_APB1PSC | RCC_CFG_APB2PSC | \
RCC_CFG_ADCPSC | RCC_CFG_CLKOUT);
/* Reset HSEEN, HSECFDEN and PLLEN bits */
BIT_CLEAR(RCC->CTRL, RCC_CTRL_HSEEN | RCC_CTRL_HSECFDEN | \
RCC_CTRL_PLLEN);
/* Reset HSEBYPS bit */
BIT_CLEAR(RCC->CTRL, RCC_CTRL_HSEBYPS);
/* Reset PLLRC, PLLHSEPSC, PLLMUL, USBPSC and PLLRANGE bits */
BIT_CLEAR(RCC->CFG, RCC_CFG_PLLRC | RCC_CFG_PLLHSEPSC | \
RCC_CFG_PLLMULT | RCC_CFG_USBPSC | RCC_CFG_PLLRANGE);
/* Reset USB768B, CLKOUT[3], HSICAL_KEY[7:0] */
BIT_CLEAR(RCC->MISC, 0x010100FF);
/* Disable all interrupts and clear pending bits */
RCC->CLKINT = RCC_CLKINT_LSISTBLFC | RCC_CLKINT_LSESTBLFC | \
RCC_CLKINT_HSISTBLFC | RCC_CLKINT_HSESTBLFC | \
RCC_CLKINT_PLLSTBLFC | RCC_CLKINT_HSECFDFC;
#ifdef DATA_IN_ExtSRAM
SystemInit_ExtMemCtrl();
#endif /* DATA_IN_ExtSRAM */
/* Configure the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers */
/* Configure the Flash Latency cycles and enable prefetch buffer */
SetSysClock();
#ifdef VECT_TAB_SRAM
SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */
#else
SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */
#endif
}
/**
* @brief Update SystemCoreClock variable according to Clock Register Values.
* The SystemCoreClock variable contains the core clock (HCLK), it can
* be used by the user application to setup the SysTick timer or configure
* other parameters.
*
* @note Each time the core clock (HCLK) changes, this function must be called
* to update SystemCoreClock variable value. Otherwise, any configuration
* based on this variable will be incorrect.
*
* @note - The system frequency computed by this function is not the real
* frequency in the chip. It is calculated based on the predefined
* constant and the selected clock source:
*
* - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
*
* - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
*
* - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
* or HSI_VALUE(*) multiplied by the PLL factors.
*
* (*) HSI_VALUE is a constant defined in at32f4xx.h file (default value
* 8 MHz) but the real value may vary depending on the variations
* in voltage and temperature.
*
* (**) HSE_VALUE is a constant defined in at32f4xx.h file (default value
* 8 MHz or 25 MHz, depedning on the product used), user has to ensure
* that HSE_VALUE is same as the real frequency of the crystal used.
* Otherwise, this function may have wrong result.
*
* - The result of this function could be not correct when using fractional
* value for HSE crystal.
* @param None
* @retval None
*/
void SystemCoreClockUpdate (void)
{
uint32_t tmp = 0, pllmult = 0, pllrefclk = 0, tempcfg = 0;
/* Get SYSCLK source -------------------------------------------------------*/
tmp = RCC->CFG & RCC_CFG_SYSCLKSTS;
switch (tmp)
{
case RCC_CFG_SYSCLKSTS_HSI: /* HSI used as system clock */
SystemCoreClock = HSI_VALUE;
break;
case RCC_CFG_SYSCLKSTS_HSE: /* HSE used as system clock */
SystemCoreClock = HSE_VALUE;
break;
case RCC_CFG_SYSCLKSTS_PLL: /* PLL used as system clock */
/* Get PLL clock source and multiplication factor ----------------------*/
pllrefclk = RCC->CFG & RCC_CFG_PLLRC;
tempcfg = RCC->CFG;
pllmult = RCC_GET_PLLMULT(tempcfg);
if (pllrefclk == RCC_PLLRefClk_HSI_Div2)
{
/* HSI oscillator clock divided by 2 selected as PLL clock entry */
SystemCoreClock = (HSI_VALUE >> 1) * pllmult;
}
else
{
/* HSE selected as PLL clock entry */
if ((RCC->CFG & RCC_CFG_PLLHSEPSC) != (uint32_t)RESET)
{
/* HSE oscillator clock divided by 2 */
SystemCoreClock = (HSE_VALUE >> 1) * pllmult;
}
else
{
SystemCoreClock = HSE_VALUE * pllmult;
}
}
break;
default:
SystemCoreClock = HSI_VALUE;
break;
}
/* Compute HCLK clock frequency ----------------*/
/* Get HCLK prescaler */
tmp = AHBPscTable[((RCC->CFG & RCC_CFG_AHBPSC) >> 4)];
/* HCLK clock frequency */
SystemCoreClock >>= tmp;
}
/**
* @brief Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers.
* @param None
* @retval None
*/
static void SetSysClock(void)
{
#ifdef SYSCLK_FREQ_HSE
SetSysClockToHSE();
#elif defined SYSCLK_FREQ_24MHz
SetSysClockTo24M();
#elif defined SYSCLK_FREQ_36MHz
SetSysClockTo36M();
#elif defined SYSCLK_FREQ_48MHz
SetSysClockTo48M();
#elif defined SYSCLK_FREQ_56MHz
SetSysClockTo56M();
#elif defined SYSCLK_FREQ_72MHz
SetSysClockTo72M();
#elif defined SYSCLK_FREQ_96MHz
SetSysClockTo96M();
#elif defined SYSCLK_FREQ_108MHz
SetSysClockTo108M();
#elif defined SYSCLK_FREQ_120MHz
SetSysClockTo120M();
#elif defined SYSCLK_FREQ_144MHz
SetSysClockTo144M();
#elif defined SYSCLK_FREQ_150MHz
SetSysClockTo150M();
#elif defined SYSCLK_FREQ_168MHz
SetSysClockTo168M();
#elif defined SYSCLK_FREQ_176MHz
SetSysClockTo176M();
#elif defined SYSCLK_FREQ_192MHz
SetSysClockTo192M();
#elif defined SYSCLK_FREQ_200MHz
SetSysClockTo200M();
#elif defined SYSCLK_FREQ_224MHz
SetSysClockTo224M();
#elif defined SYSCLK_FREQ_240MHz
SetSysClockTo240M();
#elif defined SYSCLK_FREQ_24MHz_HSI
SetSysClockTo24MHSI();
#elif defined SYSCLK_FREQ_36MHz_HSI
SetSysClockTo36MHSI();
#elif defined SYSCLK_FREQ_48MHz_HSI
SetSysClockTo48MHSI();
#elif defined SYSCLK_FREQ_56MHz_HSI
SetSysClockTo56MHSI();
#elif defined SYSCLK_FREQ_72MHz_HSI
SetSysClockTo72MHSI();
#elif defined SYSCLK_FREQ_96MHz_HSI
SetSysClockTo96MHSI();
#elif defined SYSCLK_FREQ_108MHz_HSI
SetSysClockTo108MHSI();
#elif defined SYSCLK_FREQ_120MHz_HSI
SetSysClockTo120MHSI();
#elif defined SYSCLK_FREQ_144MHz_HSI
SetSysClockTo144MHSI();
#elif defined SYSCLK_FREQ_150MHz_HSI
SetSysClockTo150MHSI();
#elif defined SYSCLK_FREQ_168MHz_HSI
SetSysClockTo168MHSI();
#elif defined SYSCLK_FREQ_176MHz_HSI
SetSysClockTo176MHSI();
#elif defined SYSCLK_FREQ_192MHz_HSI
SetSysClockTo192MHSI();
#elif defined SYSCLK_FREQ_200MHz_HSI
SetSysClockTo200MHSI();
#elif defined SYSCLK_FREQ_224MHz_HSI
SetSysClockTo224MHSI();
#elif defined SYSCLK_FREQ_240MHz_HSI
SetSysClockTo240MHSI();
#endif
/* If none of the define above is enabled, the HSI is used as System clock
source (default after reset) */
}
/**
* @brief Setup the external memory controller. Called in startup_at32f4xx.s
* before jump to __main
* @param None
* @retval None
*/
#ifdef DATA_IN_ExtSRAM
/**
* @brief Setup the external memory controller.
* Called in startup_at32f4xx_xx.s/.c before jump to main.
[at32] auto formatted
2021-03-14 15:15:52 +08:00
* This function configures the external SRAM mounted
[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver
2020-05-26 14:49:09 +08:00
* (AT32 High density devices). This SRAM will be used as program
* data memory (including heap and stack).
* @param None
* @retval None
*/
void SystemInit_ExtMemCtrl(void)
{
/* Enable XMC clock */
RCC->AHBEN = RCC_AHBEN_SRAMEN | RCC_AHBEN_FLASHEN | RCC_AHBEN_XMCEN;
/* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */
RCC->APB2EN = RCC_APB2EN_GPIODEN | RCC_APB2EN_GPIOEEN | RCC_APB2EN_GPIOFEN | RCC_APB2EN_GPIOGEN;
/* --------------- SRAM Data lines, NOE and NWE configuration ---------------*/
/*---------------- SRAM Address lines configuration -------------------------*/
/*---------------- NOE and NWE configuration --------------------------------*/
/*---------------- NE3 configuration ----------------------------------------*/
/*---------------- NBL0, NBL1 configuration ---------------------------------*/
GPIOD->CTRLL = 0x44BB44BB;
GPIOD->CTRLH = 0xBBBBBBBB;
GPIOE->CTRLL = 0xB44444BB;
GPIOE->CTRLH = 0xBBBBBBBB;
GPIOF->CTRLL = 0x44BBBBBB;
GPIOF->CTRLH = 0xBBBB4444;
GPIOG->CTRLL = 0x44BBBBBB;
GPIOG->CTRLH = 0x44444B44;
/*---------------- XMC Configuration ---------------------------------------*/
/*---------------- Enable XMC Bank1_SRAM Bank ------------------------------*/
XMC_Bank1->BK1CTRLR[4] = 0x00001011;
XMC_Bank1->BK1CTRLR[5] = 0x00000200;
}
#endif /* DATA_IN_ExtSRAM */
#ifndef SYSCLK_FREQ_HSI
#ifdef AT32F403xx
/**
* @brief Delay to wait for HSE stable.
* @note This function should be used before reading the HSESTBL flag.
* @param None
* @retval None
*/
static void WaitHseStbl(uint32_t delay)
{
uint32_t i;
for(i = 0; i < delay; i++)
;
}
#endif
#endif /* SYSCLK_FREQ_HSI */
#ifdef SYSCLK_FREQ_HSE
/**
* @brief Selects HSE as System clock source and configure HCLK, PCLK2
* and PCLK1 prescalers.
* @note This function should be used only after reset.
* @param None
* @retval None
*/
static void SetSysClockToHSE(void)
{
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
/* Enable HSE */
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSEEN);
/* Wait till HSE is ready and if Time out is reached exit */
do
{
HSEStatus = RCC->CTRL & RCC_CTRL_HSESTBL;
StartUpCounter++;
}
while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
[at32] auto formatted
2021-03-14 15:15:52 +08:00
#ifdef AT32F403xx
[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver
2020-05-26 14:49:09 +08:00
WaitHseStbl(HSE_STABLE_DELAY);
#endif
if ((RCC->CTRL & RCC_CTRL_HSESTBL) != RESET)
{
HSEStatus = (uint32_t)0x01;
}
else
{
HSEStatus = (uint32_t)0x00;
}
if (HSEStatus == (uint32_t)0x01)
{
#if defined (AT32F415xx)
/* Enable Prefetch Buffer */
FLASH->ACR |= FLASH_ACR_PRFTBE;
/* Flash 1 wait state */
FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
[at32] auto formatted
2021-03-14 15:15:52 +08:00
FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;
[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver
2020-05-26 14:49:09 +08:00
#endif
/* HCLK = SYSCLK */
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
/* PCLK2 = HCLK */
RCC->CFG &= 0xFFFFC7FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV1;
/* PCLK1 = HCLK */
RCC->CFG &= 0xFFFFF8FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV1;
/* Select HSE as system clock source */
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_HSE;
/* Wait till HSE is used as system clock source */
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != (uint32_t)0x04)
{
}
}
else
{
/* If HSE fails to start-up, the application will have wrong clock
configuration. User can add here some code to deal with this error */
}
}
#elif defined SYSCLK_FREQ_24MHz
/**
* @brief Sets System clock frequency to 24MHz and configure HCLK, PCLK2
* and PCLK1 prescalers.
* @note This function should be used only after reset.
* @param None
* @retval None
*/
static void SetSysClockTo24M(void)
{
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
/* Enable HSE */
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSEEN);
/* Wait till HSE is ready and if Time out is reached exit */
do
{
HSEStatus = RCC->CTRL & RCC_CTRL_HSESTBL;
StartUpCounter++;
}
while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
[at32] auto formatted
2021-03-14 15:15:52 +08:00
#ifdef AT32F403xx
[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver
2020-05-26 14:49:09 +08:00
WaitHseStbl(HSE_STABLE_DELAY);
#endif
if ((RCC->CTRL & RCC_CTRL_HSESTBL) != RESET)
{
HSEStatus = (uint32_t)0x01;
}
else
{
HSEStatus = (uint32_t)0x00;
}
if (HSEStatus == (uint32_t)0x01)
{
#if defined (AT32F415xx)
/* Enable Prefetch Buffer */
FLASH->ACR |= FLASH_ACR_PRFTBE;
/* Flash 1 wait state */
FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
[at32] auto formatted
2021-03-14 15:15:52 +08:00
FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;
[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver
2020-05-26 14:49:09 +08:00
#endif
/* HCLK = SYSCLK */
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
/* PCLK2 = HCLK */
RCC->CFG &= 0xFFFFC7FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV1;
/* PCLK1 = HCLK */
RCC->CFG &= 0xFFFFF8FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV1;
/* PLL configuration: = (HSE / 2) * 6 = 24 MHz */
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE | RCC_CFG_PLLHSEPSC_HSE_DIV2 | RCC_CFG_PLLMULT6);
/* Enable PLL */
RCC->CTRL |= RCC_CTRL_PLLEN;
/* Wait till PLL is ready */
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
{
}
/* Select PLL as system clock source */
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
{
}
#ifdef AT32F403xx
WaitHseStbl(PLL_STABLE_DELAY);
#endif
}
else
{
/* If HSE fails to start-up, the application will have wrong clock
configuration. User can add here some code to deal with this error */
}
}
#elif defined SYSCLK_FREQ_36MHz
/**
* @brief Sets System clock frequency to 36MHz and configure HCLK, PCLK2
* and PCLK1 prescalers.
* @note This function should be used only after reset.
* @param None
* @retval None
*/
static void SetSysClockTo36M(void)
{
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
/* Enable HSE */
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSEEN);
/* Wait till HSE is ready and if Time out is reached exit */
do
{
HSEStatus = RCC->CTRL & RCC_CTRL_HSESTBL;
StartUpCounter++;
}
while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
[at32] auto formatted
2021-03-14 15:15:52 +08:00
#ifdef AT32F403xx
[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver
2020-05-26 14:49:09 +08:00
WaitHseStbl(HSE_STABLE_DELAY);
#endif
if ((RCC->CTRL & RCC_CTRL_HSESTBL) != RESET)
{
HSEStatus = (uint32_t)0x01;
}
else
{
HSEStatus = (uint32_t)0x00;
}
if (HSEStatus == (uint32_t)0x01)
{
#if defined (AT32F415xx)
/* Enable Prefetch Buffer */
FLASH->ACR |= FLASH_ACR_PRFTBE;
/* Flash 1 wait state */
FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
[at32] auto formatted
2021-03-14 15:15:52 +08:00
FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;
[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver
2020-05-26 14:49:09 +08:00
#endif
/* HCLK = SYSCLK */
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
/* PCLK2 = HCLK */
RCC->CFG &= 0xFFFFC7FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV1;
/* PCLK1 = HCLK */
RCC->CFG &= 0xFFFFF8FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV1;
/* PLL configuration: PLLCLK = (HSE / 2) * 9 = 36 MHz */
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE | RCC_CFG_PLLHSEPSC_HSE_DIV2 | RCC_CFG_PLLMULT9);
/* Enable PLL */
RCC->CTRL |= RCC_CTRL_PLLEN;
/* Wait till PLL is ready */
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
{
}
/* Select PLL as system clock source */
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
{
}
#ifdef AT32F403xx
WaitHseStbl(PLL_STABLE_DELAY);
#endif
}
else
{
/* If HSE fails to start-up, the application will have wrong clock
configuration. User can add here some code to deal with this error */
}
}
#elif defined SYSCLK_FREQ_48MHz
/**
* @brief Sets System clock frequency to 48MHz and configure HCLK, PCLK2
* and PCLK1 prescalers.
* @note This function should be used only after reset.
* @param None
* @retval None
*/
static void SetSysClockTo48M(void)
{
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
/* Enable HSE */
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSEEN);
/* Wait till HSE is ready and if Time out is reached exit */
do
{
HSEStatus = RCC->CTRL & RCC_CTRL_HSESTBL;
StartUpCounter++;
}
while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
[at32] auto formatted
2021-03-14 15:15:52 +08:00
#ifdef AT32F403xx
[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver
2020-05-26 14:49:09 +08:00
WaitHseStbl(HSE_STABLE_DELAY);
#endif
if ((RCC->CTRL & RCC_CTRL_HSESTBL) != RESET)
{
HSEStatus = (uint32_t)0x01;
}
else
{
HSEStatus = (uint32_t)0x00;
}
if (HSEStatus == (uint32_t)0x01)
{
#if defined (AT32F415xx)
/* Enable Prefetch Buffer */
FLASH->ACR |= FLASH_ACR_PRFTBE;
/* Flash 1 wait state */
FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
[at32] auto formatted
2021-03-14 15:15:52 +08:00
FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;
[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver
2020-05-26 14:49:09 +08:00
#endif
/* HCLK = SYSCLK */
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
/* PCLK2 = HCLK */
RCC->CFG &= 0xFFFFC7FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV1;
/* PCLK1 = HCLK/2 */
RCC->CFG &= 0xFFFFF8FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
/* PLL configuration: PLLCLK = HSE * 6 = 48 MHz */
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE | RCC_CFG_PLLMULT6);
/* Enable PLL */
RCC->CTRL |= RCC_CTRL_PLLEN;
/* Wait till PLL is ready */
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
{
}
/* Select PLL as system clock source */
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
{
}
#ifdef AT32F403xx
WaitHseStbl(PLL_STABLE_DELAY);
#endif
}
else
{
/* If HSE fails to start-up, the application will have wrong clock
configuration. User can add here some code to deal with this error */
}
}
#elif defined SYSCLK_FREQ_56MHz
/**
* @brief Sets System clock frequency to 56MHz and configure HCLK, PCLK2
* and PCLK1 prescalers.
* @note This function should be used only after reset.
* @param None
* @retval None
*/
static void SetSysClockTo56M(void)
{
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
/* Enable HSE */
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSEEN);
/* Wait till HSE is ready and if Time out is reached exit */
do
{
HSEStatus = RCC->CTRL & RCC_CTRL_HSESTBL;
StartUpCounter++;
}
while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
[at32] auto formatted
2021-03-14 15:15:52 +08:00
#ifdef AT32F403xx
[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver
2020-05-26 14:49:09 +08:00
WaitHseStbl(HSE_STABLE_DELAY);
#endif
if ((RCC->CTRL & RCC_CTRL_HSESTBL) != RESET)
{
HSEStatus = (uint32_t)0x01;
}
else
{
HSEStatus = (uint32_t)0x00;
}
if (HSEStatus == (uint32_t)0x01)
{
#if defined (AT32F415xx)
/* Enable Prefetch Buffer */
FLASH->ACR |= FLASH_ACR_PRFTBE;
/* Flash 1 wait state */
FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
[at32] auto formatted
2021-03-14 15:15:52 +08:00
FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;
[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver
2020-05-26 14:49:09 +08:00
#endif
/* HCLK = SYSCLK */
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
/* PCLK2 = HCLK */
RCC->CFG &= 0xFFFFC7FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV1;
/* PCLK1 = HCLK/2 */
RCC->CFG &= 0xFFFFF8FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
/* PLL configuration: PLLCLK = HSE * 7 = 56 MHz */
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE | RCC_CFG_PLLMULT7);
/* Enable PLL */
RCC->CTRL |= RCC_CTRL_PLLEN;
/* Wait till PLL is ready */
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
{
}
/* Select PLL as system clock source */
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
{
}
#ifdef AT32F403xx
WaitHseStbl(PLL_STABLE_DELAY);
#endif
}
else
{
/* If HSE fails to start-up, the application will have wrong clock
configuration. User can add here some code to deal with this error */
}
}
#elif defined SYSCLK_FREQ_72MHz
/**
* @brief Sets System clock frequency to 72MHz and configure HCLK, PCLK2
* and PCLK1 prescalers.
* @note This function should be used only after reset.
* @param None
* @retval None
*/
static void SetSysClockTo72M(void)
{
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
/* Enable HSE */
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSEEN);
/* Wait till HSE is ready and if Time out is reached exit */
do
{
HSEStatus = RCC->CTRL & RCC_CTRL_HSESTBL;
StartUpCounter++;
}
while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
[at32] auto formatted
2021-03-14 15:15:52 +08:00
#ifdef AT32F403xx
[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver
2020-05-26 14:49:09 +08:00
WaitHseStbl(HSE_STABLE_DELAY);
#endif
if ((RCC->CTRL & RCC_CTRL_HSESTBL) != RESET)
{
HSEStatus = (uint32_t)0x01;
}
else
{
HSEStatus = (uint32_t)0x00;
}
if (HSEStatus == (uint32_t)0x01)
{
#if defined (AT32F415xx)
/* Enable Prefetch Buffer */
FLASH->ACR |= FLASH_ACR_PRFTBE;
/* Flash 1 wait state */
FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
[at32] auto formatted
2021-03-14 15:15:52 +08:00
FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2;
[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver
2020-05-26 14:49:09 +08:00
#endif
/* HCLK = SYSCLK */
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
/* PCLK2 = HCLK */
RCC->CFG &= 0xFFFFC7FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV1;
/* PCLK1 = HCLK/2 */
RCC->CFG &= 0xFFFFF8FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
/* PLL configuration: PLLCLK = HSE * 9 = 72 MHz */
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE | RCC_CFG_PLLMULT9);
/* Enable PLL */
RCC->CTRL |= RCC_CTRL_PLLEN;
/* Wait till PLL is ready */
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
{
}
/* Select PLL as system clock source */
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
{
}
#ifdef AT32F403xx
WaitHseStbl(PLL_STABLE_DELAY);
#endif
}
else
{
/* If HSE fails to start-up, the application will have wrong clock
configuration. User can add here some code to deal with this error */
}
}
#elif defined SYSCLK_FREQ_96MHz
/**
* @brief Sets System clock frequency to 96MHz and configure HCLK, PCLK2
* and PCLK1 prescalers.
* @note This function should be used only after reset.
* @param None
* @retval None
*/
static void SetSysClockTo96M(void)
{
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
/* Enable HSE */
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSEEN);
/* Wait till HSE is ready and if Time out is reached exit */
do
{
HSEStatus = RCC->CTRL & RCC_CTRL_HSESTBL;
StartUpCounter++;
}
while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
[at32] auto formatted
2021-03-14 15:15:52 +08:00
#ifdef AT32F403xx
[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver
2020-05-26 14:49:09 +08:00
WaitHseStbl(HSE_STABLE_DELAY);
#endif
if ((RCC->CTRL & RCC_CTRL_HSESTBL) != RESET)
{
HSEStatus = (uint32_t)0x01;
}
else
{
HSEStatus = (uint32_t)0x00;
}
if (HSEStatus == (uint32_t)0x01)
{
#if defined (AT32F415xx)
/* Enable Prefetch Buffer */
FLASH->ACR |= FLASH_ACR_PRFTBE;
/* Flash 1 wait state */
FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
[at32] auto formatted
2021-03-14 15:15:52 +08:00
FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2;
[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver
2020-05-26 14:49:09 +08:00
#endif
/* HCLK = SYSCLK */
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
/* PCLK2 = HCLK/2 */
RCC->CFG &= 0xFFFFC7FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
/* PCLK1 = HCLK/2 */
RCC->CFG &= 0xFFFFF8FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
/* PLL configuration: PLLCLK = HSE * 12 = 96 MHz */
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
#if defined (AT32F415xx)
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE | RCC_CFG_PLLMULT12);
#else
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE | RCC_CFG_PLLMULT12 | RCC_CFG_PLLRANGE_GT72MHZ);
#endif
/* Enable PLL */
RCC->CTRL |= RCC_CTRL_PLLEN;
/* Wait till PLL is ready */
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
{
}
/* Select PLL as system clock source */
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
{
}
#ifdef AT32F403xx
WaitHseStbl(PLL_STABLE_DELAY);
#endif
}
else
{
/* If HSE fails to start-up, the application will have wrong clock
configuration. User can add here some code to deal with this error */
}
}
#elif defined SYSCLK_FREQ_108MHz
/**
* @brief Sets System clock frequency to 108MHz and configure HCLK, PCLK2
* and PCLK1 prescalers.
* @note This function should be used only after reset.
* @param None
* @retval None
*/
static void SetSysClockTo108M(void)
{
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
/* Enable HSE */
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSEEN);
/* Wait till HSE is ready and if Time out is reached exit */
do
{
HSEStatus = RCC->CTRL & RCC_CTRL_HSESTBL;
StartUpCounter++;
}
while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
[at32] auto formatted
2021-03-14 15:15:52 +08:00
#ifdef AT32F403xx
[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver
2020-05-26 14:49:09 +08:00
WaitHseStbl(HSE_STABLE_DELAY);
#endif
if ((RCC->CTRL & RCC_CTRL_HSESTBL) != RESET)
{
HSEStatus = (uint32_t)0x01;
}
else
{
HSEStatus = (uint32_t)0x00;
}
if (HSEStatus == (uint32_t)0x01)
{
#if defined (AT32F415xx)
/* Enable Prefetch Buffer */
FLASH->ACR |= FLASH_ACR_PRFTBE;
/* Flash 1 wait state */
FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
[at32] auto formatted
2021-03-14 15:15:52 +08:00
FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_3;
[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver
2020-05-26 14:49:09 +08:00
#endif
/* HCLK = SYSCLK */
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
/* PCLK2 = HCLK/2 */
RCC->CFG &= 0xFFFFC7FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
/* PCLK1 = HCLK/2 */
RCC->CFG &= 0xFFFFF8FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
/* PLL configuration: PLLCLK = (HSE/2) * 27 = 108 MHz */
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
#if defined (AT32F415xx)
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE | RCC_CFG_PLLHSEPSC_HSE_DIV2 | RCC_CFG_PLLMULT27);
#else
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE | RCC_CFG_PLLHSEPSC_HSE_DIV2 | RCC_CFG_PLLMULT27 \
| RCC_CFG_PLLRANGE_GT72MHZ);
#endif
/* Enable PLL */
RCC->CTRL |= RCC_CTRL_PLLEN;
/* Wait till PLL is ready */
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
{
}
/* Select PLL as system clock source */
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
{
}
#ifdef AT32F403xx
WaitHseStbl(PLL_STABLE_DELAY);
#endif
}
else
{
/* If HSE fails to start-up, the application will have wrong clock
configuration. User can add here some code to deal with this error */
}
}
#elif defined SYSCLK_FREQ_120MHz
/**
* @brief Sets System clock frequency to 120MHz and configure HCLK, PCLK2
* and PCLK1 prescalers.
* @note This function should be used only after reset.
* @param None
* @retval None
*/
static void SetSysClockTo120M(void)
{
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
/* Enable HSE */
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSEEN);
/* Wait till HSE is ready and if Time out is reached exit */
do
{
HSEStatus = RCC->CTRL & RCC_CTRL_HSESTBL;
StartUpCounter++;
}
while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
[at32] auto formatted
2021-03-14 15:15:52 +08:00
#ifdef AT32F403xx
[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver
2020-05-26 14:49:09 +08:00
WaitHseStbl(HSE_STABLE_DELAY);
#endif
if ((RCC->CTRL & RCC_CTRL_HSESTBL) != RESET)
{
HSEStatus = (uint32_t)0x01;
}
else
{
HSEStatus = (uint32_t)0x00;
}
if (HSEStatus == (uint32_t)0x01)
{
#if defined (AT32F415xx)
/* Enable Prefetch Buffer */
FLASH->ACR |= FLASH_ACR_PRFTBE;
/* Flash 1 wait state */
FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
[at32] auto formatted
2021-03-14 15:15:52 +08:00
FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_3;
[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver
2020-05-26 14:49:09 +08:00
#endif
/* HCLK = SYSCLK */
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
/* PCLK2 = HCLK/2 */
RCC->CFG &= 0xFFFFC7FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
/* PCLK1 = HCLK/2 */
RCC->CFG &= 0xFFFFF8FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
/* PLL configuration: PLLCLK = HSE * 15 = 120 MHz */
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
#if defined (AT32F415xx)
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE | RCC_CFG_PLLMULT15);
#else
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE | RCC_CFG_PLLMULT15 | RCC_CFG_PLLRANGE_GT72MHZ);
#endif
/* Enable PLL */
RCC->CTRL |= RCC_CTRL_PLLEN;
/* Wait till PLL is ready */
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
{
}
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
defined (AT32F407xx) || defined (AT32F415xx)
RCC_StepModeCmd(ENABLE);
#endif
/* Select PLL as system clock source */
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
{
}
#ifdef AT32F403xx
WaitHseStbl(PLL_STABLE_DELAY);
#endif
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
defined (AT32F407xx) || defined (AT32F415xx)
RCC_StepModeCmd(DISABLE);
#endif
}
else
{
/* If HSE fails to start-up, the application will have wrong clock
configuration. User can add here some code to deal with this error */
}
}
#elif defined SYSCLK_FREQ_144MHz
/**
* @brief Sets System clock frequency to 144MHz and configure HCLK, PCLK2
* and PCLK1 prescalers.
* @note This function should be used only after reset.
* @param None
* @retval None
*/
static void SetSysClockTo144M(void)
{
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
/* Enable HSE */
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSEEN);
/* Wait till HSE is ready and if Time out is reached exit */
do
{
HSEStatus = RCC->CTRL & RCC_CTRL_HSESTBL;
StartUpCounter++;
}
while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
[at32] auto formatted
2021-03-14 15:15:52 +08:00
#ifdef AT32F403xx
[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver
2020-05-26 14:49:09 +08:00
WaitHseStbl(HSE_STABLE_DELAY);
#endif
if ((RCC->CTRL & RCC_CTRL_HSESTBL) != RESET)
{
HSEStatus = (uint32_t)0x01;
}
else
{
HSEStatus = (uint32_t)0x00;
}
if (HSEStatus == (uint32_t)0x01)
{
#if defined (AT32F415xx)
/* Enable Prefetch Buffer */
FLASH->ACR |= FLASH_ACR_PRFTBE;
/* Flash 1 wait state */
FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
[at32] auto formatted
2021-03-14 15:15:52 +08:00
FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_4;
[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver
2020-05-26 14:49:09 +08:00
#endif
/* HCLK = SYSCLK */
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
/* PCLK2 = HCLK/2 */
RCC->CFG &= 0xFFFFC7FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
/* PCLK1 = HCLK/2 */
RCC->CFG &= 0xFFFFF8FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
/* PLL configuration: PLLCLK = HSE * 18 = 144 MHz */
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
[at32] auto formatted
2021-03-14 15:15:52 +08:00
[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver
2020-05-26 14:49:09 +08:00
#if defined (AT32F415xx)
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE | RCC_CFG_PLLMULT18);
#else
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE | RCC_CFG_PLLMULT18 | RCC_CFG_PLLRANGE_GT72MHZ);
#endif
/* Enable PLL */
RCC->CTRL |= RCC_CTRL_PLLEN;
/* Wait till PLL is ready */
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
{
}
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
defined (AT32F407xx) || defined (AT32F415xx)
RCC_StepModeCmd(ENABLE);
#endif
/* Select PLL as system clock source */
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
{
}
#ifdef AT32F403xx
WaitHseStbl(PLL_STABLE_DELAY);
#endif
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
defined (AT32F407xx) || defined (AT32F415xx)
RCC_StepModeCmd(DISABLE);
#endif
}
else
{
/* If HSE fails to start-up, the application will have wrong clock
configuration. User can add here some code to deal with this error */
}
}
#elif defined SYSCLK_FREQ_150MHz
/**
* @brief Sets System clock frequency to 150MHz and configure HCLK, PCLK2
* and PCLK1 prescalers.
* @note This function should be used only after reset.
* @param None
* @retval None
*/
static void SetSysClockTo150M(void)
{
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
/* Enable HSE */
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSEEN);
/* Wait till HSE is ready and if Time out is reached exit */
do
{
HSEStatus = RCC->CTRL & RCC_CTRL_HSESTBL;
StartUpCounter++;
}
while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
[at32] auto formatted
2021-03-14 15:15:52 +08:00
#ifdef AT32F403xx
[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver
2020-05-26 14:49:09 +08:00
WaitHseStbl(HSE_STABLE_DELAY);
#endif
if ((RCC->CTRL & RCC_CTRL_HSESTBL) != RESET)
{
HSEStatus = (uint32_t)0x01;
}
else
{
HSEStatus = (uint32_t)0x00;
}
if (HSEStatus == (uint32_t)0x01)
{
#if defined (AT32F415xx)
/* Enable Prefetch Buffer */
FLASH->ACR |= FLASH_ACR_PRFTBE;
/* Flash 1 wait state */
FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
[at32] auto formatted
2021-03-14 15:15:52 +08:00
FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_4;
[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver
2020-05-26 14:49:09 +08:00
#endif
/* HCLK = SYSCLK */
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
/* PCLK2 = HCLK/2 */
RCC->CFG &= 0xFFFFC7FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
/* PCLK1 = HCLK/2 */
RCC->CFG &= 0xFFFFF8FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
/* PLL configuration: PLLCLK = (HSE * 75) / (1 * 4) = 150 MHz */
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE);
RCC_PLLconfig2(PLL_FREF_8M, 75, 1, PLL_FR_4);
/* Enable PLL */
RCC->CTRL |= RCC_CTRL_PLLEN;
/* Wait till PLL is ready */
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
{
}
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
defined (AT32F407xx) || defined (AT32F415xx)
RCC_StepModeCmd(ENABLE);
#endif
/* Select PLL as system clock source */
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
{
}
#ifdef AT32F403xx
WaitHseStbl(PLL_STABLE_DELAY);
#endif
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
defined (AT32F407xx) || defined (AT32F415xx)
RCC_StepModeCmd(DISABLE);
#endif
}
else
{
/* If HSE fails to start-up, the application will have wrong clock
configuration. User can add here some code to deal with this error */
}
}
#elif defined SYSCLK_FREQ_168MHz
/**
* @brief Sets System clock frequency to 168MHz and configure HCLK, PCLK2
* and PCLK1 prescalers.
* @note This function should be used only after reset.
* @param None
* @retval None
*/
static void SetSysClockTo168M(void)
{
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
/* Enable HSE */
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSEEN);
/* Wait till HSE is ready and if Time out is reached exit */
do
{
HSEStatus = RCC->CTRL & RCC_CTRL_HSESTBL;
StartUpCounter++;
}
while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
[at32] auto formatted
2021-03-14 15:15:52 +08:00
#ifdef AT32F403xx
[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver
2020-05-26 14:49:09 +08:00
WaitHseStbl(HSE_STABLE_DELAY);
#endif
if ((RCC->CTRL & RCC_CTRL_HSESTBL) != RESET)
{
HSEStatus = (uint32_t)0x01;
}
else
{
HSEStatus = (uint32_t)0x00;
}
if (HSEStatus == (uint32_t)0x01)
{
/* HCLK = SYSCLK */
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
/* PCLK2 = HCLK/2 */
RCC->CFG &= 0xFFFFC7FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
/* PCLK1 = HCLK/2 */
RCC->CFG &= 0xFFFFF8FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
/* PLL configuration: PLLCLK = HSE * 21 = 168 MHz */
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE | RCC_CFG_PLLMULT21 | RCC_CFG_PLLRANGE_GT72MHZ);
/* Enable PLL */
RCC->CTRL |= RCC_CTRL_PLLEN;
/* Wait till PLL is ready */
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
{
}
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
defined (AT32F407xx)
RCC_StepModeCmd(ENABLE);
#endif
/* Select PLL as system clock source */
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
{
}
#ifdef AT32F403xx
WaitHseStbl(PLL_STABLE_DELAY);
#endif
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
defined (AT32F407xx)
RCC_StepModeCmd(DISABLE);
#endif
}
else
{
/* If HSE fails to start-up, the application will have wrong clock
configuration. User can add here some code to deal with this error */
}
}
#elif defined SYSCLK_FREQ_176MHz
/**
* @brief Sets System clock frequency to 176MHz and configure HCLK, PCLK2
* and PCLK1 prescalers.
* @note This function should be used only after reset.
* @param None
* @retval None
*/
static void SetSysClockTo176M(void)
{
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
/* Enable HSE */
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSEEN);
/* Wait till HSE is ready and if Time out is reached exit */
do
{
HSEStatus = RCC->CTRL & RCC_CTRL_HSESTBL;
StartUpCounter++;
}
while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
[at32] auto formatted
2021-03-14 15:15:52 +08:00
#ifdef AT32F403xx
[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver
2020-05-26 14:49:09 +08:00
WaitHseStbl(HSE_STABLE_DELAY);
#endif
if ((RCC->CTRL & RCC_CTRL_HSESTBL) != RESET)
{
HSEStatus = (uint32_t)0x01;
}
else
{
HSEStatus = (uint32_t)0x00;
}
if (HSEStatus == (uint32_t)0x01)
{
/* HCLK = SYSCLK */
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
/* PCLK2 = HCLK/2 */
RCC->CFG &= 0xFFFFC7FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
/* PCLK1 = HCLK/2 */
RCC->CFG &= 0xFFFFF8FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
/* PLL configuration: PLLCLK = HSE * 22 = 176 MHz */
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE | RCC_CFG_PLLMULT22 | RCC_CFG_PLLRANGE_GT72MHZ);
/* Enable PLL */
RCC->CTRL |= RCC_CTRL_PLLEN;
/* Wait till PLL is ready */
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
{
}
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
defined (AT32F407xx)
RCC_StepModeCmd(ENABLE);
#endif
/* Select PLL as system clock source */
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
{
}
#ifdef AT32F403xx
WaitHseStbl(PLL_STABLE_DELAY);
#endif
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
defined (AT32F407xx)
RCC_StepModeCmd(DISABLE);
#endif
}
else
{
/* If HSE fails to start-up, the application will have wrong clock
configuration. User can add here some code to deal with this error */
}
}
#elif defined SYSCLK_FREQ_192MHz
/**
* @brief Sets System clock frequency to 192MHz and configure HCLK, PCLK2
* and PCLK1 prescalers.
* @note This function should be used only after reset.
* @param None
* @retval None
*/
static void SetSysClockTo192M(void)
{
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
/* Enable HSE */
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSEEN);
/* Wait till HSE is ready and if Time out is reached exit */
do
{
HSEStatus = RCC->CTRL & RCC_CTRL_HSESTBL;
StartUpCounter++;
}
while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
[at32] auto formatted
2021-03-14 15:15:52 +08:00
#ifdef AT32F403xx
[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver
2020-05-26 14:49:09 +08:00
WaitHseStbl(HSE_STABLE_DELAY);
#endif
if ((RCC->CTRL & RCC_CTRL_HSESTBL) != RESET)
{
HSEStatus = (uint32_t)0x01;
}
else
{
HSEStatus = (uint32_t)0x00;
}
if (HSEStatus == (uint32_t)0x01)
{
/* HCLK = SYSCLK */
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
/* PCLK2 = HCLK/2 */
RCC->CFG &= 0xFFFFC7FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
/* PCLK1 = HCLK/2 */
RCC->CFG &= 0xFFFFF8FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
/* PLL configuration: PLLCLK = HSE * 24 = 192 MHz */
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE | RCC_CFG_PLLMULT24 | RCC_CFG_PLLRANGE_GT72MHZ);
/* Enable PLL */
RCC->CTRL |= RCC_CTRL_PLLEN;
/* Wait till PLL is ready */
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
{
}
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
defined (AT32F407xx)
RCC_StepModeCmd(ENABLE);
#endif
/* Select PLL as system clock source */
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
{
}
#ifdef AT32F403xx
WaitHseStbl(PLL_STABLE_DELAY);
#endif
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
defined (AT32F407xx)
RCC_StepModeCmd(DISABLE);
#endif
}
else
{
/* If HSE fails to start-up, the application will have wrong clock
configuration. User can add here some code to deal with this error */
}
}
#elif defined SYSCLK_FREQ_200MHz
/**
* @brief Sets System clock frequency to 200MHz and configure HCLK, PCLK2
* and PCLK1 prescalers.
* @note This function should be used only after reset.
* @param None
* @retval None
*/
static void SetSysClockTo200M(void)
{
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
/* Enable HSE */
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSEEN);
/* Wait till HSE is ready and if Time out is reached exit */
do
{
HSEStatus = RCC->CTRL & RCC_CTRL_HSESTBL;
StartUpCounter++;
}
while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
[at32] auto formatted
2021-03-14 15:15:52 +08:00
#ifdef AT32F403xx
[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver
2020-05-26 14:49:09 +08:00
WaitHseStbl(HSE_STABLE_DELAY);
#endif
if ((RCC->CTRL & RCC_CTRL_HSESTBL) != RESET)
{
HSEStatus = (uint32_t)0x01;
}
else
{
HSEStatus = (uint32_t)0x00;
}
if (HSEStatus == (uint32_t)0x01)
{
/* HCLK = SYSCLK */
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
/* PCLK2 = HCLK/2 */
RCC->CFG &= 0xFFFFC7FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
/* PCLK1 = HCLK/2 */
RCC->CFG &= 0xFFFFF8FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
/* PLL configuration: PLLCLK = HSE * 25 = 200 MHz */
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE | RCC_CFG_PLLMULT25 | RCC_CFG_PLLRANGE_GT72MHZ);
/* Enable PLL */
RCC->CTRL |= RCC_CTRL_PLLEN;
/* Wait till PLL is ready */
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
{
}
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
defined (AT32F407xx)
RCC_StepModeCmd(ENABLE);
#endif
/* Select PLL as system clock source */
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
{
}
#ifdef AT32F403xx
WaitHseStbl(PLL_STABLE_DELAY);
#endif
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
defined (AT32F407xx)
RCC_StepModeCmd(DISABLE);
#endif
}
else
{
/* If HSE fails to start-up, the application will have wrong clock
configuration. User can add here some code to deal with this error */
}
}
#elif defined SYSCLK_FREQ_224MHz
/**
* @brief Sets System clock frequency to 224MHz and configure HCLK, PCLK2
* and PCLK1 prescalers.
* @note This function should be used only after reset.
* @param None
* @retval None
*/
static void SetSysClockTo224M(void)
{
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
/* Enable HSE */
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSEEN);
/* Wait till HSE is ready and if Time out is reached exit */
do
{
HSEStatus = RCC->CTRL & RCC_CTRL_HSESTBL;
StartUpCounter++;
}
while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
[at32] auto formatted
2021-03-14 15:15:52 +08:00
#ifdef AT32F403xx
[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver
2020-05-26 14:49:09 +08:00
WaitHseStbl(HSE_STABLE_DELAY);
#endif
if ((RCC->CTRL & RCC_CTRL_HSESTBL) != RESET)
{
HSEStatus = (uint32_t)0x01;
}
else
{
HSEStatus = (uint32_t)0x00;
}
if (HSEStatus == (uint32_t)0x01)
{
/* HCLK = SYSCLK */
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
/* PCLK2 = HCLK/2 */
RCC->CFG &= 0xFFFFC7FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
/* PCLK1 = HCLK/2 */
RCC->CFG &= 0xFFFFF8FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
/* PLL configuration: PLLCLK = HSE * 28 = 224 MHz */
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE | RCC_CFG_PLLMULT28 | RCC_CFG_PLLRANGE_GT72MHZ);
/* Enable PLL */
RCC->CTRL |= RCC_CTRL_PLLEN;
/* Wait till PLL is ready */
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
{
}
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
defined (AT32F407xx)
RCC_StepModeCmd(ENABLE);
#endif
/* Select PLL as system clock source */
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
{
}
#ifdef AT32F403xx
WaitHseStbl(PLL_STABLE_DELAY);
#endif
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
defined (AT32F407xx)
RCC_StepModeCmd(DISABLE);
#endif
}
else
{
/* If HSE fails to start-up, the application will have wrong clock
configuration. User can add here some code to deal with this error */
}
}
#elif defined SYSCLK_FREQ_240MHz
/**
* @brief Sets System clock frequency to 240MHz and configure HCLK, PCLK2
* and PCLK1 prescalers.
* @note This function should be used only after reset.
* @param None
* @retval None
*/
static void SetSysClockTo240M(void)
{
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
/* Enable HSE */
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSEEN);
/* Wait till HSE is ready and if Time out is reached exit */
do
{
HSEStatus = RCC->CTRL & RCC_CTRL_HSESTBL;
StartUpCounter++;
}
while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
[at32] auto formatted
2021-03-14 15:15:52 +08:00
#ifdef AT32F403xx
[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver
2020-05-26 14:49:09 +08:00
WaitHseStbl(HSE_STABLE_DELAY);
#endif
if ((RCC->CTRL & RCC_CTRL_HSESTBL) != RESET)
{
HSEStatus = (uint32_t)0x01;
}
else
{
HSEStatus = (uint32_t)0x00;
}
if (HSEStatus == (uint32_t)0x01)
{
/* HCLK = SYSCLK */
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
/* PCLK2 = HCLK/2 */
RCC->CFG &= 0xFFFFC7FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
/* PCLK1 = HCLK/2 */
RCC->CFG &= 0xFFFFF8FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
/* PLL configuration: PLLCLK = HSE * 30 = 240 MHz */
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE | RCC_CFG_PLLMULT30 | RCC_CFG_PLLRANGE_GT72MHZ);
/* Enable PLL */
RCC->CTRL |= RCC_CTRL_PLLEN;
/* Wait till PLL is ready */
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
{
}
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
defined (AT32F407xx)
RCC_StepModeCmd(ENABLE);
#endif
/* Select PLL as system clock source */
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
{
}
#ifdef AT32F403xx
WaitHseStbl(PLL_STABLE_DELAY);
#endif
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
defined (AT32F407xx)
RCC_StepModeCmd(DISABLE);
#endif
}
else
{
/* If HSE fails to start-up, the application will have wrong clock
configuration. User can add here some code to deal with this error */
}
}
#elif defined SYSCLK_FREQ_24MHz_HSI
/**
* @brief Sets System clock frequency to 24MHz from HSI and configure HCLK, PCLK2
* and PCLK1 prescalers.
* @note This function should be used only after reset.
* @param None
* @retval None
*/
static void SetSysClockTo24MHSI(void)
{
__IO uint32_t StartUpCounter = 0, HSIStatus = 0;
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
/* Enable HSI */
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSIEN);
/* Wait till HSI is ready and if Time out is reached exit */
do
{
HSIStatus = RCC->CTRL & RCC_CTRL_HSISTBL;
StartUpCounter++;
}
while((HSIStatus == 0) && (StartUpCounter != 0xFFFF));
if ((RCC->CTRL & RCC_CTRL_HSISTBL) != RESET)
{
HSIStatus = (uint32_t)0x01;
}
else
{
HSIStatus = (uint32_t)0x00;
}
if (HSIStatus == (uint32_t)0x01)
{
#if defined (AT32F415xx)
/* Enable Prefetch Buffer */
FLASH->ACR |= FLASH_ACR_PRFTBE;
/* Flash 1 wait state */
FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
[at32] auto formatted
2021-03-14 15:15:52 +08:00
FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;
[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver
2020-05-26 14:49:09 +08:00
#endif
/* HCLK = SYSCLK */
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
/* PCLK2 = HCLK */
RCC->CFG &= 0xFFFFC7FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV1;
/* PCLK1 = HCLK */
RCC->CFG &= 0xFFFFF8FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV1;
/* PLL configuration: PLLCLK = (HSI/2) * 6 = 24 MHz */
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSI_DIV2 | RCC_CFG_PLLMULT6);
/* Enable PLL */
RCC->CTRL |= RCC_CTRL_PLLEN;
/* Wait till PLL is ready */
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
{
}
/* Select PLL as system clock source */
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
{
}
#ifdef AT32F403xx
WaitHseStbl(PLL_STABLE_DELAY);
#endif
}
}
#elif defined SYSCLK_FREQ_36MHz_HSI
/**
* @brief Sets System clock frequency to 36MHz from HSI and configure HCLK, PCLK2
* and PCLK1 prescalers.
* @note This function should be used only after reset.
* @param None
* @retval None
*/
static void SetSysClockTo36MHSI(void)
{
__IO uint32_t StartUpCounter = 0, HSIStatus = 0;
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
/* Enable HSI */
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSIEN);
/* Wait till HSI is ready and if Time out is reached exit */
do
{
HSIStatus = RCC->CTRL & RCC_CTRL_HSISTBL;
StartUpCounter++;
}
while((HSIStatus == 0) && (StartUpCounter != 0xFFFF));
if ((RCC->CTRL & RCC_CTRL_HSISTBL) != RESET)
{
HSIStatus = (uint32_t)0x01;
}
else
{
HSIStatus = (uint32_t)0x00;
}
if (HSIStatus == (uint32_t)0x01)
{
#if defined (AT32F415xx)
/* Enable Prefetch Buffer */
FLASH->ACR |= FLASH_ACR_PRFTBE;
/* Flash 1 wait state */
FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
[at32] auto formatted
2021-03-14 15:15:52 +08:00
FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;
[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver
2020-05-26 14:49:09 +08:00
#endif
/* HCLK = SYSCLK */
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
/* PCLK2 = HCLK */
RCC->CFG &= 0xFFFFC7FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV1;
/* PCLK1 = HCLK */
RCC->CFG &= 0xFFFFF8FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV1;
/* PLL configuration: PLLCLK = (HSI/2) * 9 = 36 MHz */
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSI_DIV2 | RCC_CFG_PLLMULT9);
/* Enable PLL */
RCC->CTRL |= RCC_CTRL_PLLEN;
/* Wait till PLL is ready */
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
{
}
/* Select PLL as system clock source */
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
{
}
#ifdef AT32F403xx
WaitHseStbl(PLL_STABLE_DELAY);
#endif
}
}
#elif defined SYSCLK_FREQ_48MHz_HSI
/**
* @brief Sets System clock frequency to 48MHz from HSI and configure HCLK, PCLK2
* and PCLK1 prescalers.
* @note This function should be used only after reset.
* @param None
* @retval None
*/
static void SetSysClockTo48MHSI(void)
{
__IO uint32_t StartUpCounter = 0, HSIStatus = 0;
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
/* Enable HSI */
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSIEN);
/* Wait till HSI is ready and if Time out is reached exit */
do
{
HSIStatus = RCC->CTRL & RCC_CTRL_HSISTBL;
StartUpCounter++;
}
while((HSIStatus == 0) && (StartUpCounter != 0xFFFF));
if ((RCC->CTRL & RCC_CTRL_HSISTBL) != RESET)
{
HSIStatus = (uint32_t)0x01;
}
else
{
HSIStatus = (uint32_t)0x00;
}
if (HSIStatus == (uint32_t)0x01)
{
#if defined (AT32F415xx)
/* Enable Prefetch Buffer */
FLASH->ACR |= FLASH_ACR_PRFTBE;
/* Flash 1 wait state */
FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
[at32] auto formatted
2021-03-14 15:15:52 +08:00
FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;
[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver
2020-05-26 14:49:09 +08:00
#endif
/* HCLK = SYSCLK */
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
/* PCLK2 = HCLK */
RCC->CFG &= 0xFFFFC7FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV1;
/* PCLK1 = HCLK/2 */
RCC->CFG &= 0xFFFFF8FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
/* PLL configuration: PLLCLK = (HSI/2) * 12 = 48 MHz */
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSI_DIV2 | RCC_CFG_PLLMULT12);
/* Enable PLL */
RCC->CTRL |= RCC_CTRL_PLLEN;
/* Wait till PLL is ready */
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
{
}
/* Select PLL as system clock source */
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
{
}
#ifdef AT32F403xx
WaitHseStbl(PLL_STABLE_DELAY);
#endif
}
}
#elif defined SYSCLK_FREQ_56MHz_HSI
/**
* @brief Sets System clock frequency to 56MHz from HSI and configure HCLK, PCLK2
* and PCLK1 prescalers.
* @note This function should be used only after reset.
* @param None
* @retval None
*/
static void SetSysClockTo56MHSI(void)
{
__IO uint32_t StartUpCounter = 0, HSIStatus = 0;
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
/* Enable HSI */
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSIEN);
/* Wait till HSI is ready and if Time out is reached exit */
do
{
HSIStatus = RCC->CTRL & RCC_CTRL_HSISTBL;
StartUpCounter++;
}
while((HSIStatus == 0) && (StartUpCounter != 0xFFFF));
if ((RCC->CTRL & RCC_CTRL_HSISTBL) != RESET)
{
HSIStatus = (uint32_t)0x01;
}
else
{
HSIStatus = (uint32_t)0x00;
}
if (HSIStatus == (uint32_t)0x01)
{
#if defined (AT32F415xx)
/* Enable Prefetch Buffer */
FLASH->ACR |= FLASH_ACR_PRFTBE;
/* Flash 1 wait state */
FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
[at32] auto formatted
2021-03-14 15:15:52 +08:00
FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;
[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver
2020-05-26 14:49:09 +08:00
#endif
/* HCLK = SYSCLK */
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
/* PCLK2 = HCLK */
RCC->CFG &= 0xFFFFC7FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV1;
/* PCLK1 = HCLK/2 */
RCC->CFG &= 0xFFFFF8FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
/* PLL configuration: PLLCLK = (HSI/2) * 14 = 56 MHz */
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSI_DIV2 | RCC_CFG_PLLMULT14);
/* Enable PLL */
RCC->CTRL |= RCC_CTRL_PLLEN;
/* Wait till PLL is ready */
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
{
}
/* Select PLL as system clock source */
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
{
}
#ifdef AT32F403xx
WaitHseStbl(PLL_STABLE_DELAY);
#endif
}
}
#elif defined SYSCLK_FREQ_72MHz_HSI
/**
* @brief Sets System clock frequency to 72MHz from HSI and configure HCLK, PCLK2
* and PCLK1 prescalers.
* @note This function should be used only after reset.
* @param None
* @retval None
*/
static void SetSysClockTo72MHSI(void)
{
__IO uint32_t StartUpCounter = 0, HSIStatus = 0;
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
/* Enable HSI */
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSIEN);
/* Wait till HSI is ready and if Time out is reached exit */
do
{
HSIStatus = RCC->CTRL & RCC_CTRL_HSISTBL;
StartUpCounter++;
}
while((HSIStatus == 0) && (StartUpCounter != 0xFFFF));
if ((RCC->CTRL & RCC_CTRL_HSISTBL) != RESET)
{
HSIStatus = (uint32_t)0x01;
}
else
{
HSIStatus = (uint32_t)0x00;
}
if (HSIStatus == (uint32_t)0x01)
{
#if defined (AT32F415xx)
/* Enable Prefetch Buffer */
FLASH->ACR |= FLASH_ACR_PRFTBE;
/* Flash 1 wait state */
FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
[at32] auto formatted
2021-03-14 15:15:52 +08:00
FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2;
[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver
2020-05-26 14:49:09 +08:00
#endif
/* HCLK = SYSCLK */
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
/* PCLK2 = HCLK */
RCC->CFG &= 0xFFFFC7FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV1;
/* PCLK1 = HCLK/2 */
RCC->CFG &= 0xFFFFF8FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
/* PLL configuration: PLLCLK = (HSI/2) * 18 = 72 MHz */
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSI_DIV2 | RCC_CFG_PLLMULT18);
/* Enable PLL */
RCC->CTRL |= RCC_CTRL_PLLEN;
/* Wait till PLL is ready */
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
{
}
/* Select PLL as system clock source */
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
{
}
#ifdef AT32F403xx
WaitHseStbl(PLL_STABLE_DELAY);
#endif
}
}
#elif defined SYSCLK_FREQ_96MHz_HSI
/**
* @brief Sets System clock frequency to 96MHz from HSI and configure HCLK, PCLK2
* and PCLK1 prescalers.
* @note This function should be used only after reset.
* @param None
* @retval None
*/
static void SetSysClockTo96MHSI(void)
{
__IO uint32_t StartUpCounter = 0, HSIStatus = 0;
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
/* Enable HSI */
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSIEN);
/* Wait till HSI is ready and if Time out is reached exit */
do
{
HSIStatus = RCC->CTRL & RCC_CTRL_HSISTBL;
StartUpCounter++;
}
while((HSIStatus == 0) && (StartUpCounter != 0xFFFF));
if ((RCC->CTRL & RCC_CTRL_HSISTBL) != RESET)
{
HSIStatus = (uint32_t)0x01;
}
else
{
HSIStatus = (uint32_t)0x00;
}
if (HSIStatus == (uint32_t)0x01)
{
#if defined (AT32F415xx)
/* Enable Prefetch Buffer */
FLASH->ACR |= FLASH_ACR_PRFTBE;
/* Flash 1 wait state */
FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
[at32] auto formatted
2021-03-14 15:15:52 +08:00
FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2;
[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver
2020-05-26 14:49:09 +08:00
#endif
/* HCLK = SYSCLK */
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
/* PCLK2 = HCLK/2 */
RCC->CFG &= 0xFFFFC7FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
/* PCLK1 = HCLK/2 */
RCC->CFG &= 0xFFFFF8FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
/* PLL configuration: PLLCLK = (HSI/2) * 24 = 96 MHz */
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
#if defined (AT32F415xx)
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSI_DIV2 | RCC_CFG_PLLMULT24);
#else
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSI_DIV2 | RCC_CFG_PLLMULT24 | RCC_CFG_PLLRANGE_GT72MHZ);
#endif
/* Enable PLL */
RCC->CTRL |= RCC_CTRL_PLLEN;
/* Wait till PLL is ready */
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
{
}
/* Select PLL as system clock source */
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
{
}
#ifdef AT32F403xx
WaitHseStbl(PLL_STABLE_DELAY);
#endif
}
}
#elif defined SYSCLK_FREQ_108MHz_HSI
/**
* @brief Sets System clock frequency to 108MHz from HSI and configure HCLK, PCLK2
* and PCLK1 prescalers.
* @note This function should be used only after reset.
* @param None
* @retval None
*/
static void SetSysClockTo108MHSI(void)
{
__IO uint32_t StartUpCounter = 0, HSIStatus = 0;
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
/* Enable HSI */
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSIEN);
/* Wait till HSI is ready and if Time out is reached exit */
do
{
HSIStatus = RCC->CTRL & RCC_CTRL_HSISTBL;
StartUpCounter++;
}
while((HSIStatus == 0) && (StartUpCounter != 0xFFFF));
if ((RCC->CTRL & RCC_CTRL_HSISTBL) != RESET)
{
HSIStatus = (uint32_t)0x01;
}
else
{
HSIStatus = (uint32_t)0x00;
}
if (HSIStatus == (uint32_t)0x01)
{
#if defined (AT32F415xx)
/* Enable Prefetch Buffer */
FLASH->ACR |= FLASH_ACR_PRFTBE;
/* Flash 1 wait state */
FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
[at32] auto formatted
2021-03-14 15:15:52 +08:00
FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_3;
[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver
2020-05-26 14:49:09 +08:00
#endif
/* HCLK = SYSCLK */
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
/* PCLK2 = HCLK/2 */
RCC->CFG &= 0xFFFFC7FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
/* PCLK1 = HCLK/2 */
RCC->CFG &= 0xFFFFF8FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
/* PLL configuration: PLLCLK = (HSI/2) * 27 = 108 MHz */
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
#if defined (AT32F415xx)
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSI_DIV2 | RCC_CFG_PLLMULT27);
#else
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSI_DIV2 | RCC_CFG_PLLMULT27 | RCC_CFG_PLLRANGE_GT72MHZ);
#endif
/* Enable PLL */
RCC->CTRL |= RCC_CTRL_PLLEN;
/* Wait till PLL is ready */
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
{
}
/* Select PLL as system clock source */
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
{
}
#ifdef AT32F403xx
WaitHseStbl(PLL_STABLE_DELAY);
#endif
}
}
#elif defined SYSCLK_FREQ_120MHz_HSI
/**
* @brief Sets System clock frequency to 120MHz from HSI and configure HCLK, PCLK2
* and PCLK1 prescalers.
* @note This function should be used only after reset.
* @param None
* @retval None
*/
static void SetSysClockTo120MHSI(void)
{
__IO uint32_t StartUpCounter = 0, HSIStatus = 0;
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
/* Enable HSI */
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSIEN);
/* Wait till HSI is ready and if Time out is reached exit */
do
{
HSIStatus = RCC->CTRL & RCC_CTRL_HSISTBL;
StartUpCounter++;
}
while((HSIStatus == 0) && (StartUpCounter != 0xFFFF));
if ((RCC->CTRL & RCC_CTRL_HSISTBL) != RESET)
{
HSIStatus = (uint32_t)0x01;
}
else
{
HSIStatus = (uint32_t)0x00;
}
if (HSIStatus == (uint32_t)0x01)
{
#if defined (AT32F415xx)
/* Enable Prefetch Buffer */
FLASH->ACR |= FLASH_ACR_PRFTBE;
/* Flash 1 wait state */
FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
[at32] auto formatted
2021-03-14 15:15:52 +08:00
FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_3;
[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver
2020-05-26 14:49:09 +08:00
#endif
/* HCLK = SYSCLK */
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
/* PCLK2 = HCLK/2 */
RCC->CFG &= 0xFFFFC7FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
/* PCLK1 = HCLK/2 */
RCC->CFG &= 0xFFFFF8FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
/* PLL configuration: PLLCLK = (HSI/2) * 30 = 120 MHz */
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
#if defined (AT32F415xx)
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSI_DIV2 | RCC_CFG_PLLMULT30);
#else
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSI_DIV2 | RCC_CFG_PLLMULT30 | RCC_CFG_PLLRANGE_GT72MHZ);
#endif
/* Enable PLL */
RCC->CTRL |= RCC_CTRL_PLLEN;
/* Wait till PLL is ready */
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
{
}
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
defined (AT32F407xx) || defined (AT32F415xx)
RCC_StepModeCmd(ENABLE);
#endif
/* Select PLL as system clock source */
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
{
}
#ifdef AT32F403xx
WaitHseStbl(PLL_STABLE_DELAY);
#endif
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
defined (AT32F407xx) || defined (AT32F415xx)
RCC_StepModeCmd(DISABLE);
#endif
}
}
#elif defined SYSCLK_FREQ_144MHz_HSI
/**
* @brief Sets System clock frequency to 144MHz from HSI and configure HCLK, PCLK2
* and PCLK1 prescalers.
* @note This function should be used only after reset.
* @param None
* @retval None
*/
static void SetSysClockTo144MHSI(void)
{
__IO uint32_t StartUpCounter = 0, HSIStatus = 0;
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
/* Enable HSI */
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSIEN);
/* Wait till HSI is ready and if Time out is reached exit */
do
{
HSIStatus = RCC->CTRL & RCC_CTRL_HSISTBL;
StartUpCounter++;
}
while((HSIStatus == 0) && (StartUpCounter != 0xFFFF));
if ((RCC->CTRL & RCC_CTRL_HSISTBL) != RESET)
{
HSIStatus = (uint32_t)0x01;
}
else
{
HSIStatus = (uint32_t)0x00;
}
if (HSIStatus == (uint32_t)0x01)
{
#if defined (AT32F415xx)
/* Enable Prefetch Buffer */
FLASH->ACR |= FLASH_ACR_PRFTBE;
/* Flash 1 wait state */
FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
[at32] auto formatted
2021-03-14 15:15:52 +08:00
FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_4;
[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver
2020-05-26 14:49:09 +08:00
#endif
/* HCLK = SYSCLK */
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
/* PCLK2 = HCLK/2 */
RCC->CFG &= 0xFFFFC7FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
/* PCLK1 = HCLK/2 */
RCC->CFG &= 0xFFFFF8FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
/* PLL configuration: PLLCLK = (HSI/2) * 36 = 144 MHz */
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
#if defined (AT32F415xx)
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSI_DIV2 | RCC_CFG_PLLMULT36);
#else
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSI_DIV2 | RCC_CFG_PLLMULT36 | RCC_CFG_PLLRANGE_GT72MHZ);
#endif
/* Enable PLL */
RCC->CTRL |= RCC_CTRL_PLLEN;
/* Wait till PLL is ready */
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
{
}
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
defined (AT32F407xx) || defined (AT32F415xx)
RCC_StepModeCmd(ENABLE);
#endif
/* Select PLL as system clock source */
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
{
}
#ifdef AT32F403xx
WaitHseStbl(PLL_STABLE_DELAY);
#endif
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
defined (AT32F407xx) || defined (AT32F415xx)
RCC_StepModeCmd(DISABLE);
#endif
}
}
#elif defined SYSCLK_FREQ_150MHz_HSI
/**
* @brief Sets System clock frequency to 150MHz from HSI and configure HCLK, PCLK2
* and PCLK1 prescalers.
* @note This function should be used only after reset.
* @param None
* @retval None
*/
static void SetSysClockTo150MHSI(void)
{
__IO uint32_t StartUpCounter = 0, HSIStatus = 0;
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
/* Enable HSI */
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSIEN);
/* Wait till HSI is ready and if Time out is reached exit */
do
{
HSIStatus = RCC->CTRL & RCC_CTRL_HSISTBL;
StartUpCounter++;
}
while((HSIStatus == 0) && (StartUpCounter != 0xFFFF));
if ((RCC->CTRL & RCC_CTRL_HSISTBL) != RESET)
{
HSIStatus = (uint32_t)0x01;
}
else
{
HSIStatus = (uint32_t)0x00;
}
if (HSIStatus == (uint32_t)0x01)
{
#if defined (AT32F415xx)
/* Enable Prefetch Buffer */
FLASH->ACR |= FLASH_ACR_PRFTBE;
/* Flash 1 wait state */
FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
[at32] auto formatted
2021-03-14 15:15:52 +08:00
FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_4;
[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver
2020-05-26 14:49:09 +08:00
#endif
/* HCLK = SYSCLK */
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
/* PCLK2 = HCLK/2 */
RCC->CFG &= 0xFFFFC7FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
/* PCLK1 = HCLK/2 */
RCC->CFG &= 0xFFFFF8FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
/* PLL configuration: PLLCLK = ((HSI/2) * 150) / (1 * 4) = 150 MHz */
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSI_DIV2);
RCC_PLLconfig2(PLL_FREF_4M, 150, 1, PLL_FR_4);
/* Enable PLL */
RCC->CTRL |= RCC_CTRL_PLLEN;
/* Wait till PLL is ready */
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
{
}
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
defined (AT32F407xx) || defined (AT32F415xx)
RCC_StepModeCmd(ENABLE);
#endif
/* Select PLL as system clock source */
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
{
}
#ifdef AT32F403xx
WaitHseStbl(PLL_STABLE_DELAY);
#endif
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
defined (AT32F407xx) || defined (AT32F415xx)
RCC_StepModeCmd(DISABLE);
#endif
}
}
#elif defined SYSCLK_FREQ_168MHz_HSI
/**
* @brief Sets System clock frequency to 168MHz from HSI and configure HCLK, PCLK2
* and PCLK1 prescalers.
* @note This function should be used only after reset.
* @param None
* @retval None
*/
static void SetSysClockTo168MHSI(void)
{
__IO uint32_t StartUpCounter = 0, HSIStatus = 0;
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
/* Enable HSI */
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSIEN);
/* Wait till HSI is ready and if Time out is reached exit */
do
{
HSIStatus = RCC->CTRL & RCC_CTRL_HSISTBL;
StartUpCounter++;
}
while((HSIStatus == 0) && (StartUpCounter != 0xFFFF));
if ((RCC->CTRL & RCC_CTRL_HSISTBL) != RESET)
{
HSIStatus = (uint32_t)0x01;
}
else
{
HSIStatus = (uint32_t)0x00;
}
if (HSIStatus == (uint32_t)0x01)
{
/* HCLK = SYSCLK */
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
/* PCLK2 = HCLK/2 */
RCC->CFG &= 0xFFFFC7FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
/* PCLK1 = HCLK/2 */
RCC->CFG &= 0xFFFFF8FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
/* PLL configuration: PLLCLK = (HSI/2) * 42 = 168 MHz */
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSI_DIV2 | RCC_CFG_PLLMULT42 | RCC_CFG_PLLRANGE_GT72MHZ);
/* Enable PLL */
RCC->CTRL |= RCC_CTRL_PLLEN;
/* Wait till PLL is ready */
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
{
}
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
defined (AT32F407xx)
RCC_StepModeCmd(ENABLE);
#endif
/* Select PLL as system clock source */
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
{
}
#ifdef AT32F403xx
WaitHseStbl(PLL_STABLE_DELAY);
#endif
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
defined (AT32F407xx)
RCC_StepModeCmd(DISABLE);
#endif
}
}
#elif defined SYSCLK_FREQ_176MHz_HSI
/**
* @brief Sets System clock frequency to 176MHz from HSI and configure HCLK, PCLK2
* and PCLK1 prescalers.
* @note This function should be used only after reset.
* @param None
* @retval None
*/
static void SetSysClockTo176MHSI(void)
{
__IO uint32_t StartUpCounter = 0, HSIStatus = 0;
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
/* Enable HSI */
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSIEN);
/* Wait till HSI is ready and if Time out is reached exit */
do
{
HSIStatus = RCC->CTRL & RCC_CTRL_HSISTBL;
StartUpCounter++;
}
while((HSIStatus == 0) && (StartUpCounter != 0xFFFF));
if ((RCC->CTRL & RCC_CTRL_HSISTBL) != RESET)
{
HSIStatus = (uint32_t)0x01;
}
else
{
HSIStatus = (uint32_t)0x00;
}
if (HSIStatus == (uint32_t)0x01)
{
/* HCLK = SYSCLK */
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
/* PCLK2 = HCLK/2 */
RCC->CFG &= 0xFFFFC7FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
/* PCLK1 = HCLK/2 */
RCC->CFG &= 0xFFFFF8FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
/* PLL configuration: PLLCLK = (HSI/2) * 44 = 176 MHz */
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSI_DIV2 | RCC_CFG_PLLMULT44 | RCC_CFG_PLLRANGE_GT72MHZ);
/* Enable PLL */
RCC->CTRL |= RCC_CTRL_PLLEN;
/* Wait till PLL is ready */
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
{
}
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
defined (AT32F407xx)
RCC_StepModeCmd(ENABLE);
#endif
/* Select PLL as system clock source */
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
{
}
#ifdef AT32F403xx
WaitHseStbl(PLL_STABLE_DELAY);
#endif
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
defined (AT32F407xx)
RCC_StepModeCmd(DISABLE);
#endif
}
}
#elif defined SYSCLK_FREQ_192MHz_HSI
/**
* @brief Sets System clock frequency to 192MHz from HSI and configure HCLK, PCLK2
* and PCLK1 prescalers.
* @note This function should be used only after reset.
* @param None
* @retval None
*/
static void SetSysClockTo192MHSI(void)
{
__IO uint32_t StartUpCounter = 0, HSIStatus = 0;
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
/* Enable HSI */
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSIEN);
/* Wait till HSI is ready and if Time out is reached exit */
do
{
HSIStatus = RCC->CTRL & RCC_CTRL_HSISTBL;
StartUpCounter++;
}
while((HSIStatus == 0) && (StartUpCounter != 0xFFFF));
if ((RCC->CTRL & RCC_CTRL_HSISTBL) != RESET)
{
HSIStatus = (uint32_t)0x01;
}
else
{
HSIStatus = (uint32_t)0x00;
}
if (HSIStatus == (uint32_t)0x01)
{
/* HCLK = SYSCLK */
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
/* PCLK2 = HCLK/2 */
RCC->CFG &= 0xFFFFC7FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
/* PCLK1 = HCLK/2 */
RCC->CFG &= 0xFFFFF8FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
/* PLL configuration: PLLCLK = (HSI/2) * 48 = 192 MHz */
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSI_DIV2 | RCC_CFG_PLLMULT48 | RCC_CFG_PLLRANGE_GT72MHZ);
/* Enable PLL */
RCC->CTRL |= RCC_CTRL_PLLEN;
/* Wait till PLL is ready */
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
{
}
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
defined (AT32F407xx)
RCC_StepModeCmd(ENABLE);
#endif
/* Select PLL as system clock source */
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
{
}
#ifdef AT32F403xx
WaitHseStbl(PLL_STABLE_DELAY);
#endif
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
defined (AT32F407xx)
RCC_StepModeCmd(DISABLE);
#endif
}
}
#elif defined SYSCLK_FREQ_200MHz_HSI
/**
* @brief Sets System clock frequency to 200MHz from HSI and configure HCLK, PCLK2
* and PCLK1 prescalers.
* @note This function should be used only after reset.
* @param None
* @retval None
*/
static void SetSysClockTo200MHSI(void)
{
__IO uint32_t StartUpCounter = 0, HSIStatus = 0;
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
/* Enable HSI */
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSIEN);
/* Wait till HSI is ready and if Time out is reached exit */
do
{
HSIStatus = RCC->CTRL & RCC_CTRL_HSISTBL;
StartUpCounter++;
}
while((HSIStatus == 0) && (StartUpCounter != 0xFFFF));
if ((RCC->CTRL & RCC_CTRL_HSISTBL) != RESET)
{
HSIStatus = (uint32_t)0x01;
}
else
{
HSIStatus = (uint32_t)0x00;
}
if (HSIStatus == (uint32_t)0x01)
{
/* HCLK = SYSCLK */
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
/* PCLK2 = HCLK/2 */
RCC->CFG &= 0xFFFFC7FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
/* PCLK1 = HCLK/2 */
RCC->CFG &= 0xFFFFF8FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
/* PLL configuration: PLLCLK = (HSI/2) * 50 = 200 MHz */
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSI_DIV2 | RCC_CFG_PLLMULT50 | RCC_CFG_PLLRANGE_GT72MHZ);
/* Enable PLL */
RCC->CTRL |= RCC_CTRL_PLLEN;
/* Wait till PLL is ready */
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
{
}
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
defined (AT32F407xx)
RCC_StepModeCmd(ENABLE);
#endif
/* Select PLL as system clock source */
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
{
}
#ifdef AT32F403xx
WaitHseStbl(PLL_STABLE_DELAY);
#endif
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
defined (AT32F407xx)
RCC_StepModeCmd(DISABLE);
#endif
}
}
#elif defined SYSCLK_FREQ_224MHz_HSI
/**
* @brief Sets System clock frequency to 224MHz from HSI and configure HCLK, PCLK2
* and PCLK1 prescalers.
* @note This function should be used only after reset.
* @param None
* @retval None
*/
static void SetSysClockTo224MHSI(void)
{
__IO uint32_t StartUpCounter = 0, HSIStatus = 0;
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
/* Enable HSI */
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSIEN);
/* Wait till HSI is ready and if Time out is reached exit */
do
{
HSIStatus = RCC->CTRL & RCC_CTRL_HSISTBL;
StartUpCounter++;
}
while((HSIStatus == 0) && (StartUpCounter != 0xFFFF));
if ((RCC->CTRL & RCC_CTRL_HSISTBL) != RESET)
{
HSIStatus = (uint32_t)0x01;
}
else
{
HSIStatus = (uint32_t)0x00;
}
if (HSIStatus == (uint32_t)0x01)
{
/* HCLK = SYSCLK */
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
/* PCLK2 = HCLK/2 */
RCC->CFG &= 0xFFFFC7FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
/* PCLK1 = HCLK/2 */
RCC->CFG &= 0xFFFFF8FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
/* PLL configuration: PLLCLK = (HSI/2) * 56 = 224 MHz */
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSI_DIV2 | RCC_CFG_PLLMULT56 | RCC_CFG_PLLRANGE_GT72MHZ);
/* Enable PLL */
RCC->CTRL |= RCC_CTRL_PLLEN;
/* Wait till PLL is ready */
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
{
}
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
defined (AT32F407xx)
RCC_StepModeCmd(ENABLE);
#endif
/* Select PLL as system clock source */
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
{
}
#ifdef AT32F403xx
WaitHseStbl(PLL_STABLE_DELAY);
#endif
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
defined (AT32F407xx)
RCC_StepModeCmd(DISABLE);
#endif
}
}
#elif defined SYSCLK_FREQ_240MHz_HSI
/**
* @brief Sets System clock frequency to 240MHz from HSI and configure HCLK, PCLK2
* and PCLK1 prescalers.
* @note This function should be used only after reset.
* @param None
* @retval None
*/
static void SetSysClockTo240MHSI(void)
{
__IO uint32_t StartUpCounter = 0, HSIStatus = 0;
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
/* Enable HSI */
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSIEN);
/* Wait till HSI is ready and if Time out is reached exit */
do
{
HSIStatus = RCC->CTRL & RCC_CTRL_HSISTBL;
StartUpCounter++;
}
while((HSIStatus == 0) && (StartUpCounter != 0xFFFF));
if ((RCC->CTRL & RCC_CTRL_HSISTBL) != RESET)
{
HSIStatus = (uint32_t)0x01;
}
else
{
HSIStatus = (uint32_t)0x00;
}
if (HSIStatus == (uint32_t)0x01)
{
/* HCLK = SYSCLK */
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
/* PCLK2 = HCLK/2 */
RCC->CFG &= 0xFFFFC7FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
/* PCLK1 = HCLK/2 */
RCC->CFG &= 0xFFFFF8FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
/* PLL configuration: PLLCLK = (HSI/2) * 60 = 240 MHz */
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSI_DIV2 | RCC_CFG_PLLMULT60 | RCC_CFG_PLLRANGE_GT72MHZ);
/* Enable PLL */
RCC->CTRL |= RCC_CTRL_PLLEN;
/* Wait till PLL is ready */
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
{
}
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
defined (AT32F407xx)
RCC_StepModeCmd(ENABLE);
#endif
/* Select PLL as system clock source */
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
{
}
#ifdef AT32F403xx
WaitHseStbl(PLL_STABLE_DELAY);
#endif
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
defined (AT32F407xx)
RCC_StepModeCmd(DISABLE);
#endif
}
}
#endif
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
[at32] auto formatted
2021-03-14 15:15:52 +08:00
/******************* (C) COPYRIGHT 2018 ArteryTek *****END OF FILE****/