rt-thread/bsp/raspberry-pi/raspi4-64/drivers/Kconfig


config BSP_SUPPORT_FPU
    bool "Using Float"
    default n

menuconfig BSP_USING_VM_MODE
    bool "Enable VM mode"
    default n

menu "Hardware Drivers Config"
    menu "BCM Peripheral Drivers"
        menuconfig BSP_USING_UART
            bool "Using UART"
            select RT_USING_SERIAL
            default y

            if BSP_USING_UART
                config RT_USING_UART0
                bool "Enable UART 0"
                default y

                config RT_USING_UART1
                bool "Enable UART 1"
                default n

                config RT_USING_UART3
                bool "Enable UART 3"
                default n

                config RT_USING_UART4
                bool "Enable UART 4"
                default n

                config RT_USING_UART5
                bool "Enable UART 5"
                default n
            endif
            
        menuconfig BSP_USING_GIC
            bool "Enable GIC"
            select RT_USING_GIC
            default y
        if BSP_USING_GIC
            config BSP_USING_GICV2
                bool "Enable GIC400(GICV2)"
                default y
            config BSP_USING_GICV3
                bool "Enable GIC500(GICV3)"
                default n
        endif

        config BSP_USING_PIN
            bool "Using PIN"
            select RT_USING_PIN
            default y

            menuconfig BSP_USING_SPI
            bool "Enable SPI"
            select RT_USING_SPI
            default n
        
        if BSP_USING_SPI   
            config BSP_USING_SPI0_BUS
                bool "Enable SPI0 BUS"
                default n
            config BSP_USING_SPI0_DEVICE0
                bool "Enable SPI0 DEVICE0"
                select BSP_USING_SPI0_BUS
                default n
            config BSP_USING_SPI0_DEVICE1
                bool "Enable SPI0 DEVICE1"
                select BSP_USING_SPI0_BUS
                default n
        endif

        config BSP_USING_CORETIMER
            bool "Using core timer"
            select RT_USING_CORETIMER
            default y

        menuconfig BSP_USING_SYSTIMER
            bool "Enable SYSTIMER"
            default n

        if  BSP_USING_SYSTIMER
            config RT_USING_SYSTIMER1
                bool "Enable sys timer1"
                default n
            config RT_USING_SYSTIMER3
                bool "Enable sys timer3"
                default n
        endif

        config BSP_USING_WDT
            bool "Enable WDT"
            select RT_USING_WDT
            default n

        menuconfig BSP_USING_RTC
            bool "Enable RTC"
            select RT_USING_RTC
            default n

        if BSP_USING_RTC
            config BSP_USING_ALARM
                bool "Enable Alarm"
                select RT_USING_ALARM
                default n
        endif

        menuconfig BSP_USING_SDIO
            bool "Enable SDIO"
            select RT_USING_SDIO
            default n

        if BSP_USING_SDIO
            config BSP_USING_SDIO0
                bool "Enable SDIO0"
                select RT_USING_SDIO
                default n
        endif
    endmenu

    menu "Board Peripheral Drivers"
        menuconfig BSP_USING_HDMI
            bool "Enable HDMI"
            default n

        if BSP_USING_HDMI
            config BSP_USING_HDMI_DISPLAY
                bool "HDMI DISPLAY"
                default n
        endif

        menuconfig BSP_USING_TOUCH
            bool "Enable Touch"
            default n
    endmenu
endmenu
[bsp] rpi 4b smart & rtos fixups (#7114) * [bsp] rpi 4b smart & rtos fixups * [format] remove spaces & modify readme * [bsp] update rpi4b readme 2023-03-29 18:31:05 +08:00
			`config BSP_SUPPORT_FPU`
			`bool "Using Float"`
			`default n`

			`menuconfig BSP_USING_VM_MODE`
			`bool "Enable VM mode"`
			`default n`

add raspi4 bsp 2020-04-16 16:10:57 +08:00			`menu "Hardware Drivers Config"`
			`menu "BCM Peripheral Drivers"`
			`menuconfig BSP_USING_UART`
			`bool "Using UART"`
			`select RT_USING_SERIAL`
			`default y`

			`if BSP_USING_UART`
			`config RT_USING_UART0`
[libcpu/aarch64] add smp support 2022-01-07 13:49:06 +08:00			`bool "Enable UART 0"`
add raspi4 bsp 2020-04-16 16:10:57 +08:00			`default y`
Merge AArch64 libcpu and add some drivers for their bsps 2021-09-22 17:57:45 +08:00
			`config RT_USING_UART1`
[libcpu/aarch64] add smp support 2022-01-07 13:49:06 +08:00			`bool "Enable UART 1"`
Merge AArch64 libcpu and add some drivers for their bsps 2021-09-22 17:57:45 +08:00			`default n`

			`config RT_USING_UART3`
[libcpu/aarch64] add smp support 2022-01-07 13:49:06 +08:00			`bool "Enable UART 3"`
Merge AArch64 libcpu and add some drivers for their bsps 2021-09-22 17:57:45 +08:00			`default n`

			`config RT_USING_UART4`
[libcpu/aarch64] add smp support 2022-01-07 13:49:06 +08:00			`bool "Enable UART 4"`
Merge AArch64 libcpu and add some drivers for their bsps 2021-09-22 17:57:45 +08:00			`default n`

			`config RT_USING_UART5`
[libcpu/aarch64] add smp support 2022-01-07 13:49:06 +08:00			`bool "Enable UART 5"`
Merge AArch64 libcpu and add some drivers for their bsps 2021-09-22 17:57:45 +08:00			`default n`
add raspi4 bsp 2020-04-16 16:10:57 +08:00			`endif`
[bsp] rpi 4b smart & rtos fixups (#7114) * [bsp] rpi 4b smart & rtos fixups * [format] remove spaces & modify readme * [bsp] update rpi4b readme 2023-03-29 18:31:05 +08:00
			`menuconfig BSP_USING_GIC`
			`bool "Enable GIC"`
			`select RT_USING_GIC`
add raspi4 bsp 2020-04-16 16:10:57 +08:00			`default y`
[bsp] rpi 4b smart & rtos fixups (#7114) * [bsp] rpi 4b smart & rtos fixups * [format] remove spaces & modify readme * [bsp] update rpi4b readme 2023-03-29 18:31:05 +08:00			`if BSP_USING_GIC`
[libcpu/aarch64] add gicv3 support and bsp/rockchip/rk3568 (#5722) * [libcpu/aarch64] add smp support * [libcpu/aarch64] rt_hw_trap_irq get irq instead of iar when using gicv2 * [libcpu/aarch64] disable irq/fiq when switch thread * [libcpu/aarch64] add gtimer frq set and stack align * [libcpu/aarch64] add gicv3 support and bsp/rockchip/rk3568 2022-03-29 11:08:25 +08:00			`config BSP_USING_GICV2`
[bsp] rpi 4b smart & rtos fixups (#7114) * [bsp] rpi 4b smart & rtos fixups * [format] remove spaces & modify readme * [bsp] update rpi4b readme 2023-03-29 18:31:05 +08:00			`bool "Enable GIC400(GICV2)"`
[libcpu/aarch64] add gicv3 support and bsp/rockchip/rk3568 (#5722) * [libcpu/aarch64] add smp support * [libcpu/aarch64] rt_hw_trap_irq get irq instead of iar when using gicv2 * [libcpu/aarch64] disable irq/fiq when switch thread * [libcpu/aarch64] add gtimer frq set and stack align * [libcpu/aarch64] add gicv3 support and bsp/rockchip/rk3568 2022-03-29 11:08:25 +08:00			`default y`
[bsp] rpi 4b smart & rtos fixups (#7114) * [bsp] rpi 4b smart & rtos fixups * [format] remove spaces & modify readme * [bsp] update rpi4b readme 2023-03-29 18:31:05 +08:00			`config BSP_USING_GICV3`
			`bool "Enable GIC500(GICV3)"`
			`default n`
			`endif`
[libcpu/aarch64] add gicv3 support and bsp/rockchip/rk3568 (#5722) * [libcpu/aarch64] add smp support * [libcpu/aarch64] rt_hw_trap_irq get irq instead of iar when using gicv2 * [libcpu/aarch64] disable irq/fiq when switch thread * [libcpu/aarch64] add gtimer frq set and stack align * [libcpu/aarch64] add gicv3 support and bsp/rockchip/rk3568 2022-03-29 11:08:25 +08:00
add raspi4 bsp 2020-04-16 16:10:57 +08:00			`config BSP_USING_PIN`
			`bool "Using PIN"`
			`select RT_USING_PIN`
			`default y`

[bsp] rpi 4b smart & rtos fixups (#7114) * [bsp] rpi 4b smart & rtos fixups * [format] remove spaces & modify readme * [bsp] update rpi4b readme 2023-03-29 18:31:05 +08:00			`menuconfig BSP_USING_SPI`
			`bool "Enable SPI"`
			`select RT_USING_SPI`
			`default n`

			`if BSP_USING_SPI`
			`config BSP_USING_SPI0_BUS`
			`bool "Enable SPI0 BUS"`
			`default n`
			`config BSP_USING_SPI0_DEVICE0`
			`bool "Enable SPI0 DEVICE0"`
			`select BSP_USING_SPI0_BUS`
			`default n`
			`config BSP_USING_SPI0_DEVICE1`
			`bool "Enable SPI0 DEVICE1"`
			`select BSP_USING_SPI0_BUS`
			`default n`
			`endif`

add raspi4 bsp 2020-04-16 16:10:57 +08:00			`config BSP_USING_CORETIMER`
			`bool "Using core timer"`
			`select RT_USING_CORETIMER`
			`default y`

			`menuconfig BSP_USING_SYSTIMER`
			`bool "Enable SYSTIMER"`
			`default n`

			`if BSP_USING_SYSTIMER`
			`config RT_USING_SYSTIMER1`
			`bool "Enable sys timer1"`
			`default n`
			`config RT_USING_SYSTIMER3`
			`bool "Enable sys timer3"`
			`default n`
			`endif`

			`config BSP_USING_WDT`
			`bool "Enable WDT"`
			`select RT_USING_WDT`
			`default n`

			`menuconfig BSP_USING_RTC`
			`bool "Enable RTC"`
			`select RT_USING_RTC`
			`default n`

			`if BSP_USING_RTC`
			`config BSP_USING_ALARM`
			`bool "Enable Alarm"`
			`select RT_USING_ALARM`
			`default n`
			`endif`
format Kconfig and sconscript 2023-01-09 10:14:23 +08:00
add raspi4 bsp 2020-04-16 16:10:57 +08:00			`menuconfig BSP_USING_SDIO`
			`bool "Enable SDIO"`
			`select RT_USING_SDIO`
			`default n`

			`if BSP_USING_SDIO`
			`config BSP_USING_SDIO0`
			`bool "Enable SDIO0"`
			`select RT_USING_SDIO`
			`default n`
			`endif`
			`endmenu`

			`menu "Board Peripheral Drivers"`
			`menuconfig BSP_USING_HDMI`
			`bool "Enable HDMI"`
			`default n`

			`if BSP_USING_HDMI`
			`config BSP_USING_HDMI_DISPLAY`
			`bool "HDMI DISPLAY"`
			`default n`
			`endif`
[bsp] rpi 4b smart & rtos fixups (#7114) * [bsp] rpi 4b smart & rtos fixups * [format] remove spaces & modify readme * [bsp] update rpi4b readme 2023-03-29 18:31:05 +08:00
			`menuconfig BSP_USING_TOUCH`
			`bool "Enable Touch"`
			`default n`
add raspi4 bsp 2020-04-16 16:10:57 +08:00			`endmenu`
			`endmenu`