2022-09-26 10:38:35 +08:00
|
|
|
/*
|
|
|
|
|
* Copyright (c) 2006-2022, RT-Thread Development Team
|
|
|
|
|
*
|
|
|
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
|
|
|
*
|
|
|
|
|
* Change Logs:
|
|
|
|
|
* Date Author Notes
|
|
|
|
|
* 2022-09-21 Meco Man first version
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#include <Arduino.h>
|
|
|
|
|
#include "pins_arduino.h"
|
2023-12-23 13:33:28 +08:00
|
|
|
#include <drv_gpio.h>
|
2022-09-26 10:38:35 +08:00
|
|
|
|
2024-02-23 12:45:05 +08:00
|
|
|
#define DBG_TAG "RTduino.pins_arduino"
|
|
|
|
|
#define DBG_LVL DBG_INFO
|
|
|
|
|
#include <rtdbg.h>
|
|
|
|
|
|
2022-09-26 10:38:35 +08:00
|
|
|
/*
|
|
|
|
|
* {Arduino Pin, RT-Thread Pin [, Device Name, Channel]}
|
|
|
|
|
* [] means optional
|
|
|
|
|
* Digital pins must NOT give the device name and channel.
|
|
|
|
|
* Analog pins MUST give the device name and channel(ADC, PWM or DAC).
|
|
|
|
|
* Arduino Pin must keep in sequence.
|
|
|
|
|
*/
|
|
|
|
|
const pin_map_t pin_map_table[]=
|
|
|
|
|
{
|
|
|
|
|
{D0, GET_PIN(G,9), "uart3"}, /* Serial-xx */
|
|
|
|
|
{D1, GET_PIN(G,14), "uart3"}, /* Serial-xx */
|
|
|
|
|
{D2, GET_PIN(F,15)},
|
|
|
|
|
{D3, GET_PIN(E,13), "pwm1", 3}, /* PWM */
|
|
|
|
|
{D4, GET_PIN(F,14)},
|
|
|
|
|
{D5, GET_PIN(E,11), "pwm1", 2}, /* PWM */
|
|
|
|
|
{D6, GET_PIN(E,9), "pwm1", 1}, /* PWM */
|
|
|
|
|
{D7, GET_PIN(F,13)},
|
|
|
|
|
{D8, GET_PIN(F,12)},
|
|
|
|
|
{D9, GET_PIN(D,15), "pwm4", 4}, /* PWM */
|
|
|
|
|
{D10, GET_PIN(D,14), "pwm4", 3}, /* PWM */
|
|
|
|
|
{D11, GET_PIN(A,7), "pwm14", 1}, /* PWM */
|
|
|
|
|
{D12, GET_PIN(A,6)},
|
|
|
|
|
{D13, GET_PIN(A,5)},
|
|
|
|
|
{D14, GET_PIN(B,9), "i2c1"}, /* I2C-SDA (Wire) */
|
|
|
|
|
{D15, GET_PIN(B,8), "i2c1"}, /* I2C-SCL (Wire) */
|
|
|
|
|
{D16, GET_PIN(C,13)}, /* USER KEY */
|
|
|
|
|
{D17, GET_PIN(B,0)}, /* LED_BUILTIN, USER LED1 */
|
|
|
|
|
{D18, GET_PIN(B,7)}, /* USER LED2 */
|
|
|
|
|
{D19, GET_PIN(B,14)}, /* USER LED3 */
|
|
|
|
|
{A0, GET_PIN(A,3), "adc1", 3}, /* ADC */
|
|
|
|
|
{A1, GET_PIN(C,0), "adc1", 10}, /* ADC */
|
|
|
|
|
{A2, GET_PIN(C,3), "adc1", 13}, /* ADC */
|
|
|
|
|
{A3, GET_PIN(C,1), "adc1", 11}, /* ADC */
|
|
|
|
|
{A4, GET_PIN(C,4), "adc1", 14}, /* ADC */
|
|
|
|
|
{A5, GET_PIN(C,5), "adc1", 15}, /* ADC */
|
2023-04-08 16:08:50 +08:00
|
|
|
{A6, RT_NULL, "adc1", RT_ADC_INTERN_CH_VREF}, /* ADC, On-Chip: internal reference voltage */
|
|
|
|
|
{A7, RT_NULL, "adc1", RT_ADC_INTERN_CH_TEMPER}, /* ADC, On-Chip: internal temperature sensor */
|
2022-09-26 10:38:35 +08:00
|
|
|
};
|
2024-02-23 12:45:05 +08:00
|
|
|
|
|
|
|
|
#ifdef RTDUINO_USING_SPI
|
|
|
|
|
void switchToSPI(const char *bus_name)
|
|
|
|
|
{
|
|
|
|
|
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
|
|
|
|
|
|
|
|
|
if(!rt_strcmp(bus_name, "spi1"))
|
|
|
|
|
{
|
|
|
|
|
__HAL_RCC_SPI1_CLK_ENABLE();
|
|
|
|
|
__HAL_RCC_GPIOA_CLK_ENABLE();
|
|
|
|
|
|
|
|
|
|
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_5);
|
|
|
|
|
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_6);
|
|
|
|
|
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_7);
|
|
|
|
|
|
|
|
|
|
/**SPI1 GPIO Configuration
|
|
|
|
|
PA5 ------> SPI1_SCK
|
|
|
|
|
PA6 ------> SPI1_MISO
|
|
|
|
|
PA7 ------> SPI1_MOSI
|
|
|
|
|
*/
|
|
|
|
|
GPIO_InitStruct.Pin = GPIO_PIN_5 | GPIO_PIN_6 | GPIO_PIN_7;
|
|
|
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
|
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
|
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
|
|
|
GPIO_InitStruct.Alternate = GPIO_AF5_SPI1;
|
|
|
|
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
|
|
|
|
|
|
|
|
LOG_W("D11, D12 and D13 will switch from PWM to SPI");
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
#endif /* RTDUINO_USING_SPI */
|
