rt-thread/bsp/upd70f3454/applilet3_src/CG_macrodriver.h

111 lines
4.5 KiB
C
Raw Normal View History

/*
*******************************************************************************
* Copyright(C) NEC Electronics Corporation 2010
* All rights reserved by NEC Electronics Corporation.
* This program should be used on your own responsibility.
* NEC Electronics Corporation assumes no responsibility for any losses
* incurred by customers or third parties arising from the use of this file.
*
* This device driver was created by Applilet3 for V850ES/Jx3
* 32-Bit Single-Chip Microcontrollers
* Filename: CG_macrodriver.h
* Abstract: This file implements general head file.
* APIlib: Applilet3 for V850ES/Jx3 V2.01 [20 Apr 2010]
* Device: uPD70F3746
* Compiler: IAR Systems ICCV850
* Creation date: 6/26/2010
*******************************************************************************
*/
#ifndef _MDSTATUS_
#define _MDSTATUS_
/*
*******************************************************************************
** Include files
*******************************************************************************
*/
#include <intrinsics.h>
#include "io70f3454.h"
/*
*******************************************************************************
** Register bit define
*******************************************************************************
*/
/*
*******************************************************************************
** Macro define
*******************************************************************************
*/
#define DI __disable_interrupt
#define EI __enable_interrupt
#define NOP __no_operation
#define HALT __halt
/* Data type defintion */
typedef unsigned long ULONG;
typedef signed long SLONG;
typedef unsigned int UINT;
typedef signed int SINT;
typedef unsigned short USHORT;
typedef signed short SHORT;
typedef unsigned char UCHAR;
typedef signed char SCHAR;
typedef unsigned char BOOL;
typedef unsigned short MD_STATUS;
#define MD_ON 1U
#define MD_OFF 0U
#define MD_TRUE 1U
#define MD_FALSE 0U
#define MD_SET 1U
#define MD_CLEAR 0U
/* Status list definition */
#define MD_STATUSBASE 0x00U
#define MD_OK (MD_STATUSBASE + 0x00U) /* register setting OK */
#define MD_RESET (MD_STATUSBASE + 0x01U) /* reset input */
#define MD_SENDCOMPLETE (MD_STATUSBASE + 0x02U) /* send data complete */
#define MD_ADDRESSMATCH (MD_STATUSBASE + 0x03U) /* IIC slave address match */
#define MD_OVF (MD_STATUSBASE + 0x04U) /* timer count overflow */
#define MD_SPT (MD_STATUSBASE + 0x07U) /* IIC stop */
#define MD_NACK (MD_STATUSBASE + 0x08U) /* IIC no ACK */
#define MD_SLAVE_SEND_END (MD_STATUSBASE + 0x09U) /* IIC slave send end */
#define MD_SLAVE_RCV_END (MD_STATUSBASE + 0x0AU) /* IIC slave receive end */
#define MD_MASTER_SEND_END (MD_STATUSBASE + 0x0BU) /* IIC master send end */
#define MD_MASTER_RCV_END (MD_STATUSBASE + 0x0CU) /* IIC master receive end */
#define MD_UNDEREXEC (MD_STATUSBASE + 0x0DU) /* DMA transfer under execute */
#define MD_COMPLETED (MD_STATUSBASE + 0x0EU) /* DMA transfer completed */
#define MD_BUSY1 (MD_STATUSBASE + 0x0FU) /* busy 1 */
#define MD_BUSY2 (MD_STATUSBASE + 0x10U) /* busy 2 */
/* Error list definition */
#define MD_ERRORBASE 0x80U
#define MD_ERROR (MD_ERRORBASE + 0x00U) /* error */
#define MD_RESOURCEERROR (MD_ERRORBASE + 0x01U) /* no resource available */
#define MD_PARITYERROR (MD_ERRORBASE + 0x02U) /* UARTn parity error n=0,1,2 */
#define MD_OVERRUNERROR (MD_ERRORBASE + 0x03U) /* UARTn overrun error n=0,1,2 */
#define MD_FRAMEERROR (MD_ERRORBASE + 0x04U) /* UARTn frame error n=0,1,2 */
#define MD_ARGERROR (MD_ERRORBASE + 0x05U) /* Error agrument input error */
#define MD_TIMINGERROR (MD_ERRORBASE + 0x06U) /* Error timing operation error */
#define MD_SETPROHIBITED (MD_ERRORBASE + 0x07U) /* setting prohibited */
#define MD_ODDBUF (MD_ERRORBASE + 0x08U) /* in 16bit transfer mode,buffer size should be even */
#define MD_DATAEXISTS (MD_ERRORBASE + 0x09U) /* Data to be transferred next exists in TXBn register */
#define MD_STSERROR (MD_ERRORBASE + 0x0AU) /* CAN status error */
#define MD_ALRDYSTART (MD_ERRORBASE + 0x0BU) /* CAN-controller is already started error */
#define MD_NOMSG (MD_ERRORBASE + 0x0CU) /* CAN message not received */
#define MD_ERROR1 (MD_ERRORBASE + 0x0DU) /* error 1 */
#define MD_ERROR2 (MD_ERRORBASE + 0x0EU) /* error 2 */
/*
*******************************************************************************
** Function define
*******************************************************************************
*/
#endif