libs/rt-thread
libs
/
rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
rt-thread/bsp/nuvoton/nk-980iot/board/Kconfig

121 lines
3.6 KiB
Plaintext
Raw Normal View History

Update nuvoton porting. 1. Make up sources and bugfix. 2. Add nu_gpio_pin_get. 3. Add PM operator in USB host driver. 4. Support NUC980 stage 1 and add nk-980iot board.
2020-12-21 14:34:01 +08:00
menu "Hardware Drivers Config"
menu "On-chip Peripheral Drivers"
source "$BSP_DIR/../libraries/nuc980/rtt_port/Kconfig"
endmenu
menu "On-board Peripheral Drivers"
config BSP_USING_CONSOLE
bool "Enable UART0 for RTT Console(uart0)"
select BSP_USING_UART
select BSP_USING_UART0
default y
config BOARD_USING_IP101GR
bool "Enable ethernet phy supporting(over emac/mdio)"
select BSP_USING_EMAC
default n
Update nuvoton RTT porting. 1. Fix porting driver. 2. Add NAU8822 audio codec driver. 3. Add NUC980 I2S porting driver.
2020-12-25 18:39:12 +08:00
config BOARD_USING_NAU8822
bool "NAU8822 Audio Codec supporting(over i2s, i2c0)"
select NU_PKG_USING_NAU8822
Update nuvoton porting. 1. Make up sources and bugfix. 2. Add nu_gpio_pin_get. 3. Add PM operator in USB host driver. 4. Support NUC980 stage 1 and add nk-980iot board.
2020-12-21 14:34:01 +08:00
select BSP_USING_I2C0
select BSP_USING_I2S
select BSP_USING_I2S0
default n
config BOARD_USING_STORAGE_SDCARD
bool "SDCARD supporting(over sdh1)"
select BSP_USING_SDH
select BSP_USING_SDH1
default y
config BOARD_USING_STORAGE_SPIFLASH
Sync Nuvoton porting. 1. NUC980 platform: USBH, INPUTCAPTURE, SPINAND. 2. Correct enter-quad-mode routine in board_dec.c. 3. Use RT_ASSERT to catch system-call-exceptions.
2021-02-01 10:35:44 +08:00
bool "SPI NOR FLASH supporting(over qspi0)"
Update nuvoton porting. 1. Make up sources and bugfix. 2. Add nu_gpio_pin_get. 3. Add PM operator in USB host driver. 4. Support NUC980 stage 1 and add nk-980iot board.
2020-12-21 14:34:01 +08:00
select BSP_USING_QSPI
select BSP_USING_QSPI0
Sync Nuvoton porting. 1. NUC980 platform: USBH, INPUTCAPTURE, SPINAND. 2. Correct enter-quad-mode routine in board_dec.c. 3. Use RT_ASSERT to catch system-call-exceptions.
2021-02-01 10:35:44 +08:00
default n
Update nuvoton porting. 1. Make up sources and bugfix. 2. Add nu_gpio_pin_get. 3. Add PM operator in USB host driver. 4. Support NUC980 stage 1 and add nk-980iot board.
2020-12-21 14:34:01 +08:00
Sync Nuvoton porting. 1. NUC980 platform: USBH, INPUTCAPTURE, SPINAND. 2. Correct enter-quad-mode routine in board_dec.c. 3. Use RT_ASSERT to catch system-call-exceptions.
2021-02-01 10:35:44 +08:00
config BOARD_USING_STORAGE_SPINAND
bool "SPI NAND FLASH supporting(over qspi0)"
select BSP_USING_QSPI
select BSP_USING_QSPI0
select NU_PKG_USING_SPINAND
default y
Update nuvoton porting. 1. Make up sources and bugfix. 2. Add nu_gpio_pin_get. 3. Add PM operator in USB host driver. 4. Support NUC980 stage 1 and add nk-980iot board.
2020-12-21 14:34:01 +08:00
Sync Nuvoton porting. 1. NUC980 platform: USBH, INPUTCAPTURE, SPINAND. 2. Correct enter-quad-mode routine in board_dec.c. 3. Use RT_ASSERT to catch system-call-exceptions.
2021-02-01 10:35:44 +08:00
config BOARD_USING_USB0_DEVICE_HOST
select BSP_USING_USBH
select BSP_USING_USBD
bool "Enable USB0 Device/Host"
help
Choose this option if you need USB device or host function mode.
If you need USB host, please remember short to ground on JP1 jumper.
config BOARD_USING_USB1_HOST
select BSP_USING_USBH
bool "Enable USB1 Host"
help
Choose this option if you need USB1 HOST.
Update nuvoton porting. 1. Make up sources and bugfix. 2. Add nu_gpio_pin_get. 3. Add PM operator in USB host driver. 4. Support NUC980 stage 1 and add nk-980iot board.
2020-12-21 14:34:01 +08:00
endmenu
menu "Board extended module drivers"
config BOARD_USING_MAX31875
bool "MAX31875 Temperature sensor(over i2c1)"
select NU_PKG_USING_MAX31875
select BSP_USING_I2C1
default n
config BOARD_USING_LCD_ILI9341
bool "LCD ILI9341 (over spi0)"
Update drivers. 1. Improve LVGL avg FPS. 2. Sync configuration to 4.1.0.
2022-01-05 14:38:20 +08:00
select RT_USING_TOUCH
[Nuvoton] Update drivers (#5501) * Update drivers. 1. Improve LVGL avg FPS. 2. Sync configuration to 4.1.0. * [Nuvoton] Update drivers. 1. Fix open-control order issue in CAN driver. 2. [N9H30] Improve N9H30 I2C busy-wait implementation. 3. [N9H30] Support 1024x600x32b LCD panel. 4. Move nu_packages menu into sub-menu of board. * Update menu-option. 1. Set BOARD_USING_LCM is on by default. 2. Fix default value setting in choice-option. * Fix control function in I2C driver. * Add sdk_dist.py and ADC touching calibration function. Co-authored-by: Wayne Lin <wclin@nuvoton.com>
2022-01-16 18:43:27 +08:00
select BSP_USING_ADC_TOUCH
Nuvoton drivers updating and more LVGL supporting. (#5647)
2022-03-12 07:00:53 +08:00
select NU_PKG_USING_ADC_TOUCH
Update nuvoton porting. 1. Make up sources and bugfix. 2. Add nu_gpio_pin_get. 3. Add PM operator in USB host driver. 4. Support NUC980 stage 1 and add nk-980iot board.
2020-12-21 14:34:01 +08:00
select NU_PKG_USING_ILI9341
select NU_PKG_USING_ILI9341_SPI
Update drivers. 1. Improve LVGL avg FPS. 2. Sync configuration to 4.1.0.
2022-01-05 14:38:20 +08:00
select NU_PKG_ILI9341_WITH_OFFSCREEN_FRAMEBUFFER
select NU_PKG_ILI9341_HORIZONTAL
Update nuvoton porting. 1. Make up sources and bugfix. 2. Add nu_gpio_pin_get. 3. Add PM operator in USB host driver. 4. Support NUC980 stage 1 and add nk-980iot board.
2020-12-21 14:34:01 +08:00
select BSP_USING_SPI0
Update drivers. 1. Improve LVGL avg FPS. 2. Sync configuration to 4.1.0.
2022-01-05 14:38:20 +08:00
select PKG_USING_LVGL
select PKG_USING_LV_MUSIC_DEMO
Update nuvoton porting. 1. Make up sources and bugfix. 2. Add nu_gpio_pin_get. 3. Add PM operator in USB host driver. 4. Support NUC980 stage 1 and add nk-980iot board.
2020-12-21 14:34:01 +08:00
default n
if BOARD_USING_LCD_ILI9341
config BOARD_USING_ILI9341_PIN_BACKLIGHT
int "Specify the pin index of backlight pin index"
range 0 127
default 103
config BOARD_USING_ILI9341_PIN_RESET
int "Specify the pin index of reset pin index"
range 0 127
default 90
config BOARD_USING_ILI9341_PIN_DC
int "Specify the pin index of data&command switching"
range 0 127
default 89
endif
config BOARD_USING_ESP8266
bool "ESP8266 Wi-Fi module supporting(over uart1)"
select BSP_USING_UART
select BSP_USING_UART1
select BSP_USING_UART1_RX_DMA
select BSP_USING_UART1_TX_DMA
select PKG_USING_AT_DEVICE
select AT_DEVICE_USING_ESP8266
select AT_DEVICE_ESP8266_INIT_ASYN
default n
endmenu
[Nuvoton] Update drivers (#5501) * Update drivers. 1. Improve LVGL avg FPS. 2. Sync configuration to 4.1.0. * [Nuvoton] Update drivers. 1. Fix open-control order issue in CAN driver. 2. [N9H30] Improve N9H30 I2C busy-wait implementation. 3. [N9H30] Support 1024x600x32b LCD panel. 4. Move nu_packages menu into sub-menu of board. * Update menu-option. 1. Set BOARD_USING_LCM is on by default. 2. Fix default value setting in choice-option. * Fix control function in I2C driver. * Add sdk_dist.py and ADC touching calibration function. Co-authored-by: Wayne Lin <wclin@nuvoton.com>
2022-01-16 18:43:27 +08:00
source "$BSP_DIR/../libraries/nu_packages/Kconfig"
Update nuvoton porting. 1. Make up sources and bugfix. 2. Add nu_gpio_pin_get. 3. Add PM operator in USB host driver. 4. Support NUC980 stage 1 and add nk-980iot board.
2020-12-21 14:34:01 +08:00
endmenu