rt-thread/bsp/apm32/apm32f407zg-evalboard/board/Kconfig

menu "Hardware Drivers Config"

config SOC_APM32F407ZG
    bool
    select SOC_SERIES_APM32F4
    select RT_USING_COMPONENTS_INIT
    select RT_USING_USER_MAIN
    default y

menu "Onboard Peripheral Drivers"

    config BSP_USING_USB_TO_USART
        bool "Enable USB TO USART (uart1)"
        select BSP_USING_UART
        select BSP_USING_UART1
        default y

    config BSP_USING_SPI_FLASH
        bool "Enable SPI FLASH (W25Q16 spi1)"
        select BSP_USING_SPI
        select BSP_USING_SPI1
        select RT_USING_SFUD
        select RT_SFUD_USING_SFDP
        default n

    config BSP_USING_ETH
        bool "Enable Ethernet"
        default n
        select RT_USING_LWIP
        select RT_USING_POSIX_FS
        select RT_USING_POSIX_SOCKET

    config PHY_USING_LAN8720A
        bool
        depends on BSP_USING_ETH
        default y

endmenu

menu "On-chip Peripheral Drivers"

    config BSP_USING_GPIO
        bool "Enable GPIO"
        select RT_USING_PIN
        default y

    menuconfig BSP_USING_UART
        bool "Enable UART"
        default y
        select RT_USING_SERIAL
        if BSP_USING_UART
            config BSP_USING_UART1
                bool "Enable UART1"
                default y
            config BSP_USING_UART2
                bool "Enable UART2"
                default n
        endif

    menuconfig BSP_USING_ADC
        bool "Enable ADC"
        default n
        select RT_USING_ADC
        if BSP_USING_ADC
            config BSP_USING_ADC1
                bool "Enable ADC1"
                default n
            config BSP_USING_ADC2
                bool "Enable ADC2"
                default n
            config BSP_USING_ADC3
                bool "Enable ADC3"
                default n
        endif

    menuconfig BSP_USING_DAC
        bool "Enable DAC"
        default n
        select RT_USING_DAC
        if BSP_USING_DAC
            config BSP_USING_DAC1
                bool "Enable DAC1"
                default n
        endif

    menuconfig BSP_USING_ONCHIP_RTC
        bool "Enable RTC"
        select RT_USING_RTC
        default n
        if BSP_USING_ONCHIP_RTC
            choice
                prompt "Select clock source"
                default BSP_RTC_USING_LSE

                config BSP_RTC_USING_LSE
                    bool "RTC USING LSE"

                config BSP_RTC_USING_LSI
                    bool "RTC USING LSI"
            endchoice
        endif

    menuconfig BSP_USING_I2C
        bool "Enable I2C BUS (software simulation)"
        default n
        select RT_USING_I2C
        select RT_USING_I2C_BITOPS
        select RT_USING_PIN
        if BSP_USING_I2C
            config BSP_USING_I2C1
                bool "Enable I2C1 BUS"
                if BSP_USING_I2C1
                    comment "Notice: PB6 --> 22; PB7 --> 23"
                    config BSP_I2C1_SCL_PIN
                        int "i2c1 scl pin number"
                        range 0 63
                        default 22
                    config BSP_I2C1_SDA_PIN
                        int "I2C1 sda pin number"
                        range 0 63
                        default 23
                endif
            config BSP_USING_I2C2
                bool "Enable I2C2 BUS"
                if BSP_USING_I2C2
                    comment "Notice: PA0 --> 0; PA1 --> 1"
                    config BSP_I2C2_SCL_PIN
                        int "i2c2 scl pin number"
                        range 0 63
                        default 0
                    config BSP_I2C2_SDA_PIN
                        int "I2C2 sda pin number"
                        range 0 63
                        default 1
                endif
        endif

    menuconfig BSP_USING_SPI
        bool "Enable SPI"
        default n
        select RT_USING_SPI
        if BSP_USING_SPI
            config BSP_USING_SPI1
                bool "Enable SPI1"
                default n

            config BSP_USING_SPI2
                bool "Enable SPI2"
                default n

            config BSP_USING_SPI3
                bool "Enable SPI3"
                default n
        endif

    menuconfig BSP_USING_TMR
        bool "Enable Timer"
        default n
        select RT_USING_HWTIMER
        if BSP_USING_TMR
            config BSP_USING_TMR1
                bool "Enable TMR1"
                default n

            config BSP_USING_TMR2
                bool "Enable TMR2"
                default n

            config BSP_USING_TMR3
                bool "Enable TMR3"
                default n

            config BSP_USING_TMR4
                bool "Enable TMR4"
                default n

            config BSP_USING_TMR5
                bool "Enable TMR5"
                default n

            config BSP_USING_TMR6
                bool "Enable TMR6"
                default n

            config BSP_USING_TMR7
                bool "Enable TMR7"
                default n

            config BSP_USING_TMR8
                bool "Enable TMR8"
                default n

            config BSP_USING_TMR9
                bool "Enable TMR9"
                default n

            config BSP_USING_TMR10
                bool "Enable TMR10"
                default n

            config BSP_USING_TMR11
                bool "Enable TMR11"
                default n

            config BSP_USING_TMR12
                bool "Enable TMR12"
                default n

            config BSP_USING_TMR13
                bool "Enable TMR13"
                default n

            config BSP_USING_TMR14
                bool "Enable TMR14"
                default n
        endif

    menuconfig BSP_USING_PWM
        bool "Enable PWM"
        default n
        select RT_USING_PWM
        if BSP_USING_PWM
        menuconfig BSP_USING_PWM3
            bool "Enable timer3 output PWM"
            default n
            if BSP_USING_PWM3
                config BSP_USING_PWM3_CH1
                    bool "Enable PWM3 channel1"
                    default n

                config BSP_USING_PWM3_CH2
                    bool "Enable PWM3 channel2"
                    default n

                config BSP_USING_PWM3_CH3
                    bool "Enable PWM3 channel3"
                    default n

                config BSP_USING_PWM3_CH4
                    bool "Enable PWM3 channel4"
                    default n
            endif
        endif

    config BSP_USING_WDT
        bool "Enable Watchdog Timer"
        select RT_USING_WDT
        default n

endmenu

menu "Board extended module Drivers"

endmenu

endmenu
add some apm32 bsp and fix apm32f0/apm32f1 gcc startup assembly file bug and fix apm32 drv_eth.c bug (#6855) * add some apm32 bsp and fix apm32f0/apm32f4 gcc startup assembly file bug and fix drv_eth.c bug * fix apm32f103xe-minibroard and apm32f407ig-minibroard link.lds file error * replace apm32f051r8-evalboard picture * fix apm32f1 gcc assembly startup file suffix name * renamed startup_apm32f10x_md.s/startup_apm32f10x_hd.s file and modify apm32f103xe-minibroard/board SConscript file 2023-01-16 10:16:02 +08:00			`menu "Hardware Drivers Config"`

			`config SOC_APM32F407ZG`
			`bool`
			`select SOC_SERIES_APM32F4`
			`select RT_USING_COMPONENTS_INIT`
			`select RT_USING_USER_MAIN`
			`default y`

			`menu "Onboard Peripheral Drivers"`

			`config BSP_USING_USB_TO_USART`
			`bool "Enable USB TO USART (uart1)"`
			`select BSP_USING_UART`
			`select BSP_USING_UART1`
			`default y`

			`config BSP_USING_SPI_FLASH`
			`bool "Enable SPI FLASH (W25Q16 spi1)"`
			`select BSP_USING_SPI`
			`select BSP_USING_SPI1`
			`select RT_USING_SFUD`
			`select RT_SFUD_USING_SFDP`
			`default n`

			`config BSP_USING_ETH`
			`bool "Enable Ethernet"`
			`default n`
			`select RT_USING_LWIP`
			`select RT_USING_POSIX_FS`
			`select RT_USING_POSIX_SOCKET`

			`config PHY_USING_LAN8720A`
			`bool`
			`depends on BSP_USING_ETH`
			`default y`

			`endmenu`

			`menu "On-chip Peripheral Drivers"`

			`config BSP_USING_GPIO`
			`bool "Enable GPIO"`
			`select RT_USING_PIN`
			`default y`

			`menuconfig BSP_USING_UART`
			`bool "Enable UART"`
			`default y`
			`select RT_USING_SERIAL`
			`if BSP_USING_UART`
			`config BSP_USING_UART1`
			`bool "Enable UART1"`
			`default y`
			`config BSP_USING_UART2`
			`bool "Enable UART2"`
			`default n`
			`endif`

			`menuconfig BSP_USING_ADC`
			`bool "Enable ADC"`
			`default n`
			`select RT_USING_ADC`
			`if BSP_USING_ADC`
			`config BSP_USING_ADC1`
			`bool "Enable ADC1"`
			`default n`
			`config BSP_USING_ADC2`
			`bool "Enable ADC2"`
			`default n`
			`config BSP_USING_ADC3`
			`bool "Enable ADC3"`
			`default n`
			`endif`

			`menuconfig BSP_USING_DAC`
			`bool "Enable DAC"`
			`default n`
			`select RT_USING_DAC`
			`if BSP_USING_DAC`
			`config BSP_USING_DAC1`
			`bool "Enable DAC1"`
			`default n`
			`endif`

			`menuconfig BSP_USING_ONCHIP_RTC`
			`bool "Enable RTC"`
			`select RT_USING_RTC`
			`default n`
			`if BSP_USING_ONCHIP_RTC`
			`choice`
			`prompt "Select clock source"`
			`default BSP_RTC_USING_LSE`

			`config BSP_RTC_USING_LSE`
			`bool "RTC USING LSE"`

			`config BSP_RTC_USING_LSI`
			`bool "RTC USING LSI"`
			`endchoice`
			`endif`

			`menuconfig BSP_USING_I2C`
			`bool "Enable I2C BUS (software simulation)"`
			`default n`
			`select RT_USING_I2C`
			`select RT_USING_I2C_BITOPS`
			`select RT_USING_PIN`
			`if BSP_USING_I2C`
			`config BSP_USING_I2C1`
			`bool "Enable I2C1 BUS"`
			`if BSP_USING_I2C1`
			`comment "Notice: PB6 --> 22; PB7 --> 23"`
			`config BSP_I2C1_SCL_PIN`
			`int "i2c1 scl pin number"`
			`range 0 63`
			`default 22`
			`config BSP_I2C1_SDA_PIN`
			`int "I2C1 sda pin number"`
			`range 0 63`
			`default 23`
			`endif`
			`config BSP_USING_I2C2`
			`bool "Enable I2C2 BUS"`
			`if BSP_USING_I2C2`
			`comment "Notice: PA0 --> 0; PA1 --> 1"`
			`config BSP_I2C2_SCL_PIN`
			`int "i2c2 scl pin number"`
			`range 0 63`
			`default 0`
			`config BSP_I2C2_SDA_PIN`
			`int "I2C2 sda pin number"`
			`range 0 63`
			`default 1`
			`endif`
			`endif`

			`menuconfig BSP_USING_SPI`
			`bool "Enable SPI"`
			`default n`
			`select RT_USING_SPI`
			`if BSP_USING_SPI`
			`config BSP_USING_SPI1`
			`bool "Enable SPI1"`
			`default n`

			`config BSP_USING_SPI2`
			`bool "Enable SPI2"`
			`default n`

			`config BSP_USING_SPI3`
			`bool "Enable SPI3"`
			`default n`
			`endif`

			`menuconfig BSP_USING_TMR`
			`bool "Enable Timer"`
			`default n`
			`select RT_USING_HWTIMER`
			`if BSP_USING_TMR`
			`config BSP_USING_TMR1`
			`bool "Enable TMR1"`
			`default n`

			`config BSP_USING_TMR2`
			`bool "Enable TMR2"`
			`default n`

			`config BSP_USING_TMR3`
			`bool "Enable TMR3"`
			`default n`

			`config BSP_USING_TMR4`
			`bool "Enable TMR4"`
			`default n`

			`config BSP_USING_TMR5`
			`bool "Enable TMR5"`
			`default n`

			`config BSP_USING_TMR6`
			`bool "Enable TMR6"`
			`default n`

			`config BSP_USING_TMR7`
			`bool "Enable TMR7"`
			`default n`

			`config BSP_USING_TMR8`
			`bool "Enable TMR8"`
			`default n`

			`config BSP_USING_TMR9`
			`bool "Enable TMR9"`
			`default n`

			`config BSP_USING_TMR10`
			`bool "Enable TMR10"`
			`default n`

			`config BSP_USING_TMR11`
			`bool "Enable TMR11"`
			`default n`

			`config BSP_USING_TMR12`
			`bool "Enable TMR12"`
			`default n`

			`config BSP_USING_TMR13`
			`bool "Enable TMR13"`
			`default n`

			`config BSP_USING_TMR14`
			`bool "Enable TMR14"`
			`default n`
			`endif`

			`menuconfig BSP_USING_PWM`
			`bool "Enable PWM"`
			`default n`
			`select RT_USING_PWM`
			`if BSP_USING_PWM`
			`menuconfig BSP_USING_PWM3`
			`bool "Enable timer3 output PWM"`
			`default n`
			`if BSP_USING_PWM3`
			`config BSP_USING_PWM3_CH1`
			`bool "Enable PWM3 channel1"`
			`default n`

			`config BSP_USING_PWM3_CH2`
			`bool "Enable PWM3 channel2"`
			`default n`

			`config BSP_USING_PWM3_CH3`
			`bool "Enable PWM3 channel3"`
			`default n`

			`config BSP_USING_PWM3_CH4`
			`bool "Enable PWM3 channel4"`
			`default n`
			`endif`
			`endif`

			`config BSP_USING_WDT`
			`bool "Enable Watchdog Timer"`
			`select RT_USING_WDT`
			`default n`

			`endmenu`

			`menu "Board extended module Drivers"`

			`endmenu`

			`endmenu`