714 lines
36 KiB
C
714 lines
36 KiB
C
|
/**************************************************************************//**
|
||
|
|
* @file M480.h
|
||
|
|
* @version V1.00
|
||
|
|
* @brief M480 peripheral access layer header file.
|
||
|
|
* This file contains all the peripheral register's definitions,
|
||
|
|
* bits definitions and memory mapping for NuMicro M480 MCU.
|
||
|
|
*
|
||
|
|
* SPDX-License-Identifier: Apache-2.0
|
||
|
|
* @copyright (C) 2017-2020 Nuvoton Technology Corp. All rights reserved.
|
||
|
|
*****************************************************************************/
|
||
|
|
/**
|
||
|
|
\mainpage NuMicro M480 Driver Reference Guide
|
||
|
|
*
|
||
|
|
* <b>Introduction</b>
|
||
|
|
*
|
||
|
|
* This user manual describes the usage of M480 Series MCU device driver
|
||
|
|
*
|
||
|
|
* <b>Disclaimer</b>
|
||
|
|
*
|
||
|
|
* The Software is furnished "AS IS", without warranty as to performance or results, and
|
||
|
|
* the entire risk as to performance or results is assumed by YOU. Nuvoton disclaims all
|
||
|
|
* warranties, express, implied or otherwise, with regard to the Software, its use, or
|
||
|
|
* operation, including without limitation any and all warranties of merchantability, fitness
|
||
|
|
* for a particular purpose, and non-infringement of intellectual property rights.
|
||
|
|
*
|
||
|
|
* <b>Important Notice</b>
|
||
|
|
*
|
||
|
|
* Nuvoton Products are neither intended nor warranted for usage in systems or equipment,
|
||
|
|
* any malfunction or failure of which may cause loss of human life, bodily injury or severe
|
||
|
|
* property damage. Such applications are deemed, "Insecure Usage".
|
||
|
|
*
|
||
|
|
* Insecure usage includes, but is not limited to: equipment for surgical implementation,
|
||
|
|
* atomic energy control instruments, airplane or spaceship instruments, the control or
|
||
|
|
* operation of dynamic, brake or safety systems designed for vehicular use, traffic signal
|
||
|
|
* instruments, all types of safety devices, and other applications intended to support or
|
||
|
|
* sustain life.
|
||
|
|
*
|
||
|
|
* All Insecure Usage shall be made at customer's risk, and in the event that third parties
|
||
|
|
* lay claims to Nuvoton as a result of customer's Insecure Usage, customer shall indemnify
|
||
|
|
* the damages and liabilities thus incurred by Nuvoton.
|
||
|
|
*
|
||
|
|
* Please note that all data and specifications are subject to change without notice. All the
|
||
|
|
* trademarks of products and companies mentioned in this datasheet belong to their respective
|
||
|
|
* owners.
|
||
|
|
*
|
||
|
|
* <b>Copyright Notice</b>
|
||
|
|
*
|
||
|
|
* Copyright (C) 2017-2020 Nuvoton Technology Corp. All rights reserved.
|
||
|
|
*/
|
||
|
|
#ifndef __M480_H__
|
||
|
|
#define __M480_H__
|
||
|
|
|
||
|
|
#ifdef __cplusplus
|
||
|
|
extern "C" {
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/******************************************************************************/
|
||
|
|
/* Processor and Core Peripherals */
|
||
|
|
/******************************************************************************/
|
||
|
|
/** @addtogroup CMSIS_Device Device CMSIS Definitions
|
||
|
|
Configuration of the Cortex-M4 Processor and Core Peripherals
|
||
|
|
@{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @details Interrupt Number Definition.
|
||
|
|
*/
|
||
|
|
typedef enum IRQn
|
||
|
|
{
|
||
|
|
/****** Cortex-M4 Processor Exceptions Numbers ***************************************************/
|
||
|
|
NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
|
||
|
|
MemoryManagement_IRQn = -12, /*!< 4 Memory Management Interrupt */
|
||
|
|
BusFault_IRQn = -11, /*!< 5 Bus Fault Interrupt */
|
||
|
|
UsageFault_IRQn = -10, /*!< 6 Usage Fault Interrupt */
|
||
|
|
SVCall_IRQn = -5, /*!< 11 SV Call Interrupt */
|
||
|
|
DebugMonitor_IRQn = -4, /*!< 12 Debug Monitor Interrupt */
|
||
|
|
PendSV_IRQn = -2, /*!< 14 Pend SV Interrupt */
|
||
|
|
SysTick_IRQn = -1, /*!< 15 System Tick Interrupt */
|
||
|
|
|
||
|
|
/****** M480 Specific Interrupt Numbers ********************************************************/
|
||
|
|
|
||
|
|
BOD_IRQn = 0, /*!< Brown Out detection Interrupt */
|
||
|
|
IRC_IRQn = 1, /*!< Internal RC Interrupt */
|
||
|
|
PWRWU_IRQn = 2, /*!< Power Down Wake Up Interrupt */
|
||
|
|
RAMPE_IRQn = 3, /*!< SRAM parity check failed Interrupt */
|
||
|
|
CKFAIL_IRQn = 4, /*!< Clock failed Interrupt */
|
||
|
|
RTC_IRQn = 6, /*!< Real Time Clock Interrupt */
|
||
|
|
TAMPER_IRQn = 7, /*!< Tamper detection Interrupt */
|
||
|
|
WDT_IRQn = 8, /*!< Watchdog timer Interrupt */
|
||
|
|
WWDT_IRQn = 9, /*!< Window Watchdog timer Interrupt */
|
||
|
|
EINT0_IRQn = 10, /*!< External Input 0 Interrupt */
|
||
|
|
EINT1_IRQn = 11, /*!< External Input 1 Interrupt */
|
||
|
|
EINT2_IRQn = 12, /*!< External Input 2 Interrupt */
|
||
|
|
EINT3_IRQn = 13, /*!< External Input 3 Interrupt */
|
||
|
|
EINT4_IRQn = 14, /*!< External Input 4 Interrupt */
|
||
|
|
EINT5_IRQn = 15, /*!< External Input 5 Interrupt */
|
||
|
|
GPA_IRQn = 16, /*!< GPIO Port A Interrupt */
|
||
|
|
GPB_IRQn = 17, /*!< GPIO Port B Interrupt */
|
||
|
|
GPC_IRQn = 18, /*!< GPIO Port C Interrupt */
|
||
|
|
GPD_IRQn = 19, /*!< GPIO Port D Interrupt */
|
||
|
|
GPE_IRQn = 20, /*!< GPIO Port E Interrupt */
|
||
|
|
GPF_IRQn = 21, /*!< GPIO Port F Interrupt */
|
||
|
|
QSPI0_IRQn = 22, /*!< QSPI0 Interrupt */
|
||
|
|
SPI0_IRQn = 23, /*!< SPI0 Interrupt */
|
||
|
|
BRAKE0_IRQn = 24, /*!< BRAKE0 Interrupt */
|
||
|
|
EPWM0P0_IRQn = 25, /*!< EPWM0P0 Interrupt */
|
||
|
|
EPWM0P1_IRQn = 26, /*!< EPWM0P1 Interrupt */
|
||
|
|
EPWM0P2_IRQn = 27, /*!< EPWM0P2 Interrupt */
|
||
|
|
BRAKE1_IRQn = 28, /*!< BRAKE1 Interrupt */
|
||
|
|
EPWM1P0_IRQn = 29, /*!< EPWM1P0 Interrupt */
|
||
|
|
EPWM1P1_IRQn = 30, /*!< EPWM1P1 Interrupt */
|
||
|
|
EPWM1P2_IRQn = 31, /*!< EPWM1P2 Interrupt */
|
||
|
|
TMR0_IRQn = 32, /*!< Timer 0 Interrupt */
|
||
|
|
TMR1_IRQn = 33, /*!< Timer 1 Interrupt */
|
||
|
|
TMR2_IRQn = 34, /*!< Timer 2 Interrupt */
|
||
|
|
TMR3_IRQn = 35, /*!< Timer 3 Interrupt */
|
||
|
|
UART0_IRQn = 36, /*!< UART 0 Interrupt */
|
||
|
|
UART1_IRQn = 37, /*!< UART 1 Interrupt */
|
||
|
|
I2C0_IRQn = 38, /*!< I2C 0 Interrupt */
|
||
|
|
I2C1_IRQn = 39, /*!< I2C 1 Interrupt */
|
||
|
|
PDMA_IRQn = 40, /*!< Peripheral DMA Interrupt */
|
||
|
|
DAC_IRQn = 41, /*!< DAC Interrupt */
|
||
|
|
EADC00_IRQn = 42, /*!< EADC00 Interrupt */
|
||
|
|
EADC01_IRQn = 43, /*!< EADC01 Interrupt */
|
||
|
|
ACMP01_IRQn = 44, /*!< Analog Comparator 0 and 1 Interrupt */
|
||
|
|
EADC02_IRQn = 46, /*!< EADC02 Interrupt */
|
||
|
|
EADC03_IRQn = 47, /*!< EADC03 Interrupt */
|
||
|
|
UART2_IRQn = 48, /*!< UART2 Interrupt */
|
||
|
|
UART3_IRQn = 49, /*!< UART3 Interrupt */
|
||
|
|
QSPI1_IRQn = 50, /*!< QSPI1 Interrupt */
|
||
|
|
SPI1_IRQn = 51, /*!< SPI1 Interrupt */
|
||
|
|
SPI2_IRQn = 52, /*!< SPI2 Interrupt */
|
||
|
|
USBD_IRQn = 53, /*!< USB device Interrupt */
|
||
|
|
USBH_IRQn = 54, /*!< USB host Interrupt */
|
||
|
|
USBOTG_IRQn = 55, /*!< USB OTG Interrupt */
|
||
|
|
CAN0_IRQn = 56, /*!< CAN0 Interrupt */
|
||
|
|
CAN1_IRQn = 57, /*!< CAN1 Interrupt */
|
||
|
|
SC0_IRQn = 58, /*!< Smart Card 0 Interrupt */
|
||
|
|
SC1_IRQn = 59, /*!< Smart Card 1 Interrupt */
|
||
|
|
SC2_IRQn = 60, /*!< Smart Card 2 Interrupt */
|
||
|
|
SPI3_IRQn = 62, /*!< SPI3 Interrupt */
|
||
|
|
EMAC_TX_IRQn = 66, /*!< Ethernet MAC TX Interrupt */
|
||
|
|
EMAC_RX_IRQn = 67, /*!< Ethernet MAC RX Interrupt */
|
||
|
|
SDH0_IRQn = 64, /*!< Secure Digital Host Controller 0 Interrupt */
|
||
|
|
USBD20_IRQn = 65, /*!< High Speed USB device Interrupt */
|
||
|
|
I2S0_IRQn = 68, /*!< I2S0 Interrupt */
|
||
|
|
OPA_IRQn = 70, /*!< OPA Interrupt */
|
||
|
|
CRPT_IRQn = 71, /*!< CRPT Interrupt */
|
||
|
|
GPG_IRQn = 72, /*!< GPIO Port G Interrupt */
|
||
|
|
EINT6_IRQn = 73, /*!< External Input 6 Interrupt */
|
||
|
|
UART4_IRQn = 74, /*!< UART4 Interrupt */
|
||
|
|
UART5_IRQn = 75, /*!< UART5 Interrupt */
|
||
|
|
USCI0_IRQn = 76, /*!< USCI0 Interrupt */
|
||
|
|
USCI1_IRQn = 77, /*!< USCI1 Interrupt */
|
||
|
|
BPWM0_IRQn = 78, /*!< BPWM0 Interrupt */
|
||
|
|
BPWM1_IRQn = 79, /*!< BPWM1 Interrupt */
|
||
|
|
SPIM_IRQn = 80, /*!< SPIM Interrupt */
|
||
|
|
CCAP_IRQn = 81, /*!< CCAP Interrupt */
|
||
|
|
I2C2_IRQn = 82, /*!< I2C2 Interrupt */
|
||
|
|
QEI0_IRQn = 84, /*!< QEI0 Interrupt */
|
||
|
|
QEI1_IRQn = 85, /*!< QEI1 Interrupt */
|
||
|
|
ECAP0_IRQn = 86, /*!< ECAP0 Interrupt */
|
||
|
|
ECAP1_IRQn = 87, /*!< ECAP1 Interrupt */
|
||
|
|
GPH_IRQn = 88, /*!< GPIO Port H Interrupt */
|
||
|
|
EINT7_IRQn = 89, /*!< External Input 7 Interrupt */
|
||
|
|
SDH1_IRQn = 90, /*!< Secure Digital Host Controller 1 Interrupt */
|
||
|
|
HSUSBH_IRQn = 92, /*!< High speed USB host Interrupt */
|
||
|
|
USBOTG20_IRQn = 93, /*!< High speed USB OTG Interrupt */
|
||
|
|
TRNG_IRQn = 101, /*!< TRNG Interrupt */
|
||
|
|
UART6_IRQn = 102, /*!< UART6 Interrupt */
|
||
|
|
UART7_IRQn = 103, /*!< UART7 Interrupt */
|
||
|
|
EADC10_IRQn = 104, /*!< EADC10 Interrupt */
|
||
|
|
EADC11_IRQn = 105, /*!< EADC11 Interrupt */
|
||
|
|
EADC12_IRQn = 106, /*!< EADC12 Interrupt */
|
||
|
|
EADC13_IRQn = 107, /*!< EADC13 Interrupt */
|
||
|
|
CAN2_IRQn = 108, /*!< CAN2 Interrupt */
|
||
|
|
}
|
||
|
|
IRQn_Type;
|
||
|
|
|
||
|
|
|
||
|
|
/*
|
||
|
|
* ==========================================================================
|
||
|
|
* ----------- Processor and Core Peripheral Section ------------------------
|
||
|
|
* ==========================================================================
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Configuration of the Cortex-M4 Processor and Core Peripherals */
|
||
|
|
#define __CM4_REV 0x0201UL /*!< Core Revision r2p1 */
|
||
|
|
#define __NVIC_PRIO_BITS 4UL /*!< Number of Bits used for Priority Levels */
|
||
|
|
#define __Vendor_SysTickConfig 0UL /*!< Set to 1 if different SysTick Config is used */
|
||
|
|
#define __MPU_PRESENT 1UL /*!< MPU present or not */
|
||
|
|
#ifdef __FPU_PRESENT
|
||
|
|
#undef __FPU_PRESENT
|
||
|
|
#define __FPU_PRESENT 1UL /*!< FPU present or not */
|
||
|
|
#else
|
||
|
|
#define __FPU_PRESENT 1UL /*!< FPU present or not */
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/*@}*/ /* end of group CMSIS_Device */
|
||
|
|
|
||
|
|
|
||
|
|
#include "core_cm4.h" /* Cortex-M4 processor and core peripherals */
|
||
|
|
#include "system_M480.h" /* System include file */
|
||
|
|
#include <stdint.h>
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
#if defined ( __CC_ARM )
|
||
|
|
#pragma anon_unions
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/******************************************************************************/
|
||
|
|
/* Register definitions */
|
||
|
|
/******************************************************************************/
|
||
|
|
|
||
|
|
#include "sys_reg.h"
|
||
|
|
#include "clk_reg.h"
|
||
|
|
#include "fmc_reg.h"
|
||
|
|
#include "gpio_reg.h"
|
||
|
|
#include "pdma_reg.h"
|
||
|
|
#include "timer_reg.h"
|
||
|
|
#include "wdt_reg.h"
|
||
|
|
#include "wwdt_reg.h"
|
||
|
|
#include "rtc_reg.h"
|
||
|
|
#include "epwm_reg.h"
|
||
|
|
#include "bpwm_reg.h"
|
||
|
|
#include "qei_reg.h"
|
||
|
|
#include "ecap_reg.h"
|
||
|
|
#include "uart_reg.h"
|
||
|
|
#include "emac_reg.h"
|
||
|
|
#include "sc_reg.h"
|
||
|
|
#include "i2s_reg.h"
|
||
|
|
#include "spi_reg.h"
|
||
|
|
#include "qspi_reg.h"
|
||
|
|
#include "spim_reg.h"
|
||
|
|
#include "i2c_reg.h"
|
||
|
|
#include "uuart_reg.h"
|
||
|
|
#include "uspi_reg.h"
|
||
|
|
#include "ui2c_reg.h"
|
||
|
|
#include "can_reg.h"
|
||
|
|
#include "sdh_reg.h"
|
||
|
|
#include "ebi_reg.h"
|
||
|
|
#include "usbd_reg.h"
|
||
|
|
#include "hsusbd_reg.h"
|
||
|
|
#include "usbh_reg.h"
|
||
|
|
#include "hsusbh_reg.h"
|
||
|
|
#include "otg_reg.h"
|
||
|
|
#include "hsotg_reg.h"
|
||
|
|
#include "crc_reg.h"
|
||
|
|
#include "crypto_reg.h"
|
||
|
|
#include "trng_reg.h"
|
||
|
|
#include "eadc_reg.h"
|
||
|
|
#include "dac_reg.h"
|
||
|
|
#include "acmp_reg.h"
|
||
|
|
#include "opa_reg.h"
|
||
|
|
#include "ccap_reg.h"
|
||
|
|
|
||
|
|
|
||
|
|
/** @addtogroup PERIPHERAL_MEM_MAP Peripheral Memory Base
|
||
|
|
Memory Mapped Structure for Peripherals
|
||
|
|
@{
|
||
|
|
*/
|
||
|
|
/* Peripheral and SRAM base address */
|
||
|
|
#define FLASH_BASE ((uint32_t)0x00000000) /*!< Flash base address */
|
||
|
|
#define SRAM_BASE ((uint32_t)0x20000000) /*!< SRAM Base Address */
|
||
|
|
#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral Base Address */
|
||
|
|
#define AHBPERIPH_BASE PERIPH_BASE /*!< AHB Base Address */
|
||
|
|
#define APBPERIPH_BASE (PERIPH_BASE + (uint32_t)0x00040000) /*!< APB Base Address */
|
||
|
|
|
||
|
|
/*!< AHB peripherals */
|
||
|
|
#define SYS_BASE (AHBPERIPH_BASE + 0x00000UL)
|
||
|
|
#define CLK_BASE (AHBPERIPH_BASE + 0x00200UL)
|
||
|
|
#define NMI_BASE (AHBPERIPH_BASE + 0x00300UL)
|
||
|
|
#define GPIOA_BASE (AHBPERIPH_BASE + 0x04000UL)
|
||
|
|
#define GPIOB_BASE (AHBPERIPH_BASE + 0x04040UL)
|
||
|
|
#define GPIOC_BASE (AHBPERIPH_BASE + 0x04080UL)
|
||
|
|
#define GPIOD_BASE (AHBPERIPH_BASE + 0x040C0UL)
|
||
|
|
#define GPIOE_BASE (AHBPERIPH_BASE + 0x04100UL)
|
||
|
|
#define GPIOF_BASE (AHBPERIPH_BASE + 0x04140UL)
|
||
|
|
#define GPIOG_BASE (AHBPERIPH_BASE + 0x04180UL)
|
||
|
|
#define GPIOH_BASE (AHBPERIPH_BASE + 0x041C0UL)
|
||
|
|
#define GPIOI_BASE (AHBPERIPH_BASE + 0x04200UL)
|
||
|
|
#define GPIO_DBCTL_BASE (AHBPERIPH_BASE + 0x04440UL)
|
||
|
|
#define GPIO_PIN_DATA_BASE (AHBPERIPH_BASE + 0x04800UL)
|
||
|
|
#define PDMA_BASE (AHBPERIPH_BASE + 0x08000UL)
|
||
|
|
#define USBH_BASE (AHBPERIPH_BASE + 0x09000UL)
|
||
|
|
#define HSUSBH_BASE (AHBPERIPH_BASE + 0x1A000UL)
|
||
|
|
#define EMAC_BASE (AHBPERIPH_BASE + 0x0B000UL)
|
||
|
|
#define FMC_BASE (AHBPERIPH_BASE + 0x0C000UL)
|
||
|
|
#define SDH0_BASE (AHBPERIPH_BASE + 0x0D000UL)
|
||
|
|
#define SDH1_BASE (AHBPERIPH_BASE + 0x0E000UL)
|
||
|
|
#define EBI_BASE (AHBPERIPH_BASE + 0x10000UL)
|
||
|
|
#define HSUSBD_BASE (AHBPERIPH_BASE + 0x19000UL)
|
||
|
|
#define CCAP_BASE (AHBPERIPH_BASE + 0x30000UL)
|
||
|
|
#define CRC_BASE (AHBPERIPH_BASE + 0x31000UL)
|
||
|
|
#define TAMPER_BASE (AHBPERIPH_BASE + 0xE1000UL)
|
||
|
|
|
||
|
|
/*!< APB2 peripherals */
|
||
|
|
#define WDT_BASE (APBPERIPH_BASE + 0x00000UL)
|
||
|
|
#define WWDT_BASE (APBPERIPH_BASE + 0x00100UL)
|
||
|
|
#define OPA_BASE (APBPERIPH_BASE + 0x06000UL)
|
||
|
|
#define I2S_BASE (APBPERIPH_BASE + 0x08000UL)
|
||
|
|
#define EADC1_BASE (APBPERIPH_BASE + 0x0B000UL)
|
||
|
|
#define TIMER0_BASE (APBPERIPH_BASE + 0x10000UL)
|
||
|
|
#define TIMER1_BASE (APBPERIPH_BASE + 0x10100UL)
|
||
|
|
#define EPWM0_BASE (APBPERIPH_BASE + 0x18000UL)
|
||
|
|
#define BPWM0_BASE (APBPERIPH_BASE + 0x1A000UL)
|
||
|
|
#define QSPI0_BASE (APBPERIPH_BASE + 0x20000UL)
|
||
|
|
#define SPI1_BASE (APBPERIPH_BASE + 0x22000UL)
|
||
|
|
#define SPI3_BASE (APBPERIPH_BASE + 0x24000UL)
|
||
|
|
#define UART0_BASE (APBPERIPH_BASE + 0x30000UL)
|
||
|
|
#define UART2_BASE (APBPERIPH_BASE + 0x32000UL)
|
||
|
|
#define UART4_BASE (APBPERIPH_BASE + 0x34000UL)
|
||
|
|
#define UART6_BASE (APBPERIPH_BASE + 0x36000UL)
|
||
|
|
#define I2C0_BASE (APBPERIPH_BASE + 0x40000UL)
|
||
|
|
#define I2C2_BASE (APBPERIPH_BASE + 0x42000UL)
|
||
|
|
#define CAN0_BASE (APBPERIPH_BASE + 0x60000UL)
|
||
|
|
#define CAN2_BASE (APBPERIPH_BASE + 0x62000UL)
|
||
|
|
#define QEI0_BASE (APBPERIPH_BASE + 0x70000UL)
|
||
|
|
#define ECAP0_BASE (APBPERIPH_BASE + 0x74000UL)
|
||
|
|
#define USCI0_BASE (APBPERIPH_BASE + 0x90000UL)
|
||
|
|
|
||
|
|
|
||
|
|
/*!< APB1 peripherals */
|
||
|
|
#define RTC_BASE (APBPERIPH_BASE + 0x01000UL)
|
||
|
|
#define EADC_BASE (APBPERIPH_BASE + 0x03000UL)
|
||
|
|
#define ACMP01_BASE (APBPERIPH_BASE + 0x05000UL)
|
||
|
|
#define USBD_BASE (APBPERIPH_BASE + 0x80000UL)
|
||
|
|
#define OTG_BASE (APBPERIPH_BASE + 0x0D000UL)
|
||
|
|
#define HSOTG_BASE (APBPERIPH_BASE + 0x0F000UL)
|
||
|
|
#define TIMER2_BASE (APBPERIPH_BASE + 0x11000UL)
|
||
|
|
#define TIMER3_BASE (APBPERIPH_BASE + 0x11100UL)
|
||
|
|
#define EPWM1_BASE (APBPERIPH_BASE + 0x19000UL)
|
||
|
|
#define BPWM1_BASE (APBPERIPH_BASE + 0x1B000UL)
|
||
|
|
#define SPI0_BASE (APBPERIPH_BASE + 0x21000UL)
|
||
|
|
#define SPI2_BASE (APBPERIPH_BASE + 0x23000UL)
|
||
|
|
#define QSPI1_BASE (APBPERIPH_BASE + 0x29000UL)
|
||
|
|
#define UART1_BASE (APBPERIPH_BASE + 0x31000UL)
|
||
|
|
#define UART3_BASE (APBPERIPH_BASE + 0x33000UL)
|
||
|
|
#define UART5_BASE (APBPERIPH_BASE + 0x35000UL)
|
||
|
|
#define UART7_BASE (APBPERIPH_BASE + 0x37000UL)
|
||
|
|
#define I2C1_BASE (APBPERIPH_BASE + 0x41000UL)
|
||
|
|
#define CAN1_BASE (APBPERIPH_BASE + 0x61000UL)
|
||
|
|
#define QEI1_BASE (APBPERIPH_BASE + 0x71000UL)
|
||
|
|
#define ECAP1_BASE (APBPERIPH_BASE + 0x75000UL)
|
||
|
|
#define TRNG_BASE (APBPERIPH_BASE + 0x79000UL)
|
||
|
|
#define USCI1_BASE (APBPERIPH_BASE + 0x91000UL)
|
||
|
|
#define CRPT_BASE (0x50080000UL)
|
||
|
|
#define SPIM_BASE (0x40007000UL)
|
||
|
|
|
||
|
|
#define SC0_BASE (APBPERIPH_BASE + 0x50000UL)
|
||
|
|
#define SC1_BASE (APBPERIPH_BASE + 0x51000UL)
|
||
|
|
#define SC2_BASE (APBPERIPH_BASE + 0x52000UL)
|
||
|
|
#define DAC0_BASE (APBPERIPH_BASE + 0x07000UL)
|
||
|
|
#define DAC1_BASE (APBPERIPH_BASE + 0x07040UL)
|
||
|
|
#define DACDBG_BASE (APBPERIPH_BASE + 0x07FECUL)
|
||
|
|
#define OPA0_BASE (APBPERIPH_BASE + 0x06000UL)
|
||
|
|
|
||
|
|
/*@}*/ /* end of group PERIPHERAL_MEM_MAP */
|
||
|
|
|
||
|
|
|
||
|
|
/** @addtogroup PERIPHERAL_DECLARATION Peripheral Pointer
|
||
|
|
The Declaration of Peripherals
|
||
|
|
@{
|
||
|
|
*/
|
||
|
|
|
||
|
|
#define SYS ((SYS_T *) SYS_BASE)
|
||
|
|
#define CLK ((CLK_T *) CLK_BASE)
|
||
|
|
#define NMI ((NMI_T *) NMI_BASE)
|
||
|
|
#define PA ((GPIO_T *) GPIOA_BASE)
|
||
|
|
#define PB ((GPIO_T *) GPIOB_BASE)
|
||
|
|
#define PC ((GPIO_T *) GPIOC_BASE)
|
||
|
|
#define PD ((GPIO_T *) GPIOD_BASE)
|
||
|
|
#define PE ((GPIO_T *) GPIOE_BASE)
|
||
|
|
#define PF ((GPIO_T *) GPIOF_BASE)
|
||
|
|
#define PG ((GPIO_T *) GPIOG_BASE)
|
||
|
|
#define PH ((GPIO_T *) GPIOH_BASE)
|
||
|
|
#define GPA ((GPIO_T *) GPIOA_BASE)
|
||
|
|
#define GPB ((GPIO_T *) GPIOB_BASE)
|
||
|
|
#define GPC ((GPIO_T *) GPIOC_BASE)
|
||
|
|
#define GPD ((GPIO_T *) GPIOD_BASE)
|
||
|
|
#define GPE ((GPIO_T *) GPIOE_BASE)
|
||
|
|
#define GPF ((GPIO_T *) GPIOF_BASE)
|
||
|
|
#define GPG ((GPIO_T *) GPIOG_BASE)
|
||
|
|
#define GPH ((GPIO_T *) GPIOH_BASE)
|
||
|
|
#define GPIO ((GPIO_DBCTL_T *) GPIO_DBCTL_BASE)
|
||
|
|
#define PDMA ((PDMA_T *) PDMA_BASE)
|
||
|
|
#define USBH ((USBH_T *) USBH_BASE)
|
||
|
|
#define HSUSBH ((HSUSBH_T *) HSUSBH_BASE)
|
||
|
|
#define EMAC ((EMAC_T *) EMAC_BASE)
|
||
|
|
#define FMC ((FMC_T *) FMC_BASE)
|
||
|
|
#define SDH0 ((SDH_T *) SDH0_BASE)
|
||
|
|
#define SDH1 ((SDH_T *) SDH1_BASE)
|
||
|
|
#define EBI ((EBI_T *) EBI_BASE)
|
||
|
|
#define CRC ((CRC_T *) CRC_BASE)
|
||
|
|
#define TAMPER ((TAMPER_T *) TAMPER_BASE)
|
||
|
|
|
||
|
|
#define WDT ((WDT_T *) WDT_BASE)
|
||
|
|
#define WWDT ((WWDT_T *) WWDT_BASE)
|
||
|
|
#define RTC ((RTC_T *) RTC_BASE)
|
||
|
|
#define EADC ((EADC_T *) EADC_BASE)
|
||
|
|
#define EADC0 ((EADC_T *) EADC_BASE)
|
||
|
|
#define EADC1 ((EADC_T *) EADC1_BASE)
|
||
|
|
#define ACMP01 ((ACMP_T *) ACMP01_BASE)
|
||
|
|
|
||
|
|
#define I2S0 ((I2S_T *) I2S_BASE)
|
||
|
|
#define USBD ((USBD_T *) USBD_BASE)
|
||
|
|
#define OTG ((OTG_T *) OTG_BASE)
|
||
|
|
#define HSUSBD ((HSUSBD_T *)HSUSBD_BASE)
|
||
|
|
#define HSOTG ((HSOTG_T *) HSOTG_BASE)
|
||
|
|
#define TIMER0 ((TIMER_T *) TIMER0_BASE)
|
||
|
|
#define TIMER1 ((TIMER_T *) TIMER1_BASE)
|
||
|
|
#define TIMER2 ((TIMER_T *) TIMER2_BASE)
|
||
|
|
#define TIMER3 ((TIMER_T *) TIMER3_BASE)
|
||
|
|
#define EPWM0 ((EPWM_T *) EPWM0_BASE)
|
||
|
|
#define EPWM1 ((EPWM_T *) EPWM1_BASE)
|
||
|
|
#define BPWM0 ((BPWM_T *) BPWM0_BASE)
|
||
|
|
#define BPWM1 ((BPWM_T *) BPWM1_BASE)
|
||
|
|
#define ECAP0 ((ECAP_T *) ECAP0_BASE)
|
||
|
|
#define ECAP1 ((ECAP_T *) ECAP1_BASE)
|
||
|
|
#define QEI0 ((QEI_T *) QEI0_BASE)
|
||
|
|
#define QEI1 ((QEI_T *) QEI1_BASE)
|
||
|
|
#define QSPI0 ((QSPI_T *) QSPI0_BASE)
|
||
|
|
#define QSPI1 ((QSPI_T *) QSPI1_BASE)
|
||
|
|
#define SPI0 ((SPI_T *) SPI0_BASE)
|
||
|
|
#define SPI1 ((SPI_T *) SPI1_BASE)
|
||
|
|
#define SPI2 ((SPI_T *) SPI2_BASE)
|
||
|
|
#define SPI3 ((SPI_T *) SPI3_BASE)
|
||
|
|
#define UART0 ((UART_T *) UART0_BASE)
|
||
|
|
#define UART1 ((UART_T *) UART1_BASE)
|
||
|
|
#define UART2 ((UART_T *) UART2_BASE)
|
||
|
|
#define UART3 ((UART_T *) UART3_BASE)
|
||
|
|
#define UART4 ((UART_T *) UART4_BASE)
|
||
|
|
#define UART5 ((UART_T *) UART5_BASE)
|
||
|
|
#define UART6 ((UART_T *) UART6_BASE)
|
||
|
|
#define UART7 ((UART_T *) UART7_BASE)
|
||
|
|
#define I2C0 ((I2C_T *) I2C0_BASE)
|
||
|
|
#define I2C1 ((I2C_T *) I2C1_BASE)
|
||
|
|
#define I2C2 ((I2C_T *) I2C2_BASE)
|
||
|
|
#define SC0 ((SC_T *) SC0_BASE)
|
||
|
|
#define SC1 ((SC_T *) SC1_BASE)
|
||
|
|
#define SC2 ((SC_T *) SC2_BASE)
|
||
|
|
#define CAN0 ((CAN_T *) CAN0_BASE)
|
||
|
|
#define CAN1 ((CAN_T *) CAN1_BASE)
|
||
|
|
#define CAN2 ((CAN_T *) CAN2_BASE)
|
||
|
|
#define CRPT ((CRPT_T *) CRPT_BASE)
|
||
|
|
#define TRNG ((TRNG_T *) TRNG_BASE)
|
||
|
|
#define SPIM ((volatile SPIM_T *) SPIM_BASE)
|
||
|
|
#define DAC0 ((DAC_T *) DAC0_BASE)
|
||
|
|
#define DAC1 ((DAC_T *) DAC1_BASE)
|
||
|
|
#define USPI0 ((USPI_T *) USCI0_BASE) /*!< USPI0 Configuration Struct */
|
||
|
|
#define USPI1 ((USPI_T *) USCI1_BASE) /*!< USPI1 Configuration Struct */
|
||
|
|
#define OPA ((OPA_T *) OPA_BASE)
|
||
|
|
#define UI2C0 ((UI2C_T *) USCI0_BASE) /*!< UI2C0 Configuration Struct */
|
||
|
|
#define UI2C1 ((UI2C_T *) USCI1_BASE) /*!< UI2C1 Configuration Struct */
|
||
|
|
#define UUART0 ((UUART_T *) USCI0_BASE) /*!< UUART0 Configuration Struct */
|
||
|
|
#define UUART1 ((UUART_T *) USCI1_BASE) /*!< UUART1 Configuration Struct */
|
||
|
|
#define CCAP ((CCAP_T *) CCAP_BASE)
|
||
|
|
|
||
|
|
/*@}*/ /* end of group ERIPHERAL_DECLARATION */
|
||
|
|
|
||
|
|
/** @addtogroup IO_ROUTINE I/O Routines
|
||
|
|
The Declaration of I/O Routines
|
||
|
|
@{
|
||
|
|
*/
|
||
|
|
|
||
|
|
typedef volatile unsigned char vu8; ///< Define 8-bit unsigned volatile data type
|
||
|
|
typedef volatile unsigned short vu16; ///< Define 16-bit unsigned volatile data type
|
||
|
|
typedef volatile unsigned long vu32; ///< Define 32-bit unsigned volatile data type
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Get a 8-bit unsigned value from specified address
|
||
|
|
* @param[in] addr Address to get 8-bit data from
|
||
|
|
* @return 8-bit unsigned value stored in specified address
|
||
|
|
*/
|
||
|
|
#define M8(addr) (*((vu8 *) (addr)))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Get a 16-bit unsigned value from specified address
|
||
|
|
* @param[in] addr Address to get 16-bit data from
|
||
|
|
* @return 16-bit unsigned value stored in specified address
|
||
|
|
* @note The input address must be 16-bit aligned
|
||
|
|
*/
|
||
|
|
#define M16(addr) (*((vu16 *) (addr)))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Get a 32-bit unsigned value from specified address
|
||
|
|
* @param[in] addr Address to get 32-bit data from
|
||
|
|
* @return 32-bit unsigned value stored in specified address
|
||
|
|
* @note The input address must be 32-bit aligned
|
||
|
|
*/
|
||
|
|
#define M32(addr) (*((vu32 *) (addr)))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Set a 32-bit unsigned value to specified I/O port
|
||
|
|
* @param[in] port Port address to set 32-bit data
|
||
|
|
* @param[in] value Value to write to I/O port
|
||
|
|
* @return None
|
||
|
|
* @note The output port must be 32-bit aligned
|
||
|
|
*/
|
||
|
|
#define outpw(port,value) *((volatile unsigned int *)(port)) = (value)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Get a 32-bit unsigned value from specified I/O port
|
||
|
|
* @param[in] port Port address to get 32-bit data from
|
||
|
|
* @return 32-bit unsigned value stored in specified I/O port
|
||
|
|
* @note The input port must be 32-bit aligned
|
||
|
|
*/
|
||
|
|
#define inpw(port) (*((volatile unsigned int *)(port)))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Set a 16-bit unsigned value to specified I/O port
|
||
|
|
* @param[in] port Port address to set 16-bit data
|
||
|
|
* @param[in] value Value to write to I/O port
|
||
|
|
* @return None
|
||
|
|
* @note The output port must be 16-bit aligned
|
||
|
|
*/
|
||
|
|
#define outps(port,value) *((volatile unsigned short *)(port)) = (value)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Get a 16-bit unsigned value from specified I/O port
|
||
|
|
* @param[in] port Port address to get 16-bit data from
|
||
|
|
* @return 16-bit unsigned value stored in specified I/O port
|
||
|
|
* @note The input port must be 16-bit aligned
|
||
|
|
*/
|
||
|
|
#define inps(port) (*((volatile unsigned short *)(port)))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Set a 8-bit unsigned value to specified I/O port
|
||
|
|
* @param[in] port Port address to set 8-bit data
|
||
|
|
* @param[in] value Value to write to I/O port
|
||
|
|
* @return None
|
||
|
|
*/
|
||
|
|
#define outpb(port,value) *((volatile unsigned char *)(port)) = (value)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Get a 8-bit unsigned value from specified I/O port
|
||
|
|
* @param[in] port Port address to get 8-bit data from
|
||
|
|
* @return 8-bit unsigned value stored in specified I/O port
|
||
|
|
*/
|
||
|
|
#define inpb(port) (*((volatile unsigned char *)(port)))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Set a 32-bit unsigned value to specified I/O port
|
||
|
|
* @param[in] port Port address to set 32-bit data
|
||
|
|
* @param[in] value Value to write to I/O port
|
||
|
|
* @return None
|
||
|
|
* @note The output port must be 32-bit aligned
|
||
|
|
*/
|
||
|
|
#define outp32(port,value) *((volatile unsigned int *)(port)) = (value)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Get a 32-bit unsigned value from specified I/O port
|
||
|
|
* @param[in] port Port address to get 32-bit data from
|
||
|
|
* @return 32-bit unsigned value stored in specified I/O port
|
||
|
|
* @note The input port must be 32-bit aligned
|
||
|
|
*/
|
||
|
|
#define inp32(port) (*((volatile unsigned int *)(port)))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Set a 16-bit unsigned value to specified I/O port
|
||
|
|
* @param[in] port Port address to set 16-bit data
|
||
|
|
* @param[in] value Value to write to I/O port
|
||
|
|
* @return None
|
||
|
|
* @note The output port must be 16-bit aligned
|
||
|
|
*/
|
||
|
|
#define outp16(port,value) *((volatile unsigned short *)(port)) = (value)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Get a 16-bit unsigned value from specified I/O port
|
||
|
|
* @param[in] port Port address to get 16-bit data from
|
||
|
|
* @return 16-bit unsigned value stored in specified I/O port
|
||
|
|
* @note The input port must be 16-bit aligned
|
||
|
|
*/
|
||
|
|
#define inp16(port) (*((volatile unsigned short *)(port)))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Set a 8-bit unsigned value to specified I/O port
|
||
|
|
* @param[in] port Port address to set 8-bit data
|
||
|
|
* @param[in] value Value to write to I/O port
|
||
|
|
* @return None
|
||
|
|
*/
|
||
|
|
#define outp8(port,value) *((volatile unsigned char *)(port)) = (value)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Get a 8-bit unsigned value from specified I/O port
|
||
|
|
* @param[in] port Port address to get 8-bit data from
|
||
|
|
* @return 8-bit unsigned value stored in specified I/O port
|
||
|
|
*/
|
||
|
|
#define inp8(port) (*((volatile unsigned char *)(port)))
|
||
|
|
|
||
|
|
|
||
|
|
/*@}*/ /* end of group IO_ROUTINE */
|
||
|
|
|
||
|
|
/******************************************************************************/
|
||
|
|
/* Legacy Constants */
|
||
|
|
/******************************************************************************/
|
||
|
|
/** @addtogroup Legacy_Constants Legacy Constants
|
||
|
|
Legacy Constants
|
||
|
|
@{
|
||
|
|
*/
|
||
|
|
|
||
|
|
#ifndef NULL
|
||
|
|
#define NULL (0) ///< NULL pointer
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#define TRUE (1UL) ///< Boolean true, define to use in API parameters or return value
|
||
|
|
#define FALSE (0UL) ///< Boolean false, define to use in API parameters or return value
|
||
|
|
|
||
|
|
#define ENABLE (1UL) ///< Enable, define to use in API parameters
|
||
|
|
#define DISABLE (0UL) ///< Disable, define to use in API parameters
|
||
|
|
|
||
|
|
/* Define one bit mask */
|
||
|
|
#define BIT0 (0x00000001UL) ///< Bit 0 mask of an 32 bit integer
|
||
|
|
#define BIT1 (0x00000002UL) ///< Bit 1 mask of an 32 bit integer
|
||
|
|
#define BIT2 (0x00000004UL) ///< Bit 2 mask of an 32 bit integer
|
||
|
|
#define BIT3 (0x00000008UL) ///< Bit 3 mask of an 32 bit integer
|
||
|
|
#define BIT4 (0x00000010UL) ///< Bit 4 mask of an 32 bit integer
|
||
|
|
#define BIT5 (0x00000020UL) ///< Bit 5 mask of an 32 bit integer
|
||
|
|
#define BIT6 (0x00000040UL) ///< Bit 6 mask of an 32 bit integer
|
||
|
|
#define BIT7 (0x00000080UL) ///< Bit 7 mask of an 32 bit integer
|
||
|
|
#define BIT8 (0x00000100UL) ///< Bit 8 mask of an 32 bit integer
|
||
|
|
#define BIT9 (0x00000200UL) ///< Bit 9 mask of an 32 bit integer
|
||
|
|
#define BIT10 (0x00000400UL) ///< Bit 10 mask of an 32 bit integer
|
||
|
|
#define BIT11 (0x00000800UL) ///< Bit 11 mask of an 32 bit integer
|
||
|
|
#define BIT12 (0x00001000UL) ///< Bit 12 mask of an 32 bit integer
|
||
|
|
#define BIT13 (0x00002000UL) ///< Bit 13 mask of an 32 bit integer
|
||
|
|
#define BIT14 (0x00004000UL) ///< Bit 14 mask of an 32 bit integer
|
||
|
|
#define BIT15 (0x00008000UL) ///< Bit 15 mask of an 32 bit integer
|
||
|
|
#define BIT16 (0x00010000UL) ///< Bit 16 mask of an 32 bit integer
|
||
|
|
#define BIT17 (0x00020000UL) ///< Bit 17 mask of an 32 bit integer
|
||
|
|
#define BIT18 (0x00040000UL) ///< Bit 18 mask of an 32 bit integer
|
||
|
|
#define BIT19 (0x00080000UL) ///< Bit 19 mask of an 32 bit integer
|
||
|
|
#define BIT20 (0x00100000UL) ///< Bit 20 mask of an 32 bit integer
|
||
|
|
#define BIT21 (0x00200000UL) ///< Bit 21 mask of an 32 bit integer
|
||
|
|
#define BIT22 (0x00400000UL) ///< Bit 22 mask of an 32 bit integer
|
||
|
|
#define BIT23 (0x00800000UL) ///< Bit 23 mask of an 32 bit integer
|
||
|
|
#define BIT24 (0x01000000UL) ///< Bit 24 mask of an 32 bit integer
|
||
|
|
#define BIT25 (0x02000000UL) ///< Bit 25 mask of an 32 bit integer
|
||
|
|
#define BIT26 (0x04000000UL) ///< Bit 26 mask of an 32 bit integer
|
||
|
|
#define BIT27 (0x08000000UL) ///< Bit 27 mask of an 32 bit integer
|
||
|
|
#define BIT28 (0x10000000UL) ///< Bit 28 mask of an 32 bit integer
|
||
|
|
#define BIT29 (0x20000000UL) ///< Bit 29 mask of an 32 bit integer
|
||
|
|
#define BIT30 (0x40000000UL) ///< Bit 30 mask of an 32 bit integer
|
||
|
|
#define BIT31 (0x80000000UL) ///< Bit 31 mask of an 32 bit integer
|
||
|
|
|
||
|
|
/* Byte Mask Definitions */
|
||
|
|
#define BYTE0_Msk (0x000000FFUL) ///< Mask to get bit0~bit7 from a 32 bit integer
|
||
|
|
#define BYTE1_Msk (0x0000FF00UL) ///< Mask to get bit8~bit15 from a 32 bit integer
|
||
|
|
#define BYTE2_Msk (0x00FF0000UL) ///< Mask to get bit16~bit23 from a 32 bit integer
|
||
|
|
#define BYTE3_Msk (0xFF000000UL) ///< Mask to get bit24~bit31 from a 32 bit integer
|
||
|
|
|
||
|
|
#define GET_BYTE0(u32Param) (((u32Param) & BYTE0_Msk) ) /*!< Extract Byte 0 (Bit 0~ 7) from parameter u32Param */
|
||
|
|
#define GET_BYTE1(u32Param) (((u32Param) & BYTE1_Msk) >> 8) /*!< Extract Byte 1 (Bit 8~15) from parameter u32Param */
|
||
|
|
#define GET_BYTE2(u32Param) (((u32Param) & BYTE2_Msk) >> 16) /*!< Extract Byte 2 (Bit 16~23) from parameter u32Param */
|
||
|
|
#define GET_BYTE3(u32Param) (((u32Param) & BYTE3_Msk) >> 24) /*!< Extract Byte 3 (Bit 24~31) from parameter u32Param */
|
||
|
|
|
||
|
|
/*@}*/ /* end of group Legacy_Constants */
|
||
|
|
|
||
|
|
|
||
|
|
/******************************************************************************/
|
||
|
|
/* Peripheral header files */
|
||
|
|
/******************************************************************************/
|
||
|
|
#include "nu_sys.h"
|
||
|
|
#include "nu_clk.h"
|
||
|
|
|
||
|
|
#include "nu_acmp.h"
|
||
|
|
#include "nu_dac.h"
|
||
|
|
#include "nu_emac.h"
|
||
|
|
#include "nu_uart.h"
|
||
|
|
#include "nu_usci_spi.h"
|
||
|
|
#include "nu_gpio.h"
|
||
|
|
#include "nu_ccap.h"
|
||
|
|
#include "nu_ecap.h"
|
||
|
|
#include "nu_qei.h"
|
||
|
|
#include "nu_timer.h"
|
||
|
|
#include "nu_timer_pwm.h"
|
||
|
|
#include "nu_pdma.h"
|
||
|
|
#include "nu_crypto.h"
|
||
|
|
#include "nu_trng.h"
|
||
|
|
#include "nu_fmc.h"
|
||
|
|
#include "nu_spim.h"
|
||
|
|
#include "nu_i2c.h"
|
||
|
|
#include "nu_i2s.h"
|
||
|
|
#include "nu_epwm.h"
|
||
|
|
#include "nu_eadc.h"
|
||
|
|
#include "nu_bpwm.h"
|
||
|
|
#include "nu_wdt.h"
|
||
|
|
#include "nu_wwdt.h"
|
||
|
|
#include "nu_opa.h"
|
||
|
|
#include "nu_crc.h"
|
||
|
|
#include "nu_ebi.h"
|
||
|
|
#include "nu_usci_i2c.h"
|
||
|
|
#include "nu_scuart.h"
|
||
|
|
#include "nu_sc.h"
|
||
|
|
#include "nu_spi.h"
|
||
|
|
#include "nu_qspi.h"
|
||
|
|
#include "nu_can.h"
|
||
|
|
#include "nu_rtc.h"
|
||
|
|
#include "nu_usci_uart.h"
|
||
|
|
#include "nu_sdh.h"
|
||
|
|
#include "nu_usbd.h"
|
||
|
|
#include "nu_hsusbd.h"
|
||
|
|
#include "nu_otg.h"
|
||
|
|
#include "nu_hsotg.h"
|
||
|
|
|
||
|
|
|
||
|
|
#ifdef __cplusplus
|
||
|
|
}
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#endif /* __M480_H__ */
|
||
|
|
|