rt-thread/bsp/n32g452xx/n32g452xx-mini-system/board/Kconfig

menu "Hardware Drivers Config"

config SOC_N32G452XX
    bool
    select SOC_SERIES_N32G452XX
    select RT_USING_COMPONENTS_INIT
    select RT_USING_USER_MAIN
    default y

menu "Onboard Peripheral Drivers"

    config RT_USING_SERIAL
        bool "Enable USART (uart1)"
        select BSP_USING_UART
        select BSP_USING_UART1
        default y

endmenu

menu "On-chip Peripheral Drivers"

    config RT_USING_GPIO
        bool "Enable GPIO"
        select RT_USING_PIN
        default y

    config BSP_USING_ON_CHIP_FLASH
        bool "Enable on-chip FLASH"
        default n 

    menuconfig BSP_USING_UART
        bool "Enable UART"
        default y
        select RT_USING_SERIAL
        if BSP_USING_UART
            config BSP_USING_UART1
                bool "Enable UART1"
                default y

            config BSP_USING_UART2
                bool "Enable UART2"
                default n

            config BSP_USING_UART3
                bool "Enable UART3"
                default n
        endif

    menuconfig BSP_USING_PWM
        bool "Enable PWM"
        default n
        select RT_USING_PWM
        if BSP_USING_PWM
        menuconfig BSP_USING_TIM3
            bool "Enable timer3 output PWM"
            default n
            if BSP_USING_TIM3
                config BSP_USING_TIM3_CH1
                    bool "Enable TIM3 channel1 PWM"
                    default n
                config BSP_USING_TIM3_CH2
                    bool "Enable TIM3 channel2 PWM"
                    default n
                config BSP_USING_TIM3_CH3
                    bool "Enable TIM3 channel3 PWM"
                    default n
                config BSP_USING_TIM3_CH4
                    bool "Enable TIM3 channel4 PWM"
                    default n
            endif
        endif

    menuconfig BSP_USING_HWTIMER
        bool "Enable HWTIMER"
        default n
        select RT_USING_HWTIMER
        if BSP_USING_HWTIMER
        config BSP_USING_HWTIM3
            bool "Enable hardware timer3"
            default n
        config BSP_USING_HWTIM4
            bool "Enable hardware timer4"
            default n
        config BSP_USING_HWTIM5
            bool "Enable hardware timer5"
            default n
        config BSP_USING_HWTIM6
            bool "Enable hardware timer6"
            default n
        config BSP_USING_HWTIM7
            bool "Enable hardware timer7"
            default n
        endif

    menuconfig BSP_USING_SPI
        bool "Enable SPI BUS"
        default n
        select RT_USING_SPI
        if BSP_USING_SPI
            config BSP_USING_SPI1
                bool "Enable SPI1 BUS"
                default n

            config BSP_USING_SPI2
                bool "Enable SPI2 BUS"
                default n
        endif

    menuconfig BSP_USING_I2C1
        bool "Enable I2C1 BUS (software simulation)"
        default n
        select RT_USING_I2C
        select RT_USING_I2C_BITOPS
        select RT_USING_PIN
        if BSP_USING_I2C1
            config BSP_I2C1_SCL_PIN
                int "i2c1 scl pin number"
                range 0 63
                default 22
            config BSP_I2C1_SDA_PIN
                int "I2C1 sda pin number"
                range 0 63
                default 23
        endif

    menuconfig BSP_USING_ADC
        bool "Enable ADC"
        default n
        select RT_USING_ADC
        if BSP_USING_ADC
            config BSP_USING_ADC1
                bool "Enable ADC1"
                default n
            config BSP_USING_ADC2
                bool "Enable ADC2"
                default n
        endif

    menuconfig BSP_USING_CAN
        bool "Enable CAN"
        default n
        select RT_USING_CAN
        if BSP_USING_CAN
            config BSP_USING_CAN1
                bool "using CAN1"
                default n
            config BSP_USING_CAN2
                bool "using CAN2"
                default n
        endif

    menuconfig BSP_USING_SDIO
        bool "Enable SDIO"
        default n
        select RT_USING_SDIO
        if BSP_USING_SDIO
            config BSP_USING_SDIO1
                bool "Enable SDIO1"
                default n
        endif
endmenu

endmenu
添加 N32G452 最小系统 BSP 源码 (#4959) [add] N32G452 BSP 2021-09-09 20:31:17 +08:00			`menu "Hardware Drivers Config"`

			`config SOC_N32G452XX`
			`bool`
解决无法dist问题 (#5150) * first commit, keil test pass * feat : n32g452xx direct structure base at32 1. 重新整理目录结构 * feat : 基于AT32,将各驱动移植整改待验证 1. 部分驱动已经整改,但未验证 2. 根据AT32整改目录结构 * feat : add README document 1. 完善配置文件 2. 添加说明文档 * feat : 验证添加的驱动 1. UART 1-3 验证通过 2. ADC 1-2 CH 6-9 验证通过 3. TIM 6-7 验证通过 * feat : complete readme document * feat : format code 1. ref https://github.com/mysterywolf/formatting * feat : 完成PWM驱动移植与自测 1. 添加PWM测试代码 2. 修正PWM驱动周期与脉冲错误问题 * feat : 删除多余代码与多余的文件,修正注释与函数命名 * feat : fix tim channel comment * feat : 完成DEMO测试例子 1. 完成MAIN函数中的LED测试例子 2. 完善README文档 3. 更新添加许可文件 * feat : 根据BSP提交自查完善固件 1. 添加.ignore_format.yml文件 2. 修正main.c的注释 * feat : add last line in .ignore_format.yml * feat : delet file_path in .ignore_format.yml * fix: gPIO/ADC driver 1. add ADC temperature&vref channel. 2.add GPIO IPD/OD configration * fix: 解决告警 1. 解决告警(rt_drv_pwm.c: warning: implicit declaration of function 'atoi') * feat: add scons --dist function * fix: 解决MDK5无法编译问题 * perf: delete invalid code Co-authored-by: linyuanbo_breo_server <linyuanbo@breo.com.cn> 2021-10-12 14:35:01 +08:00			`select SOC_SERIES_N32G452XX`
添加 N32G452 最小系统 BSP 源码 (#4959) [add] N32G452 BSP 2021-09-09 20:31:17 +08:00			`select RT_USING_COMPONENTS_INIT`
			`select RT_USING_USER_MAIN`
			`default y`

			`menu "Onboard Peripheral Drivers"`

			`config RT_USING_SERIAL`
			`bool "Enable USART (uart1)"`
			`select BSP_USING_UART`
			`select BSP_USING_UART1`
			`default y`

			`endmenu`

			`menu "On-chip Peripheral Drivers"`

			`config RT_USING_GPIO`
			`bool "Enable GPIO"`
			`select RT_USING_PIN`
			`default y`

			`config BSP_USING_ON_CHIP_FLASH`
			`bool "Enable on-chip FLASH"`
			`default n`

			`menuconfig BSP_USING_UART`
			`bool "Enable UART"`
			`default y`
			`select RT_USING_SERIAL`
			`if BSP_USING_UART`
			`config BSP_USING_UART1`
			`bool "Enable UART1"`
			`default y`

			`config BSP_USING_UART2`
			`bool "Enable UART2"`
			`default n`

			`config BSP_USING_UART3`
			`bool "Enable UART3"`
			`default n`
			`endif`

			`menuconfig BSP_USING_PWM`
			`bool "Enable PWM"`
			`default n`
			`select RT_USING_PWM`
			`if BSP_USING_PWM`
			`menuconfig BSP_USING_TIM3`
			`bool "Enable timer3 output PWM"`
			`default n`
			`if BSP_USING_TIM3`
			`config BSP_USING_TIM3_CH1`
			`bool "Enable TIM3 channel1 PWM"`
			`default n`
			`config BSP_USING_TIM3_CH2`
			`bool "Enable TIM3 channel2 PWM"`
			`default n`
			`config BSP_USING_TIM3_CH3`
			`bool "Enable TIM3 channel3 PWM"`
			`default n`
			`config BSP_USING_TIM3_CH4`
			`bool "Enable TIM3 channel4 PWM"`
			`default n`
			`endif`
			`endif`

			`menuconfig BSP_USING_HWTIMER`
			`bool "Enable HWTIMER"`
			`default n`
			`select RT_USING_HWTIMER`
			`if BSP_USING_HWTIMER`
			`config BSP_USING_HWTIM3`
			`bool "Enable hardware timer3"`
			`default n`
			`config BSP_USING_HWTIM4`
			`bool "Enable hardware timer4"`
			`default n`
			`config BSP_USING_HWTIM5`
			`bool "Enable hardware timer5"`
			`default n`
			`config BSP_USING_HWTIM6`
			`bool "Enable hardware timer6"`
			`default n`
			`config BSP_USING_HWTIM7`
			`bool "Enable hardware timer7"`
			`default n`
			`endif`

			`menuconfig BSP_USING_SPI`
			`bool "Enable SPI BUS"`
			`default n`
			`select RT_USING_SPI`
			`if BSP_USING_SPI`
			`config BSP_USING_SPI1`
			`bool "Enable SPI1 BUS"`
			`default n`

			`config BSP_USING_SPI2`
			`bool "Enable SPI2 BUS"`
			`default n`
			`endif`

			`menuconfig BSP_USING_I2C1`
			`bool "Enable I2C1 BUS (software simulation)"`
			`default n`
			`select RT_USING_I2C`
			`select RT_USING_I2C_BITOPS`
			`select RT_USING_PIN`
			`if BSP_USING_I2C1`
			`config BSP_I2C1_SCL_PIN`
			`int "i2c1 scl pin number"`
			`range 0 63`
			`default 22`
			`config BSP_I2C1_SDA_PIN`
			`int "I2C1 sda pin number"`
			`range 0 63`
			`default 23`
			`endif`

			`menuconfig BSP_USING_ADC`
			`bool "Enable ADC"`
			`default n`
			`select RT_USING_ADC`
			`if BSP_USING_ADC`
			`config BSP_USING_ADC1`
			`bool "Enable ADC1"`
			`default n`
			`config BSP_USING_ADC2`
			`bool "Enable ADC2"`
			`default n`
			`endif`

			`menuconfig BSP_USING_CAN`
			`bool "Enable CAN"`
			`default n`
			`select RT_USING_CAN`
			`if BSP_USING_CAN`
			`config BSP_USING_CAN1`
			`bool "using CAN1"`
			`default n`
			`config BSP_USING_CAN2`
			`bool "using CAN2"`
			`default n`
			`endif`

			`menuconfig BSP_USING_SDIO`
			`bool "Enable SDIO"`
			`default n`
			`select RT_USING_SDIO`
			`if BSP_USING_SDIO`
			`config BSP_USING_SDIO1`
			`bool "Enable SDIO1"`
			`default n`
			`endif`
			`endmenu`

			`endmenu`