rt-thread/bsp/lpc824/Libraries/peri_driver/pmu/pmu_8xx.h

/*
 * @brief LPC8xx PMU chip driver
 *
 * @note
 * Copyright(C) NXP Semiconductors, 2012
 * All rights reserved.
 *
 * @par
 * Software that is described herein is for illustrative purposes only
 * which provides customers with programming information regarding the
 * LPC products.  This software is supplied "AS IS" without any warranties of
 * any kind, and NXP Semiconductors and its licensor disclaim any and
 * all warranties, express or implied, including all implied warranties of
 * merchantability, fitness for a particular purpose and non-infringement of
 * intellectual property rights.  NXP Semiconductors assumes no responsibility
 * or liability for the use of the software, conveys no license or rights under any
 * patent, copyright, mask work right, or any other intellectual property rights in
 * or to any products. NXP Semiconductors reserves the right to make changes
 * in the software without notification. NXP Semiconductors also makes no
 * representation or warranty that such application will be suitable for the
 * specified use without further testing or modification.
 *
 * @par
 * Permission to use, copy, modify, and distribute this software and its
 * documentation is hereby granted, under NXP Semiconductors' and its
 * licensor's relevant copyrights in the software, without fee, provided that it
 * is used in conjunction with NXP Semiconductors microcontrollers.  This
 * copyright, permission, and disclaimer notice must appear in all copies of
 * this code.
 */

#ifndef __PMU_8XX_H_
#define __PMU_8XX_H_

#ifdef __cplusplus
extern "C" {
#endif

/** @defgroup PMU_8XX CHIP: LPC8xx PMU driver
 * @ingroup CHIP_8XX_Drivers
 * @{
 */

/**
 * @brief LPC8xx Power Management Unit register block structure
 */
typedef struct {
	__IO uint32_t PCON;		/*!< Offset: 0x000 Power control Register (R/W) */
	__IO uint32_t GPREG[4];	/*!< Offset: 0x004 General purpose Registers 0..3 (R/W) */
	__IO uint32_t DPDCTRL;	/*!< Offset: 0x014 Deep power-down control register (R/W) */
} LPC_PMU_T;

/* Reserved bits masks for registers */
#define PMU_PCON_RESERVED      ((0xf<<4)|(0x6<<8)|0xfffff000)
#define PMU_DPDCTRL_RESERVED   (~0xf)

/**
 * @brief LPC8xx low power mode type definitions
 */
typedef enum CHIP_PMU_MCUPOWER {
	PMU_MCU_SLEEP = 0,		/*!< Sleep mode */
	PMU_MCU_DEEP_SLEEP,		/*!< Deep Sleep mode */
	PMU_MCU_POWER_DOWN,		/*!< Power down mode */
	PMU_MCU_DEEP_PWRDOWN	/*!< Deep power down mode */
} CHIP_PMU_MCUPOWER_T;

/**
 * PMU PCON register bit fields & masks
 */
#define PMU_PCON_PM_SLEEP			(0x0)		/*!< ARM WFI enter sleep mode */
#define PMU_PCON_PM_DEEPSLEEP		(0x1)		/*!< ARM WFI enter Deep-sleep mode */
#define PMU_PCON_PM_POWERDOWN		(0x2)		/*!< ARM WFI enter Power-down mode */
#define PMU_PCON_PM_DEEPPOWERDOWN	(0x3)		/*!< ARM WFI enter Deep Power-down mode */
#define PMU_PCON_NODPD				(1 << 3)	/*!< Disable deep power-down mode */
#define PMU_PCON_SLEEPFLAG			(1 << 8)	/*!< Sleep mode flag */
#define PMU_PCON_DPDFLAG			(1 << 11)	/*!< Deep power-down flag */

/**
 * PMU DPDCTRL register bit fields & masks
 */
#define PMU_DPDCTRL_WAKEUPPHYS      (1 << 0)	/** Enable wake-up pin hysteresis */
#define PMU_DPDCTRL_WAKEPAD         (1 << 1)	/** Disable the Wake-up */
#define PMU_DPDCTRL_LPOSCEN         (1 << 2)	/** Enable the low-power oscillator (10 khz self wk) */
#define PMU_DPDCTRL_LPOSCDPDEN      (1 << 3)	/** Enable the low-power oscillator in deep power-down*/

/**
 * @brief	Write a value to a GPREG register
 * @param	pPMU		: Pointer to PMU register block
 * @param	regIndex	: Register index to write to, must be 0..3
 * @param	value		: Value to write
 * @return	None
 */
STATIC INLINE void Chip_PMU_WriteGPREG(LPC_PMU_T *pPMU, uint8_t regIndex, uint32_t value)
{
	pPMU->GPREG[regIndex] = value;
}

/**
 * @brief	Read a value to a GPREG register
 * @param	pPMU		: Pointer to PMU register block
 * @param	regIndex	: Register index to read from, must be 0..3
 * @return	Value read from the GPREG register
 */
STATIC INLINE uint32_t Chip_PMU_ReadGPREG(LPC_PMU_T *pPMU, uint8_t regIndex)
{
	return pPMU->GPREG[regIndex];
}

/**
 * @brief	Enter MCU Sleep mode
 * @param	pPMU	: Pointer to PMU register block
 * @return	None
 * @note	The sleep mode affects the ARM Cortex-M0+ core only. Peripherals
 * and memories are active. 
 */
void Chip_PMU_SleepState(LPC_PMU_T *pPMU);

/**
 * @brief	Enter MCU Deep Sleep mode
 * @param	pPMU	: Pointer to PMU register block
 * @return	None
 * @note	In Deep-sleep mode, the peripherals receive no internal clocks.
 * The flash is in stand-by mode. The SRAM memory and all peripheral registers
 * as well as the processor maintain their internal states. The WWDT, WKT,
 * and BOD can remain active to wake up the system on an interrupt.
 */
void Chip_PMU_DeepSleepState(LPC_PMU_T *pPMU);

/**
 * @brief	Enter MCU Power down mode
 * @param	pPMU	: Pointer to PMU register block
 * @return	None
 * @note	In Power-down mode, the peripherals receive no internal clocks.
 * The internal SRAM memory and all peripheral registers as well as the
 * processor maintain their internal states. The flash memory is powered
 * down. The WWDT, WKT, and BOD can remain active to wake up the system
 * on an interrupt.
 */
void Chip_PMU_PowerDownState(LPC_PMU_T *pPMU);

/**
 * @brief	Enter MCU Deep Power down mode
 * @param	pPMU	: Pointer to PMU register block
 * @return	None
 * @note	For maximal power savings, the entire system is shut down
 * except for the general purpose registers in the PMU and the self
 * wake-up timer. Only the general purpose registers in the PMU maintain
 * their internal states. The part can wake up on a pulse on the WAKEUP
 * pin or when the self wake-up timer times out. On wake-up, the part
 * reboots.
 */
void Chip_PMU_DeepPowerDownState(LPC_PMU_T *pPMU);

/**
 * @brief	Place the MCU in a low power state
 * @param	pPMU		: Pointer to PMU register block
 * @param	SleepMode	: Sleep mode
 * @return	None
 */
void Chip_PMU_Sleep(LPC_PMU_T *pPMU, CHIP_PMU_MCUPOWER_T SleepMode);

/**
 * @brief	Disables deep power-down mode
 * @param	pPMU	: Pointer to PMU register block
 * @return	None
 * @note	Calling this functions prevents entry to Deep power-down
 * mode. Once set, this can only be cleared by power-on reset.
 */
STATIC INLINE void Chip_PMU_DisableDeepPowerDown(LPC_PMU_T *pPMU)
{
	pPMU->PCON = PMU_PCON_NODPD | (pPMU->PCON & ~PMU_PCON_RESERVED);
}

/**
 * @brief	Returns sleep/power-down flags
 * @param	pPMU	: Pointer to PMU register block
 * @return	Or'ed values of PMU_PCON_SLEEPFLAG and PMU_PCON_DPDFLAG
 * @note	These indicate that the PMU is setup for entry into a low
 * power state on the next WFI() instruction.
 */
STATIC INLINE uint32_t Chip_PMU_GetSleepFlags(LPC_PMU_T *pPMU)
{
	return (pPMU->PCON & (PMU_PCON_SLEEPFLAG | PMU_PCON_DPDFLAG));
}

/**
 * @brief	Clears sleep/power-down flags
 * @param	pPMU	: Pointer to PMU register block
 * @param	flags	: Or'ed value of PMU_PCON_SLEEPFLAG and PMU_PCON_DPDFLAG
 * @return	Nothing
 * @note	Use this function to clear a low power state prior to calling
 * WFI().
 */
STATIC INLINE void Chip_PMU_ClearSleepFlags(LPC_PMU_T *pPMU, uint32_t flags)
{
	pPMU->PCON |= (flags & (~PMU_PCON_RESERVED));
}

/**
 * @brief	Sets deep power-down functions
 * @param	pPMU	: Pointer to PMU register block
 * @param	flags	: Or'ed value of PMU_DPDCTRL_* values
 * @return	Nothing
 * @note	Some of these functions may need to be set prior to going
 * into a low power mode. Note that some calls to this function enable
 * functions while others disable it based on the PMU_DPDCTRL_*
 * definitions.
 */
STATIC INLINE void Chip_PMU_SetPowerDownControl(LPC_PMU_T *pPMU, uint32_t flags)
{
	pPMU->DPDCTRL = flags | (pPMU->DPDCTRL & ~PMU_DPDCTRL_RESERVED);
}

/**
 * @brief	Cleats deep power-down functions
 * @param	pPMU	: Pointer to PMU register block
 * @param	flags	: Or'ed value of PMU_DPDCTRL_* values
 * @return	Nothing
 * @note	Some of these functions may need to be cleared prior to going
 * into a low power mode. Note that some calls to this function enable
 * functions while others disable it based on the PMU_DPDCTRL_*
 * definitions.
 */
STATIC INLINE void Chip_PMU_ClearPowerDownControl(LPC_PMU_T *pPMU, uint32_t flags)
{
	pPMU->DPDCTRL &= ~(flags | PMU_DPDCTRL_RESERVED);
}

/**
 * @}
 */

#ifdef __cplusplus
}
#endif

#endif /* __PMU_8XX_H_ */