libs/rt-thread
libs
/
rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
rt-thread/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_sdio.c

627 lines
23 KiB
C
Raw Normal View History

完善SWM320 BSP
2021-02-18 13:29:12 +08:00
/******************************************************************************************************************************************
update swm320 libraries
2021-05-06 10:10:29 +08:00
* 文件名称: SWM320_sdio.c
* 功能说明: SWM320单片机的SDIO接口驱动库
* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1
* 注意事项: 为了通用性、兼容性、易用性，只支持以512字节为单位的读写
* 版本日期: V1.1.0 2017年10月25日
* 升级记录:
完善SWM320 BSP
2021-02-18 13:29:12 +08:00
*
*
*******************************************************************************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION
* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE
* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN-
* -ECTION WITH THEIR PRODUCTS.
*
* COPYRIGHT 2012 Synwit Technology
*******************************************************************************************************************************************/
#include "SWM320.h"
#include "SWM320_sdio.h"
SD_CardInfo SD_cardInfo;
/******************************************************************************************************************************************
update swm320 libraries
2021-05-06 10:10:29 +08:00
* 函数名称: SDIO_Init()
* 功能说明: SDIO读写SD卡初始化，初始化成高速4线模式、读写以512字节大小进行
* 输 入: uint32_t freq SDIO_CLK时钟频率
* 输 出: uint32_t SD_RES_OK 操作成功 SD_RES_ERR 操作失败 SD_RES_TIMEOUT 操作超时
* 注意事项: 无
完善SWM320 BSP
2021-02-18 13:29:12 +08:00
******************************************************************************************************************************************/
uint32_t SDIO_Init(uint32_t freq)
{
format utf-8
2021-05-06 10:42:41 +08:00
uint32_t res;
uint32_t resp, resps[4];
SYS->CLKDIV &= ~SYS_CLKDIV_SDIO_Msk;
if (SystemCoreClock > 80000000) //SDIO时钟需要小于52MHz
SYS->CLKDIV |= (2 << SYS_CLKDIV_SDIO_Pos); //SDCLK = SYSCLK / 4
else
SYS->CLKDIV |= (1 << SYS_CLKDIV_SDIO_Pos); //SDCLK = SYSCLK / 2
SYS->CLKEN |= (0x01 << SYS_CLKEN_SDIO_Pos);
SDIO->CR2 = (1 << SDIO_CR2_RSTALL_Pos);
SDIO->CR1 = (1 << SDIO_CR1_CDSRC_Pos) |
(0 << SDIO_CR1_8BIT_Pos) |
(0 << SDIO_CR1_4BIT_Pos) |
(1 << SDIO_CR1_PWRON_Pos) |
(7 << SDIO_CR1_VOLT_Pos);
SDIO->CR2 = (1 << SDIO_CR2_CLKEN_Pos) |
(1 << SDIO_CR2_SDCLKEN_Pos) |
(calcSDCLKDiv(100000) << SDIO_CR2_SDCLKDIV_Pos) |
(0xC << SDIO_CR2_TIMEOUT_Pos); // 2**25 SDIO_CLK
while ((SDIO->CR2 & SDIO_CR2_CLKRDY_Msk) == 0)
;
SDIO->IFE = 0xFFFFFFFF;
SDIO_SendCmd(SD_CMD_GO_IDLE_STATE, 0x00, SD_RESP_NO, 0); //CMD0: GO_IDLE_STATE
res = SDIO_SendCmd(SD_CMD_SEND_IF_COND, 0x1AA, SD_RESP_32b, &resp); //CMD8: SEND_IF_COND, 检测工作电压、检测是否支持SD 2.0
if (res != SD_RES_OK)
return res;
if (resp == 0x1AA)
SD_cardInfo.CardType = SDIO_STD_CAPACITY_SD_CARD_V2_0;
else
SD_cardInfo.CardType = SDIO_STD_CAPACITY_SD_CARD_V1_1;
do //ACMD41: SD_CMD_SD_APP_OP_COND
{
res = SDIO_SendCmd(SD_CMD_APP_CMD, 0x00, SD_RESP_32b, &resp);
if (res != SD_RES_OK)
return res;
if (resp != 0x120)
return SD_RES_ERR; //不是SD卡，可能是MMC卡
if (SD_cardInfo.CardType == SDIO_STD_CAPACITY_SD_CARD_V2_0)
SDIO_SendCmd(SD_CMD_SD_APP_OP_COND, 0x80100000 | 0x40000000, SD_RESP_32b, &resp);
else
SDIO_SendCmd(SD_CMD_SD_APP_OP_COND, 0x80100000 | 0x00000000, SD_RESP_32b, &resp);
} while (((resp >> 31) & 0x01) == 0); //上电没完成时resp[31] == 0
if (((resp >> 30) & 0x01) == 1)
SD_cardInfo.CardType = SDIO_HIGH_CAPACITY_SD_CARD;
SDIO_SendCmd(SD_CMD_ALL_SEND_CID, 0x00, SD_RESP_128b, resps); //CMD2: SD_CMD_ALL_SEND_CID，获取CID
parseCID(resps);
SDIO_SendCmd(SD_CMD_SET_REL_ADDR, 0x00, SD_RESP_32b, &resp); //CMD3: SD_CMD_SET_REL_ADDR，设置RCA
SD_cardInfo.RCA = resp >> 16;
SDIO_SendCmd(SD_CMD_SEND_CSD, SD_cardInfo.RCA << 16, SD_RESP_128b, resps); //CMD9: SD_CMD_SEND_CSD，获取CSD
parseCSD(resps);
if (SD_cardInfo.CardBlockSize < 0x200)
return SD_RES_ERR; //本驱动只支持以512字节为单位的读写，所以最大读写单位必须不小于512
SDIO->CR2 &= ~(SDIO_CR2_SDCLKEN_Msk | SDIO_CR2_SDCLKDIV_Msk);
SDIO->CR2 |= (1 << SDIO_CR2_SDCLKEN_Pos) |
(calcSDCLKDiv(freq) << SDIO_CR2_SDCLKDIV_Pos); //初始化完成，SDCLK切换到高速
SDIO_SendCmd(SD_CMD_SEL_DESEL_CARD, SD_cardInfo.RCA << 16, SD_RESP_32b_busy, &resp); //CMD7: 选中卡，从Standy模式进入Transfer模式
SDIO->IF = SDIO_IF_TRXDONE_Msk;
SDIO_SendCmd(SD_CMD_APP_CMD, SD_cardInfo.RCA << 16, SD_RESP_32b, &resp);
SDIO_SendCmd(SD_CMD_APP_SD_SET_BUSWIDTH, SD_BUSWIDTH_4b, SD_RESP_32b, &resp); //切换成4位总线模式
SDIO->CR1 |= (1 << SDIO_CR1_4BIT_Pos);
SDIO_SendCmd(SD_CMD_SET_BLOCKLEN, 512, SD_RESP_32b, &resp); //固定块大小位512字节
SDIO->BLK = 512;
return SD_RES_OK;
完善SWM320 BSP
2021-02-18 13:29:12 +08:00
}
/******************************************************************************************************************************************
update swm320 libraries
2021-05-06 10:10:29 +08:00
* 函数名称: SDIO_BlockWrite()
* 功能说明: 向SD卡写入数据
* 输 入: uint32_t block_addr SD卡块地址，每块512字节
* uint32_t buff[] 要写入的数据
* 输 出: uint32_t SD_RES_OK 操作成功 SD_RES_ERR 操作失败 SD_RES_TIMEOUT 操作超时
* 注意事项: 无
完善SWM320 BSP
2021-02-18 13:29:12 +08:00
******************************************************************************************************************************************/
uint32_t SDIO_BlockWrite(uint32_t block_addr, uint32_t buff[])
{
format utf-8
2021-05-06 10:42:41 +08:00
uint32_t res, i;
uint32_t addr, resp;
if (SD_cardInfo.CardType == SDIO_HIGH_CAPACITY_SD_CARD)
addr = block_addr;
else
addr = block_addr * 512;
res = SDIO_SendCmdWithData(SD_CMD_WRITE_SINGLE_BLOCK, addr, SD_RESP_32b, &resp, 0, 1);
if (res != SD_RES_OK)
return res;
while ((SDIO->IF & SDIO_IF_BUFWRRDY_Msk) == 0)
__NOP();
SDIO->IF = SDIO_IF_BUFWRRDY_Msk;
for (i = 0; i < 512 / 4; i++)
SDIO->DATA = buff[i];
while ((SDIO->IF & SDIO_IF_TRXDONE_Msk) == 0)
__NOP();
SDIO->IF = SDIO_IF_TRXDONE_Msk;
return SD_RES_OK;
完善SWM320 BSP
2021-02-18 13:29:12 +08:00
}
/******************************************************************************************************************************************
update swm320 libraries
2021-05-06 10:10:29 +08:00
* 函数名称: SDIO_MultiBlockWrite()
* 功能说明: 向SD卡写入多块数据
* 输 入: uint32_t block_addr SD卡块地址，每块512字节
* uint16_t block_cnt 要写入的块数
* uint32_t buff[] 要写入的数据
* 输 出: uint32_t SD_RES_OK 操作成功 SD_RES_ERR 操作失败 SD_RES_TIMEOUT 操作超时
* 注意事项: 无
完善SWM320 BSP
2021-02-18 13:29:12 +08:00
******************************************************************************************************************************************/
uint32_t SDIO_MultiBlockWrite(uint32_t block_addr, uint16_t block_cnt, uint32_t buff[])
{
format utf-8
2021-05-06 10:42:41 +08:00
uint32_t res, i, j;
uint32_t addr, resp;
if (SD_cardInfo.CardType == SDIO_HIGH_CAPACITY_SD_CARD)
addr = block_addr;
else
addr = block_addr * 512;
res = SDIO_SendCmdWithData(SD_CMD_WRITE_MULT_BLOCK, addr, SD_RESP_32b, &resp, 0, block_cnt);
if (res != SD_RES_OK)
return res;
for (i = 0; i < block_cnt; i++)
{
while ((SDIO->IF & SDIO_IF_BUFWRRDY_Msk) == 0)
__NOP();
SDIO->IF = SDIO_IF_BUFWRRDY_Msk;
for (j = 0; j < 512 / 4; j++)
SDIO->DATA = buff[i * (512 / 4) + j];
}
while ((SDIO->IF & SDIO_IF_TRXDONE_Msk) == 0)
__NOP();
SDIO->IF = SDIO_IF_TRXDONE_Msk;
return SD_RES_OK;
完善SWM320 BSP
2021-02-18 13:29:12 +08:00
}
/******************************************************************************************************************************************
update swm320 libraries
2021-05-06 10:10:29 +08:00
* 函数名称: SDIO_DMABlockWrite()
* 功能说明: 通过DMA向SD卡写入多块数据
* 输 入: uint32_t block_addr SD卡块地址，每块512字节
* uint16_t block_cnt 要写入的块数
* uint32_t buff[] 要写入的数据
* 输 出: uint32_t SD_RES_OK 操作成功 SD_RES_ERR 操作失败 SD_RES_TIMEOUT 操作超时
* 注意事项: 无
完善SWM320 BSP
2021-02-18 13:29:12 +08:00
******************************************************************************************************************************************/
uint32_t SDIO_DMABlockWrite(uint32_t block_addr, uint16_t block_cnt, uint32_t buff[])
{
format utf-8
2021-05-06 10:42:41 +08:00
uint32_t res;
uint32_t addr, resp;
if (SD_cardInfo.CardType == SDIO_HIGH_CAPACITY_SD_CARD)
addr = block_addr;
else
addr = block_addr * 512;
SDIO->DMA_MEM_ADDR = (uint32_t)buff;
res = SDIO_SendCmdWithDataByDMA(SD_CMD_WRITE_MULT_BLOCK, addr, SD_RESP_32b, &resp, 0, block_cnt);
if (res != SD_RES_OK)
return res;
while ((SDIO->IF & SDIO_IF_TRXDONE_Msk) == 0)
__NOP();
SDIO->IF = SDIO_IF_TRXDONE_Msk;
return SD_RES_OK;
完善SWM320 BSP
2021-02-18 13:29:12 +08:00
}
/******************************************************************************************************************************************
update swm320 libraries
2021-05-06 10:10:29 +08:00
* 函数名称: SDIO_BlockRead()
* 功能说明: 从SD卡读出数据
* 输 入: uint32_t block_addr SD卡块地址，每块512字节
* uint32_t buff[] 读出的数据
* 输 出: uint32_t SD_RES_OK 操作成功 SD_RES_ERR 操作失败 SD_RES_TIMEOUT 操作超时
* 注意事项: 无
完善SWM320 BSP
2021-02-18 13:29:12 +08:00
******************************************************************************************************************************************/
uint32_t SDIO_BlockRead(uint32_t block_addr, uint32_t buff[])
{
format utf-8
2021-05-06 10:42:41 +08:00
uint32_t res, i;
完善SWM320 BSP
2021-02-18 13:29:12 +08:00
uint32_t addr, resp;
format utf-8
2021-05-06 10:42:41 +08:00
if (SD_cardInfo.CardType == SDIO_HIGH_CAPACITY_SD_CARD)
addr = block_addr;
else
addr = block_addr * 512;
res = SDIO_SendCmdWithData(SD_CMD_READ_SINGLE_BLOCK, addr, SD_RESP_32b, &resp, 1, 1);
if (res != SD_RES_OK)
return res;
while ((SDIO->IF & SDIO_IF_BUFRDRDY_Msk) == 0)
__NOP();
SDIO->IF = SDIO_IF_BUFRDRDY_Msk;
for (i = 0; i < 512 / 4; i++)
buff[i] = SDIO->DATA;
while ((SDIO->IF & SDIO_IF_TRXDONE_Msk) == 0)
__NOP();
SDIO->IF = SDIO_IF_TRXDONE_Msk;
return SD_RES_OK;
完善SWM320 BSP
2021-02-18 13:29:12 +08:00
}
/******************************************************************************************************************************************
update swm320 libraries
2021-05-06 10:10:29 +08:00
* 函数名称: SDIO_MultiBlockRead()
* 功能说明: 从SD卡读出多块数据
* 输 入: uint32_t block_addr SD卡块地址，每块512字节
* uint16_t block_cnt 要读出的块数
* uint32_t buff[] 读出的数据
* 输 出: uint32_t SD_RES_OK 操作成功 SD_RES_ERR 操作失败 SD_RES_TIMEOUT 操作超时
* 注意事项: 无
完善SWM320 BSP
2021-02-18 13:29:12 +08:00
******************************************************************************************************************************************/
uint32_t SDIO_MultiBlockRead(uint32_t block_addr, uint16_t block_cnt, uint32_t buff[])
{
format utf-8
2021-05-06 10:42:41 +08:00
uint32_t res, i, j;
完善SWM320 BSP
2021-02-18 13:29:12 +08:00
uint32_t addr, resp;
format utf-8
2021-05-06 10:42:41 +08:00
if (SD_cardInfo.CardType == SDIO_HIGH_CAPACITY_SD_CARD)
addr = block_addr;
else
addr = block_addr * 512;
res = SDIO_SendCmdWithData(SD_CMD_READ_MULT_BLOCK, addr, SD_RESP_32b, &resp, 1, block_cnt);
if (res != SD_RES_OK)
return res;
for (i = 0; i < block_cnt; i++)
{
while ((SDIO->IF & SDIO_IF_BUFRDRDY_Msk) == 0)
__NOP();
SDIO->IF = SDIO_IF_BUFRDRDY_Msk;
for (j = 0; j < 512 / 4; j++)
buff[i * (512 / 4) + j] = SDIO->DATA;
}
while ((SDIO->IF & SDIO_IF_TRXDONE_Msk) == 0)
__NOP();
SDIO->IF = SDIO_IF_TRXDONE_Msk;
return SD_RES_OK;
完善SWM320 BSP
2021-02-18 13:29:12 +08:00
}
/******************************************************************************************************************************************
update swm320 libraries
2021-05-06 10:10:29 +08:00
* 函数名称: SDIO_DMABlockRead()
* 功能说明: 通过DMA从SD卡读出多块数据
* 输 入: uint32_t block_addr SD卡块地址，每块512字节
* uint16_t block_cnt 要读出的块数
* uint32_t buff[] 读出的数据
* 输 出: uint32_t SD_RES_OK 操作成功 SD_RES_ERR 操作失败 SD_RES_TIMEOUT 操作超时
* 注意事项: 无
完善SWM320 BSP
2021-02-18 13:29:12 +08:00
******************************************************************************************************************************************/
uint32_t SDIO_DMABlockRead(uint32_t block_addr, uint16_t block_cnt, uint32_t buff[])
{
format utf-8
2021-05-06 10:42:41 +08:00
uint32_t res;
完善SWM320 BSP
2021-02-18 13:29:12 +08:00
uint32_t addr, resp;
format utf-8
2021-05-06 10:42:41 +08:00
if (SD_cardInfo.CardType == SDIO_HIGH_CAPACITY_SD_CARD)
addr = block_addr;
else
addr = block_addr * 512;
SDIO->DMA_MEM_ADDR = (uint32_t)buff;
res = SDIO_SendCmdWithDataByDMA(SD_CMD_READ_MULT_BLOCK, addr, SD_RESP_32b, &resp, 1, block_cnt);
if (res != SD_RES_OK)
return res;
while ((SDIO->IF & SDIO_IF_TRXDONE_Msk) == 0)
__NOP();
SDIO->IF = SDIO_IF_TRXDONE_Msk;
return SD_RES_OK;
完善SWM320 BSP
2021-02-18 13:29:12 +08:00
}
/******************************************************************************************************************************************
update swm320 libraries
2021-05-06 10:10:29 +08:00
* 函数名称: _SDIO_SendCmd()
* 功能说明: SDIO向SD卡发送命令
* 输 入: uint32_t cmd 命令索引
* uint32_t arg 命令参数
* uint32_t resp_type 响应类型，取值SD_RESP_NO、SD_RESP_32b、SD_RESP_128b、SD_RESP_32b_busy
* uint32_t *resp_data 响应内容
* uint32_t have_data 是否有数据传输
* uint32_t data_read 1 读SD卡 0 写SD卡
* uint16_t block_cnt 读写块个数
* uint32_t use_dma 1 使用DMA搬运数据
* 输 出: uint32_t SD_RES_OK 操作成功 SD_RES_ERR 操作失败 SD_RES_TIMEOUT 操作超时
* 注意事项: 无
完善SWM320 BSP
2021-02-18 13:29:12 +08:00
******************************************************************************************************************************************/
update swm320 libraries
2021-05-06 10:10:29 +08:00
uint32_t _SDIO_SendCmd(uint32_t cmd, uint32_t arg, uint32_t resp_type, uint32_t *resp_data, uint32_t have_data, uint32_t data_read, uint16_t block_cnt, uint32_t use_dma)
format utf-8
2021-05-06 10:42:41 +08:00
{
SDIO->BLK &= ~SDIO_BLK_COUNT_Msk;
SDIO->BLK |= (block_cnt << SDIO_BLK_COUNT_Pos);
SDIO->ARG = arg;
SDIO->CMD = (cmd << SDIO_CMD_CMDINDX_Pos) |
(0 << SDIO_CMD_CMDTYPE_Pos) |
(0 << SDIO_CMD_IDXCHECK_Pos) |
(0 << SDIO_CMD_CRCCHECK_Pos) |
(resp_type << SDIO_CMD_RESPTYPE_Pos) |
(have_data << SDIO_CMD_HAVEDATA_Pos) |
(data_read << SDIO_CMD_DIRREAD_Pos) |
((block_cnt > 1) << SDIO_CMD_MULTBLK_Pos) |
((block_cnt > 1) << SDIO_CMD_BLKCNTEN_Pos) |
((block_cnt > 1) << SDIO_CMD_AUTOCMD12_Pos) |
(use_dma << SDIO_CMD_DMAEN_Pos);
while ((SDIO->IF & SDIO_IF_CMDDONE_Msk) == 0)
{
if (SDIO->IF & SDIO_IF_CMDTIMEOUT_Msk)
{
SDIO->IF = SDIO_IF_CMDTIMEOUT_Msk;
return SD_RES_TIMEOUT;
}
else if (SDIO->IF & SDIO_IF_ERROR_Msk)
{
SDIO->IF = 0xFFFFFFFF;
return SD_RES_ERR;
}
}
SDIO->IF = SDIO_IF_CMDDONE_Msk;
完善SWM320 BSP
2021-02-18 13:29:12 +08:00
format utf-8
2021-05-06 10:42:41 +08:00
if (resp_type == SD_RESP_32b)
{
resp_data[0] = SDIO->RESP[0];
}
else if (resp_type == SD_RESP_128b)
{
//寄存器中将CID/CSD[127-8]依次存放在了RESP3-0[119-0]，最低位的CRC被丢掉
//读出数据时调整了顺序，将CID/CSD[127-8]存放在resp_data0-3[127-8]，最低8位填充0x00
resp_data[0] = (SDIO->RESP[3] << 8) + ((SDIO->RESP[2] >> 24) & 0xFF);
resp_data[1] = (SDIO->RESP[2] << 8) + ((SDIO->RESP[1] >> 24) & 0xFF);
resp_data[2] = (SDIO->RESP[1] << 8) + ((SDIO->RESP[0] >> 24) & 0xFF);
resp_data[3] = (SDIO->RESP[0] << 8) + 0x00;
}
return SD_RES_OK;
}
完善SWM320 BSP
2021-02-18 13:29:12 +08:00
void parseCID(uint32_t CID_Tab[4])
{
format utf-8
2021-05-06 10:42:41 +08:00
uint8_t tmp = 0;
/*!< Byte 0 */
tmp = (uint8_t)((CID_Tab[0] & 0xFF000000) >> 24);
SD_cardInfo.SD_cid.ManufacturerID = tmp;
/*!< Byte 1 */
tmp = (uint8_t)((CID_Tab[0] & 0x00FF0000) >> 16);
SD_cardInfo.SD_cid.OEM_AppliID = tmp << 8;
/*!< Byte 2 */
tmp = (uint8_t)((CID_Tab[0] & 0x000000FF00) >> 8);
SD_cardInfo.SD_cid.OEM_AppliID |= tmp;
/*!< Byte 3 */
tmp = (uint8_t)(CID_Tab[0] & 0x000000FF);
SD_cardInfo.SD_cid.ProdName1 = tmp << 24;
/*!< Byte 4 */
tmp = (uint8_t)((CID_Tab[1] & 0xFF000000) >> 24);
SD_cardInfo.SD_cid.ProdName1 |= tmp << 16;
/*!< Byte 5 */
tmp = (uint8_t)((CID_Tab[1] & 0x00FF0000) >> 16);
SD_cardInfo.SD_cid.ProdName1 |= tmp << 8;
/*!< Byte 6 */
tmp = (uint8_t)((CID_Tab[1] & 0x0000FF00) >> 8);
SD_cardInfo.SD_cid.ProdName1 |= tmp;
/*!< Byte 7 */
tmp = (uint8_t)(CID_Tab[1] & 0x000000FF);
SD_cardInfo.SD_cid.ProdName2 = tmp;
/*!< Byte 8 */
tmp = (uint8_t)((CID_Tab[2] & 0xFF000000) >> 24);
SD_cardInfo.SD_cid.ProdRev = tmp;
/*!< Byte 9 */
tmp = (uint8_t)((CID_Tab[2] & 0x00FF0000) >> 16);
SD_cardInfo.SD_cid.ProdSN = tmp << 24;
/*!< Byte 10 */
tmp = (uint8_t)((CID_Tab[2] & 0x0000FF00) >> 8);
SD_cardInfo.SD_cid.ProdSN |= tmp << 16;
/*!< Byte 11 */
tmp = (uint8_t)(CID_Tab[2] & 0x000000FF);
SD_cardInfo.SD_cid.ProdSN |= tmp << 8;
/*!< Byte 12 */
tmp = (uint8_t)((CID_Tab[3] & 0xFF000000) >> 24);
SD_cardInfo.SD_cid.ProdSN |= tmp;
/*!< Byte 13 */
tmp = (uint8_t)((CID_Tab[3] & 0x00FF0000) >> 16);
SD_cardInfo.SD_cid.Reserved1 |= (tmp & 0xF0) >> 4;
SD_cardInfo.SD_cid.ManufactDate = (tmp & 0x0F) << 8;
/*!< Byte 14 */
tmp = (uint8_t)((CID_Tab[3] & 0x0000FF00) >> 8);
SD_cardInfo.SD_cid.ManufactDate |= tmp;
完善SWM320 BSP
2021-02-18 13:29:12 +08:00
}
void parseCSD(uint32_t CSD_Tab[4])
{
format utf-8
2021-05-06 10:42:41 +08:00
uint8_t tmp = 0;
/*!< Byte 0 */
tmp = (uint8_t)((CSD_Tab[0] & 0xFF000000) >> 24);
SD_cardInfo.SD_csd.CSDStruct = (tmp & 0xC0) >> 6;
SD_cardInfo.SD_csd.SysSpecVersion = (tmp & 0x3C) >> 2;
SD_cardInfo.SD_csd.Reserved1 = tmp & 0x03;
/*!< Byte 1 */
tmp = (uint8_t)((CSD_Tab[0] & 0x00FF0000) >> 16);
SD_cardInfo.SD_csd.TAAC = tmp;
/*!< Byte 2 */
tmp = (uint8_t)((CSD_Tab[0] & 0x0000FF00) >> 8);
SD_cardInfo.SD_csd.NSAC = tmp;
/*!< Byte 3 */
tmp = (uint8_t)(CSD_Tab[0] & 0x000000FF);
SD_cardInfo.SD_csd.MaxBusClkFrec = tmp;
/*!< Byte 4 */
tmp = (uint8_t)((CSD_Tab[1] & 0xFF000000) >> 24);
SD_cardInfo.SD_csd.CardComdClasses = tmp << 4;
/*!< Byte 5 */
tmp = (uint8_t)((CSD_Tab[1] & 0x00FF0000) >> 16);
SD_cardInfo.SD_csd.CardComdClasses |= (tmp & 0xF0) >> 4;
SD_cardInfo.SD_csd.RdBlockLen = tmp & 0x0F;
/*!< Byte 6 */
tmp = (uint8_t)((CSD_Tab[1] & 0x0000FF00) >> 8);
SD_cardInfo.SD_csd.PartBlockRead = (tmp & 0x80) >> 7;
SD_cardInfo.SD_csd.WrBlockMisalign = (tmp & 0x40) >> 6;
SD_cardInfo.SD_csd.RdBlockMisalign = (tmp & 0x20) >> 5;
SD_cardInfo.SD_csd.DSRImpl = (tmp & 0x10) >> 4;
SD_cardInfo.SD_csd.Reserved2 = 0; /*!< Reserved */
if ((SD_cardInfo.CardType == SDIO_STD_CAPACITY_SD_CARD_V1_1) ||
(SD_cardInfo.CardType == SDIO_STD_CAPACITY_SD_CARD_V2_0))
{
SD_cardInfo.SD_csd.DeviceSize = (tmp & 0x03) << 10;
/*!< Byte 7 */
tmp = (uint8_t)(CSD_Tab[1] & 0x000000FF);
SD_cardInfo.SD_csd.DeviceSize |= (tmp) << 2;
/*!< Byte 8 */
tmp = (uint8_t)((CSD_Tab[2] & 0xFF000000) >> 24);
SD_cardInfo.SD_csd.DeviceSize |= (tmp & 0xC0) >> 6;
SD_cardInfo.SD_csd.MaxRdCurrentVDDMin = (tmp & 0x38) >> 3;
SD_cardInfo.SD_csd.MaxRdCurrentVDDMax = (tmp & 0x07);
/*!< Byte 9 */
tmp = (uint8_t)((CSD_Tab[2] & 0x00FF0000) >> 16);
SD_cardInfo.SD_csd.MaxWrCurrentVDDMin = (tmp & 0xE0) >> 5;
SD_cardInfo.SD_csd.MaxWrCurrentVDDMax = (tmp & 0x1C) >> 2;
SD_cardInfo.SD_csd.DeviceSizeMul = (tmp & 0x03) << 1;
/*!< Byte 10 */
tmp = (uint8_t)((CSD_Tab[2] & 0x0000FF00) >> 8);
SD_cardInfo.SD_csd.DeviceSizeMul |= (tmp & 0x80) >> 7;
SD_cardInfo.CardCapacity = (SD_cardInfo.SD_csd.DeviceSize + 1);
SD_cardInfo.CardCapacity *= (1 << (SD_cardInfo.SD_csd.DeviceSizeMul + 2));
SD_cardInfo.CardBlockSize = 1 << (SD_cardInfo.SD_csd.RdBlockLen);
SD_cardInfo.CardCapacity *= SD_cardInfo.CardBlockSize;
}
else if (SD_cardInfo.CardType == SDIO_HIGH_CAPACITY_SD_CARD)
{
/*!< Byte 7 */
tmp = (uint8_t)(CSD_Tab[1] & 0x000000FF);
SD_cardInfo.SD_csd.DeviceSize = (tmp & 0x3F) << 16;
/*!< Byte 8 */
tmp = (uint8_t)((CSD_Tab[2] & 0xFF000000) >> 24);
SD_cardInfo.SD_csd.DeviceSize |= (tmp << 8);
/*!< Byte 9 */
tmp = (uint8_t)((CSD_Tab[2] & 0x00FF0000) >> 16);
SD_cardInfo.SD_csd.DeviceSize |= (tmp);
/*!< Byte 10 */
tmp = (uint8_t)((CSD_Tab[2] & 0x0000FF00) >> 8);
SD_cardInfo.CardCapacity = (uint64_t)(SD_cardInfo.SD_csd.DeviceSize + 1) * 512 * 1024;
SD_cardInfo.CardBlockSize = 512;
}
SD_cardInfo.SD_csd.EraseGrSize = (tmp & 0x40) >> 6;
SD_cardInfo.SD_csd.EraseGrMul = (tmp & 0x3F) << 1;
/*!< Byte 11 */
tmp = (uint8_t)(CSD_Tab[2] & 0x000000FF);
SD_cardInfo.SD_csd.EraseGrMul |= (tmp & 0x80) >> 7;
SD_cardInfo.SD_csd.WrProtectGrSize = (tmp & 0x7F);
/*!< Byte 12 */
tmp = (uint8_t)((CSD_Tab[3] & 0xFF000000) >> 24);
SD_cardInfo.SD_csd.WrProtectGrEnable = (tmp & 0x80) >> 7;
SD_cardInfo.SD_csd.ManDeflECC = (tmp & 0x60) >> 5;
SD_cardInfo.SD_csd.WrSpeedFact = (tmp & 0x1C) >> 2;
SD_cardInfo.SD_csd.MaxWrBlockLen = (tmp & 0x03) << 2;
/*!< Byte 13 */
tmp = (uint8_t)((CSD_Tab[3] & 0x00FF0000) >> 16);
SD_cardInfo.SD_csd.MaxWrBlockLen |= (tmp & 0xC0) >> 6;
SD_cardInfo.SD_csd.WriteBlockPaPartial = (tmp & 0x20) >> 5;
SD_cardInfo.SD_csd.Reserved3 = 0;
SD_cardInfo.SD_csd.ContentProtectAppli = (tmp & 0x01);
/*!< Byte 14 */
tmp = (uint8_t)((CSD_Tab[3] & 0x0000FF00) >> 8);
SD_cardInfo.SD_csd.FileFormatGrouop = (tmp & 0x80) >> 7;
SD_cardInfo.SD_csd.CopyFlag = (tmp & 0x40) >> 6;
SD_cardInfo.SD_csd.PermWrProtect = (tmp & 0x20) >> 5;
SD_cardInfo.SD_csd.TempWrProtect = (tmp & 0x10) >> 4;
SD_cardInfo.SD_csd.FileFormat = (tmp & 0x0C) >> 2;
SD_cardInfo.SD_csd.ECC = (tmp & 0x03);
完善SWM320 BSP
2021-02-18 13:29:12 +08:00
}
uint32_t calcSDCLKDiv(uint32_t freq)
{
format utf-8
2021-05-06 10:42:41 +08:00
uint32_t prediv = ((SYS->CLKDIV & SYS_CLKDIV_SDIO_Msk) >> SYS_CLKDIV_SDIO_Pos);
uint32_t clkdiv = (SystemCoreClock / (1 << prediv)) / freq;
uint32_t regdiv = 0;
if (clkdiv > 128)
regdiv = 0x80;
else if (clkdiv > 64)
regdiv = 0x40;
else if (clkdiv > 32)
regdiv = 0x20;
else if (clkdiv > 16)
regdiv = 0x10;
else if (clkdiv > 8)
regdiv = 0x08;
else if (clkdiv > 4)
regdiv = 0x04;
else if (clkdiv > 2)
regdiv = 0x02;
else if (clkdiv > 1)
regdiv = 0x01;
else
regdiv = 0x00;
return regdiv;
完善SWM320 BSP
2021-02-18 13:29:12 +08:00
}