rt-thread/bsp/x86/drivers/include/bsp.h

/*
 * Copyright (c) 2006-2021, RT-Thread Development Team
 *
 * SPDX-License-Identifier: Apache-2.0
 *
 * Change Logs:
 * Date           Author       Notes
 * 2006-09-15     QiuYi        the first version */

#ifndef __BSP_H_
#define __BSP_H_

#include <i386.h>

#ifdef __cplusplus
extern "C" {
#endif

/*******************************************************************/
/*  Timer Register  */
/*******************************************************************/
#define TIMER_CNTR0         (IO_TIMER1 + 0) /* timer 0 counter port */
#define TIMER_CNTR1         (IO_TIMER1 + 1) /* timer 1 counter port */
#define TIMER_CNTR2         (IO_TIMER1 + 2) /* timer 2 counter port */
#define TIMER_MODE          (IO_TIMER1 + 3) /* timer mode port */
#define TIMER_SEL0          0x00    /* select counter 0 */
#define TIMER_SEL1          0x40    /* select counter 1 */
#define TIMER_INTTC         0x00    /* mode 0, intr on terminal cnt */
#define TIMER_ONESHOT       0x02    /* mode 1, one shot */
#define TIMER_RATEGEN       0x04    /* mode 2, rate generator */
#define TIMER_SQWAVE        0x06    /* mode 3, square wave */
#define TIMER_SWSTROBE      0x08    /* mode 4, s/w triggered strobe */
#define TIMER_HWSTROBE      0x0a    /* mode 5, h/w triggered strobe */
#define TIMER_LATCH         0x00    /* latch counter for reading */
#define TIMER_LSB           0x10    /* r/w counter LSB */
#define TIMER_MSB           0x20    /* r/w counter MSB */
#define TIMER_16BIT         0x30    /* r/w counter 16 bits, LSB first */
#define TIMER_BCD           0x01    /* count in BCD */

#define TIMER_FREQ          1193182
#define TIMER_DIV(x)        ((TIMER_FREQ+(x)/2)/(x))

#define IO_TIMER1           0x040   /* 8253 Timer #1 */

/*******************************************************************/
/* Interrupt Controller */
/*******************************************************************/
/* these are processor defined */
#define T_DIVIDE            0       /* divide error */
#define T_DEBUG             1       /* debug exception */
#define T_NMI               2       /* non-maskable interrupt */
#define T_BRKPT             3       /* breakpoint */
#define T_OFLOW             4       /* overflow */
#define T_BOUND             5       /* bounds check */
#define T_ILLOP             6       /* illegal opcode */
#define T_DEVICE            7       /* device not available */
#define T_DBLFLT            8       /* double fault */
/* 9 is reserved */
#define T_TSS           10      /* invalid task switch segment */
#define T_SEGNP         11      /* segment not present */
#define T_STACK         12      /* stack exception */
#define T_GPFLT         13      /* genernal protection fault */
#define T_PGFLT         14      /* page fault */
/* 15 is reserved */
#define T_FPERR         16      /* floating point error */
#define T_ALIGN         17      /* aligment check */
#define T_MCHK          18      /* machine check */
#define T_DEFAULT       500     /* catchall */

#define INTTIMER0       0
#define INTKEYBOARD     1
#define INTUART0_RX     4
#define CLOCK_IRQ       0
#define KEYBOARD_IRQ    1
#define CASCADE_IRQ     2   /* cascade enable for 2nd AT controller */
#define ETHER_IRQ       3   /* default ethernet interrupt vector */
#define SECONDARY_IRQ   3   /* RS232 interrupt vector for port 2 */
#define RS232_IRQ       4   /* RS232 interrupt vector for port 1 */
#define XT_WINI_IRQ     5   /* xt winchester */
#define FLOPPY_IRQ      6   /* floppy disk */
#define PRINTER_IRQ     7
#define AT_WINI_IRQ     14  /* at winchester */
/* I/O Addresses of the two 8259A programmable interrupt controllers */
#define IO_PIC1         0x20    /* Master(IRQs 0-7) */
#define IO_PIC2         0xa0    /* Slave(IRQs 8-15) */
#define IRQ_SLAVE       0x2     /* IRQ at which slave connects to master */
#define IRQ_OFFSET      0x20    /* IRQ 0 corresponds to int IRQ_OFFSET */

#define MAX_HANDLERS    16      /*max number of isr handler*/

/*******************************************************************/
/* CRT Register */
/*******************************************************************/
#define MONO_BASE       0x3b4
#define MONO_BUF        0xb0000
#define CGA_BASE        0x3d4
#define CGA_BUF         0xb8000

#define CRT_ROWS        25
#define CRT_COLS        80
#define CRT_SIZE        (CRT_ROWS * CRT_COLS)

/*******************************************************************/
/* Keyboard Register */
/*******************************************************************/
#define KBSTATP         0x64    /* kbd controller status port(I) */
#define KBS_DIB         0x01    /* kbd data in buffer */
#define KBDATAP         0x60    /* kbd data port(I) */
/* AT keyboard */
/* 8042 ports */
#define KB_DATA         0x60    /* I/O port for keyboard data
                                 * Read : Read Output Buffer
                                 * Write: Write Input Buffer(8042 Data&8048 Command) */
#define KB_CMD          0x64    /* I/O port for keyboard command
                                 * Read : Read Status Register
                                 * Write: Write Input Buffer(8042 Command) */
#define LED_CODE        0xED
#define KB_ACK          0xFA

/*******************************************************************/
/* Serial Register */
/*******************************************************************/
/*Serial I/O code */
#define COM1            0x3F8
#define COMSTATUS       5
#define COMDATA         0x01
#define COMREAD         0
#define COMWRITE        0

/* Bits definition of the Line Status Register (LSR)*/
#define DR              0x01    /* Data Ready */
#define OE              0x02    /* Overrun Error */
#define PE              0x04    /* Parity Error */
#define FE              0x08    /* Framing Error */
#define BI              0x10    /* Break Interrupt */
#define THRE            0x20    /* Transmitter Holding Register Empty */
#define TEMT            0x40    /* Transmitter Empty */
#define ERFIFO          0x80    /* Error receive Fifo */

#ifdef __cplusplus
}
#endif

#endif /* __BSP_H_ */