rt-thread/bsp/renesas/ra6m3-hmi-board/ra_gen/hal_data.c

/* generated HAL source file - do not edit */
#include "hal_data.h"

/* Macros to tie dynamic ELC links to ADC_TRIGGER_SYNC_ELC option in adc_trigger_t. */
#define ADC_TRIGGER_ADC0        ADC_TRIGGER_SYNC_ELC
#define ADC_TRIGGER_ADC0_B      ADC_TRIGGER_SYNC_ELC
#define ADC_TRIGGER_ADC1        ADC_TRIGGER_SYNC_ELC
#define ADC_TRIGGER_ADC1_B      ADC_TRIGGER_SYNC_ELC
gpt_instance_ctrl_t g_timer2_ctrl;
#if 0
const gpt_extended_pwm_cfg_t g_timer2_pwm_extend =
{
    .trough_ipl          = (BSP_IRQ_DISABLED),
#if defined(VECTOR_NUMBER_GPT2_COUNTER_UNDERFLOW)
    .trough_irq          = VECTOR_NUMBER_GPT2_COUNTER_UNDERFLOW,
#else
    .trough_irq          = FSP_INVALID_VECTOR,
#endif
    .poeg_link           = GPT_POEG_LINK_POEG0,
    .output_disable      =  GPT_OUTPUT_DISABLE_NONE,
    .adc_trigger         =  GPT_ADC_TRIGGER_NONE,
    .dead_time_count_up  = 0,
    .dead_time_count_down = 0,
    .adc_a_compare_match = 0,
    .adc_b_compare_match = 0,
    .interrupt_skip_source = GPT_INTERRUPT_SKIP_SOURCE_NONE,
    .interrupt_skip_count  = GPT_INTERRUPT_SKIP_COUNT_0,
    .interrupt_skip_adc    = GPT_INTERRUPT_SKIP_ADC_NONE,
    .gtioca_disable_setting = GPT_GTIOC_DISABLE_PROHIBITED,
    .gtiocb_disable_setting = GPT_GTIOC_DISABLE_PROHIBITED,
};
#endif
const gpt_extended_cfg_t g_timer2_extend =
{
    .gtioca = { .output_enabled = false,
                .stop_level     = GPT_PIN_LEVEL_LOW
              },
    .gtiocb = { .output_enabled = true,
                .stop_level     = GPT_PIN_LEVEL_LOW
              },
    .start_source        = (gpt_source_t) ( GPT_SOURCE_NONE),
    .stop_source         = (gpt_source_t) ( GPT_SOURCE_NONE),
    .clear_source        = (gpt_source_t) ( GPT_SOURCE_NONE),
    .count_up_source     = (gpt_source_t) ( GPT_SOURCE_NONE),
    .count_down_source   = (gpt_source_t) ( GPT_SOURCE_NONE),
    .capture_a_source    = (gpt_source_t) ( GPT_SOURCE_NONE),
    .capture_b_source    = (gpt_source_t) ( GPT_SOURCE_NONE),
    .capture_a_ipl       = (BSP_IRQ_DISABLED),
    .capture_b_ipl       = (BSP_IRQ_DISABLED),
#if defined(VECTOR_NUMBER_GPT2_CAPTURE_COMPARE_A)
    .capture_a_irq       = VECTOR_NUMBER_GPT2_CAPTURE_COMPARE_A,
#else
    .capture_a_irq       = FSP_INVALID_VECTOR,
#endif
#if defined(VECTOR_NUMBER_GPT2_CAPTURE_COMPARE_B)
    .capture_b_irq       = VECTOR_NUMBER_GPT2_CAPTURE_COMPARE_B,
#else
    .capture_b_irq       = FSP_INVALID_VECTOR,
#endif
    .capture_filter_gtioca       = GPT_CAPTURE_FILTER_NONE,
    .capture_filter_gtiocb       = GPT_CAPTURE_FILTER_NONE,
#if 0
    .p_pwm_cfg                   = &g_timer2_pwm_extend,
#else
    .p_pwm_cfg                   = NULL,
#endif
#if 0
    .gtior_setting.gtior_b.gtioa  = (0U << 4U) | (0U << 2U) | (0U << 0U),
    .gtior_setting.gtior_b.oadflt = (uint32_t) GPT_PIN_LEVEL_LOW,
    .gtior_setting.gtior_b.oahld  = 0U,
    .gtior_setting.gtior_b.oae    = (uint32_t) false,
    .gtior_setting.gtior_b.oadf   = (uint32_t) GPT_GTIOC_DISABLE_PROHIBITED,
    .gtior_setting.gtior_b.nfaen  = ((uint32_t) GPT_CAPTURE_FILTER_NONE & 1U),
    .gtior_setting.gtior_b.nfcsa  = ((uint32_t) GPT_CAPTURE_FILTER_NONE >> 1U),
    .gtior_setting.gtior_b.gtiob  = (0U << 4U) | (0U << 2U) | (0U << 0U),
    .gtior_setting.gtior_b.obdflt = (uint32_t) GPT_PIN_LEVEL_LOW,
    .gtior_setting.gtior_b.obhld  = 0U,
    .gtior_setting.gtior_b.obe    = (uint32_t) true,
    .gtior_setting.gtior_b.obdf   = (uint32_t) GPT_GTIOC_DISABLE_PROHIBITED,
    .gtior_setting.gtior_b.nfben  = ((uint32_t) GPT_CAPTURE_FILTER_NONE & 1U),
    .gtior_setting.gtior_b.nfcsb  = ((uint32_t) GPT_CAPTURE_FILTER_NONE >> 1U),
#else
    .gtior_setting.gtior = 0U,
#endif
};
const timer_cfg_t g_timer2_cfg =
{
    .mode                = TIMER_MODE_PWM,
    /* Actual period: 35.791394133333334 seconds. Actual duty: 50%. */ .period_counts = (uint32_t) 0x100000000, .duty_cycle_counts = 0x80000000, .source_div = (timer_source_div_t)0,
    .channel             = 2,
    .p_callback          = NULL,
    /** If NULL then do not add & */
#if defined(NULL)
    .p_context           = NULL,
#else
    .p_context           = &NULL,
#endif
    .p_extend            = &g_timer2_extend,
    .cycle_end_ipl       = (BSP_IRQ_DISABLED),
#if defined(VECTOR_NUMBER_GPT2_COUNTER_OVERFLOW)
    .cycle_end_irq       = VECTOR_NUMBER_GPT2_COUNTER_OVERFLOW,
#else
    .cycle_end_irq       = FSP_INVALID_VECTOR,
#endif
};
/* Instance structure to use this module. */
const timer_instance_t g_timer2 =
{
    .p_ctrl        = &g_timer2_ctrl,
    .p_cfg         = &g_timer2_cfg,
    .p_api         = &g_timer_on_gpt
};
sci_uart_instance_ctrl_t     g_uart4_ctrl;

            baud_setting_t               g_uart4_baud_setting =
            {
                /* Baud rate calculated with 0.160% error. */ .abcse = 0, .abcs = 0, .bgdm = 1, .cks = 0, .brr = 64, .mddr = (uint8_t) 256, .brme = false
            };

            /** UART extended configuration for UARTonSCI HAL driver */
            const sci_uart_extended_cfg_t g_uart4_cfg_extend =
            {
                .clock                = SCI_UART_CLOCK_INT,
                .rx_edge_start          = SCI_UART_START_BIT_FALLING_EDGE,
                .noise_cancel         = SCI_UART_NOISE_CANCELLATION_DISABLE,
                .rx_fifo_trigger        = SCI_UART_RX_FIFO_TRIGGER_MAX,
                .p_baud_setting         = &g_uart4_baud_setting,
                .flow_control           = SCI_UART_FLOW_CONTROL_RTS,
                #if 0xFF != 0xFF
                .flow_control_pin       = BSP_IO_PORT_FF_PIN_0xFF,
                #else
                .flow_control_pin       = (bsp_io_port_pin_t) UINT16_MAX,
                #endif
            };

            /** UART interface configuration */
            const uart_cfg_t g_uart4_cfg =
            {
                .channel             = 4,
                .data_bits           = UART_DATA_BITS_8,
                .parity              = UART_PARITY_OFF,
                .stop_bits           = UART_STOP_BITS_1,
                .p_callback          = user_uart4_callback,
                .p_context           = NULL,
                .p_extend            = &g_uart4_cfg_extend,
#define RA_NOT_DEFINED (1)
#if (RA_NOT_DEFINED == RA_NOT_DEFINED)
                .p_transfer_tx       = NULL,
#else
                .p_transfer_tx       = &RA_NOT_DEFINED,
#endif
#if (RA_NOT_DEFINED == RA_NOT_DEFINED)
                .p_transfer_rx       = NULL,
#else
                .p_transfer_rx       = &RA_NOT_DEFINED,
#endif
#undef RA_NOT_DEFINED
                .rxi_ipl             = (12),
                .txi_ipl             = (12),
                .tei_ipl             = (12),
                .eri_ipl             = (12),
#if defined(VECTOR_NUMBER_SCI4_RXI)
                .rxi_irq             = VECTOR_NUMBER_SCI4_RXI,
#else
                .rxi_irq             = FSP_INVALID_VECTOR,
#endif
#if defined(VECTOR_NUMBER_SCI4_TXI)
                .txi_irq             = VECTOR_NUMBER_SCI4_TXI,
#else
                .txi_irq             = FSP_INVALID_VECTOR,
#endif
#if defined(VECTOR_NUMBER_SCI4_TEI)
                .tei_irq             = VECTOR_NUMBER_SCI4_TEI,
#else
                .tei_irq             = FSP_INVALID_VECTOR,
#endif
#if defined(VECTOR_NUMBER_SCI4_ERI)
                .eri_irq             = VECTOR_NUMBER_SCI4_ERI,
#else
                .eri_irq             = FSP_INVALID_VECTOR,
#endif
            };

/* Instance structure to use this module. */
const uart_instance_t g_uart4 =
{
    .p_ctrl        = &g_uart4_ctrl,
    .p_cfg         = &g_uart4_cfg,
    .p_api         = &g_uart_on_sci
};
adc_instance_ctrl_t g_adc0_ctrl;
const adc_extended_cfg_t g_adc0_cfg_extend =
{
    .add_average_count   = ADC_ADD_OFF,
    .clearing            = ADC_CLEAR_AFTER_READ_ON,
    .trigger_group_b     = ADC_TRIGGER_SYNC_ELC,
    .double_trigger_mode = ADC_DOUBLE_TRIGGER_DISABLED,
    .adc_vref_control    = ADC_VREF_CONTROL_VREFH,
    .enable_adbuf        = 0,
#if defined(VECTOR_NUMBER_ADC0_WINDOW_A)
    .window_a_irq        = VECTOR_NUMBER_ADC0_WINDOW_A,
#else
    .window_a_irq        = FSP_INVALID_VECTOR,
#endif
    .window_a_ipl        = (BSP_IRQ_DISABLED),
#if defined(VECTOR_NUMBER_ADC0_WINDOW_B)
    .window_b_irq      = VECTOR_NUMBER_ADC0_WINDOW_B,
#else
    .window_b_irq      = FSP_INVALID_VECTOR,
#endif
    .window_b_ipl      = (BSP_IRQ_DISABLED),
};
const adc_cfg_t g_adc0_cfg =
{
    .unit                = 0,
    .mode                = ADC_MODE_CONTINUOUS_SCAN,
    .resolution          = ADC_RESOLUTION_12_BIT,
    .alignment           = (adc_alignment_t) ADC_ALIGNMENT_RIGHT,
    .trigger             = ADC_TRIGGER_SOFTWARE,
    .p_callback          = NULL,
    /** If NULL then do not add & */
#if defined(NULL)
    .p_context           = NULL,
#else
    .p_context           = &NULL,
#endif
    .p_extend            = &g_adc0_cfg_extend,
#if defined(VECTOR_NUMBER_ADC0_SCAN_END)
    .scan_end_irq        = VECTOR_NUMBER_ADC0_SCAN_END,
#else
    .scan_end_irq        = FSP_INVALID_VECTOR,
#endif
    .scan_end_ipl        = (BSP_IRQ_DISABLED),
#if defined(VECTOR_NUMBER_ADC0_SCAN_END_B)
    .scan_end_b_irq      = VECTOR_NUMBER_ADC0_SCAN_END_B,
#else
    .scan_end_b_irq      = FSP_INVALID_VECTOR,
#endif
    .scan_end_b_ipl      = (BSP_IRQ_DISABLED),
};
#if ((0) | (0))
const adc_window_cfg_t g_adc0_window_cfg =
{
    .compare_mask        =  0,
    .compare_mode_mask   =  0,
    .compare_cfg         = (0) | (0) | (0) | (ADC_COMPARE_CFG_EVENT_OUTPUT_OR),
    .compare_ref_low     = 0,
    .compare_ref_high    = 0,
    .compare_b_channel   = (ADC_WINDOW_B_CHANNEL_0),
    .compare_b_mode      = (ADC_WINDOW_B_MODE_LESS_THAN_OR_OUTSIDE),
    .compare_b_ref_low   = 0,
    .compare_b_ref_high  = 0,
};
#endif
const adc_channel_cfg_t g_adc0_channel_cfg =
{
    .scan_mask           = ADC_MASK_CHANNEL_0 | ADC_MASK_CHANNEL_1 | ADC_MASK_CHANNEL_2 | ADC_MASK_CHANNEL_3 | ADC_MASK_CHANNEL_5 | ADC_MASK_CHANNEL_7 | ADC_MASK_CHANNEL_20 |  0,
    .scan_mask_group_b   =  0,
    .priority_group_a    = ADC_GROUP_A_PRIORITY_OFF,
    .add_mask            =  0,
    .sample_hold_mask    =  0,
    .sample_hold_states  = 24,
#if ((0) | (0))
    .p_window_cfg        = (adc_window_cfg_t *) &g_adc0_window_cfg,
#else
    .p_window_cfg        = NULL,
#endif
};
/* Instance structure to use this module. */
const adc_instance_t g_adc0 =
{
    .p_ctrl    = &g_adc0_ctrl,
    .p_cfg     = &g_adc0_cfg,
    .p_channel_cfg = &g_adc0_channel_cfg,
    .p_api     = &g_adc_on_adc
};
sci_uart_instance_ctrl_t     g_uart9_ctrl;

            baud_setting_t               g_uart9_baud_setting =
            {
                /* Baud rate calculated with 0.160% error. */ .abcse = 0, .abcs = 0, .bgdm = 1, .cks = 0, .brr = 64, .mddr = (uint8_t) 256, .brme = false
            };

            /** UART extended configuration for UARTonSCI HAL driver */
            const sci_uart_extended_cfg_t g_uart9_cfg_extend =
            {
                .clock                = SCI_UART_CLOCK_INT,
                .rx_edge_start          = SCI_UART_START_BIT_FALLING_EDGE,
                .noise_cancel         = SCI_UART_NOISE_CANCELLATION_DISABLE,
                .rx_fifo_trigger        = SCI_UART_RX_FIFO_TRIGGER_MAX,
                .p_baud_setting         = &g_uart9_baud_setting,
                .flow_control           = SCI_UART_FLOW_CONTROL_RTS,
                #if 0xFF != 0xFF
                .flow_control_pin       = BSP_IO_PORT_FF_PIN_0xFF,
                #else
                .flow_control_pin       = (bsp_io_port_pin_t) UINT16_MAX,
                #endif
            };

            /** UART interface configuration */
            const uart_cfg_t g_uart9_cfg =
            {
                .channel             = 9,
                .data_bits           = UART_DATA_BITS_8,
                .parity              = UART_PARITY_OFF,
                .stop_bits           = UART_STOP_BITS_1,
                .p_callback          = user_uart9_callback,
                .p_context           = NULL,
                .p_extend            = &g_uart9_cfg_extend,
#define RA_NOT_DEFINED (1)
#if (RA_NOT_DEFINED == RA_NOT_DEFINED)
                .p_transfer_tx       = NULL,
#else
                .p_transfer_tx       = &RA_NOT_DEFINED,
#endif
#if (RA_NOT_DEFINED == RA_NOT_DEFINED)
                .p_transfer_rx       = NULL,
#else
                .p_transfer_rx       = &RA_NOT_DEFINED,
#endif
#undef RA_NOT_DEFINED
                .rxi_ipl             = (12),
                .txi_ipl             = (12),
                .tei_ipl             = (12),
                .eri_ipl             = (12),
#if defined(VECTOR_NUMBER_SCI9_RXI)
                .rxi_irq             = VECTOR_NUMBER_SCI9_RXI,
#else
                .rxi_irq             = FSP_INVALID_VECTOR,
#endif
#if defined(VECTOR_NUMBER_SCI9_TXI)
                .txi_irq             = VECTOR_NUMBER_SCI9_TXI,
#else
                .txi_irq             = FSP_INVALID_VECTOR,
#endif
#if defined(VECTOR_NUMBER_SCI9_TEI)
                .tei_irq             = VECTOR_NUMBER_SCI9_TEI,
#else
                .tei_irq             = FSP_INVALID_VECTOR,
#endif
#if defined(VECTOR_NUMBER_SCI9_ERI)
                .eri_irq             = VECTOR_NUMBER_SCI9_ERI,
#else
                .eri_irq             = FSP_INVALID_VECTOR,
#endif
            };

/* Instance structure to use this module. */
const uart_instance_t g_uart9 =
{
    .p_ctrl        = &g_uart9_ctrl,
    .p_cfg         = &g_uart9_cfg,
    .p_api         = &g_uart_on_sci
};
void g_hal_init(void) {
g_common_init();
}