rt-thread/bsp/ls1cdev/Kconfig

mainmenu "RT-Thread Configuration"

config BSP_DIR
    string
    option env="BSP_ROOT"
    default "."

config RTT_DIR
    string
    option env="RTT_ROOT"
    default "../.."

config PKGS_DIR
    string
    option env="PKGS_ROOT"
    default "packages"

source "$RTT_DIR/Kconfig"
source "$RTT_DIR/libcpu/mips/common/Kconfig"
source "$PKGS_DIR/Kconfig"

config SOC_LS
    bool
    default y

config SOC_LS1C300
    bool
    select RT_USING_COMPONENTS_INIT
    select RT_USING_USER_MAIN
    default y

choice
    prompt "Board Type"
        config RT_LS1C_OPENLOONGSON
            bool "OpenLoongson Board"
        config RT_LS1C_BAICAIBOARD
            bool "Baicai Board"
endchoice

config RT_USING_SELF_BOOT
    bool "Enable RT-Thread run without bootloader"
    default n

if RT_USING_SELF_BOOT
    config RT_SELF_BOOT_DEBUG
    bool "Debug self boot code"
    default n
endif

if RT_USING_SERIAL
config RT_USING_UART2
    bool "Using RT_USING_UART2"
    default y
config RT_USING_UART1
    bool "Using RT_USING_UART1"
    default y
config RT_USING_UART3
    bool "Using RT_USING_UART3"
    default n

config RT_UART_RX_BUFFER_SIZE
    int "The rx buffer size"
    default 64 if RT_USING_SERIAL
    default 64
endif

config RT_USING_GMAC_INT_MODE
    bool "Using RT_USING_GMAC_INT_MODE"
    default y

config RT_USING_SPI0
    bool "Enable SPI0"
	select RT_USING_SPI
    default y

config RT_USING_SPI1
    bool "Enable SPI1"
	select RT_USING_SPI
    default y

if RT_USING_I2C
config RT_USING_I2C1
    bool "Enable I2C1"
    default y

config RT_USING_I2C2
    bool "Enable I2C2"
    default y
endif


config USING_BXCAN0
    bool "Enable CAN0"
	select RT_USING_CAN
    default y

config USING_BXCAN1
    bool "Enable CAN1"
	select RT_USING_CAN
    default y

if RT_USING_CAN
config RT_CAN_USING_HDR
    bool "Using RT_CAN_USING_HDR"
	select RT_USING_CAN
    default y
endif

choice
    prompt "Touch format"
    default NO_TOUCH

    config NO_TOUCH
        bool "with no touch"

if RT_USING_RTGUI
    config XPT2046_USING_TOUCH
        bool "with XPT2046 touch"
endif

    config TINA_USING_TOUCH
        bool "with TINA touch"
endchoice

if RT_USING_RTC
config RT_RTC_NAME
    string "RT_RTC_NAME"
    default "RTC"
endif
[BSP][ls1c]Add kconfig. 2018-02-09 09:25:20 +08:00			`mainmenu "RT-Thread Configuration"`

[all BSP]fix kconfig file syntax error 2019-01-16 23:23:38 +08:00			`config BSP_DIR`
[BSP][ls1c]Add kconfig. 2018-02-09 09:25:20 +08:00			`string`
			`option env="BSP_ROOT"`
			`default "."`

[all BSP]fix kconfig file syntax error 2019-01-16 23:23:38 +08:00			`config RTT_DIR`
[BSP][ls1c]Add kconfig. 2018-02-09 09:25:20 +08:00			`string`
			`option env="RTT_ROOT"`
[BSP][ls1c]Modify kconfig RTT_DIR 2018-02-09 10:02:25 +08:00			`default "../.."`
[bsp] Adapt ls{1b,1c}dev to new mips common code LS1C selfboot feature have been rewiritten, and we changed bare boot base to 0x80000000 to better utilize memory. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> 2019-12-07 01:04:25 +08:00
[all BSP]fix kconfig file syntax error 2019-01-16 23:23:38 +08:00			`config PKGS_DIR`
[BSP][ls1c]Add kconfig. 2018-02-09 09:25:20 +08:00			`string`
			`option env="PKGS_ROOT"`
			`default "packages"`

[bsp/ls1cdev] 1、uart驱动重写，采用uart驱动框架 2、添加并修改勤为本ls1c_uart 3、开启main为用户程序入口，删除application.c和startup.c,并对初始化部分做相应调整更新。 4、开启dhcp 2018-05-10 22:20:37 +08:00			`source "$RTT_DIR/Kconfig"`
[bsp] Adapt ls{1b,1c}dev to new mips common code LS1C selfboot feature have been rewiritten, and we changed bare boot base to 0x80000000 to better utilize memory. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> 2019-12-07 01:04:25 +08:00			`source "$RTT_DIR/libcpu/mips/common/Kconfig"`
[bsp/ls1cdev] 1、uart驱动重写，采用uart驱动框架 2、添加并修改勤为本ls1c_uart 3、开启main为用户程序入口，删除application.c和startup.c,并对初始化部分做相应调整更新。 4、开启dhcp 2018-05-10 22:20:37 +08:00			`source "$PKGS_DIR/Kconfig"`
[BSP][ls1c]Add kconfig. 2018-02-09 09:25:20 +08:00
刷新龙芯工程 2021-09-15 23:39:01 +08:00			`config SOC_LS`
			`bool`
			`default y`

mips:gs232:LS1C300 have 5 group INTC cells but LS1B have 4 group INTC cells 2021-01-31 21:56:30 +08:00			`config SOC_LS1C300`
[bsp] Adapt ls{1b,1c}dev to new mips common code LS1C selfboot feature have been rewiritten, and we changed bare boot base to 0x80000000 to better utilize memory. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> 2019-12-07 01:04:25 +08:00			`bool`
[bsp][Kconfig]在bsp的Kconfig中select组件初始化与user main的选项 2019-09-11 12:06:43 +08:00			`select RT_USING_COMPONENTS_INIT`
			`select RT_USING_USER_MAIN`
			`default y`

[bsp] Adapt ls{1b,1c}dev to new mips common code LS1C selfboot feature have been rewiritten, and we changed bare boot base to 0x80000000 to better utilize memory. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> 2019-12-07 01:04:25 +08:00			`choice`
			`prompt "Board Type"`
			`config RT_LS1C_OPENLOONGSON`
			`bool "OpenLoongson Board"`
			`config RT_LS1C_BAICAIBOARD`
			`bool "Baicai Board"`
			`endchoice`

[bsp/ls1cdev]添加自引导特性，添加配置选项 1、添加自引导特性，添加配置选项 2、修复cpuport.c的bug 3、修复ls1c_pin.c不能默认复用的bug 2018-05-12 19:33:32 +08:00			`config RT_USING_SELF_BOOT`
			`bool "Enable RT-Thread run without bootloader"`
			`default n`
[bsp] Adapt ls{1b,1c}dev to new mips common code LS1C selfboot feature have been rewiritten, and we changed bare boot base to 0x80000000 to better utilize memory. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> 2019-12-07 01:04:25 +08:00
			`if RT_USING_SELF_BOOT`
			`config RT_SELF_BOOT_DEBUG`
			`bool "Debug self boot code"`
			`default n`
			`endif`

[bsp][ls1c] update config 2018-03-17 19:15:47 +08:00			`if RT_USING_SERIAL`
[BSP][ls1c]Add kconfig. 2018-02-09 09:25:20 +08:00			`config RT_USING_UART2`
			`bool "Using RT_USING_UART2"`
[bsp] Adapt ls{1b,1c}dev to new mips common code LS1C selfboot feature have been rewiritten, and we changed bare boot base to 0x80000000 to better utilize memory. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> 2019-12-07 01:04:25 +08:00			`default y`
[BSP][all ls1c]change license to Apache-2.0 [BSP][ls1c] add rtc library [BSP][ls1c] add pwm ,touch , rtc driver 2018-12-24 18:49:00 +08:00			`config RT_USING_UART1`
			`bool "Using RT_USING_UART1"`
[bsp] Adapt ls{1b,1c}dev to new mips common code LS1C selfboot feature have been rewiritten, and we changed bare boot base to 0x80000000 to better utilize memory. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> 2019-12-07 01:04:25 +08:00			`default y`
[bsp][ls1c] add uart3 driver; fix net driver for lwip2.1.0; fix drv_t ouch driver; fix display driver; fix can driver. 2019-04-26 21:00:20 +08:00			`config RT_USING_UART3`
			`bool "Using RT_USING_UART3"`
[bsp] Adapt ls{1b,1c}dev to new mips common code LS1C selfboot feature have been rewiritten, and we changed bare boot base to 0x80000000 to better utilize memory. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> 2019-12-07 01:04:25 +08:00			`default n`
[BSP][ls1c]Add kconfig. 2018-02-09 09:25:20 +08:00
			`config RT_UART_RX_BUFFER_SIZE`
[bsp] Adapt ls{1b,1c}dev to new mips common code LS1C selfboot feature have been rewiritten, and we changed bare boot base to 0x80000000 to better utilize memory. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> 2019-12-07 01:04:25 +08:00			`int "The rx buffer size"`
[bsp][ls1c] update config 2018-03-17 19:15:47 +08:00			`default 64 if RT_USING_SERIAL`
[bsp] Adapt ls{1b,1c}dev to new mips common code LS1C selfboot feature have been rewiritten, and we changed bare boot base to 0x80000000 to better utilize memory. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> 2019-12-07 01:04:25 +08:00			`default 64`
			`endif`
[BSP][ls1c]Add kconfig. 2018-02-09 09:25:20 +08:00
			`config RT_USING_GMAC_INT_MODE`
			`bool "Using RT_USING_GMAC_INT_MODE"`
			`default y`
[bsp] Adapt ls{1b,1c}dev to new mips common code LS1C selfboot feature have been rewiritten, and we changed bare boot base to 0x80000000 to better utilize memory. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> 2019-12-07 01:04:25 +08:00
[BSP][ls1c]Add kconfig. 2018-02-09 09:25:20 +08:00			`config RT_USING_SPI0`
[bsp][ls1c] update config 2018-03-17 19:15:47 +08:00			`bool "Enable SPI0"`
[BSP][ls1c]Add kconfig. 2018-02-09 09:25:20 +08:00			`select RT_USING_SPI`
[bsp] Adapt ls{1b,1c}dev to new mips common code LS1C selfboot feature have been rewiritten, and we changed bare boot base to 0x80000000 to better utilize memory. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> 2019-12-07 01:04:25 +08:00			`default y`
[BSP][ls1c]Add kconfig. 2018-02-09 09:25:20 +08:00
			`config RT_USING_SPI1`
[bsp][ls1c] update config 2018-03-17 19:15:47 +08:00			`bool "Enable SPI1"`
[BSP][ls1c]Add kconfig. 2018-02-09 09:25:20 +08:00			`select RT_USING_SPI`
[bsp] Adapt ls{1b,1c}dev to new mips common code LS1C selfboot feature have been rewiritten, and we changed bare boot base to 0x80000000 to better utilize memory. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> 2019-12-07 01:04:25 +08:00			`default y`

[bsp][ls1c] update config 2018-03-17 19:15:47 +08:00			`if RT_USING_I2C`
[BSP][ls1c]Add kconfig. 2018-02-09 09:25:20 +08:00			`config RT_USING_I2C1`
[bsp][ls1c] update config 2018-03-17 19:15:47 +08:00			`bool "Enable I2C1"`
			`default y`
[bsp] Adapt ls{1b,1c}dev to new mips common code LS1C selfboot feature have been rewiritten, and we changed bare boot base to 0x80000000 to better utilize memory. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> 2019-12-07 01:04:25 +08:00
[BSP][ls1c]Add kconfig. 2018-02-09 09:25:20 +08:00			`config RT_USING_I2C2`
[bsp] Adapt ls{1b,1c}dev to new mips common code LS1C selfboot feature have been rewiritten, and we changed bare boot base to 0x80000000 to better utilize memory. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> 2019-12-07 01:04:25 +08:00			`bool "Enable I2C2"`
			`default y`
[bsp][ls1c] update config 2018-03-17 19:15:47 +08:00			`endif`
[BSP][ls1c]Add kconfig. 2018-02-09 09:25:20 +08:00
[bsp] Adapt ls{1b,1c}dev to new mips common code LS1C selfboot feature have been rewiritten, and we changed bare boot base to 0x80000000 to better utilize memory. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> 2019-12-07 01:04:25 +08:00
[BSP][ls1c]Add kconfig. 2018-02-09 09:25:20 +08:00			`config USING_BXCAN0`
[bsp][ls1c] update config 2018-03-17 19:15:47 +08:00			`bool "Enable CAN0"`
[BSP][ls1c]Add kconfig. 2018-02-09 09:25:20 +08:00			`select RT_USING_CAN`
[bsp] Adapt ls{1b,1c}dev to new mips common code LS1C selfboot feature have been rewiritten, and we changed bare boot base to 0x80000000 to better utilize memory. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> 2019-12-07 01:04:25 +08:00			`default y`

[BSP][ls1c]Add kconfig. 2018-02-09 09:25:20 +08:00			`config USING_BXCAN1`
[bsp][ls1c] update config 2018-03-17 19:15:47 +08:00			`bool "Enable CAN1"`
[BSP][ls1c]Add kconfig. 2018-02-09 09:25:20 +08:00			`select RT_USING_CAN`
[bsp] Adapt ls{1b,1c}dev to new mips common code LS1C selfboot feature have been rewiritten, and we changed bare boot base to 0x80000000 to better utilize memory. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> 2019-12-07 01:04:25 +08:00			`default y`
[BSP][ls1c]Add kconfig. 2018-02-09 09:25:20 +08:00
[bsp][ls1c] update config 2018-03-17 19:15:47 +08:00			`if RT_USING_CAN`
			`config RT_CAN_USING_HDR`
			`bool "Using RT_CAN_USING_HDR"`
			`select RT_USING_CAN`
[bsp] Adapt ls{1b,1c}dev to new mips common code LS1C selfboot feature have been rewiritten, and we changed bare boot base to 0x80000000 to better utilize memory. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> 2019-12-07 01:04:25 +08:00			`default y`
			`endif`
[BSP][ls1c]Add kconfig. 2018-02-09 09:25:20 +08:00
[BSP][all ls1c]change license to Apache-2.0 [BSP][ls1c] add rtc library [BSP][ls1c] add pwm ,touch , rtc driver 2018-12-24 18:49:00 +08:00			`choice`
			`prompt "Touch format"`
			`default NO_TOUCH`

			`config NO_TOUCH`
[bsp] Adapt ls{1b,1c}dev to new mips common code LS1C selfboot feature have been rewiritten, and we changed bare boot base to 0x80000000 to better utilize memory. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> 2019-12-07 01:04:25 +08:00			`bool "with no touch"`

[BSP][all ls1c]change license to Apache-2.0 [BSP][ls1c] add rtc library [BSP][ls1c] add pwm ,touch , rtc driver 2018-12-24 18:49:00 +08:00			`if RT_USING_RTGUI`
			`config XPT2046_USING_TOUCH`
			`bool "with XPT2046 touch"`
[bsp] Adapt ls{1b,1c}dev to new mips common code LS1C selfboot feature have been rewiritten, and we changed bare boot base to 0x80000000 to better utilize memory. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> 2019-12-07 01:04:25 +08:00			`endif`
[BSP][all ls1c]change license to Apache-2.0 [BSP][ls1c] add rtc library [BSP][ls1c] add pwm ,touch , rtc driver 2018-12-24 18:49:00 +08:00
			`config TINA_USING_TOUCH`
[bsp] Adapt ls{1b,1c}dev to new mips common code LS1C selfboot feature have been rewiritten, and we changed bare boot base to 0x80000000 to better utilize memory. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> 2019-12-07 01:04:25 +08:00			`bool "with TINA touch"`
[BSP][all ls1c]change license to Apache-2.0 [BSP][ls1c] add rtc library [BSP][ls1c] add pwm ,touch , rtc driver 2018-12-24 18:49:00 +08:00			`endchoice`

			`if RT_USING_RTC`
			`config RT_RTC_NAME`
			`string "RT_RTC_NAME"`
[bsp] Adapt ls{1b,1c}dev to new mips common code LS1C selfboot feature have been rewiritten, and we changed bare boot base to 0x80000000 to better utilize memory. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> 2019-12-07 01:04:25 +08:00			`default "RTC"`
			`endif`
[BSP][all ls1c]change license to Apache-2.0 [BSP][ls1c] add rtc library [BSP][ls1c] add pwm ,touch , rtc driver 2018-12-24 18:49:00 +08:00