rt-thread/bsp/tm4c129x/libraries/inc/hw_memmap.h

//*****************************************************************************
//
// hw_memmap.h - Macros defining the memory map of the device.
//
// Copyright (c) 2005-2020 Texas Instruments Incorporated.  All rights reserved.
// Software License Agreement
//
//   Redistribution and use in source and binary forms, with or without
//   modification, are permitted provided that the following conditions
//   are met:
//
//   Redistributions of source code must retain the above copyright
//   notice, this list of conditions and the following disclaimer.
//
//   Redistributions in binary form must reproduce the above copyright
//   notice, this list of conditions and the following disclaimer in the
//   documentation and/or other materials provided with the
//   distribution.
//
//   Neither the name of Texas Instruments Incorporated nor the names of
//   its contributors may be used to endorse or promote products derived
//   from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
// This is part of revision 2.2.0.295 of the Tiva Firmware Development Package.
//
//*****************************************************************************

#ifndef __HW_MEMMAP_H__
#define __HW_MEMMAP_H__

//*****************************************************************************
//
// The following are defines for the base address of the memories and
// peripherals.
//
//*****************************************************************************
#define FLASH_BASE              0x00000000  // FLASH memory
#define SRAM_BASE               0x20000000  // SRAM memory
#define WATCHDOG0_BASE          0x40000000  // Watchdog0
#define WATCHDOG1_BASE          0x40001000  // Watchdog1
#define GPIO_PORTA_BASE         0x40004000  // GPIO Port A
#define GPIO_PORTB_BASE         0x40005000  // GPIO Port B
#define GPIO_PORTC_BASE         0x40006000  // GPIO Port C
#define GPIO_PORTD_BASE         0x40007000  // GPIO Port D
#define SSI0_BASE               0x40008000  // SSI0
#define SSI1_BASE               0x40009000  // SSI1
#define SSI2_BASE               0x4000A000  // SSI2
#define SSI3_BASE               0x4000B000  // SSI3
#define UART0_BASE              0x4000C000  // UART0
#define UART1_BASE              0x4000D000  // UART1
#define UART2_BASE              0x4000E000  // UART2
#define UART3_BASE              0x4000F000  // UART3
#define UART4_BASE              0x40010000  // UART4
#define UART5_BASE              0x40011000  // UART5
#define UART6_BASE              0x40012000  // UART6
#define UART7_BASE              0x40013000  // UART7
#define I2C0_BASE               0x40020000  // I2C0
#define I2C1_BASE               0x40021000  // I2C1
#define I2C2_BASE               0x40022000  // I2C2
#define I2C3_BASE               0x40023000  // I2C3
#define GPIO_PORTE_BASE         0x40024000  // GPIO Port E
#define GPIO_PORTF_BASE         0x40025000  // GPIO Port F
#define GPIO_PORTG_BASE         0x40026000  // GPIO Port G
#define GPIO_PORTH_BASE         0x40027000  // GPIO Port H
#define PWM0_BASE               0x40028000  // Pulse Width Modulator (PWM)
#define PWM1_BASE               0x40029000  // Pulse Width Modulator (PWM)
#define QEI0_BASE               0x4002C000  // QEI0
#define QEI1_BASE               0x4002D000  // QEI1
#define TIMER0_BASE             0x40030000  // Timer0
#define TIMER1_BASE             0x40031000  // Timer1
#define TIMER2_BASE             0x40032000  // Timer2
#define TIMER3_BASE             0x40033000  // Timer3
#define TIMER4_BASE             0x40034000  // Timer4
#define TIMER5_BASE             0x40035000  // Timer5
#define WTIMER0_BASE            0x40036000  // Wide Timer0
#define WTIMER1_BASE            0x40037000  // Wide Timer1
#define ADC0_BASE               0x40038000  // ADC0
#define ADC1_BASE               0x40039000  // ADC1
#define COMP_BASE               0x4003C000  // Analog comparators
#define GPIO_PORTJ_BASE         0x4003D000  // GPIO Port J
#define CAN0_BASE               0x40040000  // CAN0
#define CAN1_BASE               0x40041000  // CAN1
#define WTIMER2_BASE            0x4004C000  // Wide Timer2
#define WTIMER3_BASE            0x4004D000  // Wide Timer3
#define WTIMER4_BASE            0x4004E000  // Wide Timer4
#define WTIMER5_BASE            0x4004F000  // Wide Timer5
#define USB0_BASE               0x40050000  // USB 0 Controller
#define GPIO_PORTA_AHB_BASE     0x40058000  // GPIO Port A (high speed)
#define GPIO_PORTB_AHB_BASE     0x40059000  // GPIO Port B (high speed)
#define GPIO_PORTC_AHB_BASE     0x4005A000  // GPIO Port C (high speed)
#define GPIO_PORTD_AHB_BASE     0x4005B000  // GPIO Port D (high speed)
#define GPIO_PORTE_AHB_BASE     0x4005C000  // GPIO Port E (high speed)
#define GPIO_PORTF_AHB_BASE     0x4005D000  // GPIO Port F (high speed)
#define GPIO_PORTG_AHB_BASE     0x4005E000  // GPIO Port G (high speed)
#define GPIO_PORTH_AHB_BASE     0x4005F000  // GPIO Port H (high speed)
#define GPIO_PORTJ_AHB_BASE     0x40060000  // GPIO Port J (high speed)
#define GPIO_PORTK_BASE         0x40061000  // GPIO Port K
#define GPIO_PORTL_BASE         0x40062000  // GPIO Port L
#define GPIO_PORTM_BASE         0x40063000  // GPIO Port M
#define GPIO_PORTN_BASE         0x40064000  // GPIO Port N
#define GPIO_PORTP_BASE         0x40065000  // GPIO Port P
#define GPIO_PORTQ_BASE         0x40066000  // GPIO Port Q
#define GPIO_PORTR_BASE         0x40067000  // General-Purpose Input/Outputs
                                            // (GPIOs)
#define GPIO_PORTS_BASE         0x40068000  // General-Purpose Input/Outputs
                                            // (GPIOs)
#define GPIO_PORTT_BASE         0x40069000  // General-Purpose Input/Outputs
                                            // (GPIOs)
#define EEPROM_BASE             0x400AF000  // EEPROM memory
#define ONEWIRE0_BASE           0x400B6000  // 1-Wire Master Module
#define I2C8_BASE               0x400B8000  // I2C8
#define I2C9_BASE               0x400B9000  // I2C9
#define I2C4_BASE               0x400C0000  // I2C4
#define I2C5_BASE               0x400C1000  // I2C5
#define I2C6_BASE               0x400C2000  // I2C6
#define I2C7_BASE               0x400C3000  // I2C7
#define EPI0_BASE               0x400D0000  // EPI0
#define TIMER6_BASE             0x400E0000  // General-Purpose Timers
#define TIMER7_BASE             0x400E1000  // General-Purpose Timers
#define EMAC0_BASE              0x400EC000  // Ethernet Controller
#define SYSEXC_BASE             0x400F9000  // System Exception Module
#define HIB_BASE                0x400FC000  // Hibernation Module
#define FLASH_CTRL_BASE         0x400FD000  // FLASH Controller
#define SYSCTL_BASE             0x400FE000  // System Control
#define UDMA_BASE               0x400FF000  // uDMA Controller
#define CCM0_BASE               0x44030000  // Cyclical Redundancy Check (CRC)
#define SHAMD5_BASE             0x44034000  // SHA/MD5 Accelerator
#define AES_BASE                0x44036000  // Advance Encryption
                                            // Hardware-Accelerated Module
#define DES_BASE                0x44038000  // Data Encryption Standard
                                            // Accelerator (DES)
#define LCD0_BASE               0x44050000  // LCD Controller
#define ITM_BASE                0xE0000000  // Instrumentation Trace Macrocell
#define DWT_BASE                0xE0001000  // Data Watchpoint and Trace
#define FPB_BASE                0xE0002000  // FLASH Patch and Breakpoint
#define NVIC_BASE               0xE000E000  // Nested Vectored Interrupt Ctrl
#define TPIU_BASE               0xE0040000  // Trace Port Interface Unit

#endif // __HW_MEMMAP_H__