libs/rt-thread
libs
/
rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
rt-thread/bsp/lpc54114-lite/Libraries/devices/LPC54114/drivers/fsl_spi.c

865 lines
29 KiB
C
Raw Normal View History

[bsp]add bsp lpc54114-lite
2018-12-05 11:44:53 +08:00
/*
* The Clear BSD License
* Copyright (c) 2016, Freescale Semiconductor, Inc.
* Copyright 2016-2017 NXP
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted (subject to the limitations in the disclaimer below) provided
* that the following conditions are met:
*
* o Redistributions of source code must retain the above copyright notice, this list
* of conditions and the following disclaimer.
*
* o Redistributions in binary form must reproduce the above copyright notice, this
* list of conditions and the following disclaimer in the documentation and/or
* other materials provided with the distribution.
*
* o Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED BY THIS LICENSE.
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "fsl_spi.h"
#include "fsl_flexcomm.h"
/*******************************************************************************
* Definitions
******************************************************************************/
/* Component ID definition, used by tools. */
#ifndef FSL_COMPONENT_ID
#define FSL_COMPONENT_ID "platform.drivers.flexcomm_spi"
#endif
/* Note: FIFOCFG[SIZE] has always value 1 = 8 items depth */
#define SPI_FIFO_DEPTH(base) ((((base)->FIFOCFG & SPI_FIFOCFG_SIZE_MASK) >> SPI_FIFOCFG_SIZE_SHIFT) << 3)
/* Convert transfer count to transfer bytes. dataWidth is a
* range <0,15>. Range <8,15> represents 2B transfer */
#define SPI_COUNT_TO_BYTES(dataWidth, count) ((count) << ((dataWidth) >> 3U))
#define SPI_BYTES_TO_COUNT(dataWidth, bytes) ((bytes) >> ((dataWidth) >> 3U))
#define SPI_SSELPOL_MASK ((SPI_CFG_SPOL0_MASK) | (SPI_CFG_SPOL1_MASK) | (SPI_CFG_SPOL2_MASK) | (SPI_CFG_SPOL3_MASK))
/*******************************************************************************
* Variables
******************************************************************************/
/*! @brief internal SPI config array */
static spi_config_t g_configs[FSL_FEATURE_SOC_SPI_COUNT] = {(spi_data_width_t)0};
/*! @brief Array to map SPI instance number to base address. */
static const uint32_t s_spiBaseAddrs[FSL_FEATURE_SOC_SPI_COUNT] = SPI_BASE_ADDRS;
/*! @brief IRQ name array */
static const IRQn_Type s_spiIRQ[] = SPI_IRQS;
/* @brief Dummy data for each instance. This data is used when user's tx buffer is NULL*/
volatile uint8_t s_dummyData[FSL_FEATURE_SOC_SPI_COUNT] = {0};
/*******************************************************************************
* Code
******************************************************************************/
/* Get the index corresponding to the FLEXCOMM */
uint32_t SPI_GetInstance(SPI_Type *base)
{
int i;
for (i = 0; i < FSL_FEATURE_SOC_SPI_COUNT; i++)
{
if ((uint32_t)base == s_spiBaseAddrs[i])
{
return i;
}
}
assert(false);
return 0;
}
void SPI_SetDummyData(SPI_Type *base, uint8_t dummyData)
{
uint32_t instance = SPI_GetInstance(base);
s_dummyData[instance] = dummyData;
}
void *SPI_GetConfig(SPI_Type *base)
{
int32_t instance;
instance = SPI_GetInstance(base);
if (instance < 0)
{
return NULL;
}
return &g_configs[instance];
}
void SPI_MasterGetDefaultConfig(spi_master_config_t *config)
{
assert(NULL != config);
config->enableLoopback = false;
config->enableMaster = true;
config->polarity = kSPI_ClockPolarityActiveHigh;
config->phase = kSPI_ClockPhaseFirstEdge;
config->direction = kSPI_MsbFirst;
config->baudRate_Bps = 500000U;
config->dataWidth = kSPI_Data8Bits;
config->sselNum = kSPI_Ssel0;
config->txWatermark = kSPI_TxFifo0;
config->rxWatermark = kSPI_RxFifo1;
config->sselPol = kSPI_SpolActiveAllLow;
config->delayConfig.preDelay = 0U;
config->delayConfig.postDelay = 0U;
config->delayConfig.frameDelay = 0U;
config->delayConfig.transferDelay = 0U;
}
status_t SPI_MasterInit(SPI_Type *base, const spi_master_config_t *config, uint32_t srcClock_Hz)
{
int32_t result = 0, instance = 0;
uint32_t tmp;
/* assert params */
assert(!((NULL == base) || (NULL == config) || (0 == srcClock_Hz)));
if ((NULL == base) || (NULL == config) || (0 == srcClock_Hz))
{
return kStatus_InvalidArgument;
}
/* initialize flexcomm to SPI mode */
result = FLEXCOMM_Init(base, FLEXCOMM_PERIPH_SPI);
assert(kStatus_Success == result);
if (kStatus_Success != result)
{
return result;
}
/* set divider */
result = SPI_MasterSetBaud(base, config->baudRate_Bps, srcClock_Hz);
if (kStatus_Success != result)
{
return result;
}
/* get instance number */
instance = SPI_GetInstance(base);
assert(instance >= 0);
/* configure SPI mode */
tmp = base->CFG;
tmp &= ~(SPI_CFG_MASTER_MASK | SPI_CFG_LSBF_MASK | SPI_CFG_CPHA_MASK | SPI_CFG_CPOL_MASK | SPI_CFG_LOOP_MASK |
SPI_CFG_ENABLE_MASK | SPI_SSELPOL_MASK);
/* phase */
tmp |= SPI_CFG_CPHA(config->phase);
/* polarity */
tmp |= SPI_CFG_CPOL(config->polarity);
/* direction */
tmp |= SPI_CFG_LSBF(config->direction);
/* master mode */
tmp |= SPI_CFG_MASTER(1);
/* loopback */
tmp |= SPI_CFG_LOOP(config->enableLoopback);
/* configure active level for all CS */
tmp |= ((uint32_t)config->sselPol & (SPI_SSELPOL_MASK));
base->CFG = tmp;
/* store configuration */
g_configs[instance].dataWidth = config->dataWidth;
g_configs[instance].sselNum = config->sselNum;
/* enable FIFOs */
base->FIFOCFG |= SPI_FIFOCFG_EMPTYTX_MASK | SPI_FIFOCFG_EMPTYRX_MASK;
base->FIFOCFG |= SPI_FIFOCFG_ENABLETX_MASK | SPI_FIFOCFG_ENABLERX_MASK;
/* trigger level - empty txFIFO, one item in rxFIFO */
tmp = base->FIFOTRIG & (~(SPI_FIFOTRIG_RXLVL_MASK | SPI_FIFOTRIG_TXLVL_MASK));
tmp |= SPI_FIFOTRIG_TXLVL(config->txWatermark) | SPI_FIFOTRIG_RXLVL(config->rxWatermark);
/* enable generating interrupts for FIFOTRIG levels */
tmp |= SPI_FIFOTRIG_TXLVLENA_MASK | SPI_FIFOTRIG_RXLVLENA_MASK;
/* set FIFOTRIG */
base->FIFOTRIG = tmp;
/* Set the delay configuration. */
SPI_SetTransferDelay(base, &config->delayConfig);
/* Set the dummy data. */
SPI_SetDummyData(base, (uint8_t)SPI_DUMMYDATA);
SPI_Enable(base, config->enableMaster);
return kStatus_Success;
}
void SPI_SlaveGetDefaultConfig(spi_slave_config_t *config)
{
assert(NULL != config);
config->enableSlave = true;
config->polarity = kSPI_ClockPolarityActiveHigh;
config->phase = kSPI_ClockPhaseFirstEdge;
config->direction = kSPI_MsbFirst;
config->dataWidth = kSPI_Data8Bits;
config->txWatermark = kSPI_TxFifo0;
config->rxWatermark = kSPI_RxFifo1;
config->sselPol = kSPI_SpolActiveAllLow;
}
status_t SPI_SlaveInit(SPI_Type *base, const spi_slave_config_t *config)
{
int32_t result = 0, instance;
uint32_t tmp;
/* assert params */
assert(!((NULL == base) || (NULL == config)));
if ((NULL == base) || (NULL == config))
{
return kStatus_InvalidArgument;
}
/* configure flexcomm to SPI, enable clock gate */
result = FLEXCOMM_Init(base, FLEXCOMM_PERIPH_SPI);
assert(kStatus_Success == result);
if (kStatus_Success != result)
{
return result;
}
instance = SPI_GetInstance(base);
/* configure SPI mode */
tmp = base->CFG;
tmp &= ~(SPI_CFG_MASTER_MASK | SPI_CFG_LSBF_MASK | SPI_CFG_CPHA_MASK | SPI_CFG_CPOL_MASK | SPI_CFG_ENABLE_MASK |
SPI_SSELPOL_MASK);
/* phase */
tmp |= SPI_CFG_CPHA(config->phase);
/* polarity */
tmp |= SPI_CFG_CPOL(config->polarity);
/* direction */
tmp |= SPI_CFG_LSBF(config->direction);
/* configure active level for all CS */
tmp |= ((uint32_t)config->sselPol & (SPI_SSELPOL_MASK));
base->CFG = tmp;
/* store configuration */
g_configs[instance].dataWidth = config->dataWidth;
/* empty and enable FIFOs */
base->FIFOCFG |= SPI_FIFOCFG_EMPTYTX_MASK | SPI_FIFOCFG_EMPTYRX_MASK;
base->FIFOCFG |= SPI_FIFOCFG_ENABLETX_MASK | SPI_FIFOCFG_ENABLERX_MASK;
/* trigger level - empty txFIFO, one item in rxFIFO */
tmp = base->FIFOTRIG & (~(SPI_FIFOTRIG_RXLVL_MASK | SPI_FIFOTRIG_TXLVL_MASK));
tmp |= SPI_FIFOTRIG_TXLVL(config->txWatermark) | SPI_FIFOTRIG_RXLVL(config->rxWatermark);
/* enable generating interrupts for FIFOTRIG levels */
tmp |= SPI_FIFOTRIG_TXLVLENA_MASK | SPI_FIFOTRIG_RXLVLENA_MASK;
/* set FIFOTRIG */
base->FIFOTRIG = tmp;
SPI_SetDummyData(base, (uint8_t)SPI_DUMMYDATA);
SPI_Enable(base, config->enableSlave);
return kStatus_Success;
}
void SPI_Deinit(SPI_Type *base)
{
/* Assert arguments */
assert(NULL != base);
/* Disable interrupts, disable dma requests, disable peripheral */
base->FIFOINTENCLR = SPI_FIFOINTENCLR_TXERR_MASK | SPI_FIFOINTENCLR_RXERR_MASK | SPI_FIFOINTENCLR_TXLVL_MASK |
SPI_FIFOINTENCLR_RXLVL_MASK;
base->FIFOCFG &= ~(SPI_FIFOCFG_DMATX_MASK | SPI_FIFOCFG_DMARX_MASK);
base->CFG &= ~(SPI_CFG_ENABLE_MASK);
}
void SPI_EnableTxDMA(SPI_Type *base, bool enable)
{
if (enable)
{
base->FIFOCFG |= SPI_FIFOCFG_DMATX_MASK;
}
else
{
base->FIFOCFG &= ~SPI_FIFOCFG_DMATX_MASK;
}
}
void SPI_EnableRxDMA(SPI_Type *base, bool enable)
{
if (enable)
{
base->FIFOCFG |= SPI_FIFOCFG_DMARX_MASK;
}
else
{
base->FIFOCFG &= ~SPI_FIFOCFG_DMARX_MASK;
}
}
status_t SPI_MasterSetBaud(SPI_Type *base, uint32_t baudrate_Bps, uint32_t srcClock_Hz)
{
uint32_t tmp;
/* assert params */
assert(!((NULL == base) || (0 == baudrate_Bps) || (0 == srcClock_Hz)));
if ((NULL == base) || (0 == baudrate_Bps) || (0 == srcClock_Hz))
{
return kStatus_InvalidArgument;
}
/* calculate baudrate */
tmp = (srcClock_Hz / baudrate_Bps) - 1;
if (tmp > 0xFFFF)
{
return kStatus_SPI_BaudrateNotSupport;
}
base->DIV &= ~SPI_DIV_DIVVAL_MASK;
base->DIV |= SPI_DIV_DIVVAL(tmp);
return kStatus_Success;
}
void SPI_WriteData(SPI_Type *base, uint16_t data, uint32_t configFlags)
{
uint32_t control = 0;
int32_t instance;
/* check params */
assert(NULL != base);
/* get and check instance */
instance = SPI_GetInstance(base);
assert(!(instance < 0));
if (instance < 0)
{
return;
}
/* set data width */
control |= SPI_FIFOWR_LEN(g_configs[instance].dataWidth);
/* set sssel */
control |= (SPI_DEASSERT_ALL & (~SPI_DEASSERTNUM_SSEL(g_configs[instance].sselNum)));
/* mask configFlags */
control |= (configFlags & SPI_FIFOWR_FLAGS_MASK);
/* control should not affect lower 16 bits */
assert(!(control & 0xFFFF));
base->FIFOWR = data | control;
}
status_t SPI_MasterTransferCreateHandle(SPI_Type *base,
spi_master_handle_t *handle,
spi_master_callback_t callback,
void *userData)
{
int32_t instance = 0;
/* check 'base' */
assert(!(NULL == base));
if (NULL == base)
{
return kStatus_InvalidArgument;
}
/* check 'handle' */
assert(!(NULL == handle));
if (NULL == handle)
{
return kStatus_InvalidArgument;
}
/* get flexcomm instance by 'base' param */
instance = SPI_GetInstance(base);
assert(!(instance < 0));
if (instance < 0)
{
return kStatus_InvalidArgument;
}
memset(handle, 0, sizeof(*handle));
/* Initialize the handle */
if (base->CFG & SPI_CFG_MASTER_MASK)
{
FLEXCOMM_SetIRQHandler(base, (flexcomm_irq_handler_t)SPI_MasterTransferHandleIRQ, handle);
}
else
{
FLEXCOMM_SetIRQHandler(base, (flexcomm_irq_handler_t)SPI_SlaveTransferHandleIRQ, handle);
}
handle->dataWidth = g_configs[instance].dataWidth;
/* in slave mode, the sselNum is not important */
handle->sselNum = g_configs[instance].sselNum;
handle->txWatermark = (spi_txfifo_watermark_t)SPI_FIFOTRIG_TXLVL_GET(base);
handle->rxWatermark = (spi_rxfifo_watermark_t)SPI_FIFOTRIG_RXLVL_GET(base);
handle->callback = callback;
handle->userData = userData;
/* Enable SPI NVIC */
EnableIRQ(s_spiIRQ[instance]);
return kStatus_Success;
}
status_t SPI_MasterTransferBlocking(SPI_Type *base, spi_transfer_t *xfer)
{
int32_t instance;
uint32_t tx_ctrl = 0, last_ctrl = 0;
uint32_t tmp32, rxRemainingBytes, txRemainingBytes, dataWidth;
uint32_t toReceiveCount = 0;
uint8_t *txData, *rxData;
uint32_t fifoDepth;
/* check params */
[更新] 添加i2c spi romfs spiflash sdcard pct2075驱动.
2018-12-05 19:04:47 +08:00
// assert(!((NULL == base) || (NULL == xfer) || ((NULL == xfer->txData) && (NULL == xfer->rxData))));
[bsp]add bsp lpc54114-lite
2018-12-05 11:44:53 +08:00
if ((NULL == base) || (NULL == xfer) || ((NULL == xfer->txData) && (NULL == xfer->rxData)))
{
return kStatus_InvalidArgument;
}
fifoDepth = SPI_FIFO_DEPTH(base);
txData = xfer->txData;
rxData = xfer->rxData;
txRemainingBytes = txData ? xfer->dataSize : 0;
rxRemainingBytes = rxData ? xfer->dataSize : 0;
instance = SPI_GetInstance(base);
assert(instance >= 0);
dataWidth = g_configs[instance].dataWidth;
/* dataSize (in bytes) is not aligned to 16bit (2B) transfer */
assert(!((dataWidth > kSPI_Data8Bits) && (xfer->dataSize & 0x1)));
if ((dataWidth > kSPI_Data8Bits) && (xfer->dataSize & 0x1))
{
return kStatus_InvalidArgument;
}
/* clear tx/rx errors and empty FIFOs */
base->FIFOCFG |= SPI_FIFOCFG_EMPTYTX_MASK | SPI_FIFOCFG_EMPTYRX_MASK;
base->FIFOSTAT |= SPI_FIFOSTAT_TXERR_MASK | SPI_FIFOSTAT_RXERR_MASK;
/* select slave to talk with */
tx_ctrl |= (SPI_DEASSERT_ALL & (~SPI_DEASSERTNUM_SSEL(g_configs[instance].sselNum)));
/* set width of data - range asserted at entry */
tx_ctrl |= SPI_FIFOWR_LEN(dataWidth);
/* delay for frames */
tx_ctrl |= (xfer->configFlags & (uint32_t)kSPI_FrameDelay) ? (uint32_t)kSPI_FrameDelay : 0;
/* end of transfer */
last_ctrl |= (xfer->configFlags & (uint32_t)kSPI_FrameAssert) ? (uint32_t)kSPI_FrameAssert : 0;
/* last index of loop */
while (txRemainingBytes || rxRemainingBytes || toReceiveCount)
{
/* if rxFIFO is not empty */
if (base->FIFOSTAT & SPI_FIFOSTAT_RXNOTEMPTY_MASK)
{
tmp32 = base->FIFORD;
/* rxBuffer is not empty */
if (rxRemainingBytes)
{
*(rxData++) = tmp32;
rxRemainingBytes--;
/* read 16 bits at once */
if (dataWidth > 8)
{
*(rxData++) = tmp32 >> 8;
rxRemainingBytes--;
}
}
/* decrease number of data expected to receive */
toReceiveCount -= 1;
}
/* transmit if txFIFO is not full and data to receive does not exceed FIFO depth */
if ((base->FIFOSTAT & SPI_FIFOSTAT_TXNOTFULL_MASK) && (toReceiveCount < fifoDepth) &&
((txRemainingBytes) || (rxRemainingBytes >= SPI_COUNT_TO_BYTES(dataWidth, toReceiveCount + 1))))
{
/* txBuffer is not empty */
if (txRemainingBytes)
{
tmp32 = *(txData++);
txRemainingBytes--;
/* write 16 bit at once */
if (dataWidth > 8)
{
tmp32 |= ((uint32_t)(*(txData++))) << 8U;
txRemainingBytes--;
}
if (!txRemainingBytes)
{
tx_ctrl |= last_ctrl;
}
}
else
{
tmp32 = ((uint32_t)s_dummyData[instance] << 8U | (s_dummyData[instance]));
/* last transfer */
if (rxRemainingBytes == SPI_COUNT_TO_BYTES(dataWidth, toReceiveCount + 1))
{
tx_ctrl |= last_ctrl;
}
}
/* send data */
tmp32 = tx_ctrl | tmp32;
base->FIFOWR = tmp32;
toReceiveCount += 1;
}
}
/* wait if TX FIFO of previous transfer is not empty */
while (!(base->FIFOSTAT & SPI_FIFOSTAT_TXEMPTY_MASK))
{
}
return kStatus_Success;
}
status_t SPI_MasterTransferNonBlocking(SPI_Type *base, spi_master_handle_t *handle, spi_transfer_t *xfer)
{
/* check params */
assert(
!((NULL == base) || (NULL == handle) || (NULL == xfer) || ((NULL == xfer->txData) && (NULL == xfer->rxData))));
if ((NULL == base) || (NULL == handle) || (NULL == xfer) || ((NULL == xfer->txData) && (NULL == xfer->rxData)))
{
return kStatus_InvalidArgument;
}
/* dataSize (in bytes) is not aligned to 16bit (2B) transfer */
assert(!((handle->dataWidth > kSPI_Data8Bits) && (xfer->dataSize & 0x1)));
if ((handle->dataWidth > kSPI_Data8Bits) && (xfer->dataSize & 0x1))
{
return kStatus_InvalidArgument;
}
/* Check if SPI is busy */
if (handle->state == kStatus_SPI_Busy)
{
return kStatus_SPI_Busy;
}
/* Set the handle information */
handle->txData = xfer->txData;
handle->rxData = xfer->rxData;
/* set count */
handle->txRemainingBytes = xfer->txData ? xfer->dataSize : 0;
handle->rxRemainingBytes = xfer->rxData ? xfer->dataSize : 0;
handle->totalByteCount = xfer->dataSize;
/* other options */
handle->toReceiveCount = 0;
handle->configFlags = xfer->configFlags;
/* Set the SPI state to busy */
handle->state = kStatus_SPI_Busy;
/* clear FIFOs when transfer starts */
base->FIFOCFG |= SPI_FIFOCFG_EMPTYTX_MASK | SPI_FIFOCFG_EMPTYRX_MASK;
base->FIFOSTAT |= SPI_FIFOSTAT_TXERR_MASK | SPI_FIFOSTAT_RXERR_MASK;
/* enable generating txIRQ and rxIRQ, first transfer is fired by empty txFIFO */
base->FIFOINTENSET |= SPI_FIFOINTENSET_TXLVL_MASK | SPI_FIFOINTENSET_RXLVL_MASK;
return kStatus_Success;
}
status_t SPI_MasterHalfDuplexTransferBlocking(SPI_Type *base, spi_half_duplex_transfer_t *xfer)
{
assert(xfer);
spi_transfer_t tempXfer = {0};
status_t status;
if (xfer->isTransmitFirst)
{
tempXfer.txData = xfer->txData;
tempXfer.rxData = NULL;
tempXfer.dataSize = xfer->txDataSize;
}
else
{
tempXfer.txData = NULL;
tempXfer.rxData = xfer->rxData;
tempXfer.dataSize = xfer->rxDataSize;
}
/* If the pcs pin keep assert between transmit and receive. */
if (xfer->isPcsAssertInTransfer)
{
tempXfer.configFlags = (xfer->configFlags) & (uint32_t)(~kSPI_FrameAssert);
}
else
{
tempXfer.configFlags = (xfer->configFlags) | kSPI_FrameAssert;
}
status = SPI_MasterTransferBlocking(base, &tempXfer);
if (status != kStatus_Success)
{
return status;
}
if (xfer->isTransmitFirst)
{
tempXfer.txData = NULL;
tempXfer.rxData = xfer->rxData;
tempXfer.dataSize = xfer->rxDataSize;
}
else
{
tempXfer.txData = xfer->txData;
tempXfer.rxData = NULL;
tempXfer.dataSize = xfer->txDataSize;
}
tempXfer.configFlags = xfer->configFlags;
/* SPI transfer blocking. */
status = SPI_MasterTransferBlocking(base, &tempXfer);
return status;
}
status_t SPI_MasterHalfDuplexTransferNonBlocking(SPI_Type *base,
spi_master_handle_t *handle,
spi_half_duplex_transfer_t *xfer)
{
assert(xfer);
assert(handle);
spi_transfer_t tempXfer = {0};
status_t status;
if (xfer->isTransmitFirst)
{
tempXfer.txData = xfer->txData;
tempXfer.rxData = NULL;
tempXfer.dataSize = xfer->txDataSize;
}
else
{
tempXfer.txData = NULL;
tempXfer.rxData = xfer->rxData;
tempXfer.dataSize = xfer->rxDataSize;
}
/* If the PCS pin keep assert between transmit and receive. */
if (xfer->isPcsAssertInTransfer)
{
tempXfer.configFlags = (xfer->configFlags) & (uint32_t)(~kSPI_FrameAssert);
}
else
{
tempXfer.configFlags = (xfer->configFlags) | kSPI_FrameAssert;
}
status = SPI_MasterTransferBlocking(base, &tempXfer);
if (status != kStatus_Success)
{
return status;
}
if (xfer->isTransmitFirst)
{
tempXfer.txData = NULL;
tempXfer.rxData = xfer->rxData;
tempXfer.dataSize = xfer->rxDataSize;
}
else
{
tempXfer.txData = xfer->txData;
tempXfer.rxData = NULL;
tempXfer.dataSize = xfer->txDataSize;
}
tempXfer.configFlags = xfer->configFlags;
status = SPI_MasterTransferNonBlocking(base, handle, &tempXfer);
return status;
}
status_t SPI_MasterTransferGetCount(SPI_Type *base, spi_master_handle_t *handle, size_t *count)
{
assert(NULL != handle);
if (!count)
{
return kStatus_InvalidArgument;
}
/* Catch when there is not an active transfer. */
if (handle->state != kStatus_SPI_Busy)
{
*count = 0;
return kStatus_NoTransferInProgress;
}
*count = handle->totalByteCount - handle->rxRemainingBytes;
return kStatus_Success;
}
void SPI_MasterTransferAbort(SPI_Type *base, spi_master_handle_t *handle)
{
assert(NULL != handle);
/* Disable interrupt requests*/
base->FIFOINTENSET &= ~(SPI_FIFOINTENSET_TXLVL_MASK | SPI_FIFOINTENSET_RXLVL_MASK);
/* Empty FIFOs */
base->FIFOCFG |= SPI_FIFOCFG_EMPTYTX_MASK | SPI_FIFOCFG_EMPTYRX_MASK;
handle->state = kStatus_SPI_Idle;
handle->txRemainingBytes = 0;
handle->rxRemainingBytes = 0;
}
static void SPI_TransferHandleIRQInternal(SPI_Type *base, spi_master_handle_t *handle)
{
uint32_t tx_ctrl = 0, last_ctrl = 0, tmp32;
bool loopContinue;
uint32_t fifoDepth;
/* Get flexcomm instance by 'base' param */
uint32_t instance = SPI_GetInstance(base);
/* check params */
assert((NULL != base) && (NULL != handle) && ((NULL != handle->txData) || (NULL != handle->rxData)));
fifoDepth = SPI_FIFO_DEPTH(base);
/* select slave to talk with */
tx_ctrl |= (SPI_DEASSERT_ALL & SPI_ASSERTNUM_SSEL(handle->sselNum));
/* set width of data */
tx_ctrl |= SPI_FIFOWR_LEN(handle->dataWidth);
/* delay for frames */
tx_ctrl |= (handle->configFlags & (uint32_t)kSPI_FrameDelay) ? (uint32_t)kSPI_FrameDelay : 0;
/* end of transfer */
last_ctrl |= (handle->configFlags & (uint32_t)kSPI_FrameAssert) ? (uint32_t)kSPI_FrameAssert : 0;
do
{
loopContinue = false;
/* rxFIFO is not empty */
if (base->FIFOSTAT & SPI_FIFOSTAT_RXNOTEMPTY_MASK)
{
tmp32 = base->FIFORD;
/* rxBuffer is not empty */
if (handle->rxRemainingBytes)
{
/* low byte must go first */
*(handle->rxData++) = tmp32;
handle->rxRemainingBytes--;
/* read 16 bits at once */
if (handle->dataWidth > kSPI_Data8Bits)
{
*(handle->rxData++) = tmp32 >> 8;
handle->rxRemainingBytes--;
}
}
/* decrease number of data expected to receive */
handle->toReceiveCount -= 1;
loopContinue = true;
}
/* - txFIFO is not full
* - we cannot cause rxFIFO overflow by sending more data than is the depth of FIFO
* - txBuffer is not empty or the next 'toReceiveCount' data can fit into rxBuffer
*/
if ((base->FIFOSTAT & SPI_FIFOSTAT_TXNOTFULL_MASK) && (handle->toReceiveCount < fifoDepth) &&
((handle->txRemainingBytes) ||
(handle->rxRemainingBytes >= SPI_COUNT_TO_BYTES(handle->dataWidth, handle->toReceiveCount + 1))))
{
/* txBuffer is not empty */
if (handle->txRemainingBytes)
{
/* low byte must go first */
tmp32 = *(handle->txData++);
handle->txRemainingBytes--;
/* write 16 bit at once */
if (handle->dataWidth > kSPI_Data8Bits)
{
tmp32 |= ((uint32_t)(*(handle->txData++))) << 8U;
handle->txRemainingBytes--;
}
/* last transfer */
if (!handle->txRemainingBytes)
{
tx_ctrl |= last_ctrl;
}
}
else
{
tmp32 = ((uint32_t)s_dummyData[instance] << 8U | (s_dummyData[instance]));
/* last transfer */
if (handle->rxRemainingBytes == SPI_COUNT_TO_BYTES(handle->dataWidth, handle->toReceiveCount + 1))
{
tx_ctrl |= last_ctrl;
}
}
/* send data */
tmp32 = tx_ctrl | tmp32;
base->FIFOWR = tmp32;
/* increase number of expected data to receive */
handle->toReceiveCount += 1;
loopContinue = true;
}
} while (loopContinue);
}
void SPI_MasterTransferHandleIRQ(SPI_Type *base, spi_master_handle_t *handle)
{
assert((NULL != base) && (NULL != handle));
/* IRQ behaviour:
* - first interrupt is triggered by empty txFIFO. The transfer function
* then tries empty rxFIFO and fill txFIFO interleaved that results to
* strategy to process as many items as possible.
* - the next IRQs can be:
* rxIRQ from nonempty rxFIFO which requires to empty rxFIFO.
* txIRQ from empty txFIFO which requires to refill txFIFO.
* - last interrupt is triggered by empty txFIFO. The last state is
* known by empty rxBuffer and txBuffer. If there is nothing to receive
* or send - both operations have been finished and interrupts can be
* disabled.
*/
/* Data to send or read or expected to receive */
if ((handle->txRemainingBytes) || (handle->rxRemainingBytes) || (handle->toReceiveCount))
{
/* Transmit or receive data */
SPI_TransferHandleIRQInternal(base, handle);
/* No data to send or read or receive. Transfer ends. Set txTrigger to 0 level and
* enable txIRQ to confirm when txFIFO becomes empty */
if ((!handle->txRemainingBytes) && (!handle->rxRemainingBytes) && (!handle->toReceiveCount))
{
base->FIFOTRIG = base->FIFOTRIG & (~SPI_FIFOTRIG_TXLVL_MASK);
base->FIFOINTENSET |= SPI_FIFOINTENSET_TXLVL_MASK;
}
else
{
uint32_t rxRemainingCount = SPI_BYTES_TO_COUNT(handle->dataWidth, handle->rxRemainingBytes);
/* If, there are no data to send or rxFIFO is already filled with necessary number of dummy data,
* disable txIRQ. From this point only rxIRQ is used to receive data without any transmission */
if ((!handle->txRemainingBytes) && (rxRemainingCount <= handle->toReceiveCount))
{
base->FIFOINTENCLR = SPI_FIFOINTENCLR_TXLVL_MASK;
}
/* Nothing to receive or transmit, but we still have pending data which are bellow rxLevel.
* Cannot clear rxFIFO, txFIFO might be still active */
if (rxRemainingCount == 0)
{
if ((handle->txRemainingBytes == 0) && (handle->toReceiveCount != 0) &&
(handle->toReceiveCount < SPI_FIFOTRIG_RXLVL_GET(base) + 1))
{
base->FIFOTRIG =
(base->FIFOTRIG & (~SPI_FIFOTRIG_RXLVL_MASK)) | SPI_FIFOTRIG_RXLVL(handle->toReceiveCount - 1);
}
}
/* Expected to receive less data than rxLevel value, we have to update rxLevel */
else
{
if (rxRemainingCount < (SPI_FIFOTRIG_RXLVL_GET(base) + 1))
{
base->FIFOTRIG =
(base->FIFOTRIG & (~SPI_FIFOTRIG_RXLVL_MASK)) | SPI_FIFOTRIG_RXLVL(rxRemainingCount - 1);
}
}
}
}
else
{
/* Empty txFIFO is confirmed. Disable IRQs and restore triggers values */
base->FIFOINTENCLR = SPI_FIFOINTENCLR_RXLVL_MASK | SPI_FIFOINTENCLR_TXLVL_MASK;
base->FIFOTRIG = (base->FIFOTRIG & (~(SPI_FIFOTRIG_RXLVL_MASK | SPI_FIFOTRIG_RXLVL_MASK))) |
SPI_FIFOTRIG_RXLVL(handle->rxWatermark) | SPI_FIFOTRIG_TXLVL(handle->txWatermark);
/* set idle state and call user callback */
handle->state = kStatus_SPI_Idle;
if (handle->callback)
{
(handle->callback)(base, handle, handle->state, handle->userData);
}
}
}