191 lines
13 KiB
C
191 lines
13 KiB
C
|
/*!
|
||
|
\file gd32f3x0_syscfg.h
|
||
|
\brief definitions for the SYSCFG
|
||
|
|
||
|
\version 2017-06-06, V1.0.0, firmware for GD32F3x0
|
||
|
\version 2019-06-01, V2.0.0, firmware for GD32F3x0
|
||
|
*/
|
||
|
|
||
|
/*
|
||
|
Copyright (c) 2019, GigaDevice Semiconductor Inc.
|
||
|
|
||
|
Redistribution and use in source and binary forms, with or without modification,
|
||
|
are permitted provided that the following conditions are met:
|
||
|
|
||
|
1. Redistributions of source code must retain the above copyright notice, this
|
||
|
list of conditions and the following disclaimer.
|
||
|
2. Redistributions in binary form must reproduce the above copyright notice,
|
||
|
this list of conditions and the following disclaimer in the documentation
|
||
|
and/or other materials provided with the distribution.
|
||
|
3. Neither the name of the copyright holder nor the names of its contributors
|
||
|
may be used to endorse or promote products derived from this software without
|
||
|
specific prior written permission.
|
||
|
|
||
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||
|
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||
|
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||
|
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
|
||
|
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||
|
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
|
||
|
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||
|
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
|
||
|
OF SUCH DAMAGE.
|
||
|
*/
|
||
|
|
||
|
#ifndef GD32F3X0_SYSCFG_H
|
||
|
#define GD32F3X0_SYSCFG_H
|
||
|
|
||
|
#include "gd32f3x0.h"
|
||
|
|
||
|
/* SYSCFG definitions */
|
||
|
#define SYSCFG SYSCFG_BASE
|
||
|
|
||
|
/* registers definitions */
|
||
|
#define SYSCFG_CFG0 REG32(SYSCFG + 0x00000000U) /*!< system configuration register 0 */
|
||
|
#define SYSCFG_EXTISS0 REG32(SYSCFG + 0x00000008U) /*!< EXTI sources selection register 0 */
|
||
|
#define SYSCFG_EXTISS1 REG32(SYSCFG + 0x0000000CU) /*!< EXTI sources selection register 1 */
|
||
|
#define SYSCFG_EXTISS2 REG32(SYSCFG + 0x00000010U) /*!< EXTI sources selection register 2 */
|
||
|
#define SYSCFG_EXTISS3 REG32(SYSCFG + 0x00000014U) /*!< EXTI sources selection register 3 */
|
||
|
#define SYSCFG_CFG2 REG32(SYSCFG + 0x00000018U) /*!< system configuration register 2 */
|
||
|
#define SYSCFG_CPSCTL REG32(SYSCFG + 0x00000020U) /*!< system I/O compensation control register */
|
||
|
|
||
|
/* SYSCFG_CFG0 bits definitions */
|
||
|
#define SYSCFG_CFG0_BOOT_MODE BITS(0,1) /*!< SYSCFG memory remap config */
|
||
|
#define SYSCFG_CFG0_ADC_DMA_RMP BIT(8) /*!< ADC DMA remap config */
|
||
|
#define SYSCFG_CFG0_USART0_TX_DMA_RMP BIT(9) /*!< USART0 Tx DMA remap config */
|
||
|
#define SYSCFG_CFG0_USART0_RX_DMA_RMP BIT(10) /*!< USART0 Rx DMA remap config */
|
||
|
#define SYSCFG_CFG0_TIMER15_DMA_RMP BIT(11) /*!< TIMER 15 DMA remap config */
|
||
|
#define SYSCFG_CFG0_TIMER16_DMA_RMP BIT(12) /*!< TIMER 16 DMA remap config */
|
||
|
#define SYSCFG_CFG0_PB9_HCCE BIT(19) /*!< PB9 pin high current capability enable */
|
||
|
|
||
|
/* SYSCFG_EXTISS0 bits definitions */
|
||
|
#define SYSCFG_EXTISS0_EXTI0_SS BITS(0,3) /*!< EXTI 0 configuration */
|
||
|
#define SYSCFG_EXTISS0_EXTI1_SS BITS(4,7) /*!< EXTI 1 configuration */
|
||
|
#define SYSCFG_EXTISS0_EXTI2_SS BITS(8,11) /*!< EXTI 2 configuration */
|
||
|
#define SYSCFG_EXTISS0_EXTI3_SS BITS(12,15) /*!< EXTI 3 configuration */
|
||
|
|
||
|
/* SYSCFG_EXTISS1 bits definitions */
|
||
|
#define SYSCFG_EXTISS1_EXTI4_SS BITS(0,3) /*!< EXTI 4 configuration */
|
||
|
#define SYSCFG_EXTISS1_EXTI5_SS BITS(4,7) /*!< EXTI 5 configuration */
|
||
|
#define SYSCFG_EXTISS1_EXTI6_SS BITS(8,11) /*!< EXTI 6 configuration */
|
||
|
#define SYSCFG_EXTISS1_EXTI7_SS BITS(12,15) /*!< EXTI 7 configuration */
|
||
|
|
||
|
/* SYSCFG_EXTISS2 bits definitions */
|
||
|
#define SYSCFG_EXTISS2_EXTI8_SS BITS(0,3) /*!< EXTI 8 configuration */
|
||
|
#define SYSCFG_EXTISS2_EXTI9_SS BITS(4,7) /*!< EXTI 9 configuration */
|
||
|
#define SYSCFG_EXTISS2_EXTI10_SS BITS(8,11) /*!< EXTI 10 configuration */
|
||
|
#define SYSCFG_EXTISS2_EXTI11_SS BITS(12,15) /*!< EXTI 11 configuration */
|
||
|
|
||
|
/* SYSCFG_EXTISS3 bits definitions */
|
||
|
#define SYSCFG_EXTISS3_EXTI12_SS BITS(0,3) /*!< EXTI 12 configuration */
|
||
|
#define SYSCFG_EXTISS3_EXTI13_SS BITS(4,7) /*!< EXTI 13 configuration */
|
||
|
#define SYSCFG_EXTISS3_EXTI14_SS BITS(8,11) /*!< EXTI 14 configuration */
|
||
|
#define SYSCFG_EXTISS3_EXTI15_SS BITS(12,15) /*!< EXTI 15 configuration */
|
||
|
|
||
|
/* SYSCFG_CFG2 bits definitions */
|
||
|
#define SYSCFG_CFG2_LOCKUP_LOCK BIT(0) /*!< enable and lock the LOCKUP (Hardfault) output of Cortex-M4 with break input of TIMER0/14/15/16 */
|
||
|
#define SYSCFG_CFG2_SRAM_PARITY_ERROR_LOCK BIT(1) /*!< enable and lock the SRAM_PARITY error signal with break input of TIMER0/14/15/16 */
|
||
|
#define SYSCFG_CFG2_LVD_LOCK BIT(2) /*!< enable and lock the LVD connection with TIMER0 break input and also the LVD_EN and LVDSEL[2:0] bits of the power control interface */
|
||
|
#define SYSCFG_CFG2_SRAM_PCEF BIT(8) /*!< SRAM parity check error flag */
|
||
|
|
||
|
/* SYSCFG_CPSCTL bits definitions */
|
||
|
#define SYSCFG_CPSCTL_CPS_EN BIT(0) /*!< I/O compensation cell enable */
|
||
|
#define SYSCFG_CPSCTL_CPS_RDY BIT(8) /*!< I/O compensation cell is ready or not */
|
||
|
|
||
|
/* constants definitions */
|
||
|
/* DMA remap definitions */
|
||
|
#define SYSCFG_DMA_REMAP_ADC SYSCFG_CFG0_ADC_DMA_RMP /*!< ADC DMA remap */
|
||
|
#define SYSCFG_DMA_REMAP_USART0TX SYSCFG_CFG0_USART0_TX_DMA_RMP /*!< USART0_TX DMA remap */
|
||
|
#define SYSCFG_DMA_REMAP_USART0RX SYSCFG_CFG0_USART0_RX_DMA_RMP /*!< USART0_RX DMA remap */
|
||
|
#define SYSCFG_DMA_REMAP_TIMER15 SYSCFG_CFG0_TIMER15_DMA_RMP /*!< TIMER15 DMA remap */
|
||
|
#define SYSCFG_DMA_REMAP_TIMER16 SYSCFG_CFG0_TIMER16_DMA_RMP /*!< TIMER16 DMA remap */
|
||
|
|
||
|
/* high current definitions */
|
||
|
#define SYSCFG_HIGH_CURRENT_ENABLE SYSCFG_CFG0_PB9_HCCE /*!< high current enable */
|
||
|
#define SYSCFG_HIGH_CURRENT_DISABLE (~SYSCFG_CFG0_PB9_HCCE) /*!< high current disable */
|
||
|
|
||
|
/* EXTI source select definition */
|
||
|
#define EXTISS0 ((uint8_t)0x00U) /*!< EXTI source select register 0 */
|
||
|
#define EXTISS1 ((uint8_t)0x01U) /*!< EXTI source select register 1 */
|
||
|
#define EXTISS2 ((uint8_t)0x02U) /*!< EXTI source select register 2 */
|
||
|
#define EXTISS3 ((uint8_t)0x03U) /*!< EXTI source select register 3 */
|
||
|
|
||
|
/* EXTI source select mask bits definition */
|
||
|
#define EXTI_SS_MASK BITS(0,3) /*!< EXTI source select mask */
|
||
|
|
||
|
/* EXTI source select jumping step definition */
|
||
|
#define EXTI_SS_JSTEP ((uint8_t)0x04U) /*!< EXTI source select jumping step */
|
||
|
|
||
|
/* EXTI source select moving step definition */
|
||
|
#define EXTI_SS_MSTEP(pin) (EXTI_SS_JSTEP * ((pin) % EXTI_SS_JSTEP)) /*!< EXTI source select moving step */
|
||
|
|
||
|
/* EXTI source port definitions */
|
||
|
#define EXTI_SOURCE_GPIOA ((uint8_t)0x00U) /*!< EXTI GPIOA configuration */
|
||
|
#define EXTI_SOURCE_GPIOB ((uint8_t)0x01U) /*!< EXTI GPIOB configuration */
|
||
|
#define EXTI_SOURCE_GPIOC ((uint8_t)0x02U) /*!< EXTI GPIOC configuration */
|
||
|
#define EXTI_SOURCE_GPIOD ((uint8_t)0x03U) /*!< EXTI GPIOD configuration */
|
||
|
#define EXTI_SOURCE_GPIOF ((uint8_t)0x05U) /*!< EXTI GPIOF configuration */
|
||
|
|
||
|
/* EXTI source pin definitions */
|
||
|
#define EXTI_SOURCE_PIN0 ((uint8_t)0x00U) /*!< EXTI GPIO pin0 configuration */
|
||
|
#define EXTI_SOURCE_PIN1 ((uint8_t)0x01U) /*!< EXTI GPIO pin1 configuration */
|
||
|
#define EXTI_SOURCE_PIN2 ((uint8_t)0x02U) /*!< EXTI GPIO pin2 configuration */
|
||
|
#define EXTI_SOURCE_PIN3 ((uint8_t)0x03U) /*!< EXTI GPIO pin3 configuration */
|
||
|
#define EXTI_SOURCE_PIN4 ((uint8_t)0x04U) /*!< EXTI GPIO pin4 configuration */
|
||
|
#define EXTI_SOURCE_PIN5 ((uint8_t)0x05U) /*!< EXTI GPIO pin5 configuration */
|
||
|
#define EXTI_SOURCE_PIN6 ((uint8_t)0x06U) /*!< EXTI GPIO pin6 configuration */
|
||
|
#define EXTI_SOURCE_PIN7 ((uint8_t)0x07U) /*!< EXTI GPIO pin7 configuration */
|
||
|
#define EXTI_SOURCE_PIN8 ((uint8_t)0x08U) /*!< EXTI GPIO pin8 configuration */
|
||
|
#define EXTI_SOURCE_PIN9 ((uint8_t)0x09U) /*!< EXTI GPIO pin9 configuration */
|
||
|
#define EXTI_SOURCE_PIN10 ((uint8_t)0x0AU) /*!< EXTI GPIO pin10 configuration */
|
||
|
#define EXTI_SOURCE_PIN11 ((uint8_t)0x0BU) /*!< EXTI GPIO pin11 configuration */
|
||
|
#define EXTI_SOURCE_PIN12 ((uint8_t)0x0CU) /*!< EXTI GPIO pin12 configuration */
|
||
|
#define EXTI_SOURCE_PIN13 ((uint8_t)0x0DU) /*!< EXTI GPIO pin13 configuration */
|
||
|
#define EXTI_SOURCE_PIN14 ((uint8_t)0x0EU) /*!< EXTI GPIO pin14 configuration */
|
||
|
#define EXTI_SOURCE_PIN15 ((uint8_t)0x0FU) /*!< EXTI GPIO pin15 configuration */
|
||
|
|
||
|
/* lock definitions */
|
||
|
#define SYSCFG_LOCK_LOCKUP SYSCFG_CFG2_LOCKUP_LOCK /*!< LOCKUP output lock */
|
||
|
#define SYSCFG_LOCK_SRAM_PARITY_ERROR SYSCFG_CFG2_SRAM_PARITY_ERROR_LOCK /*!< SRAM parity error lock */
|
||
|
#define SYSCFG_LOCK_LVD SYSCFG_CFG2_LVD_LOCK /*!< LVD lock */
|
||
|
|
||
|
/* SRAM parity check error flag definitions */
|
||
|
#define SYSCFG_SRAM_PCEF SYSCFG_CFG2_SRAM_PCEF /*!< SRAM parity check error flag */
|
||
|
|
||
|
/* I/O compensation cell enable/disable */
|
||
|
#define SYSCFG_COMPENSATION(regval) (BIT(0) & ((uint32_t)(regval) << 0))
|
||
|
#define SYSCFG_COMPENSATION_DISABLE SYSCFG_COMPENSATION(0) /*!< I/O compensation cell is power-down */
|
||
|
#define SYSCFG_COMPENSATION_ENABLE SYSCFG_COMPENSATION(1) /*!< I/O compensation cell is enabled */
|
||
|
|
||
|
/* function declarations */
|
||
|
/* deinit syscfg module */
|
||
|
void syscfg_deinit(void);
|
||
|
|
||
|
/* enable the DMA channels remapping */
|
||
|
void syscfg_dma_remap_enable(uint32_t syscfg_dma_remap);
|
||
|
/* disable the DMA channels remapping */
|
||
|
void syscfg_dma_remap_disable(uint32_t syscfg_dma_remap);
|
||
|
|
||
|
/* enable PB9 high current capability */
|
||
|
void syscfg_high_current_enable(void);
|
||
|
/* disable PB9 high current capability */
|
||
|
void syscfg_high_current_disable(void);
|
||
|
|
||
|
/* configure the GPIO pin as EXTI Line */
|
||
|
void syscfg_exti_line_config(uint8_t exti_port, uint8_t exti_pin);
|
||
|
/* connect TIMER0/14/15/16 break input to the selected parameter */
|
||
|
void syscfg_lock_config(uint32_t syscfg_lock);
|
||
|
|
||
|
/* check if the specified flag in SYSCFG_CFG2 is set or not */
|
||
|
FlagStatus syscfg_flag_get(uint32_t syscfg_flag);
|
||
|
/* clear the flag in SYSCFG_CFG2 by writing 1 */
|
||
|
void syscfg_flag_clear(uint32_t syscfg_flag);
|
||
|
|
||
|
/* configure the I/O compensation cell */
|
||
|
void syscfg_compensation_config(uint32_t syscfg_compensation);
|
||
|
/* check if the I/O compensation cell ready flag is set or not */
|
||
|
FlagStatus syscfg_cps_rdy_flag_get(void);
|
||
|
|
||
|
#endif /* GD32F3X0_SYSCFG_H */
|