rt-thread/bsp/tms320f28379d/drivers/drv_sci.c

265 lines
6.7 KiB
C
Raw Normal View History

2019-03-27 13:09:19 +08:00
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2019-02-02 xuzhuoyi first version
*/
#include "rtdevice.h"
#include "board.h"
#include "drv_sci.h"
#include "F2837xD_device.h"
#include "F2837xD_sci.h"
typedef long off_t;
#include "F2837xD_sci_io.h"
#ifdef RT_USING_SERIAL
#define LOG_TAG "drv.sci"
/* c28x uart driver class */
struct c28x_uart
{
const char *name;
volatile struct SCI_REGS *sci_regs;
struct rt_serial_device serial;
};
static struct c28x_uart uart_obj[3] = {0};
static rt_err_t c28x_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
{
struct c28x_uart *uart;
RT_ASSERT(serial != RT_NULL);
RT_ASSERT(cfg != RT_NULL);
uart = (struct c28x_uart *)serial->parent.user_data;
RT_ASSERT(uart != RT_NULL);
EALLOW;
// default config
// 1 stop bit, No loopback
// No parity,8 char bits,
// async mode, idle-line protocol
uart->sci_regs->SCICCR.all = 0x0007;
// enable TX, RX, internal SCICLK,
// Disable RX ERR, SLEEP, TXWAKE
uart->sci_regs->SCICTL1.all = 0x0003;
uart->sci_regs->SCICTL2.bit.TXINTENA = 1;
uart->sci_regs->SCICTL2.bit.RXBKINTENA = 1;
uart->sci_regs->SCIHBAUD.all = 0x0000; // 115200 baud @LSPCLK = 22.5MHz (90 MHz SYSCLK).
uart->sci_regs->SCILBAUD.all = 53;
uart->sci_regs->SCICTL1.all = 0x0023; // Relinquish SCI from Reset
switch (cfg->data_bits)
{
case DATA_BITS_5:
uart->sci_regs->SCICCR.bit.SCICHAR = 4;
break;
case DATA_BITS_6:
uart->sci_regs->SCICCR.bit.SCICHAR = 5;
break;
case DATA_BITS_7:
uart->sci_regs->SCICCR.bit.SCICHAR = 6;
break;
case DATA_BITS_8:
uart->sci_regs->SCICCR.bit.SCICHAR = 7;
break;
default:
uart->sci_regs->SCICCR.bit.SCICHAR = 7;
break;
}
switch (cfg->stop_bits)
{
case STOP_BITS_1:
uart->sci_regs->SCICCR.bit.STOPBITS = 0;
break;
case STOP_BITS_2:
uart->sci_regs->SCICCR.bit.STOPBITS = 1;
break;
default:
uart->sci_regs->SCICCR.bit.STOPBITS = 0;
break;
}
switch (cfg->parity)
{
case PARITY_NONE:
uart->sci_regs->SCICCR.bit.PARITYENA = 0;
break;
case PARITY_ODD:
uart->sci_regs->SCICCR.bit.PARITYENA = 1;
uart->sci_regs->SCICCR.bit.PARITY = 0;
break;
case PARITY_EVEN:
uart->sci_regs->SCICCR.bit.PARITYENA = 1;
uart->sci_regs->SCICCR.bit.PARITY = 1;
break;
default:
uart->sci_regs->SCICCR.bit.PARITYENA = 0;
break;
}
EDIS;
return RT_EOK;
}
static rt_err_t c28x_control(struct rt_serial_device *serial, int cmd, void *arg)
{
struct c28x_uart *uart;
uart = (struct c28x_uart *)serial->parent.user_data;
EALLOW;
switch (cmd)
{
/* disable interrupt */
case RT_DEVICE_CTRL_CLR_INT:
/* disable interrupt */
uart->sci_regs->SCICTL2.bit.TXINTENA = 0;
uart->sci_regs->SCICTL2.bit.RXBKINTENA = 0;
break;
/* enable interrupt */
case RT_DEVICE_CTRL_SET_INT:
/* enable interrupt */
uart->sci_regs->SCICTL2.bit.TXINTENA = 1;
uart->sci_regs->SCICTL2.bit.RXBKINTENA = 1;
break;
}
return RT_EOK;
}
static int c28x_putc(struct rt_serial_device *serial, char c)
{
SCI_write(0, &c, 1);
return 1;
}
static int c28x_getc(struct rt_serial_device *serial)
{
char ch;
if(SCI_read(0, &ch, 1))
return ch;
else
return -1;
}
/**
* Uart common interrupt process. This need add to uart ISR.
*
* @param serial serial device
*/
static void uart_isr(struct rt_serial_device *serial) {
struct c28x_uart *uart = (struct c28x_uart *) serial->parent.user_data;
RT_ASSERT(uart != RT_NULL);
rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
SciaRegs.SCIFFRX.bit.RXFFINTCLR = 1; // Clear Interrupt flag
PieCtrlRegs.PIEACK.all |= 0x100; // Issue PIE ack
2019-03-27 13:09:19 +08:00
}
static const struct rt_uart_ops c28x_uart_ops =
{
.configure = c28x_configure,
.control = c28x_control,
.putc = c28x_putc,
.getc = c28x_getc,
};
//
// sciaRxFifoIsr - SCIA Receive FIFO ISR
//
interrupt void sciaRxFifoIsr(void)
{
/* enter interrupt */
rt_interrupt_enter();
uart_isr(&uart_obj[0].serial);
/* leave interrupt */
rt_interrupt_leave();
}
2019-03-27 13:09:19 +08:00
int rt_hw_sci_init(void)
{
EALLOW;
GpioCtrlRegs.GPBMUX1.bit.GPIO42 = 3;
GpioCtrlRegs.GPBMUX1.bit.GPIO43 = 3;
GpioCtrlRegs.GPBGMUX1.bit.GPIO42 = 3;
GpioCtrlRegs.GPBGMUX1.bit.GPIO43 = 3;
GpioCtrlRegs.GPAMUX2.bit.GPIO18 = 2;
GpioCtrlRegs.GPAMUX2.bit.GPIO19 = 2;
GpioCtrlRegs.GPAGMUX2.bit.GPIO18 = 0;
GpioCtrlRegs.GPAGMUX2.bit.GPIO19 = 0;
GpioCtrlRegs.GPBMUX2.bit.GPIO56 = 2;
GpioCtrlRegs.GPEMUX1.bit.GPIO139 = 2;
GpioCtrlRegs.GPBGMUX2.bit.GPIO56 = 1;
GpioCtrlRegs.GPEGMUX1.bit.GPIO139 = 1;
CpuSysRegs.PCLKCR7.bit.SCI_A = 1;
CpuSysRegs.PCLKCR7.bit.SCI_B = 1;
CpuSysRegs.PCLKCR7.bit.SCI_C = 1;
PieVectTable.SCIA_RX_INT = &sciaRxFifoIsr;
2019-03-27 13:09:19 +08:00
EDIS;
//
// Enable interrupts required for this example
//
PieCtrlRegs.PIECTRL.bit.ENPIE = 1; // Enable the PIE block
PieCtrlRegs.PIEIER9.bit.INTx1 = 1; // PIE Group 9, INT1
IER |= 0x100; // Enable CPU INT
EINT;
2019-03-27 13:09:19 +08:00
struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT;
rt_err_t result = 0;
uart_obj[0].serial.ops = &c28x_uart_ops;
uart_obj[0].serial.config = config;
uart_obj[0].name = "scia";
uart_obj[0].sci_regs = &SciaRegs;
uart_obj[1].serial.ops = &c28x_uart_ops;
uart_obj[1].serial.config = config;
uart_obj[1].name = "scib";
uart_obj[1].sci_regs = &ScibRegs;
uart_obj[2].serial.ops = &c28x_uart_ops;
uart_obj[2].serial.config = config;
uart_obj[2].name = "scic";
uart_obj[2].sci_regs = &ScicRegs;
/* register UART device */
result = rt_hw_serial_register(&uart_obj[0].serial, uart_obj[0].name,
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
&uart_obj[0]);
/* register UART device */
result = rt_hw_serial_register(&uart_obj[1].serial, uart_obj[1].name,
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
&uart_obj[1]);
/* register UART device */
result = rt_hw_serial_register(&uart_obj[2].serial, uart_obj[2].name,
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
&uart_obj[2]);
return result;
}
#endif /* RT_USING_SERIAL */