rt-thread/bsp/lm3s/driverlib/udma.h

339 lines
15 KiB
C
Raw Normal View History

//*****************************************************************************
//
// udma.h - Prototypes and macros for the uDMA controller.
//
// Copyright (c) 2007-2009 Luminary Micro, Inc. All rights reserved.
// Software License Agreement
//
// Luminary Micro, Inc. (LMI) is supplying this software for use solely and
// exclusively on LMI's microcontroller products.
//
// The software is owned by LMI and/or its suppliers, and is protected under
// applicable copyright laws. All rights are reserved. You may not combine
// this software with "viral" open-source software in order to form a larger
// program. Any use in violation of the foregoing restrictions may subject
// the user to criminal sanctions under applicable laws, as well as to civil
// liability for the breach of the terms and conditions of this license.
//
// THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
// OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
// LMI SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
// CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
//
// This is part of revision 4694 of the Stellaris Peripheral Driver Library.
//
//*****************************************************************************
#ifndef __UDMA_H__
#define __UDMA_H__
//*****************************************************************************
//
// If building with a C++ compiler, make all of the definitions in this header
// have a C binding.
//
//*****************************************************************************
#ifdef __cplusplus
extern "C"
{
#endif
//*****************************************************************************
//
// A structure that defines an entry in the channel control table. These
// fields are used by the uDMA controller and normally it is not necessary for
// software to directly read or write fields in the table.
//
//*****************************************************************************
typedef struct
{
//
// The ending source address of the data transfer.
//
volatile void *pvSrcEndAddr;
//
// The ending destination address of the data transfer.
//
volatile void *pvDstEndAddr;
//
// The channel control mode.
//
volatile unsigned long ulControl;
//
// An unused location.
//
volatile unsigned long ulSpare;
}
tDMAControlTable;
//*****************************************************************************
//
// Flags that can be passed to uDMAChannelAttributeEnable(),
// uDMAChannelAttributeDisable(), and returned from uDMAChannelAttributeGet().
//
//*****************************************************************************
#define UDMA_ATTR_USEBURST 0x00000001
#define UDMA_ATTR_ALTSELECT 0x00000002
#define UDMA_ATTR_HIGH_PRIORITY 0x00000004
#define UDMA_ATTR_REQMASK 0x00000008
#define UDMA_ATTR_ALL 0x0000000F
//*****************************************************************************
//
// DMA control modes that can be passed to uDMAModeSet() and returned
// uDMAModeGet().
//
//*****************************************************************************
#define UDMA_MODE_STOP 0x00000000
#define UDMA_MODE_BASIC 0x00000001
#define UDMA_MODE_AUTO 0x00000002
#define UDMA_MODE_PINGPONG 0x00000003
#define UDMA_MODE_MEM_SCATTER_GATHER \
0x00000004
#define UDMA_MODE_PER_SCATTER_GATHER \
0x00000006
#define UDMA_MODE_ALT_SELECT 0x00000001
//*****************************************************************************
//
// Channel configuration values that can be passed to uDMAControlSet().
//
//*****************************************************************************
#define UDMA_DST_INC_8 0x00000000
#define UDMA_DST_INC_16 0x40000000
#define UDMA_DST_INC_32 0x80000000
#define UDMA_DST_INC_NONE 0xc0000000
#define UDMA_SRC_INC_8 0x00000000
#define UDMA_SRC_INC_16 0x04000000
#define UDMA_SRC_INC_32 0x08000000
#define UDMA_SRC_INC_NONE 0x0c000000
#define UDMA_SIZE_8 0x00000000
#define UDMA_SIZE_16 0x11000000
#define UDMA_SIZE_32 0x22000000
#define UDMA_ARB_1 0x00000000
#define UDMA_ARB_2 0x00004000
#define UDMA_ARB_4 0x00008000
#define UDMA_ARB_8 0x0000c000
#define UDMA_ARB_16 0x00010000
#define UDMA_ARB_32 0x00014000
#define UDMA_ARB_64 0x00018000
#define UDMA_ARB_128 0x0001c000
#define UDMA_ARB_256 0x00020000
#define UDMA_ARB_512 0x00024000
#define UDMA_ARB_1024 0x00028000
#define UDMA_NEXT_USEBURST 0x00000008
//*****************************************************************************
//
// Channel numbers to be passed to API functions that require a channel number
// ID.
//
//*****************************************************************************
#define UDMA_CHANNEL_USBEP1RX 0
#define UDMA_CHANNEL_USBEP1TX 1
#define UDMA_CHANNEL_USBEP2RX 2
#define UDMA_CHANNEL_USBEP2TX 3
#define UDMA_CHANNEL_USBEP3RX 4
#define UDMA_CHANNEL_USBEP3TX 5
#define UDMA_CHANNEL_ETH0RX 6
#define UDMA_CHANNEL_ETH0TX 7
#define UDMA_CHANNEL_UART0RX 8
#define UDMA_CHANNEL_UART0TX 9
#define UDMA_CHANNEL_SSI0RX 10
#define UDMA_CHANNEL_SSI0TX 11
#define UDMA_CHANNEL_ADC0 14
#define UDMA_CHANNEL_ADC1 15
#define UDMA_CHANNEL_ADC2 16
#define UDMA_CHANNEL_ADC3 17
#define UDMA_CHANNEL_TMR0A 18
#define UDMA_CHANNEL_TMR0B 19
#define UDMA_CHANNEL_TMR1A 20
#define UDMA_CHANNEL_TMR1B 21
#define UDMA_CHANNEL_UART1RX 22
#define UDMA_CHANNEL_UART1TX 23
#define UDMA_CHANNEL_SSI1RX 24
#define UDMA_CHANNEL_SSI1TX 25
#define UDMA_CHANNEL_I2S0RX 28
#define UDMA_CHANNEL_I2S0TX 29
#define UDMA_CHANNEL_SW 30
//*****************************************************************************
//
// Flags to be OR'd with the channel ID to indicate if the primary or alternate
// control structure should be used.
//
//*****************************************************************************
#define UDMA_PRI_SELECT 0x00000000
#define UDMA_ALT_SELECT 0x00000020
//*****************************************************************************
//
// uDMA interrupt sources, to be passed to uDMAIntRegister() and
// uDMAIntUnregister().
//
//*****************************************************************************
#define UDMA_INT_SW 62
#define UDMA_INT_ERR 63
//*****************************************************************************
//
// Channel numbers to be passed to API functions that require a channel number
// ID. These are for secondary peripheral assignments.
//
//*****************************************************************************
#define UDMA_SEC_CHANNEL_UART2RX_0 \
0
#define UDMA_SEC_CHANNEL_UART2TX_1 \
1
#define UDMA_SEC_CHANNEL_TMR3A 2
#define UDMA_SEC_CHANNEL_TMR3B 3
#define UDMA_SEC_CHANNEL_TMR2A_4 \
4
#define UDMA_SEC_CHANNEL_TMR2B_5 \
5
#define UDMA_SEC_CHANNEL_TMR2A_6 \
6
#define UDMA_SEC_CHANNEL_TMR2B_7 \
7
#define UDMA_SEC_CHANNEL_UART1RX \
8
#define UDMA_SEC_CHANNEL_UART1TX \
9
#define UDMA_SEC_CHANNEL_SSI1RX 10
#define UDMA_SEC_CHANNEL_SSI1TX 11
#define UDMA_SEC_CHANNEL_UART2RX_12 \
12
#define UDMA_SEC_CHANNEL_UART2TX_13 \
13
#define UDMA_SEC_CHANNEL_TMR2A_14 \
14
#define UDMA_SEC_CHANNEL_TMR2B_15 \
15
#define UDMA_SEC_CHANNEL_TMR1A 18
#define UDMA_SEC_CHANNEL_TMR1B 19
#define UDMA_SEC_CHANNEL_EPI0RX 20
#define UDMA_SEC_CHANNEL_EPI0TX 21
#define UDMA_SEC_CHANNEL_ADC10 24
#define UDMA_SEC_CHANNEL_ADC11 25
#define UDMA_SEC_CHANNEL_ADC12 26
#define UDMA_SEC_CHANNEL_ADC13 27
#define UDMA_SEC_CHANNEL_SW 30
//*****************************************************************************
//
// uDMA default/secondary peripheral selections, to be passed to
// uDMAChannelSelectSecondary() and uDMAChannelSelectDefault().
//
//*****************************************************************************
#define UDMA_DEF_USBEP1RX_SEC_UART2RX \
0x00000001
#define UDMA_DEF_USBEP1TX_SEC_UART2TX \
0x00000002
#define UDMA_DEF_USBEP2RX_SEC_TMR3A \
0x00000004
#define UDMA_DEF_USBEP2TX_SEC_TMR3B \
0x00000008
#define UDMA_DEF_USBEP3RX_SEC_TMR2A \
0x00000010
#define UDMA_DEF_USBEP3TX_SEC_TMR2B \
0x00000020
#define UDMA_DEF_ETH0RX_SEC_TMR2A \
0x00000040
#define UDMA_DEF_ETH0TX_SEC_TMR2B \
0x00000080
#define UDMA_DEF_UART0RX_SEC_UART1RX \
0x00000100
#define UDMA_DEF_UART0TX_SEC_UART1TX \
0x00000200
#define UDMA_DEF_SSI0RX_SEC_SSI1RX \
0x00000400
#define UDMA_DEF_SSI0TX_SEC_SSI1TX \
0x00000800
#define UDMA_DEF_RESERVED_SEC_UART2RX \
0x00001000
#define UDMA_DEF_RESERVED_SEC_UART2TX \
0x00002000
#define UDMA_DEF_ADC00_SEC_TMR2A \
0x00004000
#define UDMA_DEF_ADC01_SEC_TMR2B \
0x00008000
#define UDMA_DEF_ADC02_SEC_RESERVED \
0x00010000
#define UDMA_DEF_ADC03_SEC_RESERVED \
0x00020000
#define UDMA_DEF_TMR0A_SEC_TMR1A \
0x00040000
#define UDMA_DEF_TMR0B_SEC_TMR1B \
0x00080000
#define UDMA_DEF_TMR1A_SEC_EPI0RX \
0x00100000
#define UDMA_DEF_TMR1B_SEC_EPI0TX \
0x00200000
#define UDMA_DEF_UART1RX_SEC_RESERVED \
0x00400000
#define UDMA_DEF_UART1TX_SEC_RESERVED \
0x00800000
#define UDMA_DEF_SSI1RX_SEC_ADC10 \
0x01000000
#define UDMA_DEF_SSI1TX_SEC_ADC11 \
0x02000000
#define UDMA_DEF_RESERVED_SEC_ADC12 \
0x04000000
#define UDMA_DEF_RESERVED_SEC_ADC13 \
0x08000000
#define UDMA_DEF_I2S0RX_SEC_RESERVED \
0x10000000
#define UDMA_DEF_I2S0TX_SEC_RESERVED \
0x20000000
//*****************************************************************************
//
// API Function prototypes
//
//*****************************************************************************
extern void uDMAEnable(void);
extern void uDMADisable(void);
extern unsigned long uDMAErrorStatusGet(void);
extern void uDMAErrorStatusClear(void);
extern void uDMAChannelEnable(unsigned long ulChannel);
extern void uDMAChannelDisable(unsigned long ulChannel);
extern tBoolean uDMAChannelIsEnabled(unsigned long ulChannel);
extern void uDMAControlBaseSet(void *pControlTable);
extern void *uDMAControlBaseGet(void);
extern void uDMAChannelRequest(unsigned long ulChannel);
extern void uDMAChannelAttributeEnable(unsigned long ulChannel,
unsigned long ulAttr);
extern void uDMAChannelAttributeDisable(unsigned long ulChannel,
unsigned long ulAttr);
extern unsigned long uDMAChannelAttributeGet(unsigned long ulChannel);
extern void uDMAChannelControlSet(unsigned long ulChannel,
unsigned long ulControl);
extern void uDMAChannelTransferSet(unsigned long ulChannel,
unsigned long ulMode, void *pvSrcAddr,
void *pvDstAddr,
unsigned long ulTransferSize);
extern unsigned long uDMAChannelSizeGet(unsigned long ulChannel);
extern unsigned long uDMAChannelModeGet(unsigned long ulChannel);
extern void uDMAIntRegister(unsigned long ulIntChannel,
void (*pfnHandler)(void));
extern void uDMAIntUnregister(unsigned long ulIntChannel);
extern void uDMAChannelSelectDefault(unsigned long ulDefPeriphs);
extern void uDMAChannelSelectSecondary(unsigned long ulSecPeriphs);
extern unsigned long uDMAIntStatus(void);
extern void uDMAIntClear(unsigned long ulChanMask);
//*****************************************************************************
//
// Mark the end of the C bindings section for C++ compilers.
//
//*****************************************************************************
#ifdef __cplusplus
}
#endif
#endif // __UDMA_H__