libs/rt-thread
libs
/
rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
rt-thread/bsp/lpc55sxx/lpc55s69_nxp_evk/board/Kconfig

400 lines
12 KiB
Plaintext
Raw Normal View History

added LPC55S6x BSP
2019-10-24 17:56:09 +08:00
menu "Hardware Drivers Config"
config SOC_LPC55S6X
format Kconfig and sconscript
2023-01-09 10:14:23 +08:00
bool
added LPC55S6x BSP
2019-10-24 17:56:09 +08:00
select SOC_LPC55S6X_SERIES
select RT_USING_COMPONENTS_INIT
select RT_USING_USER_MAIN
default y
menu "On-chip Peripheral Drivers"
config BSP_USING_DMA
bool "Enable DMA"
select RT_USING_DMA
default n
format Kconfig and sconscript
2023-01-09 10:14:23 +08:00
added LPC55S6x BSP
2019-10-24 17:56:09 +08:00
config BSP_USING_PIN
bool "Enable GPIO"
select RT_USING_PIN
default y
menuconfig BSP_USING_UART
config BSP_USING_UART
bool "Enable UART"
select RT_USING_UART
default y
format Kconfig and sconscript
2023-01-09 10:14:23 +08:00
added LPC55S6x BSP
2019-10-24 17:56:09 +08:00
if BSP_USING_UART
config BSP_USING_UART0
bool "Enable Flexcomm0 as UART"
default y
if BSP_USING_UART0
choice
prompt "Select UART0 badurate"
default HW_UART0_BAUDRATE_115200
config HW_UART0_BAUDRATE_9600
bool "Badurate 9600"
config HW_UART0_BAUDRATE_115200
bool "Badurate 115200"
endchoice
endif
[rtduino][lpc55s69] 修正RTduino框架下的引脚错误 (#6963) 1.修正RTduino框架下的引脚错误 2.Kconfig新增RTduino依赖项 3.README文档完善 4.上传LPC55s69兼容arduino部分引脚图
2023-02-24 02:47:55 +08:00
config BSP_USING_UART1
bool "Enable Flexcomm1 as UART"
default n
if BSP_USING_UART1
choice
[rtduino][lpc55s69] 添加RTduino所需i2c引脚定义及结构体对象声明 (#6984)
2023-02-28 10:28:39 +08:00
prompt "Select UART1 badurate"
[rtduino][lpc55s69] 修正RTduino框架下的引脚错误 (#6963) 1.修正RTduino框架下的引脚错误 2.Kconfig新增RTduino依赖项 3.README文档完善 4.上传LPC55s69兼容arduino部分引脚图
2023-02-24 02:47:55 +08:00
default HW_UART1_BAUDRATE_115200
config HW_UART1_BAUDRATE_9600
bool "Badurate 9600"
config HW_UART1_BAUDRATE_115200
bool "Badurate 115200"
endchoice
endif
added LPC55S6x BSP
2019-10-24 17:56:09 +08:00
config BSP_USING_UART2
bool "Enable Flexcomm2 as UART"
default n
if BSP_USING_UART2
choice
prompt "Select UART2 badurate"
default HW_UART2_BAUDRATE_115200
config HW_UART2_BAUDRATE_9600
bool "Badurate 9600"
config HW_UART2_BAUDRATE_115200
format Kconfig and sconscript
2023-01-09 10:14:23 +08:00
bool "Badurate 115200"
added LPC55S6x BSP
2019-10-24 17:56:09 +08:00
endchoice
format Kconfig and sconscript
2023-01-09 10:14:23 +08:00
endif
added LPC55S6x BSP
2019-10-24 17:56:09 +08:00
endif
menuconfig BSP_USING_I2C
config BSP_USING_I2C
bool "Enable I2C"
select RT_USING_I2C
[bsp][lpc55sxx]update Kconfig default and delete drv_led drv_key
2023-05-18 13:41:57 +08:00
default n
added LPC55S6x BSP
2019-10-24 17:56:09 +08:00
if BSP_USING_I2C
config BSP_USING_I2C1
bool "Enable Flexcomm1 I2C"
[bsp][lpc55sxx]update: drv_soft_i2c, fix macro (#7506) Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2023-05-15 21:02:32 +08:00
default n
[rtduino][lpc55s69] 修正RTduino框架下的引脚错误 (#6963) 1.修正RTduino框架下的引脚错误 2.Kconfig新增RTduino依赖项 3.README文档完善 4.上传LPC55s69兼容arduino部分引脚图
2023-02-24 02:47:55 +08:00
added LPC55S6x BSP
2019-10-24 17:56:09 +08:00
if BSP_USING_I2C1
choice
prompt "Select I2C1 badurate"
default HW_I2C1_BAUDRATE_100kHZ
config HW_I2C1_BAUDRATE_100kHZ
bool "Badurate 100kHZ"
config HW_I2C1_BAUDRATE_400kHZ
bool "Badurate 400kHZ"
endchoice
endif
config BSP_USING_I2C4
bool "Enable Flexcomm4 I2C"
[bsp][lpc55sxx]update: drv_soft_i2c, fix macro (#7506) Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2023-05-15 21:02:32 +08:00
default n
added LPC55S6x BSP
2019-10-24 17:56:09 +08:00
if BSP_USING_I2C4
choice
prompt "Select I2C4 badurate"
default HW_I2C4_BAUDRATE_100kHZ
config HW_I2C4_BAUDRATE_100kHZ
bool "Badurate 100kHZ"
config HW_I2C4_BAUDRATE_400kHZ
bool "Badurate 400kHZ"
endchoice
endif
endif
[bsp][lpc55s69]add softi2c (#7221)
2023-04-14 09:41:38 +08:00
menuconfig BSP_USING_SOFT_I2C
[bsp][lpc55sxx]update: drv_soft_i2c, fix macro (#7506) Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2023-05-15 21:02:32 +08:00
bool "Enable software I2C bus"
[bsp][lpc55s69]add softi2c (#7221)
2023-04-14 09:41:38 +08:00
select RT_USING_I2C
select RT_USING_I2C_BITOPS
select RT_USING_PIN
default n
if BSP_USING_SOFT_I2C
config BSP_USING_SOFT_I2C1
bool "Enable I2C1 Bus (software simulation)"
default n
[bsp][lpc55sxx]update: drv_soft_i2c drv_soft_spi 1.config pin in menuconfig; 2.update format; 3.chang soft_i2c name
2023-06-02 16:30:59 +08:00
if BSP_USING_SOFT_I2C1
comment "Notice: num = 32 * PORTx + PINx + 1"
comment "0_15 --> 16; 1_8 --> 41"
config BSP_SOFT_I2C1_SCL_PIN
int "si2c1 SCL pin number"
default 16
config BSP_SOFT_I2C1_SDA_PIN
int "si2c1 SDA pin number"
default 41
endif
[bsp][lpc55s69]add softi2c (#7221)
2023-04-14 09:41:38 +08:00
config BSP_USING_SOFT_I2C2
bool "Enable I2C2 Bus (software simulation)"
default n
[bsp][lpc55sxx]update: drv_soft_i2c drv_soft_spi 1.config pin in menuconfig; 2.update format; 3.chang soft_i2c name
2023-06-02 16:30:59 +08:00
if BSP_USING_SOFT_I2C2
comment "Notice: num = 32 * PORTx + PINx + 1"
comment "0_18 --> 19; 1_10 --> 43"
config BSP_SOFT_I2C2_SCL_PIN
int "si2c2 SCL pin number"
default 19
config BSP_SOFT_I2C2_SDA_PIN
int "si2c2 SDA pin number"
default 43
endif
[bsp][lpc55s69]add softi2c (#7221)
2023-04-14 09:41:38 +08:00
endif
added LPC55S6x BSP
2019-10-24 17:56:09 +08:00
menuconfig BSP_USING_SPI
config BSP_USING_SPI
bool "Enable SPI"
select RT_USING_SPI
[bsp][lpc55sxx]update Kconfig default and delete drv_led drv_key
2023-05-18 13:41:57 +08:00
default n
format Kconfig and sconscript
2023-01-09 10:14:23 +08:00
added LPC55S6x BSP
2019-10-24 17:56:09 +08:00
if BSP_USING_SPI
[bsp][lpc55sxx] update spi driver (#6986) * [bsp][lpc55sxx] update spi driver 1. update spi driver, fix pin driver 2. move DMA_Init to board.c * [bsp][lpc55sxx] formmat code * [bsp][lpc55sxx] format lpc55s69_nxp_evk board file
2023-02-28 07:27:42 +08:00
config BSP_USING_SPI3
added LPC55S6x BSP
2019-10-24 17:56:09 +08:00
bool "Enable Flexcomm3 as SPI"
default n
[bsp][lpc55sxx] update spi driver (#6986) * [bsp][lpc55sxx] update spi driver 1. update spi driver, fix pin driver 2. move DMA_Init to board.c * [bsp][lpc55sxx] formmat code * [bsp][lpc55sxx] format lpc55s69_nxp_evk board file
2023-02-28 07:27:42 +08:00
config BSP_USING_SPI8
added LPC55S6x BSP
2019-10-24 17:56:09 +08:00
bool "Enable Flexcomm8 as High Speed SPI"
[bsp][lpc55sxx]update: drv_spi
2023-05-15 17:39:24 +08:00
default n
added LPC55S6x BSP
2019-10-24 17:56:09 +08:00
endif
[bsp][lpc55sxx] Added drv_soft_spi functionality and fixed drv_soft_i2c pin errors (#7251) 1.lpc55sxx添加软件模拟SPI驱动 2.lpc55s69 board在Kconfig中添加软件SPI配置项 3.lpc55s69添加通用GPIO引脚定义 4.lpc55s69修正Kconfig中关于软件i2c配置项
2023-04-24 07:30:42 +08:00
menuconfig BSP_USING_SOFT_SPI
bool "Enable soft SPI BUS"
default n
select RT_USING_PIN
select RT_USING_SPI_BITOPS
select RT_USING_SPI
if BSP_USING_SOFT_SPI
[bsp][lpc55sxx]update: drv_soft_i2c drv_soft_spi 1.config pin in menuconfig; 2.update format; 3.chang soft_i2c name
2023-06-02 16:30:59 +08:00
config BSP_USING_SOFT_SPI1
[bsp][lpc55sxx] Added drv_soft_spi functionality and fixed drv_soft_i2c pin errors (#7251) 1.lpc55sxx添加软件模拟SPI驱动 2.lpc55s69 board在Kconfig中添加软件SPI配置项 3.lpc55s69添加通用GPIO引脚定义 4.lpc55s69修正Kconfig中关于软件i2c配置项
2023-04-24 07:30:42 +08:00
bool "Enable soft SPI1 BUS (software simulation)"
default n
[bsp][lpc55sxx]update: drv_soft_i2c drv_soft_spi 1.config pin in menuconfig; 2.update format; 3.chang soft_i2c name
2023-06-02 16:30:59 +08:00
if BSP_USING_SOFT_SPI1
comment "Notice: num = 32 * PORTx + PINx + 1"
comment "1_11 --> 44; 0_15 --> 16; 1_8 --> 41"
config BSP_S_SPI1_SCK_PIN
int "sspi1 SCL pin number"
default 44
config BSP_S_SPI1_MOSI_PIN
int "sspi1 MISO pin number"
default 16
config BSP_S_SPI1_MISO_PIN
int "sspi1 MOSI pin number"
default 41
endif
[bsp][lpc55sxx] Added drv_soft_spi functionality and fixed drv_soft_i2c pin errors (#7251) 1.lpc55sxx添加软件模拟SPI驱动 2.lpc55s69 board在Kconfig中添加软件SPI配置项 3.lpc55s69添加通用GPIO引脚定义 4.lpc55s69修正Kconfig中关于软件i2c配置项
2023-04-24 07:30:42 +08:00
[bsp][lpc55sxx]update: drv_soft_i2c drv_soft_spi 1.config pin in menuconfig; 2.update format; 3.chang soft_i2c name
2023-06-02 16:30:59 +08:00
config BSP_USING_SOFT_SPI2
[bsp][lpc55sxx] Added drv_soft_spi functionality and fixed drv_soft_i2c pin errors (#7251) 1.lpc55sxx添加软件模拟SPI驱动 2.lpc55s69 board在Kconfig中添加软件SPI配置项 3.lpc55s69添加通用GPIO引脚定义 4.lpc55s69修正Kconfig中关于软件i2c配置项
2023-04-24 07:30:42 +08:00
bool "Enable soft SPI2 BUS (software simulation)"
default n
[bsp][lpc55sxx]update: drv_soft_i2c drv_soft_spi 1.config pin in menuconfig; 2.update format; 3.chang soft_i2c name
2023-06-02 16:30:59 +08:00
if BSP_USING_SOFT_SPI2
comment "Notice: num = 32 * PORTx + PINx + 1"
comment "1_9 --> 42; 0_18 --> 19; 1_10 --> 43"
config BSP_S_SPI2_SCK_PIN
int "sspi2 SCL pin number"
default 42
config BSP_S_SPI2_MOSI_PIN
int "sspi2 MISO pin number"
default 19
config BSP_S_SPI2_MISO_PIN
int "sspi2 MOSI pin number"
default 43
endif
[bsp][lpc55sxx] Added drv_soft_spi functionality and fixed drv_soft_i2c pin errors (#7251) 1.lpc55sxx添加软件模拟SPI驱动 2.lpc55s69 board在Kconfig中添加软件SPI配置项 3.lpc55s69添加通用GPIO引脚定义 4.lpc55s69修正Kconfig中关于软件i2c配置项
2023-04-24 07:30:42 +08:00
endif
added LPC55S6x BSP
2019-10-24 17:56:09 +08:00
menuconfig BSP_USING_ADC
config BSP_USING_ADC
bool "Enable ADC Channel"
select RT_USING_ADC
[bsp][lpc55sxx]update Kconfig default and delete drv_led drv_key
2023-05-18 13:41:57 +08:00
default n
format Kconfig and sconscript
2023-01-09 10:14:23 +08:00
added LPC55S6x BSP
2019-10-24 17:56:09 +08:00
if BSP_USING_ADC
config BSP_USING_ADC0_CH0
bool "Enable ADC0 Channel0"
[bsp][lpc55sxx]update Kconfig default and delete drv_led drv_key
2023-05-18 13:41:57 +08:00
default n
added LPC55S6x BSP
2019-10-24 17:56:09 +08:00
config BSP_USING_ADC0_CH1
bool "Enable ADC0 Channel1"
default n
[rtduino][lpc55s69] 修正RTduino框架下的引脚错误 (#6963) 1.修正RTduino框架下的引脚错误 2.Kconfig新增RTduino依赖项 3.README文档完善 4.上传LPC55s69兼容arduino部分引脚图
2023-02-24 02:47:55 +08:00
config BSP_USING_ADC0_CH8
bool "Enable ADC0 Channel8"
default n
format sconscript Kconfig files
2023-03-19 07:28:58 +08:00
[rtduino][lpc55s69] 修正RTduino框架下的引脚错误 (#6963) 1.修正RTduino框架下的引脚错误 2.Kconfig新增RTduino依赖项 3.README文档完善 4.上传LPC55s69兼容arduino部分引脚图
2023-02-24 02:47:55 +08:00
config BSP_USING_ADC0_CH13
bool "Enable ADC0 Channel13"
default n
config BSP_USING_ADC0_CH26
bool "Enable ADC0 Channel26"
default n
added LPC55S6x BSP
2019-10-24 17:56:09 +08:00
endif
config BSP_USING_SDIO
bool "Enable SDIO SD Card Interface"
select RT_USING_SDIO
[bsp][lpc55] fix the console, add the us_delay,fix sdio to filesystem
2021-10-10 21:06:03 +08:00
select RT_USING_DFS
select RT_USING_DFS_ELMFAT
[bsp][lpc55sxx]update Kconfig default and delete drv_led drv_key
2023-05-18 13:41:57 +08:00
default n
added LPC55S6x BSP
2019-10-24 17:56:09 +08:00
config BSP_USING_RTC
bool "Enable RTC"
select RT_USING_RTC
[bsp][lpc55sxx]update Kconfig default and delete drv_led drv_key
2023-05-18 13:41:57 +08:00
default n
added LPC55S6x BSP
2019-10-24 17:56:09 +08:00
config BSP_USING_WDT
bool "Enable WatchDog"
select RT_USING_WDT
default n
menuconfig BSP_USING_HWTIMER
config BSP_USING_HWTIMER
bool "Enable Timer"
select RT_USING_HWTIMER
[bsp][lpc55sxx]update Kconfig default and delete drv_led drv_key
2023-05-18 13:41:57 +08:00
default n
added LPC55S6x BSP
2019-10-24 17:56:09 +08:00
if BSP_USING_HWTIMER
config BSP_USING_CTIMER0
bool "Enable CIMER0"
[bsp][lpc55sxx]update Kconfig default and delete drv_led drv_key
2023-05-18 13:41:57 +08:00
default n
added LPC55S6x BSP
2019-10-24 17:56:09 +08:00
config BSP_USING_CTIMER3
bool "Enable CIMER3"
default n
config BSP_USING_CTIMER4
bool "Enable CIMER4"
default n
endif
menuconfig BSP_USING_PWM
config BSP_USING_PWM
bool "Enable PWM"
select RT_USING_PWM
[bsp][lpc55sxx]update Kconfig default and delete drv_led drv_key
2023-05-18 13:41:57 +08:00
default n
added LPC55S6x BSP
2019-10-24 17:56:09 +08:00
if BSP_USING_PWM
[arduino][lpc55s69] : 对接RTduino
2023-02-22 10:56:39 +08:00
config BSP_USING_CTIMER1_MAT0
bool "Enable CIMER1 Match0 as PWM output"
[bsp][lpc55sxx]update Kconfig default and delete drv_led drv_key
2023-05-18 13:41:57 +08:00
default n
[arduino][lpc55s69] : 对接RTduino
2023-02-22 10:56:39 +08:00
added LPC55S6x BSP
2019-10-24 17:56:09 +08:00
config BSP_USING_CTIMER2_MAT0
bool "Enable CIMER2 Match0 as PWM output"
[bsp][lpc55sxx] update pwm driver
2023-03-01 06:37:09 +08:00
default n
added LPC55S6x BSP
2019-10-24 17:56:09 +08:00
config BSP_USING_CTIMER2_MAT1
bool "Enable CIMER2 Match1 as PWM output"
default n
config BSP_USING_CTIMER2_MAT2
bool "Enable CIMER2 Match2 as PWM output"
default n
[arduino][lpc55s69] : 对接RTduino
2023-02-22 10:56:39 +08:00
config BSP_USING_CTIMER3_MAT2
bool "Enable CIMER3 Match2 as PWM output"
default n
added LPC55S6x BSP
2019-10-24 17:56:09 +08:00
endif
endmenu
menu "Onboard Peripheral Drivers"
config BSP_USING_MMA8562
bool "Enable MMA8562"
select BSP_USING_I2C4
[bsp][lpc55sxx]update Kconfig default and delete drv_led drv_key
2023-05-18 13:41:57 +08:00
default n
added LPC55S6x BSP
2019-10-24 17:56:09 +08:00
if BSP_USING_MMA8562
config BSP_USING_MMA8562I2C
string "the device name for 3-Axis Sensor"
default "i2c4"
endif
[arduino][lpc55s69] : 对接RTduino
2023-02-22 10:56:39 +08:00
config BSP_USING_ARDUINO
bool "Compatible with Arduino Ecosystem (RTduino)"
select PKG_USING_RTDUINO
[rtduino][lpc55s69] 纠正uart引脚错误并使能相关依赖项 (#6976) * [rtduino][lpc55s69] 纠正uart引脚错误并使能相关依赖项 Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2023-02-25 14:28:03 +08:00
select BSP_USING_UART2
[arduino][lpc55s69] : 对接RTduino
2023-02-22 10:56:39 +08:00
select BSP_USING_GPIO
select BSP_USING_ADC
select BSP_USING_ADC0
[bsp][lpc55sxx]update drv_adc
2023-05-29 16:25:58 +08:00
select BSP_USING_ADC0_CH0
[arduino][lpc55s69] : 对接RTduino
2023-02-22 10:56:39 +08:00
select BSP_USING_PWM
select BSP_USING_CTIMER1_MAT0
select BSP_USING_CTIMER2_MAT0
select BSP_USING_CTIMER2_MAT1
select BSP_USING_CTIMER2_MAT2
select BSP_USING_I2C
select BSP_USING_I2C1
imply RTDUINO_USING_SERVO
imply RTDUINO_USING_WIRE
default n
added LPC55S6x BSP
2019-10-24 17:56:09 +08:00
endmenu
menu "Board extended module Drivers"
[bsp][lpc55sxx]add: drv_lcd and drv_touch (#7569)
2023-05-31 11:40:19 +08:00
menuconfig BSP_USING_NXP_LCDM_S
config BSP_USING_NXP_LCDM_S
bool "Enable NXP LCD"
select BSP_USING_LCD
select BSP_USING_TOUCH
select BSP_USING_I2C
select BSP_USING_SPI
default n
menuconfig BSP_USING_LCD
config BSP_USING_LCD
bool "Enable LCD"
select BSP_USING_SPI
default n
if BSP_USING_LCD
config BSP_LCD_SPI_BUS
string "the spi bus for lcd"
default "spi3"
config BSP_LCD_CS_PIN
int "the pin of lcd cs"
default 5
config BSP_LCD_RST_PIN
int "the pin of lcd rst"
default 55
config BSP_LCD_DC_PIN
int "the pin of lcd dc"
default 3
endif
menuconfig BSP_USING_TOUCH
config BSP_USING_TOUCH
bool "Enable TOUCH"
select BSP_USING_I2C
default n
if BSP_USING_TOUCH
config BSP_TOUCH_I2C_BUS
string "the i2c bus for lcd"
default "i2c1"
endif
added LPC55S6x BSP
2019-10-24 17:56:09 +08:00
[bsp][lpc55sxx]add: adaptation LVGL (#7585)
2023-05-31 12:50:19 +08:00
config BSP_USING_LVGL
bool "Enable LVGL for LCD"
select PKG_USING_LVGL
select BSP_USING_NXP_LCDM_S
default n
if BSP_USING_LVGL
config BSP_USING_LVGL_DEMO
bool "Enable LVGL demo"
default y
endif
added LPC55S6x BSP
2019-10-24 17:56:09 +08:00
endmenu
endmenu