372 lines
11 KiB
C
372 lines
11 KiB
C
|
/*!
|
||
|
|
\file system_gd32e230.c
|
||
|
|
\brief CMSIS Cortex-M23 Device Peripheral Access Layer Source File for
|
||
|
|
GD32E1x0 Device Series
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Copyright (c) 2012 ARM LIMITED
|
||
|
|
|
||
|
|
All rights reserved.
|
||
|
|
Redistribution and use in source and binary forms, with or without
|
||
|
|
modification, are permitted provided that the following conditions are met:
|
||
|
|
- Redistributions of source code must retain the above copyright
|
||
|
|
notice, this list of conditions and the following disclaimer.
|
||
|
|
- Redistributions in binary form must reproduce the above copyright
|
||
|
|
notice, this list of conditions and the following disclaimer in the
|
||
|
|
documentation and/or other materials provided with the distribution.
|
||
|
|
- Neither the name of ARM nor the names of its contributors may be used
|
||
|
|
to endorse or promote products derived from this software without
|
||
|
|
specific prior written permission.
|
||
|
|
*
|
||
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||
|
|
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||
|
|
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||
|
|
ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
|
||
|
|
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||
|
|
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
||
|
|
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
||
|
|
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
||
|
|
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||
|
|
POSSIBILITY OF SUCH DAMAGE.
|
||
|
|
---------------------------------------------------------------------------*/
|
||
|
|
|
||
|
|
/* This file refers the CMSIS standard, some adjustments are made according to GigaDevice chips */
|
||
|
|
|
||
|
|
#include "gd32e230.h"
|
||
|
|
|
||
|
|
/* system frequency define */
|
||
|
|
#define __IRC8M (IRC8M_VALUE) /* internal 8 MHz RC oscillator frequency */
|
||
|
|
#define __HXTAL (HXTAL_VALUE) /* high speed crystal oscillator frequency */
|
||
|
|
#define __SYS_OSC_CLK (__IRC8M) /* main oscillator frequency */
|
||
|
|
|
||
|
|
#define VECT_TAB_OFFSET (uint32_t)0x00 /* vector table base offset */
|
||
|
|
|
||
|
|
/* select a system clock by uncommenting the following line */
|
||
|
|
//#define __SYSTEM_CLOCK_8M_HXTAL (__HXTAL)
|
||
|
|
//#define __SYSTEM_CLOCK_8M_IRC8M (__IRC8M)
|
||
|
|
#define __SYSTEM_CLOCK_72M_PLL_HXTAL (uint32_t)(72000000)
|
||
|
|
//#define __SYSTEM_CLOCK_72M_PLL_IRC8M_DIV2 (uint32_t)(72000000)
|
||
|
|
|
||
|
|
#define SEL_IRC8M 0x00
|
||
|
|
#define SEL_HXTAL 0x01
|
||
|
|
#define SEL_PLL 0x02
|
||
|
|
|
||
|
|
/* set the system clock frequency and declare the system clock configuration function */
|
||
|
|
#ifdef __SYSTEM_CLOCK_8M_HXTAL
|
||
|
|
uint32_t SystemCoreClock = __SYSTEM_CLOCK_8M_HXTAL;
|
||
|
|
static void system_clock_8m_hxtal(void);
|
||
|
|
|
||
|
|
#elif defined (__SYSTEM_CLOCK_72M_PLL_HXTAL)
|
||
|
|
uint32_t SystemCoreClock = __SYSTEM_CLOCK_72M_PLL_HXTAL;
|
||
|
|
static void system_clock_72m_hxtal(void);
|
||
|
|
|
||
|
|
#elif defined (__SYSTEM_CLOCK_72M_PLL_IRC8M_DIV2)
|
||
|
|
uint32_t SystemCoreClock = __SYSTEM_CLOCK_72M_PLL_IRC8M_DIV2;
|
||
|
|
static void system_clock_72m_irc8m(void);
|
||
|
|
|
||
|
|
#else
|
||
|
|
uint32_t SystemCoreClock = __SYSTEM_CLOCK_8M_IRC8M;
|
||
|
|
static void system_clock_8m_irc8m(void);
|
||
|
|
#endif /* __SYSTEM_CLOCK_8M_HXTAL */
|
||
|
|
|
||
|
|
/* configure the system clock */
|
||
|
|
static void system_clock_config(void);
|
||
|
|
|
||
|
|
/*!
|
||
|
|
\brief setup the microcontroller system, initialize the system
|
||
|
|
\param[in] none
|
||
|
|
\param[out] none
|
||
|
|
\retval none
|
||
|
|
*/
|
||
|
|
void SystemInit (void)
|
||
|
|
{
|
||
|
|
/* enable IRC8M */
|
||
|
|
RCU_CTL0 |= RCU_CTL0_IRC8MEN;
|
||
|
|
while(0U == (RCU_CTL0 & RCU_CTL0_IRC8MSTB)){
|
||
|
|
}
|
||
|
|
/* reset RCU */
|
||
|
|
RCU_CFG0 &= ~(RCU_CFG0_SCS | RCU_CFG0_AHBPSC | RCU_CFG0_APB1PSC | RCU_CFG0_APB2PSC |\
|
||
|
|
RCU_CFG0_ADCPSC | RCU_CFG0_CKOUTSEL | RCU_CFG0_CKOUTDIV | RCU_CFG0_PLLDV);
|
||
|
|
RCU_CFG0 &= ~(RCU_CFG0_PLLSEL | RCU_CFG0_PLLMF | RCU_CFG0_PLLMF4 | RCU_CFG0_PLLDV);
|
||
|
|
RCU_CTL0 &= ~(RCU_CTL0_HXTALEN | RCU_CTL0_CKMEN | RCU_CTL0_PLLEN | RCU_CTL0_HXTALBPS);
|
||
|
|
RCU_CFG1 &= ~(RCU_CFG1_PREDV);
|
||
|
|
RCU_CFG2 &= ~(RCU_CFG2_USART0SEL | RCU_CFG2_ADCSEL);
|
||
|
|
RCU_CFG2 &= ~RCU_CFG2_IRC28MDIV;
|
||
|
|
RCU_CFG2 &= ~RCU_CFG2_ADCPSC2;
|
||
|
|
RCU_CTL1 &= ~RCU_CTL1_IRC28MEN;
|
||
|
|
RCU_INT = 0x00000000U;
|
||
|
|
|
||
|
|
/* configure system clock */
|
||
|
|
system_clock_config();
|
||
|
|
|
||
|
|
#ifdef VECT_TAB_SRAM
|
||
|
|
nvic_vector_table_set(NVIC_VECTTAB_RAM,VECT_TAB_OFFSET);
|
||
|
|
#else
|
||
|
|
nvic_vector_table_set(NVIC_VECTTAB_FLASH,VECT_TAB_OFFSET);
|
||
|
|
#endif
|
||
|
|
}
|
||
|
|
|
||
|
|
/*!
|
||
|
|
\brief configure the system clock
|
||
|
|
\param[in] none
|
||
|
|
\param[out] none
|
||
|
|
\retval none
|
||
|
|
*/
|
||
|
|
static void system_clock_config(void)
|
||
|
|
{
|
||
|
|
#ifdef __SYSTEM_CLOCK_8M_HXTAL
|
||
|
|
system_clock_8m_hxtal();
|
||
|
|
#elif defined (__SYSTEM_CLOCK_72M_PLL_HXTAL)
|
||
|
|
system_clock_72m_hxtal();
|
||
|
|
#elif defined (__SYSTEM_CLOCK_72M_PLL_IRC8M_DIV2)
|
||
|
|
system_clock_72m_irc8m();
|
||
|
|
#elif defined (__SYSTEM_CLOCK_72M_PLL_IRC48M_DIV2)
|
||
|
|
system_clock_72m_irc48m();
|
||
|
|
#else
|
||
|
|
system_clock_8m_irc8m();
|
||
|
|
#endif /* __SYSTEM_CLOCK_8M_HXTAL */
|
||
|
|
}
|
||
|
|
|
||
|
|
#ifdef __SYSTEM_CLOCK_8M_HXTAL
|
||
|
|
/*!
|
||
|
|
\brief configure the system clock to 8M by HXTAL
|
||
|
|
\param[in] none
|
||
|
|
\param[out] none
|
||
|
|
\retval none
|
||
|
|
*/
|
||
|
|
static void system_clock_8m_hxtal(void)
|
||
|
|
{
|
||
|
|
uint32_t timeout = 0U;
|
||
|
|
uint32_t stab_flag = 0U;
|
||
|
|
|
||
|
|
/* enable HXTAL */
|
||
|
|
RCU_CTL0 |= RCU_CTL0_HXTALEN;
|
||
|
|
|
||
|
|
/* wait until HXTAL is stable or the startup time is longer than HXTAL_STARTUP_TIMEOUT */
|
||
|
|
do{
|
||
|
|
timeout++;
|
||
|
|
stab_flag = (RCU_CTL0 & RCU_CTL0_HXTALSTB);
|
||
|
|
}
|
||
|
|
while((0U == stab_flag) && (HXTAL_STARTUP_TIMEOUT != timeout));
|
||
|
|
/* if fail */
|
||
|
|
if(0U == (RCU_CTL0 & RCU_CTL0_HXTALSTB)){
|
||
|
|
while(1){
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
/* HXTAL is stable */
|
||
|
|
/* AHB = SYSCLK */
|
||
|
|
RCU_CFG0 |= RCU_AHB_CKSYS_DIV1;
|
||
|
|
/* APB2 = AHB */
|
||
|
|
RCU_CFG0 |= RCU_APB2_CKAHB_DIV1;
|
||
|
|
/* APB1 = AHB */
|
||
|
|
RCU_CFG0 |= RCU_APB1_CKAHB_DIV1;
|
||
|
|
|
||
|
|
/* select HXTAL as system clock */
|
||
|
|
RCU_CFG0 &= ~RCU_CFG0_SCS;
|
||
|
|
RCU_CFG0 |= RCU_CKSYSSRC_HXTAL;
|
||
|
|
|
||
|
|
/* wait until HXTAL is selected as system clock */
|
||
|
|
while(0U == (RCU_CFG0 & RCU_SCSS_HXTAL)){
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
#elif defined (__SYSTEM_CLOCK_72M_PLL_HXTAL)
|
||
|
|
/*!
|
||
|
|
\brief configure the system clock to 72M by PLL which selects HXTAL as its clock source
|
||
|
|
\param[in] none
|
||
|
|
\param[out] none
|
||
|
|
\retval none
|
||
|
|
*/
|
||
|
|
static void system_clock_72m_hxtal(void)
|
||
|
|
{
|
||
|
|
uint32_t timeout = 0U;
|
||
|
|
uint32_t stab_flag = 0U;
|
||
|
|
|
||
|
|
/* enable HXTAL */
|
||
|
|
RCU_CTL0 |= RCU_CTL0_HXTALEN;
|
||
|
|
|
||
|
|
/* wait until HXTAL is stable or the startup time is longer than HXTAL_STARTUP_TIMEOUT */
|
||
|
|
do{
|
||
|
|
timeout++;
|
||
|
|
stab_flag = (RCU_CTL0 & RCU_CTL0_HXTALSTB);
|
||
|
|
}
|
||
|
|
while((0U == stab_flag) && (HXTAL_STARTUP_TIMEOUT != timeout));
|
||
|
|
/* if fail */
|
||
|
|
if(0U == (RCU_CTL0 & RCU_CTL0_HXTALSTB)){
|
||
|
|
while(1){
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
FMC_WS &= ~FMC_WS_WSCNT;
|
||
|
|
FMC_WS |= WS_WSCNT_2;
|
||
|
|
|
||
|
|
/* HXTAL is stable */
|
||
|
|
/* AHB = SYSCLK */
|
||
|
|
RCU_CFG0 |= RCU_AHB_CKSYS_DIV1;
|
||
|
|
/* APB2 = AHB */
|
||
|
|
RCU_CFG0 |= RCU_APB2_CKAHB_DIV1;
|
||
|
|
/* APB1 = AHB */
|
||
|
|
RCU_CFG0 |= RCU_APB1_CKAHB_DIV1;
|
||
|
|
|
||
|
|
/* PLL = HXTAL * 9 = 72 MHz */
|
||
|
|
RCU_CFG0 &= ~(RCU_CFG0_PLLSEL | RCU_CFG0_PLLMF | RCU_CFG0_PLLDV);
|
||
|
|
RCU_CFG0 |= (RCU_PLLSRC_HXTAL | RCU_PLL_MUL9);
|
||
|
|
|
||
|
|
/* enable PLL */
|
||
|
|
RCU_CTL0 |= RCU_CTL0_PLLEN;
|
||
|
|
|
||
|
|
/* wait until PLL is stable */
|
||
|
|
while(0U == (RCU_CTL0 & RCU_CTL0_PLLSTB)){
|
||
|
|
}
|
||
|
|
|
||
|
|
/* select PLL as system clock */
|
||
|
|
RCU_CFG0 &= ~RCU_CFG0_SCS;
|
||
|
|
RCU_CFG0 |= RCU_CKSYSSRC_PLL;
|
||
|
|
|
||
|
|
/* wait until PLL is selected as system clock */
|
||
|
|
while(0U == (RCU_CFG0 & RCU_SCSS_PLL)){
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
#elif defined (__SYSTEM_CLOCK_72M_PLL_IRC8M_DIV2)
|
||
|
|
/*!
|
||
|
|
\brief configure the system clock to 72M by PLL which selects IRC8M/2 as its clock source
|
||
|
|
\param[in] none
|
||
|
|
\param[out] none
|
||
|
|
\retval none
|
||
|
|
*/
|
||
|
|
static void system_clock_72m_irc8m(void)
|
||
|
|
{
|
||
|
|
uint32_t timeout = 0U;
|
||
|
|
uint32_t stab_flag = 0U;
|
||
|
|
|
||
|
|
/* enable IRC8M */
|
||
|
|
RCU_CTL0 |= RCU_CTL0_IRC8MEN;
|
||
|
|
|
||
|
|
/* wait until IRC8M is stable or the startup time is longer than IRC8M_STARTUP_TIMEOUT */
|
||
|
|
do{
|
||
|
|
timeout++;
|
||
|
|
stab_flag = (RCU_CTL0 & RCU_CTL0_IRC8MSTB);
|
||
|
|
}
|
||
|
|
while((0U == stab_flag) && (IRC8M_STARTUP_TIMEOUT != timeout));
|
||
|
|
|
||
|
|
/* if fail */
|
||
|
|
if(0U == (RCU_CTL0 & RCU_CTL0_IRC8MSTB)){
|
||
|
|
while(1){
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
FMC_WS &= ~FMC_WS_WSCNT;
|
||
|
|
FMC_WS |= WS_WSCNT_2;
|
||
|
|
|
||
|
|
/* AHB = SYSCLK */
|
||
|
|
RCU_CFG0 |= RCU_AHB_CKSYS_DIV1;
|
||
|
|
/* APB2 = AHB */
|
||
|
|
RCU_CFG0 |= RCU_APB2_CKAHB_DIV1;
|
||
|
|
/* APB1 = AHB */
|
||
|
|
RCU_CFG0 |= RCU_APB1_CKAHB_DIV1;
|
||
|
|
/* PLL = (IRC8M/2) * 18 = 72 MHz */
|
||
|
|
RCU_CFG0 &= ~(RCU_CFG0_PLLSEL | RCU_CFG0_PLLMF);
|
||
|
|
RCU_CFG0 |= (RCU_PLLSRC_IRC8M_DIV2 | RCU_PLL_MUL18);
|
||
|
|
|
||
|
|
/* enable PLL */
|
||
|
|
RCU_CTL0 |= RCU_CTL0_PLLEN;
|
||
|
|
|
||
|
|
/* wait until PLL is stable */
|
||
|
|
while(0U == (RCU_CTL0 & RCU_CTL0_PLLSTB)){
|
||
|
|
}
|
||
|
|
|
||
|
|
/* select PLL as system clock */
|
||
|
|
RCU_CFG0 &= ~RCU_CFG0_SCS;
|
||
|
|
RCU_CFG0 |= RCU_CKSYSSRC_PLL;
|
||
|
|
|
||
|
|
/* wait until PLL is selected as system clock */
|
||
|
|
while(0U == (RCU_CFG0 & RCU_SCSS_PLL)){
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
#else
|
||
|
|
/*!
|
||
|
|
\brief configure the system clock to 8M by IRC8M
|
||
|
|
\param[in] none
|
||
|
|
\param[out] none
|
||
|
|
\retval none
|
||
|
|
*/
|
||
|
|
static void system_clock_8m_irc8m(void)
|
||
|
|
{
|
||
|
|
/* AHB = SYSCLK */
|
||
|
|
RCU_CFG0 |= RCU_AHB_CKSYS_DIV1;
|
||
|
|
/* APB2 = AHB */
|
||
|
|
RCU_CFG0 |= RCU_APB2_CKAHB_DIV1;
|
||
|
|
/* APB1 = AHB */
|
||
|
|
RCU_CFG0 |= RCU_APB1_CKAHB_DIV1;
|
||
|
|
|
||
|
|
/* select IRC8M as system clock */
|
||
|
|
RCU_CFG0 &= ~RCU_CFG0_SCS;
|
||
|
|
RCU_CFG0 |= RCU_CKSYSSRC_IRC8M;
|
||
|
|
|
||
|
|
/* wait until IRC8M is selected as system clock */
|
||
|
|
while(0U != (RCU_CFG0 & RCU_SCSS_IRC8M)){
|
||
|
|
}
|
||
|
|
}
|
||
|
|
#endif /* __SYSTEM_CLOCK_8M_HXTAL */
|
||
|
|
|
||
|
|
/*!
|
||
|
|
\brief update the SystemCoreClock with current core clock retrieved from cpu registers
|
||
|
|
\param[in] none
|
||
|
|
\param[out] none
|
||
|
|
\retval none
|
||
|
|
*/
|
||
|
|
void SystemCoreClockUpdate (void)
|
||
|
|
{
|
||
|
|
uint32_t sws = 0U;
|
||
|
|
uint32_t pllmf = 0U, pllmf4 = 0U, pllsel = 0U, prediv = 0U, idx = 0U, clk_exp = 0U;
|
||
|
|
/* exponent of AHB clock divider */
|
||
|
|
const uint8_t ahb_exp[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
|
||
|
|
|
||
|
|
sws = GET_BITS(RCU_CFG0, 2, 3);
|
||
|
|
switch(sws){
|
||
|
|
/* IRC8M is selected as CK_SYS */
|
||
|
|
case SEL_IRC8M:
|
||
|
|
SystemCoreClock = IRC8M_VALUE;
|
||
|
|
break;
|
||
|
|
/* HXTAL is selected as CK_SYS */
|
||
|
|
case SEL_HXTAL:
|
||
|
|
SystemCoreClock = HXTAL_VALUE;
|
||
|
|
break;
|
||
|
|
/* PLL is selected as CK_SYS */
|
||
|
|
case SEL_PLL:
|
||
|
|
/* get the value of PLLMF[3:0] */
|
||
|
|
pllmf = GET_BITS(RCU_CFG0, 18, 21);
|
||
|
|
pllmf4 = GET_BITS(RCU_CFG0, 27, 27);
|
||
|
|
/* high 16 bits */
|
||
|
|
if(1U == pllmf4){
|
||
|
|
pllmf += 17U;
|
||
|
|
}else if(15U == pllmf){
|
||
|
|
pllmf = 16U;
|
||
|
|
}else{
|
||
|
|
pllmf += 2U;
|
||
|
|
}
|
||
|
|
|
||
|
|
/* PLL clock source selection, HXTAL or IRC8M/2 */
|
||
|
|
pllsel = GET_BITS(RCU_CFG0, 16, 16);
|
||
|
|
if(0U != pllsel){
|
||
|
|
prediv = (GET_BITS(RCU_CFG1, 0, 3) + 1U);
|
||
|
|
SystemCoreClock = (HXTAL_VALUE / prediv) * pllmf;
|
||
|
|
}else{
|
||
|
|
SystemCoreClock = (IRC8M_VALUE >> 1) * pllmf;
|
||
|
|
}
|
||
|
|
break;
|
||
|
|
/* IRC8M is selected as CK_SYS */
|
||
|
|
default:
|
||
|
|
SystemCoreClock = IRC8M_VALUE;
|
||
|
|
break;
|
||
|
|
}
|
||
|
|
/* calculate AHB clock frequency */
|
||
|
|
idx = GET_BITS(RCU_CFG0, 4, 7);
|
||
|
|
clk_exp = ahb_exp[idx];
|
||
|
|
SystemCoreClock >>= clk_exp;
|
||
|
|
}
|