276 lines
13 KiB
C
276 lines
13 KiB
C
/**************************************************************************//**
|
|
* @file pwm.h
|
|
* @version V1.00
|
|
* $Revision: 8 $
|
|
* $Date: 14/01/28 10:49a $
|
|
* @brief M051 series PWM driver header file
|
|
*
|
|
* @note
|
|
* Copyright (C) 2014 Nuvoton Technology Corp. All rights reserved.
|
|
*****************************************************************************/
|
|
#ifndef __PWM_H__
|
|
#define __PWM_H__
|
|
|
|
#ifdef __cplusplus
|
|
extern "C"
|
|
{
|
|
#endif
|
|
|
|
|
|
/** @addtogroup M051_Device_Driver M051 Device Driver
|
|
@{
|
|
*/
|
|
|
|
/** @addtogroup M051_PWM_Driver PWM Driver
|
|
@{
|
|
*/
|
|
|
|
/** @addtogroup M051_PWM_EXPORTED_CONSTANTS PWM Exported Constants
|
|
@{
|
|
*/
|
|
#define PWM_CHANNEL_NUM (4) /*!< PWM channel number */
|
|
#define PWM_CLK_DIV_1 (4UL) /*!< PWM clock divide by 1 */
|
|
#define PWM_CLK_DIV_2 (0UL) /*!< PWM clock divide by 2 */
|
|
#define PWM_CLK_DIV_4 (1UL) /*!< PWM clock divide by 4 */
|
|
#define PWM_CLK_DIV_8 (2UL) /*!< PWM clock divide by 8 */
|
|
#define PWM_CLK_DIV_16 (3UL) /*!< PWM clock divide by 16 */
|
|
#define PWM_EDGE_ALIGNED (0UL) /*!< PWM working in edge aligned type */
|
|
#define PWM_CENTER_ALIGNED (1UL) /*!< PWM working in center aligned type */
|
|
#define PWM_DUTY_TRIGGER_ADC (PWM_TCON_PWM0DTEN_Msk) /*!< PWM trigger ADC while counter matches CMR in edge-aligned or center-aligned mode */
|
|
#define PWM_PERIOD_TRIGGER_ADC (PWM_TCON_PWM0TEN_Msk) /*!< PWM trigger ADC while counter matches 0 in edge-aligned mode or matches (CNR+1) or zero in center-aligned mode */
|
|
#define PWM_DUTY_INT_DOWN_COUNT_MATCH_CMR (0) /*!< PWM duty interrupt triggered if down count match CMR */
|
|
#define PWM_DUTY_INT_UP_COUNT_MATCH_CMR (PWM_PIER_INT01DTYPE_Msk) /*!< PWM duty interrupt triggered if up down match CMR */
|
|
#define PWM_PERIOD_INT_UNDERFLOW (0) /*!< PWM period interrupt triggered if counter underflow */
|
|
#define PWM_PERIOD_INT_MATCH_CNR (PWM_PIER_INT01TYPE_Msk) /*!< PWM period interrupt triggered if counter match CNR */
|
|
#define PWM_CAPTURE_INT_RISING_LATCH (PWM_CCR0_CRL_IE0_Msk) /*!< PWM capture interrupt if channel has rising transition */
|
|
#define PWM_CAPTURE_INT_FALLING_LATCH (PWM_CCR0_CFL_IE0_Msk) /*!< PWM capture interrupt if channel has falling transition */
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
/* PWM Group channel number constants definitions */
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
#define PWM_CH0 0x0 /*!< PWM Group A/B channel 0 */
|
|
#define PWM_CH1 0x1 /*!< PWM Group A/B channel 1 */
|
|
#define PWM_CH2 0x2 /*!< PWM Group A/B channel 2 */
|
|
#define PWM_CH3 0x3 /*!< PWM Group A/B channel 3 */
|
|
#define PWM_CCR_MASK 0x000F000F /*!< PWM CCR0/CCR2 bit0~3 and bit16~19 mask */
|
|
|
|
/*@}*/ /* end of group M051_PWM_EXPORTED_CONSTANTS */
|
|
|
|
|
|
/** @addtogroup M051_PWM_EXPORTED_FUNCTIONS PWM Exported Functions
|
|
@{
|
|
*/
|
|
|
|
/**
|
|
* @brief Enable timer synchronous mode of specified channel(s)
|
|
* @param[in] pwm The base address of PWM module
|
|
* - PWMA : PWM Group A
|
|
* - PWMB : PWM Group B
|
|
* @param[in] u32ChannelMask Combination of enabled channels. Each bit corresponds to a channel
|
|
* Bit 0 represents channel 0, bit 1 represents channel 1...
|
|
* @return None
|
|
* @details This macro is used to enable timer synchronous mode of specified channel(s)
|
|
*/
|
|
#define PWM_ENABLE_TIMER_SYNC(pwm, u32ChannelMask) \
|
|
do{ \
|
|
int i;\
|
|
for(i = 0; i < 4; i++) { \
|
|
if((u32ChannelMask) & (1 << i)) \
|
|
(pwm)->PSCR |= (PWM_PSCR_PSSEN0_Msk << (i * 8)); \
|
|
} \
|
|
}while(0)
|
|
|
|
/**
|
|
* @brief Disable timer synchronous mode of specified channel(s)
|
|
* @param[in] pwm The base address of PWM module
|
|
* - PWMA : PWM Group A
|
|
* - PWMB : PWM Group B
|
|
* @param[in] u32ChannelMask Combination of enabled channels. Each bit corresponds to a channel
|
|
* Bit 0 represents channel 0, bit 1 represents channel 1...
|
|
* @return None
|
|
* @details This macro is used to disable timer synchronous mode of specified channel(s)
|
|
*/
|
|
#define PWM_DISABLE_TIMER_SYNC(pwm, u32ChannelMask) \
|
|
do{ \
|
|
int i;\
|
|
for(i = 0; i < 4; i++) { \
|
|
if((u32ChannelMask) & (1 << i)) \
|
|
(pwm)->PSCR &= ~(PWM_PSCR_PSSEN0_Msk << (i * 8)); \
|
|
} \
|
|
}while(0)
|
|
|
|
/**
|
|
* @brief Enable output inverter of specified channel(s)
|
|
* @param[in] pwm The base address of PWM module
|
|
* - PWMA : PWM Group A
|
|
* - PWMB : PWM Group B
|
|
* @param[in] u32ChannelMask Combination of enabled channels. Each bit corresponds to a channel
|
|
* Bit 0 represents channel 0, bit 1 represents channel 1...
|
|
* @return None
|
|
* @details This macro is used to enable capture input inverter for specified channel(s)
|
|
*/
|
|
#define PWM_ENABLE_OUTPUT_INVERTER(pwm, u32ChannelMask) \
|
|
do{ \
|
|
int i;\
|
|
(pwm)->PCR &= ~(PWM_PCR_CH0INV_Msk|PWM_PCR_CH1INV_Msk|PWM_PCR_CH2INV_Msk|PWM_PCR_CH3INV_Msk);\
|
|
for(i = 0; i < 4; i++) { \
|
|
if((u32ChannelMask) & (1 << i)) \
|
|
(pwm)->PCR |= (PWM_PCR_CH0INV_Msk << (PWM_PCR_CH0INV_Pos * (i * 4))); \
|
|
} \
|
|
}while(0)
|
|
|
|
/**
|
|
* @brief Get captured rising data of specified channel
|
|
* @param[in] pwm The base address of PWM module
|
|
* - PWMA : PWM Group A
|
|
* - PWMB : PWM Group B
|
|
* @param[in] u32ChannelNum PWM channel number. Valid values are between 0~3
|
|
* @return uint32_t Return the timer counter, 0~0xFFFF
|
|
* @details This macro is used to get captured rising data for specified channel
|
|
*/
|
|
#define PWM_GET_CAPTURE_RISING_DATA(pwm, u32ChannelNum) (*((__IO uint32_t *) ((((uint32_t)&((pwm)->CRLR0)) + (u32ChannelNum) * 8))))
|
|
|
|
/**
|
|
* @brief Get captured falling data of specified channel
|
|
* @param[in] pwm The base address of PWM module
|
|
* - PWMA : PWM Group A
|
|
* - PWMB : PWM Group B
|
|
* @param[in] u32ChannelNum PWM channel number. Valid values are between 0~3
|
|
* @return uint32_t Return the timer counter, 0~0xFFFF
|
|
* @details This macro is used to get captured falling data for specified channel
|
|
*/
|
|
#define PWM_GET_CAPTURE_FALLING_DATA(pwm, u32ChannelNum) (*((__IO uint32_t *) ((((uint32_t)&((pwm)->CFLR0)) + (u32ChannelNum) * 8))))
|
|
|
|
/**
|
|
* @brief Set the prescaler of the selected channel
|
|
* @param[in] pwm The base address of PWM module
|
|
* - PWMA : PWM Group A
|
|
* - PWMB : PWM Group B
|
|
* @param[in] u32ChannelNum PWM channel number. Valid values are between 0~3
|
|
* @param[in] u32Prescaler Clock prescaler of specified channel. Valid values are between 1 ~ 0xFF
|
|
* @return None
|
|
* @details This macro is used to set timer pre-scale for specified channel
|
|
* @note - If u32Prescaler = 0, corresponding PWM-timer will be stopped
|
|
* - If u32Prescaler = x (x not equal to 0), it means Clock input is divided by (x + 1) before it is fed to the corresponding PWM counter.
|
|
*/
|
|
#define PWM_SET_PRESCALER(pwm, u32ChannelNum, u32Prescaler) \
|
|
((pwm)->PPR = ((pwm)->PPR & ~(PWM_PPR_CP01_Msk << (((u32ChannelNum) >> 1) * 8))) | ((u32Prescaler) << (((u32ChannelNum) >> 1) * 8)))
|
|
|
|
/**
|
|
* @brief Set the divider of the selected channel
|
|
* @param[in] pwm The base address of PWM module
|
|
* - PWMA : PWM Group A
|
|
* - PWMB : PWM Group B
|
|
* @param[in] u32ChannelNum PWM channel number. Valid values are between 0~3
|
|
* @param[in] u32Divider Clock divider of specified channel. Valid values are
|
|
* - \ref PWM_CLK_DIV_1
|
|
* - \ref PWM_CLK_DIV_2
|
|
* - \ref PWM_CLK_DIV_4
|
|
* - \ref PWM_CLK_DIV_8
|
|
* - \ref PWM_CLK_DIV_16
|
|
* @return None
|
|
* @details This macro is used to set Timer clock source divider selection for specified channel
|
|
*/
|
|
#define PWM_SET_DIVIDER(pwm, u32ChannelNum, u32Divider) \
|
|
((pwm)->CSR = ((pwm)->CSR & ~(PWM_CSR_CSR0_Msk << ((u32ChannelNum) * 4))) | ((u32Divider) << ((u32ChannelNum) * 4)))
|
|
|
|
/**
|
|
* @brief Set the duty of the selected channel
|
|
* @param[in] pwm The base address of PWM module
|
|
* - PWMA : PWM Group A
|
|
* - PWMB : PWM Group B
|
|
* @param[in] u32ChannelNum PWM channel number. Valid values are between 0~3
|
|
* @param[in] u32CMR Duty of specified channel. Valid values are between 0~0xFFFF
|
|
* @return None
|
|
* @details This macro is used to set PWM Comparator value for specified channel
|
|
* @note This new setting will take effect on next PWM period
|
|
*/
|
|
#define PWM_SET_CMR(pwm, u32ChannelNum, u32CMR) (*((__IO uint32_t *) ((((uint32_t)&((pwm)->CMR0)) + (u32ChannelNum) * 12))) = u32CMR)
|
|
|
|
/**
|
|
* @brief Set the period of the selected channel
|
|
* @param[in] pwm The base address of PWM module
|
|
* - PWMA : PWM Group A
|
|
* - PWMB : PWM Group B
|
|
* @param[in] u32ChannelNum PWM channel number. Valid values are between 0~3
|
|
* @param[in] u32CNR Period of specified channel. Valid values are between 0~0xFFFF
|
|
* @return None
|
|
* @details This macro is used to set timer loaded value(CNR) for specified channel.\n
|
|
* Loaded value determines the PWM period.
|
|
* @note This new setting will take effect on next PWM period
|
|
* @note PWM counter will stop if period length set to 0
|
|
*/
|
|
#define PWM_SET_CNR(pwm, u32ChannelNum, u32CNR) (*((__IO uint32_t *) ((((uint32_t)&((pwm)->CNR0)) + (u32ChannelNum) * 12))) = u32CNR)
|
|
|
|
/**
|
|
* @brief Set the PWM aligned type
|
|
* @param[in] pwm The base address of PWM module
|
|
* - PWMA : PWM Group A
|
|
* - PWMB : PWM Group B
|
|
* @param[in] u32ChannelMask Combination of enabled channels. Each bit corresponds to a channel
|
|
* Bit 0 represents channel 0, bit 1 represents channel 1...
|
|
* @param[in] u32AlignedType PWM aligned type, valid values are:
|
|
* - \ref PWM_EDGE_ALIGNED
|
|
* - \ref PWM_CENTER_ALIGNED
|
|
* @return None
|
|
* @details This macro is used to set the PWM aligned type
|
|
*/
|
|
#define PWM_SET_ALIGNED_TYPE(pwm, u32ChannelMask, u32AlignedType) \
|
|
do{ \
|
|
int i; \
|
|
for(i = 0; i < 4; i++) { \
|
|
if((u32ChannelMask) & (1 << i)) \
|
|
(pwm)->PCR = ((pwm)->PCR & ~(PWM_PCR_PWM01TYPE_Msk << (i >> 1))) | (u32AlignedType << (PWM_PCR_PWM01TYPE_Pos + (i >> 1))); \
|
|
} \
|
|
}while(0)
|
|
|
|
|
|
uint32_t PWM_ConfigCaptureChannel(PWM_T *pwm,
|
|
uint32_t u32ChannelNum,
|
|
uint32_t u32UnitTimeNsec,
|
|
uint32_t u32CaptureEdge);
|
|
uint32_t PWM_ConfigOutputChannel(PWM_T *pwm,
|
|
uint32_t u32ChannelNum,
|
|
uint32_t u32Frequncy,
|
|
uint32_t u32DutyCycle);
|
|
void PWM_Start(PWM_T *pwm, uint32_t u32ChannelMask);
|
|
void PWM_Stop(PWM_T *pwm, uint32_t u32ChannelMask);
|
|
void PWM_ForceStop(PWM_T *pwm, uint32_t u32ChannelMask);
|
|
void PWM_EnableADCTrigger(PWM_T *pwm, uint32_t u32ChannelNum, uint32_t u32Condition);
|
|
void PWM_DisableADCTrigger(PWM_T *pwm, uint32_t u32ChannelNum);
|
|
void PWM_ClearADCTriggerFlag(PWM_T *pwm, uint32_t u32ChannelNum, uint32_t u32Condition);
|
|
uint32_t PWM_GetADCTriggerFlag(PWM_T *pwm, uint32_t u32ChannelNum);
|
|
void PWM_EnableCapture(PWM_T *pwm, uint32_t u32ChannelMask);
|
|
void PWM_DisableCapture(PWM_T *pwm, uint32_t u32ChannelMask);
|
|
void PWM_EnableOutput(PWM_T *pwm, uint32_t u32ChannelMask);
|
|
void PWM_DisableOutput(PWM_T *pwm, uint32_t u32ChannelMask);
|
|
void PWM_EnableDeadZone(PWM_T *pwm, uint32_t u32ChannelNum, uint32_t u32Duration);
|
|
void PWM_DisableDeadZone(PWM_T *pwm, uint32_t u32ChannelNum);
|
|
void PWM_EnableCaptureInt(PWM_T *pwm, uint32_t u32ChannelNum, uint32_t u32Edge);
|
|
void PWM_DisableCaptureInt(PWM_T *pwm, uint32_t u32ChannelNum, uint32_t u32Edge);
|
|
void PWM_ClearCaptureIntFlag(PWM_T *pwm, uint32_t u32ChannelNum, uint32_t u32Edge);
|
|
uint32_t PWM_GetCaptureIntFlag(PWM_T *pwm, uint32_t u32ChannelNum);
|
|
void PWM_EnableDutyInt(PWM_T *pwm, uint32_t u32ChannelNum, uint32_t u32IntDutyType);
|
|
void PWM_DisableDutyInt(PWM_T *pwm, uint32_t u32ChannelNum);
|
|
void PWM_ClearDutyIntFlag(PWM_T *pwm, uint32_t u32ChannelNum);
|
|
uint32_t PWM_GetDutyIntFlag(PWM_T *pwm, uint32_t u32ChannelNum);
|
|
void PWM_EnablePeriodInt(PWM_T *pwm, uint32_t u32ChannelNum, uint32_t u32IntPeriodType);
|
|
void PWM_DisablePeriodInt(PWM_T *pwm, uint32_t u32ChannelNum);
|
|
void PWM_ClearPeriodIntFlag(PWM_T *pwm, uint32_t u32ChannelNum);
|
|
uint32_t PWM_GetPeriodIntFlag(PWM_T *pwm, uint32_t u32ChannelNum);
|
|
|
|
|
|
|
|
/*@}*/ /* end of group M051_PWM_EXPORTED_FUNCTIONS */
|
|
|
|
/*@}*/ /* end of group M051_PWM_Driver */
|
|
|
|
/*@}*/ /* end of group M051_Device_Driver */
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif //__PWM_H__
|
|
|
|
/*** (C) COPYRIGHT 2013 Nuvoton Technology Corp. ***/
|