rt-thread-official/bsp/nuvoton/numaker-m467hj
yangjie11 95e6b69b8e
sync and update all projects (#7138)
* sync and update
2023-03-31 16:49:48 +08:00
..
applications [components/drivers][touch]删除多余的touch.h (#7090) 2023-03-24 11:47:28 -04:00
board Fix building issue of Nuvoton porting. (#6833) 2023-01-11 16:26:56 +08:00
figures [bsp/nuvoton] Support NuMaker-M467HJ BSP and update drivers. (#6416) 2022-09-12 07:36:11 -04:00
linking_scripts [bsp/nuvoton] Support NuMaker-M467HJ BSP and update drivers. (#6416) 2022-09-12 07:36:11 -04:00
.config sync and update all projects (#7138) 2023-03-31 16:49:48 +08:00
Kconfig format Kconfig and sconscript 2023-01-08 22:52:13 -05:00
README.md [bsp/nuvoton] Support NuMaker-M467HJ BSP and update drivers. (#6416) 2022-09-12 07:36:11 -04:00
SConscript [bsp/nuvoton] Support NuMaker-M467HJ BSP and update drivers. (#6416) 2022-09-12 07:36:11 -04:00
SConstruct [bsp/nuvoton] Support NuMaker-M467HJ BSP and update drivers. (#6416) 2022-09-12 07:36:11 -04:00
config_lvgl modify RT_ALIGN_SIZE as 8 by default 2023-01-12 22:47:23 -05:00
rtconfig.py [bsp/nuvoton] Support NuMaker-M467HJ BSP and update drivers. (#6416) 2022-09-12 07:36:11 -04:00
template.ewd [bsp/nuvoton] Support NuMaker-M467HJ BSP and update drivers. (#6416) 2022-09-12 07:36:11 -04:00
template.ewp [bsp/nuvoton] Support NuMaker-M467HJ BSP and update drivers. (#6416) 2022-09-12 07:36:11 -04:00
template.eww [bsp/nuvoton] Support NuMaker-M467HJ BSP and update drivers. (#6416) 2022-09-12 07:36:11 -04:00
template.uvprojx [bsp/nuvoton] Support NuMaker-M467HJ BSP and update drivers. (#6416) 2022-09-12 07:36:11 -04:00

README.md

NuMaker-M467HJ

1. Introduction

The NuMaker-M467HJ is an evaluation board for Nuvoton NuMicro M467HJ microcontrollers. The NuMaker-M467HJ consists of two parts: an M467HJ target board and an on-board Nu-Link2-Me debugger and programmer. The NuMaker-M467HJ is designed for project evaluation, prototype development and validation with power consumption monitoring function.

The M467HJ target board is based on NuMicro M467HJHAN. For the development flexibility, the M467HJ target board provides the extension connectors, the Arduino UNO compatible headers and the capability of adopting multiple power supplies. Furthermore, the Nuvoton-designed ammeter connector can measure the power consumption instantly, which is essential for the prototype evaluation.

In addition, there is an attached on-board debugger and programmer “Nu-Link2-Me”. The Nu-Link2-Me supports on-chip debugging, online and offline ICP programming via SWD interface. The Nu-Link2-Me supports virtual COM (VCOM) port for printing debug messages on PC. Besides, the programming status could be shown on the built-in LEDs. Lastly, the Nu-Link2-Me could be detached from the evaluation board and become a stand-alone mass production programmer.

NuMaker-M467HJ

1.1 MCU specification

Features
MCU M467HJHAN
Operation frequency 192 MHz
embedded Flash size 1 MB, Dual Bank
SRAM size 512 kB
Crypto engine TRNG, PRNG, AES, SHA/HMAC, RSA, and ECC crypto accelerator
RMII interface Support 10/100 Mbps Ethernet

1.2 Interface

Interface
Arduino UNO compatible extension connector
RJ45 Ethernet port
USB 1.1/2.0 OTG ports
A microSD slot
A 3.5mm Audio connector
A CAN FD communication port
Debug through SWD interface
A LCD panel EBI interface
A Camera Capture interface

1.3 On-board devices

Device Description Driver supporting status
SPI flash 32Mb, W25Q32 Supported
HyperRAM 64Mb, W956A8MBYA5I Supported
Ethernet PHY RTL8201F Supported
Audio Codec NAU88L22 Supported
Thermal Sensor NCT7717U Supported

1.4 Board extended module

Device Description Driver supporting status
LCD Panel SSD1963(over ebi0) Supported
LCD Panel LCD FSA506(over ebi0) Supported
Touch screen controller TPC ILI2130(over i2c1) Supported
Touch screen controller TPC ST1663I(over i2c1) Supported
CCAP sensor module(over i2c0/PG11/PD12) HM1055, ADV7280 Supported

2. Supported compiler

Support GCC, MDK5, IAR IDE/compilers. More information of these compiler version as following:

IDE/Compiler Tested version
MDK5 5.26.2
IAR 8.2
GCC GCC 5.4.1 20160919 (release)

Notice: Please install Nu-Link_Keil_Driver or Nu-Link_IAR_Driver for development.

3. Program firmware

Step 1

At first, you need to configure switch on the NuMaker-M467HJ board. Set the No.1/2 switches to ON position. After the configuration is done, connect the NuMaker-M467HJ board and your computer using the USB Micro cable. After that, window manager will show a NuMicro MCU virtual disk. Finally, you will use this virtual disk to burn firmware.

NuLinkMe2_SwitchSetting

NuMicro MCU

Step 2

A simple firmware burning method is that you can drag and drop the binary image file to NuMicro MCU virtual disk or copy the binary file to NuMicro MCU disk to burn firmware.

Sendto

4. Test

You can use Tera Term terminate emulator (or other software) to type commands of RTT. All parameters of serial communication are shown in below image. Here, you can find out the corresponding port number of Nuvoton Virtual Com Port in window device manager.

Serial settings

5. Purchase

6. Resources