2686 lines
129 KiB
C
2686 lines
129 KiB
C
//*****************************************************************************
|
|
//
|
|
// hw_sysctl.h - Macros used when accessing the system control hardware.
|
|
//
|
|
// Copyright (c) 2005-2017 Texas Instruments Incorporated. All rights reserved.
|
|
// Software License Agreement
|
|
//
|
|
// Redistribution and use in source and binary forms, with or without
|
|
// modification, are permitted provided that the following conditions
|
|
// are met:
|
|
//
|
|
// Redistributions of source code must retain the above copyright
|
|
// notice, this list of conditions and the following disclaimer.
|
|
//
|
|
// Redistributions in binary form must reproduce the above copyright
|
|
// notice, this list of conditions and the following disclaimer in the
|
|
// documentation and/or other materials provided with the
|
|
// distribution.
|
|
//
|
|
// Neither the name of Texas Instruments Incorporated nor the names of
|
|
// its contributors may be used to endorse or promote products derived
|
|
// from this software without specific prior written permission.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
//
|
|
//*****************************************************************************
|
|
|
|
#ifndef __HW_SYSCTL_H__
|
|
#define __HW_SYSCTL_H__
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the System Control register addresses.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DID0 0x400FE000 // Device Identification 0
|
|
#define SYSCTL_DID1 0x400FE004 // Device Identification 1
|
|
#define SYSCTL_PTBOCTL 0x400FE038 // Power-Temp Brown Out Control
|
|
#define SYSCTL_RIS 0x400FE050 // Raw Interrupt Status
|
|
#define SYSCTL_IMC 0x400FE054 // Interrupt Mask Control
|
|
#define SYSCTL_MISC 0x400FE058 // Masked Interrupt Status and
|
|
// Clear
|
|
#define SYSCTL_RESC 0x400FE05C // Reset Cause
|
|
#define SYSCTL_PWRTC 0x400FE060 // Power-Temperature Cause
|
|
#define SYSCTL_NMIC 0x400FE064 // NMI Cause Register
|
|
#define SYSCTL_MOSCCTL 0x400FE07C // Main Oscillator Control
|
|
#define SYSCTL_RSCLKCFG 0x400FE0B0 // Run and Sleep Mode Configuration
|
|
// Register
|
|
#define SYSCTL_MEMTIM0 0x400FE0C0 // Memory Timing Parameter Register
|
|
// 0 for Main Flash and EEPROM
|
|
#define SYSCTL_ALTCLKCFG 0x400FE138 // Alternate Clock Configuration
|
|
#define SYSCTL_DSLPCLKCFG 0x400FE144 // Deep Sleep Clock Configuration
|
|
#define SYSCTL_DSCLKCFG 0x400FE144 // Deep Sleep Clock Configuration
|
|
// Register
|
|
#define SYSCTL_DIVSCLK 0x400FE148 // Divisor and Source Clock
|
|
// Configuration
|
|
#define SYSCTL_SYSPROP 0x400FE14C // System Properties
|
|
#define SYSCTL_PIOSCCAL 0x400FE150 // Precision Internal Oscillator
|
|
// Calibration
|
|
#define SYSCTL_PIOSCSTAT 0x400FE154 // Precision Internal Oscillator
|
|
// Statistics
|
|
#define SYSCTL_PLLFREQ0 0x400FE160 // PLL Frequency 0
|
|
#define SYSCTL_PLLFREQ1 0x400FE164 // PLL Frequency 1
|
|
#define SYSCTL_PLLSTAT 0x400FE168 // PLL Status
|
|
#define SYSCTL_SLPPWRCFG 0x400FE188 // Sleep Power Configuration
|
|
#define SYSCTL_DSLPPWRCFG 0x400FE18C // Deep-Sleep Power Configuration
|
|
#define SYSCTL_DC9 0x400FE190 // Device Capabilities 9
|
|
#define SYSCTL_NVMSTAT 0x400FE1A0 // Non-Volatile Memory Information
|
|
#define SYSCTL_LDOSPCTL 0x400FE1B4 // LDO Sleep Power Control
|
|
#define SYSCTL_LDODPCTL 0x400FE1BC // LDO Deep-Sleep Power Control
|
|
#define SYSCTL_RESBEHAVCTL 0x400FE1D8 // Reset Behavior Control Register
|
|
#define SYSCTL_HSSR 0x400FE1F4 // Hardware System Service Request
|
|
#define SYSCTL_USBPDS 0x400FE280 // USB Power Domain Status
|
|
#define SYSCTL_USBMPC 0x400FE284 // USB Memory Power Control
|
|
#define SYSCTL_EMACPDS 0x400FE288 // Ethernet MAC Power Domain Status
|
|
#define SYSCTL_EMACMPC 0x400FE28C // Ethernet MAC Memory Power
|
|
// Control
|
|
#define SYSCTL_LCDMPC 0x400FE294 // LCD Memory Power Control
|
|
#define SYSCTL_PPWD 0x400FE300 // Watchdog Timer Peripheral
|
|
// Present
|
|
#define SYSCTL_PPTIMER 0x400FE304 // 16/32-Bit General-Purpose Timer
|
|
// Peripheral Present
|
|
#define SYSCTL_PPGPIO 0x400FE308 // General-Purpose Input/Output
|
|
// Peripheral Present
|
|
#define SYSCTL_PPDMA 0x400FE30C // Micro Direct Memory Access
|
|
// Peripheral Present
|
|
#define SYSCTL_PPEPI 0x400FE310 // EPI Peripheral Present
|
|
#define SYSCTL_PPHIB 0x400FE314 // Hibernation Peripheral Present
|
|
#define SYSCTL_PPUART 0x400FE318 // Universal Asynchronous
|
|
// Receiver/Transmitter Peripheral
|
|
// Present
|
|
#define SYSCTL_PPSSI 0x400FE31C // Synchronous Serial Interface
|
|
// Peripheral Present
|
|
#define SYSCTL_PPI2C 0x400FE320 // Inter-Integrated Circuit
|
|
// Peripheral Present
|
|
#define SYSCTL_PPUSB 0x400FE328 // Universal Serial Bus Peripheral
|
|
// Present
|
|
#define SYSCTL_PPEPHY 0x400FE330 // Ethernet PHY Peripheral Present
|
|
#define SYSCTL_PPCAN 0x400FE334 // Controller Area Network
|
|
// Peripheral Present
|
|
#define SYSCTL_PPADC 0x400FE338 // Analog-to-Digital Converter
|
|
// Peripheral Present
|
|
#define SYSCTL_PPACMP 0x400FE33C // Analog Comparator Peripheral
|
|
// Present
|
|
#define SYSCTL_PPPWM 0x400FE340 // Pulse Width Modulator Peripheral
|
|
// Present
|
|
#define SYSCTL_PPQEI 0x400FE344 // Quadrature Encoder Interface
|
|
// Peripheral Present
|
|
#define SYSCTL_PPEEPROM 0x400FE358 // EEPROM Peripheral Present
|
|
#define SYSCTL_PPCCM 0x400FE374 // CRC and Cryptographic Modules
|
|
// Peripheral Present
|
|
#define SYSCTL_PPLCD 0x400FE390 // LCD Peripheral Present
|
|
#define SYSCTL_PPOWIRE 0x400FE398 // 1-Wire Peripheral Present
|
|
#define SYSCTL_PPEMAC 0x400FE39C // Ethernet MAC Peripheral Present
|
|
#define SYSCTL_SRWD 0x400FE500 // Watchdog Timer Software Reset
|
|
#define SYSCTL_SRTIMER 0x400FE504 // 16/32-Bit General-Purpose Timer
|
|
// Software Reset
|
|
#define SYSCTL_SRGPIO 0x400FE508 // General-Purpose Input/Output
|
|
// Software Reset
|
|
#define SYSCTL_SRDMA 0x400FE50C // Micro Direct Memory Access
|
|
// Software Reset
|
|
#define SYSCTL_SREPI 0x400FE510 // EPI Software Reset
|
|
#define SYSCTL_SRHIB 0x400FE514 // Hibernation Software Reset
|
|
#define SYSCTL_SRUART 0x400FE518 // Universal Asynchronous
|
|
// Receiver/Transmitter Software
|
|
// Reset
|
|
#define SYSCTL_SRSSI 0x400FE51C // Synchronous Serial Interface
|
|
// Software Reset
|
|
#define SYSCTL_SRI2C 0x400FE520 // Inter-Integrated Circuit
|
|
// Software Reset
|
|
#define SYSCTL_SRUSB 0x400FE528 // Universal Serial Bus Software
|
|
// Reset
|
|
#define SYSCTL_SREPHY 0x400FE530 // Ethernet PHY Software Reset
|
|
#define SYSCTL_SRCAN 0x400FE534 // Controller Area Network Software
|
|
// Reset
|
|
#define SYSCTL_SRADC 0x400FE538 // Analog-to-Digital Converter
|
|
// Software Reset
|
|
#define SYSCTL_SRACMP 0x400FE53C // Analog Comparator Software Reset
|
|
#define SYSCTL_SRPWM 0x400FE540 // Pulse Width Modulator Software
|
|
// Reset
|
|
#define SYSCTL_SRQEI 0x400FE544 // Quadrature Encoder Interface
|
|
// Software Reset
|
|
#define SYSCTL_SREEPROM 0x400FE558 // EEPROM Software Reset
|
|
#define SYSCTL_SRCCM 0x400FE574 // CRC and Cryptographic Modules
|
|
// Software Reset
|
|
#define SYSCTL_SRLCD 0x400FE590 // LCD Controller Software Reset
|
|
#define SYSCTL_SROWIRE 0x400FE598 // 1-Wire Software Reset
|
|
#define SYSCTL_SREMAC 0x400FE59C // Ethernet MAC Software Reset
|
|
#define SYSCTL_RCGCWD 0x400FE600 // Watchdog Timer Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCTIMER 0x400FE604 // 16/32-Bit General-Purpose Timer
|
|
// Run Mode Clock Gating Control
|
|
#define SYSCTL_RCGCGPIO 0x400FE608 // General-Purpose Input/Output Run
|
|
// Mode Clock Gating Control
|
|
#define SYSCTL_RCGCDMA 0x400FE60C // Micro Direct Memory Access Run
|
|
// Mode Clock Gating Control
|
|
#define SYSCTL_RCGCEPI 0x400FE610 // EPI Run Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_RCGCHIB 0x400FE614 // Hibernation Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCUART 0x400FE618 // Universal Asynchronous
|
|
// Receiver/Transmitter Run Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_RCGCSSI 0x400FE61C // Synchronous Serial Interface Run
|
|
// Mode Clock Gating Control
|
|
#define SYSCTL_RCGCI2C 0x400FE620 // Inter-Integrated Circuit Run
|
|
// Mode Clock Gating Control
|
|
#define SYSCTL_RCGCUSB 0x400FE628 // Universal Serial Bus Run Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_RCGCEPHY 0x400FE630 // Ethernet PHY Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCCAN 0x400FE634 // Controller Area Network Run Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_RCGCADC 0x400FE638 // Analog-to-Digital Converter Run
|
|
// Mode Clock Gating Control
|
|
#define SYSCTL_RCGCACMP 0x400FE63C // Analog Comparator Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCPWM 0x400FE640 // Pulse Width Modulator Run Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_RCGCQEI 0x400FE644 // Quadrature Encoder Interface Run
|
|
// Mode Clock Gating Control
|
|
#define SYSCTL_RCGCEEPROM 0x400FE658 // EEPROM Run Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_RCGCCCM 0x400FE674 // CRC and Cryptographic Modules
|
|
// Run Mode Clock Gating Control
|
|
#define SYSCTL_RCGCLCD 0x400FE690 // LCD Controller Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCOWIRE 0x400FE698 // 1-Wire Run Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_RCGCEMAC 0x400FE69C // Ethernet MAC Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCWD 0x400FE700 // Watchdog Timer Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCTIMER 0x400FE704 // 16/32-Bit General-Purpose Timer
|
|
// Sleep Mode Clock Gating Control
|
|
#define SYSCTL_SCGCGPIO 0x400FE708 // General-Purpose Input/Output
|
|
// Sleep Mode Clock Gating Control
|
|
#define SYSCTL_SCGCDMA 0x400FE70C // Micro Direct Memory Access Sleep
|
|
// Mode Clock Gating Control
|
|
#define SYSCTL_SCGCEPI 0x400FE710 // EPI Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_SCGCHIB 0x400FE714 // Hibernation Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCUART 0x400FE718 // Universal Asynchronous
|
|
// Receiver/Transmitter Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_SCGCSSI 0x400FE71C // Synchronous Serial Interface
|
|
// Sleep Mode Clock Gating Control
|
|
#define SYSCTL_SCGCI2C 0x400FE720 // Inter-Integrated Circuit Sleep
|
|
// Mode Clock Gating Control
|
|
#define SYSCTL_SCGCUSB 0x400FE728 // Universal Serial Bus Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_SCGCEPHY 0x400FE730 // Ethernet PHY Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCCAN 0x400FE734 // Controller Area Network Sleep
|
|
// Mode Clock Gating Control
|
|
#define SYSCTL_SCGCADC 0x400FE738 // Analog-to-Digital Converter
|
|
// Sleep Mode Clock Gating Control
|
|
#define SYSCTL_SCGCACMP 0x400FE73C // Analog Comparator Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_SCGCPWM 0x400FE740 // Pulse Width Modulator Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_SCGCQEI 0x400FE744 // Quadrature Encoder Interface
|
|
// Sleep Mode Clock Gating Control
|
|
#define SYSCTL_SCGCEEPROM 0x400FE758 // EEPROM Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_SCGCCCM 0x400FE774 // CRC and Cryptographic Modules
|
|
// Sleep Mode Clock Gating Control
|
|
#define SYSCTL_SCGCLCD 0x400FE790 // LCD Controller Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCOWIRE 0x400FE798 // 1-Wire Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_SCGCEMAC 0x400FE79C // Ethernet MAC Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_DCGCWD 0x400FE800 // Watchdog Timer Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCTIMER 0x400FE804 // 16/32-Bit General-Purpose Timer
|
|
// Deep-Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_DCGCGPIO 0x400FE808 // General-Purpose Input/Output
|
|
// Deep-Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_DCGCDMA 0x400FE80C // Micro Direct Memory Access
|
|
// Deep-Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_DCGCEPI 0x400FE810 // EPI Deep-Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_DCGCHIB 0x400FE814 // Hibernation Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCUART 0x400FE818 // Universal Asynchronous
|
|
// Receiver/Transmitter Deep-Sleep
|
|
// Mode Clock Gating Control
|
|
#define SYSCTL_DCGCSSI 0x400FE81C // Synchronous Serial Interface
|
|
// Deep-Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_DCGCI2C 0x400FE820 // Inter-Integrated Circuit
|
|
// Deep-Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_DCGCUSB 0x400FE828 // Universal Serial Bus Deep-Sleep
|
|
// Mode Clock Gating Control
|
|
#define SYSCTL_DCGCEPHY 0x400FE830 // Ethernet PHY Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCCAN 0x400FE834 // Controller Area Network
|
|
// Deep-Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_DCGCADC 0x400FE838 // Analog-to-Digital Converter
|
|
// Deep-Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_DCGCACMP 0x400FE83C // Analog Comparator Deep-Sleep
|
|
// Mode Clock Gating Control
|
|
#define SYSCTL_DCGCPWM 0x400FE840 // Pulse Width Modulator Deep-Sleep
|
|
// Mode Clock Gating Control
|
|
#define SYSCTL_DCGCQEI 0x400FE844 // Quadrature Encoder Interface
|
|
// Deep-Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_DCGCEEPROM 0x400FE858 // EEPROM Deep-Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_DCGCCCM 0x400FE874 // CRC and Cryptographic Modules
|
|
// Deep-Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_DCGCLCD 0x400FE890 // LCD Controller Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCOWIRE 0x400FE898 // 1-Wire Deep-Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_DCGCEMAC 0x400FE89C // Ethernet MAC Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_PCWD 0x400FE900 // Watchdog Timer Power Control
|
|
#define SYSCTL_PCTIMER 0x400FE904 // 16/32-Bit General-Purpose Timer
|
|
// Power Control
|
|
#define SYSCTL_PCGPIO 0x400FE908 // General-Purpose Input/Output
|
|
// Power Control
|
|
#define SYSCTL_PCDMA 0x400FE90C // Micro Direct Memory Access Power
|
|
// Control
|
|
#define SYSCTL_PCEPI 0x400FE910 // External Peripheral Interface
|
|
// Power Control
|
|
#define SYSCTL_PCHIB 0x400FE914 // Hibernation Power Control
|
|
#define SYSCTL_PCUART 0x400FE918 // Universal Asynchronous
|
|
// Receiver/Transmitter Power
|
|
// Control
|
|
#define SYSCTL_PCSSI 0x400FE91C // Synchronous Serial Interface
|
|
// Power Control
|
|
#define SYSCTL_PCI2C 0x400FE920 // Inter-Integrated Circuit Power
|
|
// Control
|
|
#define SYSCTL_PCUSB 0x400FE928 // Universal Serial Bus Power
|
|
// Control
|
|
#define SYSCTL_PCEPHY 0x400FE930 // Ethernet PHY Power Control
|
|
#define SYSCTL_PCCAN 0x400FE934 // Controller Area Network Power
|
|
// Control
|
|
#define SYSCTL_PCADC 0x400FE938 // Analog-to-Digital Converter
|
|
// Power Control
|
|
#define SYSCTL_PCACMP 0x400FE93C // Analog Comparator Power Control
|
|
#define SYSCTL_PCPWM 0x400FE940 // Pulse Width Modulator Power
|
|
// Control
|
|
#define SYSCTL_PCQEI 0x400FE944 // Quadrature Encoder Interface
|
|
// Power Control
|
|
#define SYSCTL_PCEEPROM 0x400FE958 // EEPROM Power Control
|
|
#define SYSCTL_PCCCM 0x400FE974 // CRC and Cryptographic Modules
|
|
// Power Control
|
|
#define SYSCTL_PCLCD 0x400FE990 // LCD Controller Power Control
|
|
#define SYSCTL_PCOWIRE 0x400FE998 // 1-Wire Power Control
|
|
#define SYSCTL_PCEMAC 0x400FE99C // Ethernet MAC Power Control
|
|
#define SYSCTL_PRWD 0x400FEA00 // Watchdog Timer Peripheral Ready
|
|
#define SYSCTL_PRTIMER 0x400FEA04 // 16/32-Bit General-Purpose Timer
|
|
// Peripheral Ready
|
|
#define SYSCTL_PRGPIO 0x400FEA08 // General-Purpose Input/Output
|
|
// Peripheral Ready
|
|
#define SYSCTL_PRDMA 0x400FEA0C // Micro Direct Memory Access
|
|
// Peripheral Ready
|
|
#define SYSCTL_PREPI 0x400FEA10 // EPI Peripheral Ready
|
|
#define SYSCTL_PRHIB 0x400FEA14 // Hibernation Peripheral Ready
|
|
#define SYSCTL_PRUART 0x400FEA18 // Universal Asynchronous
|
|
// Receiver/Transmitter Peripheral
|
|
// Ready
|
|
#define SYSCTL_PRSSI 0x400FEA1C // Synchronous Serial Interface
|
|
// Peripheral Ready
|
|
#define SYSCTL_PRI2C 0x400FEA20 // Inter-Integrated Circuit
|
|
// Peripheral Ready
|
|
#define SYSCTL_PRUSB 0x400FEA28 // Universal Serial Bus Peripheral
|
|
// Ready
|
|
#define SYSCTL_PREPHY 0x400FEA30 // Ethernet PHY Peripheral Ready
|
|
#define SYSCTL_PRCAN 0x400FEA34 // Controller Area Network
|
|
// Peripheral Ready
|
|
#define SYSCTL_PRADC 0x400FEA38 // Analog-to-Digital Converter
|
|
// Peripheral Ready
|
|
#define SYSCTL_PRACMP 0x400FEA3C // Analog Comparator Peripheral
|
|
// Ready
|
|
#define SYSCTL_PRPWM 0x400FEA40 // Pulse Width Modulator Peripheral
|
|
// Ready
|
|
#define SYSCTL_PRQEI 0x400FEA44 // Quadrature Encoder Interface
|
|
// Peripheral Ready
|
|
#define SYSCTL_PREEPROM 0x400FEA58 // EEPROM Peripheral Ready
|
|
#define SYSCTL_PRCCM 0x400FEA74 // CRC and Cryptographic Modules
|
|
// Peripheral Ready
|
|
#define SYSCTL_PRLCD 0x400FEA90 // LCD Controller Peripheral Ready
|
|
#define SYSCTL_PROWIRE 0x400FEA98 // 1-Wire Peripheral Ready
|
|
#define SYSCTL_PREMAC 0x400FEA9C // Ethernet MAC Peripheral Ready
|
|
#define SYSCTL_UNIQUEID0 0x400FEF20 // Unique ID 0
|
|
#define SYSCTL_UNIQUEID1 0x400FEF24 // Unique ID 1
|
|
#define SYSCTL_UNIQUEID2 0x400FEF28 // Unique ID 2
|
|
#define SYSCTL_UNIQUEID3 0x400FEF2C // Unique ID 3
|
|
// #define SYSCTL_CCMCGREQ 0x44030204 // Cryptographic Modules Clock
|
|
// // Gating Request
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DID0 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DID0_VER_M 0x70000000 // DID0 Version
|
|
#define SYSCTL_DID0_VER_1 0x10000000 // Second version of the DID0
|
|
// register format.
|
|
#define SYSCTL_DID0_CLASS_M 0x00FF0000 // Device Class
|
|
#define SYSCTL_DID0_CLASS_MSP432E4 \
|
|
0x000C0000 // MSP432E4 microcontrollers
|
|
#define SYSCTL_DID0_MAJ_M 0x0000FF00 // Major Revision
|
|
#define SYSCTL_DID0_MAJ_REVA 0x00000000 // Revision A (initial device)
|
|
#define SYSCTL_DID0_MAJ_REVB 0x00000100 // Revision B (first base layer
|
|
// revision)
|
|
#define SYSCTL_DID0_MAJ_REVC 0x00000200 // Revision C (second base layer
|
|
// revision)
|
|
#define SYSCTL_DID0_MIN_M 0x000000FF // Minor Revision
|
|
#define SYSCTL_DID0_MIN_0 0x00000000 // Initial device, or a major
|
|
// revision update
|
|
#define SYSCTL_DID0_MIN_1 0x00000001 // First metal layer change
|
|
#define SYSCTL_DID0_MIN_2 0x00000002 // Second metal layer change
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DID1 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DID1_VER_M 0xF0000000 // DID1 Version
|
|
#define SYSCTL_DID1_FAM_M 0x0F000000 // Family
|
|
#define SYSCTL_DID1_FAM_MSP432E4 \
|
|
0x00000000 // MSP432E4 family of
|
|
// microcontollers
|
|
#define SYSCTL_DID1_PRTNO_M 0x00FF0000 // Part Number
|
|
#define SYSCTL_DID1_PRTNO_MSP432E401Y \
|
|
0x002D0000 // MSP432E401Y
|
|
#define SYSCTL_DID1_PRTNO_MSP432E411Y \
|
|
0x00320000 // MSP432E411Y
|
|
#define SYSCTL_DID1_PINCNT_M 0x0000E000 // Package Pin Count
|
|
#define SYSCTL_DID1_PINCNT_128 0x0000C000 // 128-pin TQFP package
|
|
#define SYSCTL_DID1_PINCNT_212 0x0000E000 // 212-pin BGA package
|
|
#define SYSCTL_DID1_TEMP_M 0x000000E0 // Temperature Range
|
|
#define SYSCTL_DID1_TEMP_C 0x00000000 // Commercial temperature range
|
|
#define SYSCTL_DID1_TEMP_I 0x00000020 // Industrial temperature range
|
|
#define SYSCTL_DID1_TEMP_E 0x00000040 // Extended temperature range
|
|
#define SYSCTL_DID1_TEMP_IE 0x00000060 // Available in both industrial
|
|
// temperature range (-40C to 85C)
|
|
// and extended temperature range
|
|
// (-40C to 105C) devices. See
|
|
#define SYSCTL_DID1_PKG_M 0x00000018 // Package Type
|
|
#define SYSCTL_DID1_PKG_QFP 0x00000008 // QFP package
|
|
#define SYSCTL_DID1_PKG_BGA 0x00000010 // BGA package
|
|
#define SYSCTL_DID1_ROHS 0x00000004 // RoHS-Compliance
|
|
#define SYSCTL_DID1_QUAL_M 0x00000003 // Qualification Status
|
|
#define SYSCTL_DID1_QUAL_ES 0x00000000 // Engineering Sample (unqualified)
|
|
#define SYSCTL_DID1_QUAL_PP 0x00000001 // Pilot Production (unqualified)
|
|
#define SYSCTL_DID1_QUAL_FQ 0x00000002 // Fully Qualified
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PTBOCTL register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PTBOCTL_VDDA_UBOR_M \
|
|
0x00000300 // VDDA under BOR Event Action
|
|
#define SYSCTL_PTBOCTL_VDDA_UBOR_NONE \
|
|
0x00000000 // No Action
|
|
#define SYSCTL_PTBOCTL_VDDA_UBOR_SYSINT \
|
|
0x00000100 // System control interrupt
|
|
#define SYSCTL_PTBOCTL_VDDA_UBOR_NMI \
|
|
0x00000200 // NMI
|
|
#define SYSCTL_PTBOCTL_VDDA_UBOR_RST \
|
|
0x00000300 // Reset
|
|
#define SYSCTL_PTBOCTL_VDD_UBOR_M \
|
|
0x00000003 // VDD (VDDS) under BOR Event
|
|
// Action
|
|
#define SYSCTL_PTBOCTL_VDD_UBOR_NONE \
|
|
0x00000000 // No Action
|
|
#define SYSCTL_PTBOCTL_VDD_UBOR_SYSINT \
|
|
0x00000001 // System control interrupt
|
|
#define SYSCTL_PTBOCTL_VDD_UBOR_NMI \
|
|
0x00000002 // NMI
|
|
#define SYSCTL_PTBOCTL_VDD_UBOR_RST \
|
|
0x00000003 // Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RIS register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RIS_MOSCPUPRIS 0x00000100 // MOSC Power Up Raw Interrupt
|
|
// Status
|
|
#define SYSCTL_RIS_PLLLRIS 0x00000040 // PLL Lock Raw Interrupt Status
|
|
#define SYSCTL_RIS_MOFRIS 0x00000008 // Main Oscillator Failure Raw
|
|
// Interrupt Status
|
|
#define SYSCTL_RIS_BORRIS 0x00000002 // Brown-Out Reset Raw Interrupt
|
|
// Status
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_IMC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_IMC_MOSCPUPIM 0x00000100 // MOSC Power Up Interrupt Mask
|
|
#define SYSCTL_IMC_PLLLIM 0x00000040 // PLL Lock Interrupt Mask
|
|
#define SYSCTL_IMC_MOFIM 0x00000008 // Main Oscillator Failure
|
|
// Interrupt Mask
|
|
#define SYSCTL_IMC_BORIM 0x00000002 // Brown-Out Reset Interrupt Mask
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_MISC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_MISC_MOSCPUPMIS 0x00000100 // MOSC Power Up Masked Interrupt
|
|
// Status
|
|
#define SYSCTL_MISC_PLLLMIS 0x00000040 // PLL Lock Masked Interrupt Status
|
|
#define SYSCTL_MISC_MOFMIS 0x00000008 // Main Oscillator Failure Masked
|
|
// Interrupt Status
|
|
#define SYSCTL_MISC_BORMIS 0x00000002 // BOR Masked Interrupt Status
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RESC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RESC_MOSCFAIL 0x00010000 // MOSC Failure Reset
|
|
#define SYSCTL_RESC_HSSR 0x00001000 // HSSR Reset
|
|
#define SYSCTL_RESC_WDT1 0x00000020 // Watchdog Timer 1 Reset
|
|
#define SYSCTL_RESC_SW 0x00000010 // Software Reset
|
|
#define SYSCTL_RESC_WDT0 0x00000008 // Watchdog Timer 0 Reset
|
|
#define SYSCTL_RESC_BOR 0x00000004 // Brown-Out Reset
|
|
#define SYSCTL_RESC_POR 0x00000002 // Power-On Reset
|
|
#define SYSCTL_RESC_EXT 0x00000001 // External Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PWRTC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PWRTC_VDDA_UBOR 0x00000010 // VDDA Under BOR Status
|
|
#define SYSCTL_PWRTC_VDD_UBOR 0x00000001 // VDD Under BOR Status
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_NMIC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_NMIC_MOSCFAIL 0x00010000 // MOSC Failure NMI
|
|
#define SYSCTL_NMIC_TAMPER 0x00000200 // Tamper Event NMI
|
|
#define SYSCTL_NMIC_WDT1 0x00000020 // Watch Dog Timer (WDT) 1 NMI
|
|
#define SYSCTL_NMIC_WDT0 0x00000008 // Watch Dog Timer (WDT) 0 NMI
|
|
#define SYSCTL_NMIC_POWER 0x00000004 // Power/Brown Out Event NMI
|
|
#define SYSCTL_NMIC_EXTERNAL 0x00000001 // External Pin NMI
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_MOSCCTL register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_MOSCCTL_OSCRNG 0x00000010 // Oscillator Range
|
|
#define SYSCTL_MOSCCTL_PWRDN 0x00000008 // Power Down
|
|
#define SYSCTL_MOSCCTL_NOXTAL 0x00000004 // No Crystal Connected
|
|
#define SYSCTL_MOSCCTL_MOSCIM 0x00000002 // MOSC Failure Action
|
|
#define SYSCTL_MOSCCTL_CVAL 0x00000001 // Clock Validation for MOSC
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RSCLKCFG
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RSCLKCFG_MEMTIMU 0x80000000 // Memory Timing Register Update
|
|
#define SYSCTL_RSCLKCFG_NEWFREQ 0x40000000 // New PLLFREQ Accept
|
|
#define SYSCTL_RSCLKCFG_ACG 0x20000000 // Auto Clock Gating
|
|
#define SYSCTL_RSCLKCFG_USEPLL 0x10000000 // Use PLL
|
|
#define SYSCTL_RSCLKCFG_PLLSRC_M \
|
|
0x0F000000 // PLL Source
|
|
#define SYSCTL_RSCLKCFG_PLLSRC_PIOSC \
|
|
0x00000000 // PIOSC is PLL input clock source
|
|
#define SYSCTL_RSCLKCFG_PLLSRC_MOSC \
|
|
0x03000000 // MOSC is the PLL input clock
|
|
// source
|
|
#define SYSCTL_RSCLKCFG_OSCSRC_M \
|
|
0x00F00000 // Oscillator Source
|
|
#define SYSCTL_RSCLKCFG_OSCSRC_PIOSC \
|
|
0x00000000 // PIOSC is oscillator source
|
|
#define SYSCTL_RSCLKCFG_OSCSRC_LFIOSC \
|
|
0x00200000 // LFIOSC is oscillator source
|
|
#define SYSCTL_RSCLKCFG_OSCSRC_MOSC \
|
|
0x00300000 // MOSC is oscillator source
|
|
#define SYSCTL_RSCLKCFG_OSCSRC_RTC \
|
|
0x00400000 // Hibernation Module RTC
|
|
// Oscillator (RTCOSC)
|
|
#define SYSCTL_RSCLKCFG_OSYSDIV_M \
|
|
0x000FFC00 // Oscillator System Clock Divisor
|
|
#define SYSCTL_RSCLKCFG_PSYSDIV_M \
|
|
0x000003FF // PLL System Clock Divisor
|
|
#define SYSCTL_RSCLKCFG_OSYSDIV_S \
|
|
10
|
|
#define SYSCTL_RSCLKCFG_PSYSDIV_S \
|
|
0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_MEMTIM0 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_MEMTIM0_EBCHT_M 0x03C00000 // EEPROM Clock High Time
|
|
#define SYSCTL_MEMTIM0_EBCHT_0_5 \
|
|
0x00000000 // 1/2 system clock period
|
|
#define SYSCTL_MEMTIM0_EBCHT_1 0x00400000 // 1 system clock period
|
|
#define SYSCTL_MEMTIM0_EBCHT_1_5 \
|
|
0x00800000 // 1.5 system clock periods
|
|
#define SYSCTL_MEMTIM0_EBCHT_2 0x00C00000 // 2 system clock periods
|
|
#define SYSCTL_MEMTIM0_EBCHT_2_5 \
|
|
0x01000000 // 2.5 system clock periods
|
|
#define SYSCTL_MEMTIM0_EBCHT_3 0x01400000 // 3 system clock periods
|
|
#define SYSCTL_MEMTIM0_EBCHT_3_5 \
|
|
0x01800000 // 3.5 system clock periods
|
|
#define SYSCTL_MEMTIM0_EBCHT_4 0x01C00000 // 4 system clock periods
|
|
#define SYSCTL_MEMTIM0_EBCHT_4_5 \
|
|
0x02000000 // 4.5 system clock periods
|
|
#define SYSCTL_MEMTIM0_EBCE 0x00200000 // EEPROM Bank Clock Edge
|
|
#define SYSCTL_MEMTIM0_MB1 0x00100010 // Must be one
|
|
#define SYSCTL_MEMTIM0_EWS_M 0x000F0000 // EEPROM Wait States
|
|
#define SYSCTL_MEMTIM0_FBCHT_M 0x000003C0 // Flash Bank Clock High Time
|
|
#define SYSCTL_MEMTIM0_FBCHT_0_5 \
|
|
0x00000000 // 1/2 system clock period
|
|
#define SYSCTL_MEMTIM0_FBCHT_1 0x00000040 // 1 system clock period
|
|
#define SYSCTL_MEMTIM0_FBCHT_1_5 \
|
|
0x00000080 // 1.5 system clock periods
|
|
#define SYSCTL_MEMTIM0_FBCHT_2 0x000000C0 // 2 system clock periods
|
|
#define SYSCTL_MEMTIM0_FBCHT_2_5 \
|
|
0x00000100 // 2.5 system clock periods
|
|
#define SYSCTL_MEMTIM0_FBCHT_3 0x00000140 // 3 system clock periods
|
|
#define SYSCTL_MEMTIM0_FBCHT_3_5 \
|
|
0x00000180 // 3.5 system clock periods
|
|
#define SYSCTL_MEMTIM0_FBCHT_4 0x000001C0 // 4 system clock periods
|
|
#define SYSCTL_MEMTIM0_FBCHT_4_5 \
|
|
0x00000200 // 4.5 system clock periods
|
|
#define SYSCTL_MEMTIM0_FBCE 0x00000020 // Flash Bank Clock Edge
|
|
#define SYSCTL_MEMTIM0_FWS_M 0x0000000F // Flash Wait State
|
|
#define SYSCTL_MEMTIM0_EWS_S 16
|
|
#define SYSCTL_MEMTIM0_FWS_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_ALTCLKCFG
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_ALTCLKCFG_ALTCLK_M \
|
|
0x0000000F // Alternate Clock Source
|
|
#define SYSCTL_ALTCLKCFG_ALTCLK_PIOSC \
|
|
0x00000000 // PIOSC
|
|
#define SYSCTL_ALTCLKCFG_ALTCLK_RTCOSC \
|
|
0x00000003 // Hibernation Module Real-time
|
|
// clock output (RTCOSC)
|
|
#define SYSCTL_ALTCLKCFG_ALTCLK_LFIOSC \
|
|
0x00000004 // Low-frequency internal
|
|
// oscillator (LFIOSC)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DSCLKCFG
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DSCLKCFG_PIOSCPD 0x80000000 // PIOSC Power Down
|
|
#define SYSCTL_DSCLKCFG_MOSCDPD 0x40000000 // MOSC Disable Power Down
|
|
#define SYSCTL_DSCLKCFG_DSOSCSRC_M \
|
|
0x00F00000 // Deep Sleep Oscillator Source
|
|
#define SYSCTL_DSCLKCFG_DSOSCSRC_PIOSC \
|
|
0x00000000 // PIOSC
|
|
#define SYSCTL_DSCLKCFG_DSOSCSRC_LFIOSC \
|
|
0x00200000 // LFIOSC
|
|
#define SYSCTL_DSCLKCFG_DSOSCSRC_MOSC \
|
|
0x00300000 // MOSC
|
|
#define SYSCTL_DSCLKCFG_DSOSCSRC_RTC \
|
|
0x00400000 // Hibernation Module RTCOSC
|
|
#define SYSCTL_DSCLKCFG_DSSYSDIV_M \
|
|
0x000003FF // Deep Sleep Clock Divisor
|
|
#define SYSCTL_DSCLKCFG_DSSYSDIV_S \
|
|
0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DIVSCLK register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DIVSCLK_EN 0x80000000 // DIVSCLK Enable
|
|
#define SYSCTL_DIVSCLK_SRC_M 0x00030000 // Clock Source
|
|
#define SYSCTL_DIVSCLK_SRC_SYSCLK \
|
|
0x00000000 // System Clock
|
|
#define SYSCTL_DIVSCLK_SRC_PIOSC \
|
|
0x00010000 // PIOSC
|
|
#define SYSCTL_DIVSCLK_SRC_MOSC 0x00020000 // MOSC
|
|
#define SYSCTL_DIVSCLK_DIV_M 0x000000FF // Divisor Value
|
|
#define SYSCTL_DIVSCLK_DIV_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SYSPROP register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SYSPROP_FPU 0x00000001 // FPU Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PIOSCCAL
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PIOSCCAL_UTEN 0x80000000 // Use User Trim Value
|
|
#define SYSCTL_PIOSCCAL_CAL 0x00000200 // Start Calibration
|
|
#define SYSCTL_PIOSCCAL_UPDATE 0x00000100 // Update Trim
|
|
#define SYSCTL_PIOSCCAL_UT_M 0x0000007F // User Trim Value
|
|
#define SYSCTL_PIOSCCAL_UT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PIOSCSTAT
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PIOSCSTAT_DT_M 0x007F0000 // Default Trim Value
|
|
#define SYSCTL_PIOSCSTAT_CR_M 0x00000300 // Calibration Result
|
|
#define SYSCTL_PIOSCSTAT_CRNONE 0x00000000 // Calibration has not been
|
|
// attempted
|
|
#define SYSCTL_PIOSCSTAT_CRPASS 0x00000100 // The last calibration operation
|
|
// completed to meet 1% accuracy
|
|
#define SYSCTL_PIOSCSTAT_CRFAIL 0x00000200 // The last calibration operation
|
|
// failed to meet 1% accuracy
|
|
#define SYSCTL_PIOSCSTAT_CT_M 0x0000007F // Calibration Trim Value
|
|
#define SYSCTL_PIOSCSTAT_DT_S 16
|
|
#define SYSCTL_PIOSCSTAT_CT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PLLFREQ0
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PLLFREQ0_PLLPWR 0x00800000 // PLL Power
|
|
#define SYSCTL_PLLFREQ0_MFRAC_M 0x000FFC00 // PLL M Fractional Value
|
|
#define SYSCTL_PLLFREQ0_MINT_M 0x000003FF // PLL M Integer Value
|
|
#define SYSCTL_PLLFREQ0_MFRAC_S 10
|
|
#define SYSCTL_PLLFREQ0_MINT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PLLFREQ1
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PLLFREQ1_Q_M 0x00001F00 // PLL Q Value
|
|
#define SYSCTL_PLLFREQ1_N_M 0x0000001F // PLL N Value
|
|
#define SYSCTL_PLLFREQ1_Q_S 8
|
|
#define SYSCTL_PLLFREQ1_N_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PLLSTAT register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PLLSTAT_LOCK 0x00000001 // PLL Lock
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SLPPWRCFG
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SLPPWRCFG_FLASHPM_M \
|
|
0x00000030 // Flash Power Modes
|
|
#define SYSCTL_SLPPWRCFG_FLASHPM_NRM \
|
|
0x00000000 // Active Mode
|
|
#define SYSCTL_SLPPWRCFG_FLASHPM_SLP \
|
|
0x00000020 // Low Power Mode
|
|
#define SYSCTL_SLPPWRCFG_SRAMPM_M \
|
|
0x00000003 // SRAM Power Modes
|
|
#define SYSCTL_SLPPWRCFG_SRAMPM_NRM \
|
|
0x00000000 // Active Mode
|
|
#define SYSCTL_SLPPWRCFG_SRAMPM_SBY \
|
|
0x00000001 // Standby Mode
|
|
#define SYSCTL_SLPPWRCFG_SRAMPM_LP \
|
|
0x00000003 // Low Power Mode
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DSLPPWRCFG
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DSLPPWRCFG_LDOSM 0x00000200 // LDO Sleep Mode
|
|
#define SYSCTL_DSLPPWRCFG_TSPD 0x00000100 // Temperature Sense Power Down
|
|
#define SYSCTL_DSLPPWRCFG_FLASHPM_M \
|
|
0x00000030 // Flash Power Modes
|
|
#define SYSCTL_DSLPPWRCFG_FLASHPM_NRM \
|
|
0x00000000 // Active Mode
|
|
#define SYSCTL_DSLPPWRCFG_FLASHPM_SLP \
|
|
0x00000020 // Low Power Mode
|
|
#define SYSCTL_DSLPPWRCFG_SRAMPM_M \
|
|
0x00000003 // SRAM Power Modes
|
|
#define SYSCTL_DSLPPWRCFG_SRAMPM_NRM \
|
|
0x00000000 // Active Mode
|
|
#define SYSCTL_DSLPPWRCFG_SRAMPM_SBY \
|
|
0x00000001 // Standby Mode
|
|
#define SYSCTL_DSLPPWRCFG_SRAMPM_LP \
|
|
0x00000003 // Low Power Mode
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_NVMSTAT register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_NVMSTAT_FWB 0x00000001 // 32 Word Flash Write Buffer
|
|
// Available
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_LDOSPCTL
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_LDOSPCTL_VADJEN 0x80000000 // Voltage Adjust Enable
|
|
#define SYSCTL_LDOSPCTL_VLDO_M 0x000000FF // LDO Output Voltage
|
|
#define SYSCTL_LDOSPCTL_VLDO_0_90V \
|
|
0x00000012 // 0.90 V
|
|
#define SYSCTL_LDOSPCTL_VLDO_0_95V \
|
|
0x00000013 // 0.95 V
|
|
#define SYSCTL_LDOSPCTL_VLDO_1_00V \
|
|
0x00000014 // 1.00 V
|
|
#define SYSCTL_LDOSPCTL_VLDO_1_05V \
|
|
0x00000015 // 1.05 V
|
|
#define SYSCTL_LDOSPCTL_VLDO_1_10V \
|
|
0x00000016 // 1.10 V
|
|
#define SYSCTL_LDOSPCTL_VLDO_1_15V \
|
|
0x00000017 // 1.15 V
|
|
#define SYSCTL_LDOSPCTL_VLDO_1_20V \
|
|
0x00000018 // 1.20 V
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_LDODPCTL
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_LDODPCTL_VADJEN 0x80000000 // Voltage Adjust Enable
|
|
#define SYSCTL_LDODPCTL_VLDO_M 0x000000FF // LDO Output Voltage
|
|
#define SYSCTL_LDODPCTL_VLDO_0_90V \
|
|
0x00000012 // 0.90 V
|
|
#define SYSCTL_LDODPCTL_VLDO_0_95V \
|
|
0x00000013 // 0.95 V
|
|
#define SYSCTL_LDODPCTL_VLDO_1_00V \
|
|
0x00000014 // 1.00 V
|
|
#define SYSCTL_LDODPCTL_VLDO_1_05V \
|
|
0x00000015 // 1.05 V
|
|
#define SYSCTL_LDODPCTL_VLDO_1_10V \
|
|
0x00000016 // 1.10 V
|
|
#define SYSCTL_LDODPCTL_VLDO_1_15V \
|
|
0x00000017 // 1.15 V
|
|
#define SYSCTL_LDODPCTL_VLDO_1_20V \
|
|
0x00000018 // 1.20 V
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RESBEHAVCTL
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RESBEHAVCTL_WDOG1_M \
|
|
0x000000C0 // Watchdog 1 Reset Operation
|
|
#define SYSCTL_RESBEHAVCTL_WDOG1_SYSRST \
|
|
0x00000080 // Watchdog 1 issues a system
|
|
// reset. The application starts
|
|
// within 10 us
|
|
#define SYSCTL_RESBEHAVCTL_WDOG1_POR \
|
|
0x000000C0 // Watchdog 1 issues a simulated
|
|
// POR sequence. Application starts
|
|
// less than 500 us after
|
|
// deassertion (Default)
|
|
#define SYSCTL_RESBEHAVCTL_WDOG0_M \
|
|
0x00000030 // Watchdog 0 Reset Operation
|
|
#define SYSCTL_RESBEHAVCTL_WDOG0_SYSRST \
|
|
0x00000020 // Watchdog 0 issues a system
|
|
// reset. The application starts
|
|
// within 10 us
|
|
#define SYSCTL_RESBEHAVCTL_WDOG0_POR \
|
|
0x00000030 // Watchdog 0 issues a simulated
|
|
// POR sequence. Application starts
|
|
// less than 500 us after
|
|
// deassertion (Default)
|
|
#define SYSCTL_RESBEHAVCTL_BOR_M \
|
|
0x0000000C // BOR Reset operation
|
|
#define SYSCTL_RESBEHAVCTL_BOR_SYSRST \
|
|
0x00000008 // Brown Out Reset issues system
|
|
// reset. The application starts
|
|
// within 10 us
|
|
#define SYSCTL_RESBEHAVCTL_BOR_POR \
|
|
0x0000000C // Brown Out Reset issues a
|
|
// simulated POR sequence. The
|
|
// application starts less than 500
|
|
// us after deassertion (Default)
|
|
#define SYSCTL_RESBEHAVCTL_EXTRES_M \
|
|
0x00000003 // External RST Pin Operation
|
|
#define SYSCTL_RESBEHAVCTL_EXTRES_SYSRST \
|
|
0x00000002 // External RST assertion issues a
|
|
// system reset. The application
|
|
// starts within 10 us
|
|
#define SYSCTL_RESBEHAVCTL_EXTRES_POR \
|
|
0x00000003 // External RST assertion issues a
|
|
// simulated POR sequence.
|
|
// Application starts less than 500
|
|
// us after deassertion (Default)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_HSSR register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_HSSR_KEY_M 0xFF000000 // Write Key
|
|
#define SYSCTL_HSSR_CDOFF_M 0x00FFFFFF // Command Descriptor Pointer
|
|
#define SYSCTL_HSSR_KEY_S 24
|
|
#define SYSCTL_HSSR_CDOFF_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_USBPDS register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_USBPDS_MEMSTAT_M 0x0000000C // Memory Array Power Status
|
|
#define SYSCTL_USBPDS_MEMSTAT_OFF \
|
|
0x00000000 // Array OFF
|
|
#define SYSCTL_USBPDS_MEMSTAT_RETAIN \
|
|
0x00000004 // SRAM Retention
|
|
#define SYSCTL_USBPDS_MEMSTAT_ON \
|
|
0x0000000C // Array On
|
|
#define SYSCTL_USBPDS_PWRSTAT_M 0x00000003 // Power Domain Status
|
|
#define SYSCTL_USBPDS_PWRSTAT_OFF \
|
|
0x00000000 // OFF
|
|
#define SYSCTL_USBPDS_PWRSTAT_ON \
|
|
0x00000003 // ON
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_USBMPC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_USBMPC_PWRCTL_M 0x00000003 // Memory Array Power Control
|
|
#define SYSCTL_USBMPC_PWRCTL_OFF \
|
|
0x00000000 // Array OFF
|
|
#define SYSCTL_USBMPC_PWRCTL_RETAIN \
|
|
0x00000001 // SRAM Retention
|
|
#define SYSCTL_USBMPC_PWRCTL_ON 0x00000003 // Array On
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_EMACPDS register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_EMACPDS_MEMSTAT_M \
|
|
0x0000000C // Memory Array Power Status
|
|
#define SYSCTL_EMACPDS_MEMSTAT_OFF \
|
|
0x00000000 // Array OFF
|
|
#define SYSCTL_EMACPDS_MEMSTAT_ON \
|
|
0x0000000C // Array On
|
|
#define SYSCTL_EMACPDS_PWRSTAT_M \
|
|
0x00000003 // Power Domain Status
|
|
#define SYSCTL_EMACPDS_PWRSTAT_OFF \
|
|
0x00000000 // OFF
|
|
#define SYSCTL_EMACPDS_PWRSTAT_ON \
|
|
0x00000003 // ON
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_EMACMPC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_EMACMPC_PWRCTL_M 0x00000003 // Memory Array Power Control
|
|
#define SYSCTL_EMACMPC_PWRCTL_OFF \
|
|
0x00000000 // Array OFF
|
|
#define SYSCTL_EMACMPC_PWRCTL_ON \
|
|
0x00000003 // Array On
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_LCDMPC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_LCDMPC_PWRCTL_M 0x00000003 // Memory Array Power Control
|
|
#define SYSCTL_LCDMPC_PWRCTL_OFF \
|
|
0x00000000 // Array OFF
|
|
#define SYSCTL_LCDMPC_PWRCTL_ON 0x00000003 // Array On
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PPWD register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PPWD_P1 0x00000002 // Watchdog Timer 1 Present
|
|
#define SYSCTL_PPWD_P0 0x00000001 // Watchdog Timer 0 Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PPTIMER register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PPTIMER_P7 0x00000080 // 16/32-Bit General-Purpose Timer
|
|
// 7 Present
|
|
#define SYSCTL_PPTIMER_P6 0x00000040 // 16/32-Bit General-Purpose Timer
|
|
// 6 Present
|
|
#define SYSCTL_PPTIMER_P5 0x00000020 // 16/32-Bit General-Purpose Timer
|
|
// 5 Present
|
|
#define SYSCTL_PPTIMER_P4 0x00000010 // 16/32-Bit General-Purpose Timer
|
|
// 4 Present
|
|
#define SYSCTL_PPTIMER_P3 0x00000008 // 16/32-Bit General-Purpose Timer
|
|
// 3 Present
|
|
#define SYSCTL_PPTIMER_P2 0x00000004 // 16/32-Bit General-Purpose Timer
|
|
// 2 Present
|
|
#define SYSCTL_PPTIMER_P1 0x00000002 // 16/32-Bit General-Purpose Timer
|
|
// 1 Present
|
|
#define SYSCTL_PPTIMER_P0 0x00000001 // 16/32-Bit General-Purpose Timer
|
|
// 0 Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PPGPIO register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PPGPIO_P17 0x00020000 // GPIO Port T Present
|
|
#define SYSCTL_PPGPIO_P16 0x00010000 // GPIO Port S Present
|
|
#define SYSCTL_PPGPIO_P15 0x00008000 // GPIO Port R Present
|
|
#define SYSCTL_PPGPIO_P14 0x00004000 // GPIO Port Q Present
|
|
#define SYSCTL_PPGPIO_P13 0x00002000 // GPIO Port P Present
|
|
#define SYSCTL_PPGPIO_P12 0x00001000 // GPIO Port N Present
|
|
#define SYSCTL_PPGPIO_P11 0x00000800 // GPIO Port M Present
|
|
#define SYSCTL_PPGPIO_P10 0x00000400 // GPIO Port L Present
|
|
#define SYSCTL_PPGPIO_P9 0x00000200 // GPIO Port K Present
|
|
#define SYSCTL_PPGPIO_P8 0x00000100 // GPIO Port J Present
|
|
#define SYSCTL_PPGPIO_P7 0x00000080 // GPIO Port H Present
|
|
#define SYSCTL_PPGPIO_P6 0x00000040 // GPIO Port G Present
|
|
#define SYSCTL_PPGPIO_P5 0x00000020 // GPIO Port F Present
|
|
#define SYSCTL_PPGPIO_P4 0x00000010 // GPIO Port E Present
|
|
#define SYSCTL_PPGPIO_P3 0x00000008 // GPIO Port D Present
|
|
#define SYSCTL_PPGPIO_P2 0x00000004 // GPIO Port C Present
|
|
#define SYSCTL_PPGPIO_P1 0x00000002 // GPIO Port B Present
|
|
#define SYSCTL_PPGPIO_P0 0x00000001 // GPIO Port A Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PPDMA register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PPDMA_P0 0x00000001 // uDMA Module Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PPEPI register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PPEPI_P0 0x00000001 // EPI Module Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PPHIB register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PPHIB_P0 0x00000001 // Hibernation Module Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PPUART register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PPUART_P7 0x00000080 // UART Module 7 Present
|
|
#define SYSCTL_PPUART_P6 0x00000040 // UART Module 6 Present
|
|
#define SYSCTL_PPUART_P5 0x00000020 // UART Module 5 Present
|
|
#define SYSCTL_PPUART_P4 0x00000010 // UART Module 4 Present
|
|
#define SYSCTL_PPUART_P3 0x00000008 // UART Module 3 Present
|
|
#define SYSCTL_PPUART_P2 0x00000004 // UART Module 2 Present
|
|
#define SYSCTL_PPUART_P1 0x00000002 // UART Module 1 Present
|
|
#define SYSCTL_PPUART_P0 0x00000001 // UART Module 0 Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PPSSI register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PPSSI_P3 0x00000008 // SSI Module 3 Present
|
|
#define SYSCTL_PPSSI_P2 0x00000004 // SSI Module 2 Present
|
|
#define SYSCTL_PPSSI_P1 0x00000002 // SSI Module 1 Present
|
|
#define SYSCTL_PPSSI_P0 0x00000001 // SSI Module 0 Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PPI2C register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PPI2C_P9 0x00000200 // I2C Module 9 Present
|
|
#define SYSCTL_PPI2C_P8 0x00000100 // I2C Module 8 Present
|
|
#define SYSCTL_PPI2C_P7 0x00000080 // I2C Module 7 Present
|
|
#define SYSCTL_PPI2C_P6 0x00000040 // I2C Module 6 Present
|
|
#define SYSCTL_PPI2C_P5 0x00000020 // I2C Module 5 Present
|
|
#define SYSCTL_PPI2C_P4 0x00000010 // I2C Module 4 Present
|
|
#define SYSCTL_PPI2C_P3 0x00000008 // I2C Module 3 Present
|
|
#define SYSCTL_PPI2C_P2 0x00000004 // I2C Module 2 Present
|
|
#define SYSCTL_PPI2C_P1 0x00000002 // I2C Module 1 Present
|
|
#define SYSCTL_PPI2C_P0 0x00000001 // I2C Module 0 Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PPUSB register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PPUSB_P0 0x00000001 // USB Module Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PPEPHY register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PPEPHY_P0 0x00000001 // Ethernet PHY Module Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PPCAN register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PPCAN_P1 0x00000002 // CAN Module 1 Present
|
|
#define SYSCTL_PPCAN_P0 0x00000001 // CAN Module 0 Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PPADC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PPADC_P1 0x00000002 // ADC Module 1 Present
|
|
#define SYSCTL_PPADC_P0 0x00000001 // ADC Module 0 Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PPACMP register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PPACMP_P0 0x00000001 // Analog Comparator Module Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PPPWM register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PPPWM_P1 0x00000002 // PWM Module 1 Present
|
|
#define SYSCTL_PPPWM_P0 0x00000001 // PWM Module 0 Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PPQEI register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PPQEI_P1 0x00000002 // QEI Module 1 Present
|
|
#define SYSCTL_PPQEI_P0 0x00000001 // QEI Module 0 Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PPEEPROM
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PPEEPROM_P0 0x00000001 // EEPROM Module Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PPCCM register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PPCCM_P0 0x00000001 // CRC and Cryptographic Modules
|
|
// Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PPLCD register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PPLCD_P0 0x00000001 // LCD Module Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PPOWIRE register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PPOWIRE_P0 0x00000001 // 1-Wire Module Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PPEMAC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PPEMAC_P0 0x00000001 // Ethernet Controller Module
|
|
// Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SRWD register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SRWD_R1 0x00000002 // Watchdog Timer 1 Software Reset
|
|
#define SYSCTL_SRWD_R0 0x00000001 // Watchdog Timer 0 Software Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SRTIMER register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SRTIMER_R7 0x00000080 // 16/32-Bit General-Purpose Timer
|
|
// 7 Software Reset
|
|
#define SYSCTL_SRTIMER_R6 0x00000040 // 16/32-Bit General-Purpose Timer
|
|
// 6 Software Reset
|
|
#define SYSCTL_SRTIMER_R5 0x00000020 // 16/32-Bit General-Purpose Timer
|
|
// 5 Software Reset
|
|
#define SYSCTL_SRTIMER_R4 0x00000010 // 16/32-Bit General-Purpose Timer
|
|
// 4 Software Reset
|
|
#define SYSCTL_SRTIMER_R3 0x00000008 // 16/32-Bit General-Purpose Timer
|
|
// 3 Software Reset
|
|
#define SYSCTL_SRTIMER_R2 0x00000004 // 16/32-Bit General-Purpose Timer
|
|
// 2 Software Reset
|
|
#define SYSCTL_SRTIMER_R1 0x00000002 // 16/32-Bit General-Purpose Timer
|
|
// 1 Software Reset
|
|
#define SYSCTL_SRTIMER_R0 0x00000001 // 16/32-Bit General-Purpose Timer
|
|
// 0 Software Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SRGPIO register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SRGPIO_R17 0x00020000 // GPIO Port T Software Reset
|
|
#define SYSCTL_SRGPIO_R16 0x00010000 // GPIO Port S Software Reset
|
|
#define SYSCTL_SRGPIO_R15 0x00008000 // GPIO Port R Software Reset
|
|
#define SYSCTL_SRGPIO_R14 0x00004000 // GPIO Port Q Software Reset
|
|
#define SYSCTL_SRGPIO_R13 0x00002000 // GPIO Port P Software Reset
|
|
#define SYSCTL_SRGPIO_R12 0x00001000 // GPIO Port N Software Reset
|
|
#define SYSCTL_SRGPIO_R11 0x00000800 // GPIO Port M Software Reset
|
|
#define SYSCTL_SRGPIO_R10 0x00000400 // GPIO Port L Software Reset
|
|
#define SYSCTL_SRGPIO_R9 0x00000200 // GPIO Port K Software Reset
|
|
#define SYSCTL_SRGPIO_R8 0x00000100 // GPIO Port J Software Reset
|
|
#define SYSCTL_SRGPIO_R7 0x00000080 // GPIO Port H Software Reset
|
|
#define SYSCTL_SRGPIO_R6 0x00000040 // GPIO Port G Software Reset
|
|
#define SYSCTL_SRGPIO_R5 0x00000020 // GPIO Port F Software Reset
|
|
#define SYSCTL_SRGPIO_R4 0x00000010 // GPIO Port E Software Reset
|
|
#define SYSCTL_SRGPIO_R3 0x00000008 // GPIO Port D Software Reset
|
|
#define SYSCTL_SRGPIO_R2 0x00000004 // GPIO Port C Software Reset
|
|
#define SYSCTL_SRGPIO_R1 0x00000002 // GPIO Port B Software Reset
|
|
#define SYSCTL_SRGPIO_R0 0x00000001 // GPIO Port A Software Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SRDMA register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SRDMA_R0 0x00000001 // uDMA Module Software Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SREPI register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SREPI_R0 0x00000001 // EPI Module Software Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SRHIB register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SRHIB_R0 0x00000001 // Hibernation Module Software
|
|
// Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SRUART register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SRUART_R7 0x00000080 // UART Module 7 Software Reset
|
|
#define SYSCTL_SRUART_R6 0x00000040 // UART Module 6 Software Reset
|
|
#define SYSCTL_SRUART_R5 0x00000020 // UART Module 5 Software Reset
|
|
#define SYSCTL_SRUART_R4 0x00000010 // UART Module 4 Software Reset
|
|
#define SYSCTL_SRUART_R3 0x00000008 // UART Module 3 Software Reset
|
|
#define SYSCTL_SRUART_R2 0x00000004 // UART Module 2 Software Reset
|
|
#define SYSCTL_SRUART_R1 0x00000002 // UART Module 1 Software Reset
|
|
#define SYSCTL_SRUART_R0 0x00000001 // UART Module 0 Software Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SRSSI register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SRSSI_R3 0x00000008 // SSI Module 3 Software Reset
|
|
#define SYSCTL_SRSSI_R2 0x00000004 // SSI Module 2 Software Reset
|
|
#define SYSCTL_SRSSI_R1 0x00000002 // SSI Module 1 Software Reset
|
|
#define SYSCTL_SRSSI_R0 0x00000001 // SSI Module 0 Software Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SRI2C register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SRI2C_R9 0x00000200 // I2C Module 9 Software Reset
|
|
#define SYSCTL_SRI2C_R8 0x00000100 // I2C Module 8 Software Reset
|
|
#define SYSCTL_SRI2C_R7 0x00000080 // I2C Module 7 Software Reset
|
|
#define SYSCTL_SRI2C_R6 0x00000040 // I2C Module 6 Software Reset
|
|
#define SYSCTL_SRI2C_R5 0x00000020 // I2C Module 5 Software Reset
|
|
#define SYSCTL_SRI2C_R4 0x00000010 // I2C Module 4 Software Reset
|
|
#define SYSCTL_SRI2C_R3 0x00000008 // I2C Module 3 Software Reset
|
|
#define SYSCTL_SRI2C_R2 0x00000004 // I2C Module 2 Software Reset
|
|
#define SYSCTL_SRI2C_R1 0x00000002 // I2C Module 1 Software Reset
|
|
#define SYSCTL_SRI2C_R0 0x00000001 // I2C Module 0 Software Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SRUSB register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SRUSB_R0 0x00000001 // USB Module Software Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SREPHY register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SREPHY_R0 0x00000001 // Ethernet PHY Module Software
|
|
// Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SRCAN register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SRCAN_R1 0x00000002 // CAN Module 1 Software Reset
|
|
#define SYSCTL_SRCAN_R0 0x00000001 // CAN Module 0 Software Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SRADC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SRADC_R1 0x00000002 // ADC Module 1 Software Reset
|
|
#define SYSCTL_SRADC_R0 0x00000001 // ADC Module 0 Software Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SRACMP register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SRACMP_R0 0x00000001 // Analog Comparator Module 0
|
|
// Software Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SRPWM register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SRPWM_R1 0x00000002 // PWM Module 1 Software Reset
|
|
#define SYSCTL_SRPWM_R0 0x00000001 // PWM Module 0 Software Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SRQEI register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SRQEI_R1 0x00000002 // QEI Module 1 Software Reset
|
|
#define SYSCTL_SRQEI_R0 0x00000001 // QEI Module 0 Software Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SREEPROM
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SREEPROM_R0 0x00000001 // EEPROM Module Software Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SRCCM register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SRCCM_R0 0x00000001 // CRC and Cryptographic Modules
|
|
// Software Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SRLCD register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SRLCD_R0 0x00000001 // LCD Module 0 Software Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SROWIRE register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SROWIRE_R0 0x00000001 // 1-Wire Module Software Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SREMAC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SREMAC_R0 0x00000001 // Ethernet Controller MAC Module 0
|
|
// Software Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCGCWD register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGCWD_R1 0x00000002 // Watchdog Timer 1 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCWD_R0 0x00000001 // Watchdog Timer 0 Run Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCGCTIMER
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGCTIMER_R7 0x00000080 // 16/32-Bit General-Purpose Timer
|
|
// 7 Run Mode Clock Gating Control
|
|
#define SYSCTL_RCGCTIMER_R6 0x00000040 // 16/32-Bit General-Purpose Timer
|
|
// 6 Run Mode Clock Gating Control
|
|
#define SYSCTL_RCGCTIMER_R5 0x00000020 // 16/32-Bit General-Purpose Timer
|
|
// 5 Run Mode Clock Gating Control
|
|
#define SYSCTL_RCGCTIMER_R4 0x00000010 // 16/32-Bit General-Purpose Timer
|
|
// 4 Run Mode Clock Gating Control
|
|
#define SYSCTL_RCGCTIMER_R3 0x00000008 // 16/32-Bit General-Purpose Timer
|
|
// 3 Run Mode Clock Gating Control
|
|
#define SYSCTL_RCGCTIMER_R2 0x00000004 // 16/32-Bit General-Purpose Timer
|
|
// 2 Run Mode Clock Gating Control
|
|
#define SYSCTL_RCGCTIMER_R1 0x00000002 // 16/32-Bit General-Purpose Timer
|
|
// 1 Run Mode Clock Gating Control
|
|
#define SYSCTL_RCGCTIMER_R0 0x00000001 // 16/32-Bit General-Purpose Timer
|
|
// 0 Run Mode Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCGCGPIO
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGCGPIO_R17 0x00020000 // GPIO Port T Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCGPIO_R16 0x00010000 // GPIO Port S Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCGPIO_R15 0x00008000 // GPIO Port R Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCGPIO_R14 0x00004000 // GPIO Port Q Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCGPIO_R13 0x00002000 // GPIO Port P Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCGPIO_R12 0x00001000 // GPIO Port N Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCGPIO_R11 0x00000800 // GPIO Port M Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCGPIO_R10 0x00000400 // GPIO Port L Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCGPIO_R9 0x00000200 // GPIO Port K Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCGPIO_R8 0x00000100 // GPIO Port J Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCGPIO_R7 0x00000080 // GPIO Port H Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCGPIO_R6 0x00000040 // GPIO Port G Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCGPIO_R5 0x00000020 // GPIO Port F Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCGPIO_R4 0x00000010 // GPIO Port E Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCGPIO_R3 0x00000008 // GPIO Port D Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCGPIO_R2 0x00000004 // GPIO Port C Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCGPIO_R1 0x00000002 // GPIO Port B Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCGPIO_R0 0x00000001 // GPIO Port A Run Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCGCDMA register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGCDMA_R0 0x00000001 // uDMA Module Run Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCGCEPI register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGCEPI_R0 0x00000001 // EPI Module Run Mode Clock Gating
|
|
// Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCGCHIB register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGCHIB_R0 0x00000001 // Hibernation Module Run Mode
|
|
// Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCGCUART
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGCUART_R7 0x00000080 // UART Module 7 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCUART_R6 0x00000040 // UART Module 6 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCUART_R5 0x00000020 // UART Module 5 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCUART_R4 0x00000010 // UART Module 4 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCUART_R3 0x00000008 // UART Module 3 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCUART_R2 0x00000004 // UART Module 2 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCUART_R1 0x00000002 // UART Module 1 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCUART_R0 0x00000001 // UART Module 0 Run Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCGCSSI register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGCSSI_R3 0x00000008 // SSI Module 3 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCSSI_R2 0x00000004 // SSI Module 2 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCSSI_R1 0x00000002 // SSI Module 1 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCSSI_R0 0x00000001 // SSI Module 0 Run Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCGCI2C register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGCI2C_R9 0x00000200 // I2C Module 9 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCI2C_R8 0x00000100 // I2C Module 8 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCI2C_R7 0x00000080 // I2C Module 7 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCI2C_R6 0x00000040 // I2C Module 6 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCI2C_R5 0x00000020 // I2C Module 5 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCI2C_R4 0x00000010 // I2C Module 4 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCI2C_R3 0x00000008 // I2C Module 3 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCI2C_R2 0x00000004 // I2C Module 2 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCI2C_R1 0x00000002 // I2C Module 1 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCI2C_R0 0x00000001 // I2C Module 0 Run Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCGCUSB register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGCUSB_R0 0x00000001 // USB Module Run Mode Clock Gating
|
|
// Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCGCEPHY
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGCEPHY_R0 0x00000001 // Ethernet PHY Module Run Mode
|
|
// Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCGCCAN register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGCCAN_R1 0x00000002 // CAN Module 1 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCCAN_R0 0x00000001 // CAN Module 0 Run Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCGCADC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGCADC_R1 0x00000002 // ADC Module 1 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCADC_R0 0x00000001 // ADC Module 0 Run Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCGCACMP
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGCACMP_R0 0x00000001 // Analog Comparator Module 0 Run
|
|
// Mode Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCGCPWM register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGCPWM_R1 0x00000002 // PWM Module 1 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCPWM_R0 0x00000001 // PWM Module 0 Run Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCGCQEI register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGCQEI_R1 0x00000002 // QEI Module 1 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCQEI_R0 0x00000001 // QEI Module 0 Run Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCGCEEPROM
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGCEEPROM_R0 0x00000001 // EEPROM Module Run Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCGCCCM register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGCCCM_R0 0x00000001 // CRC and Cryptographic Modules
|
|
// Run Mode Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCGCLCD register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGCLCD_R0 0x00000001 // LCD Controller Module 0 Run Mode
|
|
// Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCGCOWIRE
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGCOWIRE_R0 0x00000001 // 1-Wire Module 0 Run Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCGCEMAC
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGCEMAC_R0 0x00000001 // Ethernet MAC Module 0 Run Mode
|
|
// Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SCGCWD register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGCWD_S1 0x00000002 // Watchdog Timer 1 Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_SCGCWD_S0 0x00000001 // Watchdog Timer 0 Sleep Mode
|
|
// Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SCGCTIMER
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGCTIMER_S7 0x00000080 // 16/32-Bit General-Purpose Timer
|
|
// 7 Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_SCGCTIMER_S6 0x00000040 // 16/32-Bit General-Purpose Timer
|
|
// 6 Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_SCGCTIMER_S5 0x00000020 // 16/32-Bit General-Purpose Timer
|
|
// 5 Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_SCGCTIMER_S4 0x00000010 // 16/32-Bit General-Purpose Timer
|
|
// 4 Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_SCGCTIMER_S3 0x00000008 // 16/32-Bit General-Purpose Timer
|
|
// 3 Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_SCGCTIMER_S2 0x00000004 // 16/32-Bit General-Purpose Timer
|
|
// 2 Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_SCGCTIMER_S1 0x00000002 // 16/32-Bit General-Purpose Timer
|
|
// 1 Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_SCGCTIMER_S0 0x00000001 // 16/32-Bit General-Purpose Timer
|
|
// 0 Sleep Mode Clock Gating
|
|
// Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SCGCGPIO
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGCGPIO_S17 0x00020000 // GPIO Port T Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCGPIO_S16 0x00010000 // GPIO Port S Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCGPIO_S15 0x00008000 // GPIO Port R Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCGPIO_S14 0x00004000 // GPIO Port Q Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCGPIO_S13 0x00002000 // GPIO Port P Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCGPIO_S12 0x00001000 // GPIO Port N Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCGPIO_S11 0x00000800 // GPIO Port M Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCGPIO_S10 0x00000400 // GPIO Port L Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCGPIO_S9 0x00000200 // GPIO Port K Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCGPIO_S8 0x00000100 // GPIO Port J Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCGPIO_S7 0x00000080 // GPIO Port H Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCGPIO_S6 0x00000040 // GPIO Port G Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCGPIO_S5 0x00000020 // GPIO Port F Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCGPIO_S4 0x00000010 // GPIO Port E Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCGPIO_S3 0x00000008 // GPIO Port D Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCGPIO_S2 0x00000004 // GPIO Port C Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCGPIO_S1 0x00000002 // GPIO Port B Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCGPIO_S0 0x00000001 // GPIO Port A Sleep Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SCGCDMA register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGCDMA_S0 0x00000001 // uDMA Module Sleep Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SCGCEPI register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGCEPI_S0 0x00000001 // EPI Module Sleep Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SCGCHIB register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGCHIB_S0 0x00000001 // Hibernation Module Sleep Mode
|
|
// Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SCGCUART
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGCUART_S7 0x00000080 // UART Module 7 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCUART_S6 0x00000040 // UART Module 6 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCUART_S5 0x00000020 // UART Module 5 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCUART_S4 0x00000010 // UART Module 4 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCUART_S3 0x00000008 // UART Module 3 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCUART_S2 0x00000004 // UART Module 2 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCUART_S1 0x00000002 // UART Module 1 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCUART_S0 0x00000001 // UART Module 0 Sleep Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SCGCSSI register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGCSSI_S3 0x00000008 // SSI Module 3 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCSSI_S2 0x00000004 // SSI Module 2 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCSSI_S1 0x00000002 // SSI Module 1 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCSSI_S0 0x00000001 // SSI Module 0 Sleep Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SCGCI2C register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGCI2C_S9 0x00000200 // I2C Module 9 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCI2C_S8 0x00000100 // I2C Module 8 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCI2C_S7 0x00000080 // I2C Module 7 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCI2C_S6 0x00000040 // I2C Module 6 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCI2C_S5 0x00000020 // I2C Module 5 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCI2C_S4 0x00000010 // I2C Module 4 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCI2C_S3 0x00000008 // I2C Module 3 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCI2C_S2 0x00000004 // I2C Module 2 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCI2C_S1 0x00000002 // I2C Module 1 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCI2C_S0 0x00000001 // I2C Module 0 Sleep Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SCGCUSB register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGCUSB_S0 0x00000001 // USB Module Sleep Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SCGCEPHY
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGCEPHY_S0 0x00000001 // PHY Module Sleep Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SCGCCAN register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGCCAN_S1 0x00000002 // CAN Module 1 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCCAN_S0 0x00000001 // CAN Module 0 Sleep Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SCGCADC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGCADC_S1 0x00000002 // ADC Module 1 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCADC_S0 0x00000001 // ADC Module 0 Sleep Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SCGCACMP
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGCACMP_S0 0x00000001 // Analog Comparator Module 0 Sleep
|
|
// Mode Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SCGCPWM register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGCPWM_S1 0x00000002 // PWM Module 1 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCPWM_S0 0x00000001 // PWM Module 0 Sleep Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SCGCQEI register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGCQEI_S1 0x00000002 // QEI Module 1 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCQEI_S0 0x00000001 // QEI Module 0 Sleep Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SCGCEEPROM
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGCEEPROM_S0 0x00000001 // EEPROM Module Sleep Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SCGCCCM register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGCCCM_S0 0x00000001 // CRC and Cryptographic Modules
|
|
// Sleep Mode Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SCGCLCD register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGCLCD_S0 0x00000001 // LCD Controller Module 0 Sleep
|
|
// Mode Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SCGCOWIRE
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGCOWIRE_S0 0x00000001 // 1-Wire Module 0 Sleep Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SCGCEMAC
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGCEMAC_S0 0x00000001 // Ethernet MAC Module 0 Sleep Mode
|
|
// Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DCGCWD register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGCWD_D1 0x00000002 // Watchdog Timer 1 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCWD_D0 0x00000001 // Watchdog Timer 0 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DCGCTIMER
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGCTIMER_D7 0x00000080 // 16/32-Bit General-Purpose Timer
|
|
// 7 Deep-Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_DCGCTIMER_D6 0x00000040 // 16/32-Bit General-Purpose Timer
|
|
// 6 Deep-Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_DCGCTIMER_D5 0x00000020 // 16/32-Bit General-Purpose Timer
|
|
// 5 Deep-Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_DCGCTIMER_D4 0x00000010 // 16/32-Bit General-Purpose Timer
|
|
// 4 Deep-Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_DCGCTIMER_D3 0x00000008 // 16/32-Bit General-Purpose Timer
|
|
// 3 Deep-Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_DCGCTIMER_D2 0x00000004 // 16/32-Bit General-Purpose Timer
|
|
// 2 Deep-Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_DCGCTIMER_D1 0x00000002 // 16/32-Bit General-Purpose Timer
|
|
// 1 Deep-Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_DCGCTIMER_D0 0x00000001 // 16/32-Bit General-Purpose Timer
|
|
// 0 Deep-Sleep Mode Clock Gating
|
|
// Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DCGCGPIO
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGCGPIO_D17 0x00020000 // GPIO Port T Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCGPIO_D16 0x00010000 // GPIO Port S Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCGPIO_D15 0x00008000 // GPIO Port R Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCGPIO_D14 0x00004000 // GPIO Port Q Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCGPIO_D13 0x00002000 // GPIO Port P Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCGPIO_D12 0x00001000 // GPIO Port N Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCGPIO_D11 0x00000800 // GPIO Port M Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCGPIO_D10 0x00000400 // GPIO Port L Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCGPIO_D9 0x00000200 // GPIO Port K Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCGPIO_D8 0x00000100 // GPIO Port J Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCGPIO_D7 0x00000080 // GPIO Port H Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCGPIO_D6 0x00000040 // GPIO Port G Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCGPIO_D5 0x00000020 // GPIO Port F Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCGPIO_D4 0x00000010 // GPIO Port E Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCGPIO_D3 0x00000008 // GPIO Port D Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCGPIO_D2 0x00000004 // GPIO Port C Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCGPIO_D1 0x00000002 // GPIO Port B Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCGPIO_D0 0x00000001 // GPIO Port A Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DCGCDMA register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGCDMA_D0 0x00000001 // uDMA Module Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DCGCEPI register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGCEPI_D0 0x00000001 // EPI Module Deep-Sleep Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DCGCHIB register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGCHIB_D0 0x00000001 // Hibernation Module Deep-Sleep
|
|
// Mode Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DCGCUART
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGCUART_D7 0x00000080 // UART Module 7 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCUART_D6 0x00000040 // UART Module 6 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCUART_D5 0x00000020 // UART Module 5 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCUART_D4 0x00000010 // UART Module 4 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCUART_D3 0x00000008 // UART Module 3 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCUART_D2 0x00000004 // UART Module 2 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCUART_D1 0x00000002 // UART Module 1 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCUART_D0 0x00000001 // UART Module 0 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DCGCSSI register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGCSSI_D3 0x00000008 // SSI Module 3 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCSSI_D2 0x00000004 // SSI Module 2 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCSSI_D1 0x00000002 // SSI Module 1 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCSSI_D0 0x00000001 // SSI Module 0 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DCGCI2C register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGCI2C_D9 0x00000200 // I2C Module 9 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCI2C_D8 0x00000100 // I2C Module 8 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCI2C_D7 0x00000080 // I2C Module 7 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCI2C_D6 0x00000040 // I2C Module 6 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCI2C_D5 0x00000020 // I2C Module 5 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCI2C_D4 0x00000010 // I2C Module 4 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCI2C_D3 0x00000008 // I2C Module 3 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCI2C_D2 0x00000004 // I2C Module 2 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCI2C_D1 0x00000002 // I2C Module 1 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCI2C_D0 0x00000001 // I2C Module 0 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DCGCUSB register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGCUSB_D0 0x00000001 // USB Module Deep-Sleep Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DCGCEPHY
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGCEPHY_D0 0x00000001 // PHY Module Deep-Sleep Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DCGCCAN register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGCCAN_D1 0x00000002 // CAN Module 1 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCCAN_D0 0x00000001 // CAN Module 0 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DCGCADC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGCADC_D1 0x00000002 // ADC Module 1 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCADC_D0 0x00000001 // ADC Module 0 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DCGCACMP
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGCACMP_D0 0x00000001 // Analog Comparator Module 0
|
|
// Deep-Sleep Mode Clock Gating
|
|
// Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DCGCPWM register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGCPWM_D1 0x00000002 // PWM Module 1 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCPWM_D0 0x00000001 // PWM Module 0 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DCGCQEI register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGCQEI_D1 0x00000002 // QEI Module 1 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCQEI_D0 0x00000001 // QEI Module 0 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DCGCEEPROM
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGCEEPROM_D0 0x00000001 // EEPROM Module Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DCGCCCM register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGCCCM_D0 0x00000001 // CRC and Cryptographic Modules
|
|
// Deep-Sleep Mode Clock Gating
|
|
// Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DCGCLCD register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGCLCD_D0 0x00000001 // LCD Controller Module 0
|
|
// Deep-Sleep Mode Clock Gating
|
|
// Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DCGCOWIRE
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGCOWIRE_D0 0x00000001 // 1-Wire Module 0 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DCGCEMAC
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGCEMAC_D0 0x00000001 // Ethernet MAC Module 0 Deep-Sleep
|
|
// Mode Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PCWD register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PCWD_P1 0x00000002 // Watchdog Timer 1 Power Control
|
|
#define SYSCTL_PCWD_P0 0x00000001 // Watchdog Timer 0 Power Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PCTIMER register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PCTIMER_P7 0x00000080 // General-Purpose Timer 7 Power
|
|
// Control
|
|
#define SYSCTL_PCTIMER_P6 0x00000040 // General-Purpose Timer 6 Power
|
|
// Control
|
|
#define SYSCTL_PCTIMER_P5 0x00000020 // General-Purpose Timer 5 Power
|
|
// Control
|
|
#define SYSCTL_PCTIMER_P4 0x00000010 // General-Purpose Timer 4 Power
|
|
// Control
|
|
#define SYSCTL_PCTIMER_P3 0x00000008 // General-Purpose Timer 3 Power
|
|
// Control
|
|
#define SYSCTL_PCTIMER_P2 0x00000004 // General-Purpose Timer 2 Power
|
|
// Control
|
|
#define SYSCTL_PCTIMER_P1 0x00000002 // General-Purpose Timer 1 Power
|
|
// Control
|
|
#define SYSCTL_PCTIMER_P0 0x00000001 // General-Purpose Timer 0 Power
|
|
// Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PCGPIO register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PCGPIO_P17 0x00020000 // GPIO Port T Power Control
|
|
#define SYSCTL_PCGPIO_P16 0x00010000 // GPIO Port S Power Control
|
|
#define SYSCTL_PCGPIO_P15 0x00008000 // GPIO Port R Power Control
|
|
#define SYSCTL_PCGPIO_P14 0x00004000 // GPIO Port Q Power Control
|
|
#define SYSCTL_PCGPIO_P13 0x00002000 // GPIO Port P Power Control
|
|
#define SYSCTL_PCGPIO_P12 0x00001000 // GPIO Port N Power Control
|
|
#define SYSCTL_PCGPIO_P11 0x00000800 // GPIO Port M Power Control
|
|
#define SYSCTL_PCGPIO_P10 0x00000400 // GPIO Port L Power Control
|
|
#define SYSCTL_PCGPIO_P9 0x00000200 // GPIO Port K Power Control
|
|
#define SYSCTL_PCGPIO_P8 0x00000100 // GPIO Port J Power Control
|
|
#define SYSCTL_PCGPIO_P7 0x00000080 // GPIO Port H Power Control
|
|
#define SYSCTL_PCGPIO_P6 0x00000040 // GPIO Port G Power Control
|
|
#define SYSCTL_PCGPIO_P5 0x00000020 // GPIO Port F Power Control
|
|
#define SYSCTL_PCGPIO_P4 0x00000010 // GPIO Port E Power Control
|
|
#define SYSCTL_PCGPIO_P3 0x00000008 // GPIO Port D Power Control
|
|
#define SYSCTL_PCGPIO_P2 0x00000004 // GPIO Port C Power Control
|
|
#define SYSCTL_PCGPIO_P1 0x00000002 // GPIO Port B Power Control
|
|
#define SYSCTL_PCGPIO_P0 0x00000001 // GPIO Port A Power Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PCDMA register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PCDMA_P0 0x00000001 // uDMA Module Power Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PCEPI register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PCEPI_P0 0x00000001 // EPI Module Power Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PCHIB register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PCHIB_P0 0x00000001 // Hibernation Module Power Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PCUART register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PCUART_P7 0x00000080 // UART Module 7 Power Control
|
|
#define SYSCTL_PCUART_P6 0x00000040 // UART Module 6 Power Control
|
|
#define SYSCTL_PCUART_P5 0x00000020 // UART Module 5 Power Control
|
|
#define SYSCTL_PCUART_P4 0x00000010 // UART Module 4 Power Control
|
|
#define SYSCTL_PCUART_P3 0x00000008 // UART Module 3 Power Control
|
|
#define SYSCTL_PCUART_P2 0x00000004 // UART Module 2 Power Control
|
|
#define SYSCTL_PCUART_P1 0x00000002 // UART Module 1 Power Control
|
|
#define SYSCTL_PCUART_P0 0x00000001 // UART Module 0 Power Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PCSSI register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PCSSI_P3 0x00000008 // SSI Module 3 Power Control
|
|
#define SYSCTL_PCSSI_P2 0x00000004 // SSI Module 2 Power Control
|
|
#define SYSCTL_PCSSI_P1 0x00000002 // SSI Module 1 Power Control
|
|
#define SYSCTL_PCSSI_P0 0x00000001 // SSI Module 0 Power Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PCI2C register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PCI2C_P9 0x00000200 // I2C Module 9 Power Control
|
|
#define SYSCTL_PCI2C_P8 0x00000100 // I2C Module 8 Power Control
|
|
#define SYSCTL_PCI2C_P7 0x00000080 // I2C Module 7 Power Control
|
|
#define SYSCTL_PCI2C_P6 0x00000040 // I2C Module 6 Power Control
|
|
#define SYSCTL_PCI2C_P5 0x00000020 // I2C Module 5 Power Control
|
|
#define SYSCTL_PCI2C_P4 0x00000010 // I2C Module 4 Power Control
|
|
#define SYSCTL_PCI2C_P3 0x00000008 // I2C Module 3 Power Control
|
|
#define SYSCTL_PCI2C_P2 0x00000004 // I2C Module 2 Power Control
|
|
#define SYSCTL_PCI2C_P1 0x00000002 // I2C Module 1 Power Control
|
|
#define SYSCTL_PCI2C_P0 0x00000001 // I2C Module 0 Power Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PCUSB register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PCUSB_P0 0x00000001 // USB Module Power Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PCEPHY register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PCEPHY_P0 0x00000001 // Ethernet PHY Module Power
|
|
// Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PCCAN register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PCCAN_P1 0x00000002 // CAN Module 1 Power Control
|
|
#define SYSCTL_PCCAN_P0 0x00000001 // CAN Module 0 Power Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PCADC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PCADC_P1 0x00000002 // ADC Module 1 Power Control
|
|
#define SYSCTL_PCADC_P0 0x00000001 // ADC Module 0 Power Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PCACMP register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PCACMP_P0 0x00000001 // Analog Comparator Module 0 Power
|
|
// Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PCPWM register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PCPWM_P0 0x00000001 // PWM Module 0 Power Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PCQEI register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PCQEI_P0 0x00000001 // QEI Module 0 Power Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PCEEPROM
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PCEEPROM_P0 0x00000001 // EEPROM Module 0 Power Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PCCCM register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PCCCM_P0 0x00000001 // CRC and Cryptographic Modules
|
|
// Power Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PCLCD register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PCLCD_P0 0x00000001 // LCD Controller Module 0 Power
|
|
// Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PCOWIRE register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PCOWIRE_P0 0x00000001 // 1-Wire Module 0 Power Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PCEMAC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PCEMAC_P0 0x00000001 // Ethernet MAC Module 0 Power
|
|
// Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PRWD register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PRWD_R1 0x00000002 // Watchdog Timer 1 Peripheral
|
|
// Ready
|
|
#define SYSCTL_PRWD_R0 0x00000001 // Watchdog Timer 0 Peripheral
|
|
// Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PRTIMER register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PRTIMER_R7 0x00000080 // 16/32-Bit General-Purpose Timer
|
|
// 7 Peripheral Ready
|
|
#define SYSCTL_PRTIMER_R6 0x00000040 // 16/32-Bit General-Purpose Timer
|
|
// 6 Peripheral Ready
|
|
#define SYSCTL_PRTIMER_R5 0x00000020 // 16/32-Bit General-Purpose Timer
|
|
// 5 Peripheral Ready
|
|
#define SYSCTL_PRTIMER_R4 0x00000010 // 16/32-Bit General-Purpose Timer
|
|
// 4 Peripheral Ready
|
|
#define SYSCTL_PRTIMER_R3 0x00000008 // 16/32-Bit General-Purpose Timer
|
|
// 3 Peripheral Ready
|
|
#define SYSCTL_PRTIMER_R2 0x00000004 // 16/32-Bit General-Purpose Timer
|
|
// 2 Peripheral Ready
|
|
#define SYSCTL_PRTIMER_R1 0x00000002 // 16/32-Bit General-Purpose Timer
|
|
// 1 Peripheral Ready
|
|
#define SYSCTL_PRTIMER_R0 0x00000001 // 16/32-Bit General-Purpose Timer
|
|
// 0 Peripheral Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PRGPIO register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PRGPIO_R17 0x00020000 // GPIO Port T Peripheral Ready
|
|
#define SYSCTL_PRGPIO_R16 0x00010000 // GPIO Port S Peripheral Ready
|
|
#define SYSCTL_PRGPIO_R15 0x00008000 // GPIO Port R Peripheral Ready
|
|
#define SYSCTL_PRGPIO_R14 0x00004000 // GPIO Port Q Peripheral Ready
|
|
#define SYSCTL_PRGPIO_R13 0x00002000 // GPIO Port P Peripheral Ready
|
|
#define SYSCTL_PRGPIO_R12 0x00001000 // GPIO Port N Peripheral Ready
|
|
#define SYSCTL_PRGPIO_R11 0x00000800 // GPIO Port M Peripheral Ready
|
|
#define SYSCTL_PRGPIO_R10 0x00000400 // GPIO Port L Peripheral Ready
|
|
#define SYSCTL_PRGPIO_R9 0x00000200 // GPIO Port K Peripheral Ready
|
|
#define SYSCTL_PRGPIO_R8 0x00000100 // GPIO Port J Peripheral Ready
|
|
#define SYSCTL_PRGPIO_R7 0x00000080 // GPIO Port H Peripheral Ready
|
|
#define SYSCTL_PRGPIO_R6 0x00000040 // GPIO Port G Peripheral Ready
|
|
#define SYSCTL_PRGPIO_R5 0x00000020 // GPIO Port F Peripheral Ready
|
|
#define SYSCTL_PRGPIO_R4 0x00000010 // GPIO Port E Peripheral Ready
|
|
#define SYSCTL_PRGPIO_R3 0x00000008 // GPIO Port D Peripheral Ready
|
|
#define SYSCTL_PRGPIO_R2 0x00000004 // GPIO Port C Peripheral Ready
|
|
#define SYSCTL_PRGPIO_R1 0x00000002 // GPIO Port B Peripheral Ready
|
|
#define SYSCTL_PRGPIO_R0 0x00000001 // GPIO Port A Peripheral Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PRDMA register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PRDMA_R0 0x00000001 // uDMA Module Peripheral Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PREPI register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PREPI_R0 0x00000001 // EPI Module Peripheral Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PRHIB register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PRHIB_R0 0x00000001 // Hibernation Module Peripheral
|
|
// Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PRUART register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PRUART_R7 0x00000080 // UART Module 7 Peripheral Ready
|
|
#define SYSCTL_PRUART_R6 0x00000040 // UART Module 6 Peripheral Ready
|
|
#define SYSCTL_PRUART_R5 0x00000020 // UART Module 5 Peripheral Ready
|
|
#define SYSCTL_PRUART_R4 0x00000010 // UART Module 4 Peripheral Ready
|
|
#define SYSCTL_PRUART_R3 0x00000008 // UART Module 3 Peripheral Ready
|
|
#define SYSCTL_PRUART_R2 0x00000004 // UART Module 2 Peripheral Ready
|
|
#define SYSCTL_PRUART_R1 0x00000002 // UART Module 1 Peripheral Ready
|
|
#define SYSCTL_PRUART_R0 0x00000001 // UART Module 0 Peripheral Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PRSSI register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PRSSI_R3 0x00000008 // SSI Module 3 Peripheral Ready
|
|
#define SYSCTL_PRSSI_R2 0x00000004 // SSI Module 2 Peripheral Ready
|
|
#define SYSCTL_PRSSI_R1 0x00000002 // SSI Module 1 Peripheral Ready
|
|
#define SYSCTL_PRSSI_R0 0x00000001 // SSI Module 0 Peripheral Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PRI2C register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PRI2C_R9 0x00000200 // I2C Module 9 Peripheral Ready
|
|
#define SYSCTL_PRI2C_R8 0x00000100 // I2C Module 8 Peripheral Ready
|
|
#define SYSCTL_PRI2C_R7 0x00000080 // I2C Module 7 Peripheral Ready
|
|
#define SYSCTL_PRI2C_R6 0x00000040 // I2C Module 6 Peripheral Ready
|
|
#define SYSCTL_PRI2C_R5 0x00000020 // I2C Module 5 Peripheral Ready
|
|
#define SYSCTL_PRI2C_R4 0x00000010 // I2C Module 4 Peripheral Ready
|
|
#define SYSCTL_PRI2C_R3 0x00000008 // I2C Module 3 Peripheral Ready
|
|
#define SYSCTL_PRI2C_R2 0x00000004 // I2C Module 2 Peripheral Ready
|
|
#define SYSCTL_PRI2C_R1 0x00000002 // I2C Module 1 Peripheral Ready
|
|
#define SYSCTL_PRI2C_R0 0x00000001 // I2C Module 0 Peripheral Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PRUSB register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PRUSB_R0 0x00000001 // USB Module Peripheral Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PREPHY register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PREPHY_R0 0x00000001 // Ethernet PHY Module Peripheral
|
|
// Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PRCAN register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PRCAN_R1 0x00000002 // CAN Module 1 Peripheral Ready
|
|
#define SYSCTL_PRCAN_R0 0x00000001 // CAN Module 0 Peripheral Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PRADC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PRADC_R1 0x00000002 // ADC Module 1 Peripheral Ready
|
|
#define SYSCTL_PRADC_R0 0x00000001 // ADC Module 0 Peripheral Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PRACMP register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PRACMP_R0 0x00000001 // Analog Comparator Module 0
|
|
// Peripheral Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PRPWM register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PRPWM_R1 0x00000002 // PWM Module 1 Peripheral Ready
|
|
#define SYSCTL_PRPWM_R0 0x00000001 // PWM Module 0 Peripheral Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PRQEI register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PRQEI_R1 0x00000002 // QEI Module 1 Peripheral Ready
|
|
#define SYSCTL_PRQEI_R0 0x00000001 // QEI Module 0 Peripheral Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PREEPROM
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PREEPROM_R0 0x00000001 // EEPROM Module Peripheral Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PRCCM register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PRCCM_R0 0x00000001 // CRC and Cryptographic Modules
|
|
// Peripheral Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PRLCD register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PRLCD_R0 0x00000001 // LCD Controller Module 0
|
|
// Peripheral Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PROWIRE register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PROWIRE_R0 0x00000001 // 1-Wire Module 0 Peripheral Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PREMAC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PREMAC_R0 0x00000001 // Ethernet MAC Module 0 Peripheral
|
|
// Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_UNIQUEID0
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_UNIQUEID0_ID_M 0xFFFFFFFF // Unique ID
|
|
#define SYSCTL_UNIQUEID0_ID_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_UNIQUEID1
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_UNIQUEID1_ID_M 0xFFFFFFFF // Unique ID
|
|
#define SYSCTL_UNIQUEID1_ID_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_UNIQUEID2
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_UNIQUEID2_ID_M 0xFFFFFFFF // Unique ID
|
|
#define SYSCTL_UNIQUEID2_ID_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_UNIQUEID3
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_UNIQUEID3_ID_M 0xFFFFFFFF // Unique ID
|
|
#define SYSCTL_UNIQUEID3_ID_S 0
|
|
|
|
// //*****************************************************************************
|
|
// //
|
|
// // The following are defines for the bit fields in the SYSCTL_CCMCGREQ
|
|
// // register.
|
|
// //
|
|
// //*****************************************************************************
|
|
// #define SYSCTL_CCMCGREQ_DESCFG 0x00000004 // DES Clock Gating Request
|
|
// #define SYSCTL_CCMCGREQ_AESCFG 0x00000002 // AES Clock Gating Request
|
|
// #define SYSCTL_CCMCGREQ_SHACFG 0x00000001 // SHA/MD5 Clock Gating Request
|
|
|
|
#endif // __HW_SYSCTL_H__
|