rt-thread-official/bsp/imxrt/libraries/MIMXRT1020/MIMXRT1021/drivers/fsl_ewm.h

219 lines
6.1 KiB
C

/*
* Copyright (c) 2015, Freescale Semiconductor, Inc.
* Copyright 2016-2017, 2020 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef _FSL_EWM_H_
#define _FSL_EWM_H_
#include "fsl_common.h"
/*!
* @addtogroup ewm
* @{
*/
/*******************************************************************************
* Definitions
*******************************************************************************/
/*! @name Driver version */
/*@{*/
/*! @brief EWM driver version 2.0.3. */
#define FSL_EWM_DRIVER_VERSION (MAKE_VERSION(2, 0, 3))
/*@}*/
/*! @brief Describes EWM clock source. */
#if defined(FSL_FEATURE_EWM_HAS_CLOCK_SELECT) && FSL_FEATURE_EWM_HAS_CLOCK_SELECT
typedef enum _ewm_lpo_clock_source
{
kEWM_LpoClockSource0 = 0U, /*!< EWM clock sourced from lpo_clk[0]*/
kEWM_LpoClockSource1 = 1U, /*!< EWM clock sourced from lpo_clk[1]*/
kEWM_LpoClockSource2 = 2U, /*!< EWM clock sourced from lpo_clk[2]*/
kEWM_LpoClockSource3 = 3U, /*!< EWM clock sourced from lpo_clk[3]*/
} ewm_lpo_clock_source_t;
#endif /* FSL_FEATURE_EWM_HAS_CLOCK_SELECT */
/*!
* @brief Data structure for EWM configuration.
*
* This structure is used to configure the EWM.
*/
typedef struct _ewm_config
{
bool enableEwm; /*!< Enable EWM module */
bool enableEwmInput; /*!< Enable EWM_in input */
bool setInputAssertLogic; /*!< EWM_in signal assertion state */
bool enableInterrupt; /*!< Enable EWM interrupt */
#if defined(FSL_FEATURE_EWM_HAS_CLOCK_SELECT) && FSL_FEATURE_EWM_HAS_CLOCK_SELECT
ewm_lpo_clock_source_t clockSource; /*!< Clock source select */
#endif /* FSL_FEATURE_EWM_HAS_CLOCK_SELECT */
#if defined(FSL_FEATURE_EWM_HAS_PRESCALER) && FSL_FEATURE_EWM_HAS_PRESCALER
uint8_t prescaler; /*!< Clock prescaler value */
#endif /* FSL_FEATURE_EWM_HAS_PRESCALER */
uint8_t compareLowValue; /*!< Compare low-register value */
uint8_t compareHighValue; /*!< Compare high-register value */
} ewm_config_t;
/*!
* @brief EWM interrupt configuration structure with default settings all disabled.
*
* This structure contains the settings for all of EWM interrupt configurations.
*/
enum _ewm_interrupt_enable_t
{
kEWM_InterruptEnable = EWM_CTRL_INTEN_MASK, /*!< Enable the EWM to generate an interrupt*/
};
/*!
* @brief EWM status flags.
*
* This structure contains the constants for the EWM status flags for use in the EWM functions.
*/
enum _ewm_status_flags_t
{
kEWM_RunningFlag = EWM_CTRL_EWMEN_MASK, /*!< Running flag, set when EWM is enabled*/
};
/*******************************************************************************
* API
*******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif /* __cplusplus */
/*!
* @name EWM initialization and de-initialization
* @{
*/
/*!
* @brief Initializes the EWM peripheral.
*
* This function is used to initialize the EWM. After calling, the EWM
* runs immediately according to the configuration.
* Note that, except for the interrupt enable control bit, other control bits and registers are write once after a
* CPU reset. Modifying them more than once generates a bus transfer error.
*
* This is an example.
* @code
* ewm_config_t config;
* EWM_GetDefaultConfig(&config);
* config.compareHighValue = 0xAAU;
* EWM_Init(ewm_base,&config);
* @endcode
*
* @param base EWM peripheral base address
* @param config The configuration of the EWM
*/
void EWM_Init(EWM_Type *base, const ewm_config_t *config);
/*!
* @brief Deinitializes the EWM peripheral.
*
* This function is used to shut down the EWM.
*
* @param base EWM peripheral base address
*/
void EWM_Deinit(EWM_Type *base);
/*!
* @brief Initializes the EWM configuration structure.
*
* This function initializes the EWM configuration structure to default values. The default
* values are as follows.
* @code
* ewmConfig->enableEwm = true;
* ewmConfig->enableEwmInput = false;
* ewmConfig->setInputAssertLogic = false;
* ewmConfig->enableInterrupt = false;
* ewmConfig->ewm_lpo_clock_source_t = kEWM_LpoClockSource0;
* ewmConfig->prescaler = 0;
* ewmConfig->compareLowValue = 0;
* ewmConfig->compareHighValue = 0xFEU;
* @endcode
*
* @param config Pointer to the EWM configuration structure.
* @see ewm_config_t
*/
void EWM_GetDefaultConfig(ewm_config_t *config);
/* @} */
/*!
* @name EWM functional Operation
* @{
*/
/*!
* @brief Enables the EWM interrupt.
*
* This function enables the EWM interrupt.
*
* @param base EWM peripheral base address
* @param mask The interrupts to enable
* The parameter can be combination of the following source if defined
* @arg kEWM_InterruptEnable
*/
static inline void EWM_EnableInterrupts(EWM_Type *base, uint32_t mask)
{
base->CTRL |= (uint8_t)mask;
}
/*!
* @brief Disables the EWM interrupt.
*
* This function enables the EWM interrupt.
*
* @param base EWM peripheral base address
* @param mask The interrupts to disable
* The parameter can be combination of the following source if defined
* @arg kEWM_InterruptEnable
*/
static inline void EWM_DisableInterrupts(EWM_Type *base, uint32_t mask)
{
base->CTRL &= (uint8_t)(~mask);
}
/*!
* @brief Gets all status flags.
*
* This function gets all status flags.
*
* This is an example for getting the running flag.
* @code
* uint32_t status;
* status = EWM_GetStatusFlags(ewm_base) & kEWM_RunningFlag;
* @endcode
* @param base EWM peripheral base address
* @return State of the status flag: asserted (true) or not-asserted (false).@see _ewm_status_flags_t
* - True: a related status flag has been set.
* - False: a related status flag is not set.
*/
static inline uint32_t EWM_GetStatusFlags(EWM_Type *base)
{
return ((uint32_t)base->CTRL & EWM_CTRL_EWMEN_MASK);
}
/*!
* @brief Services the EWM.
*
* This function resets the EWM counter to zero.
*
* @param base EWM peripheral base address
*/
void EWM_Refresh(EWM_Type *base);
/*@}*/
#if defined(__cplusplus)
}
#endif /* __cplusplus */
/*! @}*/
#endif /* _FSL_EWM_H_ */