152 lines
4.6 KiB
C
152 lines
4.6 KiB
C
/*
|
|
* Copyright (C) 2022-2024, Xiaohua Semiconductor Co., Ltd.
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Change Logs:
|
|
* Date Author Notes
|
|
* 2022-04-28 CDT first version
|
|
*/
|
|
|
|
#include "board.h"
|
|
#include "board_config.h"
|
|
|
|
/* unlock/lock peripheral */
|
|
#define EXAMPLE_PERIPH_WE (LL_PERIPH_GPIO | LL_PERIPH_EFM | LL_PERIPH_FCG | \
|
|
LL_PERIPH_PWC_CLK_RMU | LL_PERIPH_SRAM)
|
|
#define EXAMPLE_PERIPH_WP (LL_PERIPH_EFM | LL_PERIPH_FCG | LL_PERIPH_SRAM)
|
|
|
|
#if defined(BSP_USING_USBD) || defined(BSP_USING_USBH)
|
|
/**
|
|
* @brief Switch clock stable time
|
|
* @note Approx. 30us
|
|
*/
|
|
#define CLK_SYSCLK_SW_STB (HCLK_VALUE / 50000UL)
|
|
/**
|
|
* @brief Clk delay function
|
|
* @param [in] u32Delay count
|
|
* @retval when switch clock source, should be delay some time to wait stable.
|
|
*/
|
|
static void CLK_Delay(uint32_t u32Delay)
|
|
{
|
|
__IO uint32_t u32Timeout = 0UL;
|
|
|
|
while (u32Timeout < u32Delay)
|
|
{
|
|
u32Timeout++;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/** System Base Configuration
|
|
*/
|
|
void SystemBase_Config(void)
|
|
{
|
|
#if defined(BSP_USING_ON_CHIP_FLASH_CACHE)
|
|
EFM_CacheCmd(ENABLE);
|
|
#endif
|
|
}
|
|
|
|
/** System Clock Configuration
|
|
*/
|
|
void SystemClock_Config(void)
|
|
{
|
|
stc_clock_xtal_init_t stcXtalInit;
|
|
stc_clock_pll_init_t stcMpllInit;
|
|
#if defined(BSP_USING_USBD) || defined(BSP_USING_USBH)
|
|
stc_clock_pllx_init_t stcUpllInit;
|
|
#endif
|
|
#if defined(BSP_RTC_USING_XTAL32) || defined(RT_USING_PM)
|
|
stc_clock_xtal32_init_t stcXtal32Init;
|
|
#endif
|
|
|
|
/* PCLK0, HCLK Max 200MHz */
|
|
/* PCLK1, PCLK4 Max 100MHz */
|
|
/* PCLK2, PCLK3 Max 50MHz */
|
|
/* EX BUS Max 100MHz */
|
|
CLK_SetClockDiv(CLK_BUS_CLK_ALL, (CLK_HCLK_DIV1 | CLK_EXCLK_DIV2 | CLK_PCLK0_DIV1 | CLK_PCLK1_DIV2 | \
|
|
CLK_PCLK2_DIV4 | CLK_PCLK3_DIV4 | CLK_PCLK4_DIV2));
|
|
|
|
GPIO_AnalogCmd(XTAL_PORT, XTAL_IN_PIN | XTAL_OUT_PIN, ENABLE);
|
|
(void)CLK_XtalStructInit(&stcXtalInit);
|
|
/* Config Xtal and enable Xtal */
|
|
stcXtalInit.u8Mode = CLK_XTAL_MD_OSC;
|
|
stcXtalInit.u8Drv = CLK_XTAL_DRV_ULOW;
|
|
stcXtalInit.u8State = CLK_XTAL_ON;
|
|
stcXtalInit.u8StableTime = CLK_XTAL_STB_2MS;
|
|
(void)CLK_XtalInit(&stcXtalInit);
|
|
|
|
(void)CLK_PLLStructInit(&stcMpllInit);
|
|
/* MPLL config (XTAL / pllmDiv * plln / PllpDiv = 200M). */
|
|
stcMpllInit.u8PLLState = CLK_PLL_ON;
|
|
stcMpllInit.PLLCFGR = 0UL;
|
|
stcMpllInit.PLLCFGR_f.PLLM = 1UL - 1UL;
|
|
stcMpllInit.PLLCFGR_f.PLLN = 50UL - 1UL;
|
|
stcMpllInit.PLLCFGR_f.PLLP = 2UL - 1UL;
|
|
stcMpllInit.PLLCFGR_f.PLLQ = 2UL - 1UL;
|
|
stcMpllInit.PLLCFGR_f.PLLR = 2UL - 1UL;
|
|
stcMpllInit.PLLCFGR_f.PLLSRC = CLK_PLL_SRC_XTAL;
|
|
(void)CLK_PLLInit(&stcMpllInit);
|
|
|
|
/* sram init include read/write wait cycle setting */
|
|
SRAM_SetWaitCycle(SRAM_SRAMH, SRAM_WAIT_CYCLE0, SRAM_WAIT_CYCLE0);
|
|
SRAM_SetWaitCycle((SRAM_SRAM12 | SRAM_SRAM3 | SRAM_SRAMR), SRAM_WAIT_CYCLE1, SRAM_WAIT_CYCLE1);
|
|
|
|
/* flash read wait cycle setting */
|
|
(void)EFM_SetWaitCycle(EFM_WAIT_CYCLE5);
|
|
/* 3 cycles for 126MHz ~ 200MHz */
|
|
GPIO_SetReadWaitCycle(GPIO_RD_WAIT3);
|
|
/* Switch driver ability */
|
|
(void)PWC_HighSpeedToHighPerformance();
|
|
/* Switch system clock source to MPLL. */
|
|
CLK_SetSysClockSrc(CLK_SYSCLK_SRC_PLL);
|
|
|
|
#if defined(BSP_USING_USBD) || defined(BSP_USING_USBH)
|
|
/* PLLX for USB */
|
|
(void)CLK_PLLxStructInit(&stcUpllInit);
|
|
/* VCO = (8/2)*120 = 480MHz*/
|
|
stcUpllInit.u8PLLState = CLK_PLL_ON;
|
|
stcUpllInit.PLLCFGR = 0UL;
|
|
stcUpllInit.PLLCFGR_f.PLLM = 2UL - 1UL;
|
|
stcUpllInit.PLLCFGR_f.PLLN = 120UL - 1UL;
|
|
stcUpllInit.PLLCFGR_f.PLLP = 10UL - 1UL;
|
|
stcUpllInit.PLLCFGR_f.PLLQ = 6UL - 1UL;
|
|
stcUpllInit.PLLCFGR_f.PLLR = 6UL - 1UL;
|
|
(void)CLK_PLLxInit(&stcUpllInit);
|
|
#endif
|
|
|
|
#if defined(BSP_RTC_USING_XTAL32) || defined(RT_USING_PM)
|
|
/* Xtal32 config */
|
|
GPIO_AnalogCmd(XTAL32_PORT, XTAL32_IN_PIN | XTAL32_OUT_PIN, ENABLE);
|
|
(void)CLK_Xtal32StructInit(&stcXtal32Init);
|
|
stcXtal32Init.u8State = CLK_XTAL32_ON;
|
|
stcXtal32Init.u8Drv = CLK_XTAL32_DRV_HIGH;
|
|
stcXtal32Init.u8Filter = CLK_XTAL32_FILTER_RUN_MD;
|
|
(void)CLK_Xtal32Init(&stcXtal32Init);
|
|
#endif
|
|
}
|
|
|
|
/** Peripheral Clock Configuration
|
|
*/
|
|
void PeripheralClock_Config(void)
|
|
{
|
|
#if defined(RT_USING_ADC)
|
|
CLK_SetPeriClockSrc(CLK_PERIPHCLK_PCLK);
|
|
#endif
|
|
|
|
#if defined(BSP_USING_USBD) || defined(BSP_USING_USBH)
|
|
CLK_SetUSBClockSrc(CLK_USBCLK_PLLXP);
|
|
/* Wait stable here, since the current DDL API does not include this */
|
|
CLK_Delay(CLK_SYSCLK_SW_STB);
|
|
#endif
|
|
}
|
|
|
|
/** Peripheral Registers Unlock
|
|
*/
|
|
void PeripheralRegister_Unlock(void)
|
|
{
|
|
LL_PERIPH_WE(EXAMPLE_PERIPH_WE);
|
|
}
|
|
|
|
/*@}*/
|