rt-thread-official/libcpu/arm/zynqmp-r5/gic.c

209 lines
6.1 KiB
C

/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2020-03-19 WangHuachen first version
*/
#include <rtthread.h>
#include "board.h"
#include "gic.h"
/* ZynqMP-RPU uses the Arm PL-390 generic interrupt controller that is
* compliant to the GICv1 architecture specification. */
struct arm_gic
{
rt_uint32_t offset;
rt_uint32_t dist_hw_base;
rt_uint32_t cpu_hw_base;
};
static struct arm_gic _gic_table[ARM_GIC_MAX_NR];
#define GIC_CPU_CTRL(hw_base) __REG32((hw_base) + 0x00)
#define GIC_CPU_PRIMASK(hw_base) __REG32((hw_base) + 0x04)
#define GIC_CPU_BINPOINT(hw_base) __REG32((hw_base) + 0x08)
#define GIC_CPU_INTACK(hw_base) __REG32((hw_base) + 0x0c)
#define GIC_CPU_EOI(hw_base) __REG32((hw_base) + 0x10)
#define GIC_CPU_RUNNINGPRI(hw_base) __REG32((hw_base) + 0x14)
#define GIC_CPU_HIGHPRI(hw_base) __REG32((hw_base) + 0x18)
#define GIC_DIST_CTRL(hw_base) __REG32((hw_base) + 0x000)
#define GIC_DIST_TYPE(hw_base) __REG32((hw_base) + 0x004)
#define GIC_DIST_IGROUP(hw_base, n) __REG32((hw_base) + 0x080 + ((n)/32) * 4)
#define GIC_DIST_ENABLE_SET(hw_base, n) __REG32((hw_base) + 0x100 + ((n)/32) * 4)
#define GIC_DIST_ENABLE_CLEAR(hw_base, n) __REG32((hw_base) + 0x180 + ((n)/32) * 4)
#define GIC_DIST_PENDING_SET(hw_base, n) __REG32((hw_base) + 0x200 + ((n)/32) * 4)
#define GIC_DIST_PENDING_CLEAR(hw_base, n) __REG32((hw_base) + 0x280 + ((n)/32) * 4)
#define GIC_DIST_ACTIVE_SET(hw_base, n) __REG32((hw_base) + 0x300 + ((n)/32) * 4)
#define GIC_DIST_PRI(hw_base, n) __REG32((hw_base) + 0x400 + ((n)/4) * 4)
#define GIC_DIST_TARGET(hw_base, n) __REG32((hw_base) + 0x800 + ((n)/4) * 4)
#define GIC_DIST_CONFIG(hw_base, n) __REG32((hw_base) + 0xc00 + ((n)/16) * 4)
#define GIC_DIST_SOFTINT(hw_base) __REG32((hw_base) + 0xf00)
#define GIC_DIST_ICPIDR2(hw_base) __REG32((hw_base) + 0xfe8)
static unsigned int _gic_max_irq;
int arm_gic_get_active_irq(rt_uint32_t index)
{
int irq;
RT_ASSERT(index < ARM_GIC_MAX_NR);
irq = GIC_CPU_INTACK(_gic_table[index].cpu_hw_base);
irq += _gic_table[index].offset;
return irq;
}
void arm_gic_ack(rt_uint32_t index, int irq)
{
rt_uint32_t mask = 1 << (irq % 32);
RT_ASSERT(index < ARM_GIC_MAX_NR);
irq = irq - _gic_table[index].offset;
RT_ASSERT(irq >= 0);
GIC_DIST_ENABLE_CLEAR(_gic_table[index].dist_hw_base, irq) = mask;
GIC_CPU_EOI(_gic_table[index].cpu_hw_base) = irq;
GIC_DIST_ENABLE_SET(_gic_table[index].dist_hw_base, irq) = mask;
}
void arm_gic_mask(rt_uint32_t index, int irq)
{
rt_uint32_t mask = 1 << (irq % 32);
RT_ASSERT(index < ARM_GIC_MAX_NR);
irq = irq - _gic_table[index].offset;
RT_ASSERT(irq >= 0);
GIC_DIST_ENABLE_CLEAR(_gic_table[index].dist_hw_base, irq) = mask;
}
void arm_gic_set_cpu(rt_uint32_t index, int irq, unsigned int cpumask)
{
rt_uint32_t old_tgt;
RT_ASSERT(index < ARM_GIC_MAX_NR);
irq = irq - _gic_table[index].offset;
RT_ASSERT(irq >= 0);
old_tgt = GIC_DIST_TARGET(_gic_table[index].dist_hw_base, irq);
old_tgt &= ~(0x0FFUL << ((irq % 4)*8));
old_tgt |= cpumask << ((irq % 4)*8);
GIC_DIST_TARGET(_gic_table[index].dist_hw_base, irq) = old_tgt;
}
void arm_gic_umask(rt_uint32_t index, int irq)
{
rt_uint32_t mask = 1 << (irq % 32);
RT_ASSERT(index < ARM_GIC_MAX_NR);
irq = irq - _gic_table[index].offset;
RT_ASSERT(irq >= 0);
GIC_DIST_ENABLE_SET(_gic_table[index].dist_hw_base, irq) = mask;
}
void arm_gic_dump_type(rt_uint32_t index)
{
unsigned int gic_type;
gic_type = GIC_DIST_TYPE(_gic_table[index].dist_hw_base);
rt_kprintf("GICv%d on %p, max IRQs: %d, %s security extension(%08x)\n",
(GIC_DIST_ICPIDR2(_gic_table[index].dist_hw_base) >> 4) & 0xf,
_gic_table[index].dist_hw_base,
_gic_max_irq,
gic_type & (1 << 10) ? "has" : "no",
gic_type);
}
int arm_gic_dist_init(rt_uint32_t index, rt_uint32_t dist_base, int irq_start)
{
unsigned int gic_type, i;
rt_uint32_t cpumask = 1 << 0;
RT_ASSERT(index < ARM_GIC_MAX_NR);
_gic_table[index].dist_hw_base = dist_base;
_gic_table[index].offset = irq_start;
/* Find out how many interrupts are supported. */
gic_type = GIC_DIST_TYPE(dist_base);
_gic_max_irq = ((gic_type & 0x1f) + 1) * 32;
/*
* The GIC only supports up to 1020 interrupt sources.
* Limit this to either the architected maximum, or the
* platform maximum.
*/
if (_gic_max_irq > 1020)
_gic_max_irq = 1020;
if (_gic_max_irq > ARM_GIC_NR_IRQS)
_gic_max_irq = ARM_GIC_NR_IRQS;
cpumask |= cpumask << 8;
cpumask |= cpumask << 16;
GIC_DIST_CTRL(dist_base) = 0x0;
/* Set all global interrupts to be level triggered, active low. */
for (i = 32; i < _gic_max_irq; i += 16)
GIC_DIST_CONFIG(dist_base, i) = 0x0;
/* Set all global interrupts to this CPU only. */
for (i = 32; i < _gic_max_irq; i += 4)
GIC_DIST_TARGET(dist_base, i) = cpumask;
/* Set priority on all interrupts. */
for (i = 0; i < _gic_max_irq; i += 4)
GIC_DIST_PRI(dist_base, i) = 0xa0a0a0a0;
/* Disable all interrupts. */
for (i = 0; i < _gic_max_irq; i += 32)
GIC_DIST_ENABLE_CLEAR(dist_base, i) = 0xffffffff;
/* Enable interrupt. */
GIC_DIST_CTRL(dist_base) = 0x01;
return 0;
}
int arm_gic_cpu_init(rt_uint32_t index, rt_uint32_t cpu_base)
{
RT_ASSERT(index < ARM_GIC_MAX_NR);
_gic_table[index].cpu_hw_base = cpu_base;
GIC_CPU_PRIMASK(cpu_base) = 0xf0;
/* Enable CPU interrupt */
GIC_CPU_CTRL(cpu_base) = 0x01;
return 0;
}
void arm_gic_trigger(rt_uint32_t index, int target_cpu, int irq)
{
unsigned int reg;
RT_ASSERT(irq <= 15);
RT_ASSERT(target_cpu <= 255);
reg = (target_cpu << 16) | irq;
GIC_DIST_SOFTINT(_gic_table[index].dist_hw_base) = reg;
}
void arm_gic_clear_sgi(rt_uint32_t index, int target_cpu, int irq)
{
/* SGI will be cleared automatically. */
}