140 lines
6.3 KiB
C
140 lines
6.3 KiB
C
#ifndef __SWM320_SDIO_H__
|
|
#define __SWM320_SDIO_H__
|
|
|
|
|
|
#define SD_CMD_GO_IDLE_STATE ((uint8_t)0)
|
|
#define SD_CMD_SEND_OP_COND ((uint8_t)1)
|
|
#define SD_CMD_ALL_SEND_CID ((uint8_t)2)
|
|
#define SD_CMD_SET_REL_ADDR ((uint8_t)3)
|
|
#define SD_CMD_SET_DSR ((uint8_t)4)
|
|
#define SD_CMD_HS_SWITCH ((uint8_t)6)
|
|
#define SD_CMD_SEL_DESEL_CARD ((uint8_t)7)
|
|
#define SD_CMD_SEND_IF_COND ((uint8_t)8)
|
|
#define SD_CMD_SEND_CSD ((uint8_t)9)
|
|
#define SD_CMD_SEND_CID ((uint8_t)10)
|
|
#define SD_CMD_STOP_TRANSMISSION ((uint8_t)12)
|
|
#define SD_CMD_SEND_STATUS ((uint8_t)13)
|
|
#define SD_CMD_SET_BLOCKLEN ((uint8_t)16)
|
|
#define SD_CMD_READ_SINGLE_BLOCK ((uint8_t)17)
|
|
#define SD_CMD_READ_MULT_BLOCK ((uint8_t)18)
|
|
#define SD_CMD_WRITE_SINGLE_BLOCK ((uint8_t)24)
|
|
#define SD_CMD_WRITE_MULT_BLOCK ((uint8_t)25)
|
|
#define SD_CMD_PROG_CID ((uint8_t)26)
|
|
#define SD_CMD_PROG_CSD ((uint8_t)27)
|
|
#define SD_CMD_APP_CMD ((uint8_t)55)
|
|
|
|
/*Following commands are SD Card Specific commands.
|
|
SDIO_APP_CMD should be sent before sending these commands. */
|
|
#define SD_CMD_APP_SD_SET_BUSWIDTH ((uint8_t)6)
|
|
#define SD_CMD_SD_APP_STAUS ((uint8_t)13)
|
|
#define SD_CMD_SD_APP_SEND_NUM_WRITE_BLOCKS ((uint8_t)22)
|
|
#define SD_CMD_SD_APP_OP_COND ((uint8_t)41)
|
|
#define SD_CMD_SD_APP_SET_CLR_CARD_DETECT ((uint8_t)42)
|
|
#define SD_CMD_SD_APP_SEND_SCR ((uint8_t)51)
|
|
#define SD_CMD_SDIO_RW_DIRECT ((uint8_t)52)
|
|
#define SD_CMD_SDIO_RW_EXTENDED ((uint8_t)53)
|
|
|
|
|
|
#define SD_RESP_NO 0 //0 ÎÞÏìÓ¦
|
|
#define SD_RESP_32b 2 //2 32λÏìÓ¦
|
|
#define SD_RESP_128b 1 //1 128λÏìÓ¦
|
|
#define SD_RESP_32b_busy 3 //3 32λÏìÓ¦£¬check Busy after response
|
|
|
|
#define SD_CLK_400KHz 0
|
|
#define SD_CLK_20MHz 1
|
|
|
|
#define SD_BUSWIDTH_1b 0
|
|
#define SD_BUSWIDTH_4b 2
|
|
|
|
#define SD_RES_OK 0
|
|
#define SD_RES_ERR 1
|
|
|
|
|
|
typedef struct
|
|
{
|
|
__IO uint8_t CSDStruct; // CSD structure
|
|
__IO uint8_t SysSpecVersion; // System specification version
|
|
__IO uint8_t Reserved1; // Reserved
|
|
__IO uint8_t TAAC; // Data read access-time 1
|
|
__IO uint8_t NSAC; // Data read access-time 2 in CLK cycles
|
|
__IO uint8_t MaxBusClkFrec; // Max. bus clock frequency
|
|
__IO uint16_t CardComdClasses; //< Card command classes
|
|
__IO uint8_t RdBlockLen; // Max. read data block length
|
|
__IO uint8_t PartBlockRead; // Partial blocks for read allowed
|
|
__IO uint8_t WrBlockMisalign; // Write block misalignment
|
|
__IO uint8_t RdBlockMisalign; // Read block misalignment
|
|
__IO uint8_t DSRImpl; // DSR implemented
|
|
__IO uint8_t Reserved2; // Reserved
|
|
__IO uint32_t DeviceSize; // Device Size
|
|
__IO uint8_t MaxRdCurrentVDDMin; // Max. read current @ VDD min
|
|
__IO uint8_t MaxRdCurrentVDDMax; // Max. read current @ VDD max
|
|
__IO uint8_t MaxWrCurrentVDDMin; // Max. write current @ VDD min
|
|
__IO uint8_t MaxWrCurrentVDDMax; // Max. write current @ VDD max
|
|
__IO uint8_t DeviceSizeMul; // Device size multiplier
|
|
__IO uint8_t EraseGrSize; // Erase group size
|
|
__IO uint8_t EraseGrMul; // Erase group size multiplier
|
|
__IO uint8_t WrProtectGrSize; // Write protect group size
|
|
__IO uint8_t WrProtectGrEnable; // Write protect group enable
|
|
__IO uint8_t ManDeflECC; // Manufacturer default ECC
|
|
__IO uint8_t WrSpeedFact; // Write speed factor
|
|
__IO uint8_t MaxWrBlockLen; // Max. write data block length
|
|
__IO uint8_t WriteBlockPaPartial; // Partial blocks for write allowed
|
|
__IO uint8_t Reserved3; // Reserded
|
|
__IO uint8_t ContentProtectAppli; // Content protection application
|
|
__IO uint8_t FileFormatGrouop; // File format group
|
|
__IO uint8_t CopyFlag; // Copy flag (OTP)
|
|
__IO uint8_t PermWrProtect; // Permanent write protection
|
|
__IO uint8_t TempWrProtect; // Temporary write protection
|
|
__IO uint8_t FileFormat; // File Format
|
|
__IO uint8_t ECC; // ECC code
|
|
} SD_CSD;
|
|
|
|
typedef struct
|
|
{
|
|
__IO uint8_t ManufacturerID; // ManufacturerID
|
|
__IO uint16_t OEM_AppliID; // OEM/Application ID
|
|
__IO uint32_t ProdName1; // Product Name part1
|
|
__IO uint8_t ProdName2; // Product Name part2
|
|
__IO uint8_t ProdRev; // Product Revision
|
|
__IO uint32_t ProdSN; // Product Serial Number
|
|
__IO uint8_t Reserved1; // Reserved1
|
|
__IO uint16_t ManufactDate; // Manufacturing Date
|
|
} SD_CID;
|
|
|
|
|
|
#define SDIO_STD_CAPACITY_SD_CARD_V1_1 ((uint32_t)0x00000000)
|
|
#define SDIO_STD_CAPACITY_SD_CARD_V2_0 ((uint32_t)0x00000001)
|
|
#define SDIO_HIGH_CAPACITY_SD_CARD ((uint32_t)0x00000002)
|
|
#define SDIO_MULTIMEDIA_CARD ((uint32_t)0x00000003)
|
|
#define SDIO_SECURE_DIGITAL_IO_CARD ((uint32_t)0x00000004)
|
|
#define SDIO_HIGH_SPEED_MULTIMEDIA_CARD ((uint32_t)0x00000005)
|
|
#define SDIO_SECURE_DIGITAL_IO_COMBO_CARD ((uint32_t)0x00000006)
|
|
#define SDIO_HIGH_CAPACITY_MMC_CARD ((uint32_t)0x00000007)
|
|
|
|
|
|
typedef struct
|
|
{
|
|
SD_CSD SD_csd;
|
|
SD_CID SD_cid;
|
|
uint64_t CardCapacity; // Card Capacity
|
|
uint32_t CardBlockSize; // Card Block Size
|
|
uint16_t RCA;
|
|
uint8_t CardType;
|
|
} SD_CardInfo;
|
|
|
|
|
|
extern SD_CardInfo SD_cardInfo;
|
|
|
|
uint32_t SDIO_Init(void);
|
|
void SDIO_BlockWrite(uint32_t block_addr, uint32_t buff[]);
|
|
void SDIO_BlockRead(uint32_t block_addr, uint32_t buff[]);
|
|
|
|
void SDIO_SendCmd(uint32_t cmd, uint32_t arg, uint32_t resp_type, uint32_t *resp_data, uint32_t have_data, uint32_t data_read);
|
|
|
|
void parseCID(uint32_t CID_Tab[4]);
|
|
void parseCSD(uint32_t CID_Tab[4]);
|
|
|
|
uint32_t calcSDCLKDiv(uint32_t freq_sel);
|
|
|
|
#endif //__SWM320_SDIO_H__
|